BRING NEW LIFE TO CLOTHING.
ISTEAM
USER MANUAL
USER MANUAL
2 // 5
DANGER
Close parent supervision is necessary for any
appliance that is used near children.
Do not leave your isteam unaended while
connected.
It is possible that you might burn yourself while
using your isteam. Use carefully and never turn
your isteam upside down because hot water may
pour from the water deposit.
WARNING
To reduce the risk of contact with hot water coming
from steam vents, check the water level and the
indicator light on your isteam before each use. Use
this appliance for its intended use only.
To reduce the risk of electric shock, do not immerse
your isteam in water or other liquids.
Never pull out the cord to disconnect from the
outlet, instead, grasp the plug and pull to disconnect
completely before puing it away. Place the cord
loosely when storing.
Always keep your isteam disconnected from any
electrical outlet when lling it with water, when
emptying it, and when it is not in use.
Do not operate your isteam when the cord is
damaged, or if the appliance has been dropped or
damaged.
To reduce the risk of electric shock, do not
disassemble or aempt to repair your isteam if
damaged. Return it to the Service Center for repair.
An incorrect reassembly or repair could result into
a re, electric shock, or injury when the appliance is
used.
USER MANUAL
3 // 5
WARNING
Never drop or insert any object into the steam vents
of the nozzle.
Do not use the isteam outdoors, operate it where
aerosol products are being used or where oxygen is
being manipulated.
e surface of your isteam may get hot when it will
be in use. Always use a handle to avoid burning your
skin.
Do not place the steam nozzle directly on any
surface or on the appliance power cord while it is
not or plugged in.
Unplug your isteam before lling or emptying the
water tank. Never ll water past the maximum level.
FEATURES
We’ve designed your isteam to give you a portable yet powerful steaming experience. Some of the
features that you will enjoy with this product include:
• New nozzle design that distributes steam powerfully and consistently to remove stubborn wrinkles.
• Compact design that makes the isteam easily to store and travel with Safe to use on all types of fabric.
• Heats quickly to emit wrinkle-busting steam.
• Includes an automatic shut-o feature for safety protection when the unit gets too hot or too low on
water level.
• High-captivity, easy ll water tank that lasts for 10 minutes of continuous steaming.
• 2 Year Warranty-Your satisfaction is guaranteed!
To reduce the risk of a circuit overload, do not
operate another high-voltage appliance on the
same circuit.
Do not use an io extension cord to operate the
appliance. If an extension cord is absolutely
necessary, then a 15 amp rated extension cord
should be used. Bare in mind that extension cords
with less amperage may overheat.
Be careful when arranging the cord so it cannot be
pulled or tripped over.
ank you for purchasing your isteam, the perfect
tool to keep your wardrobe and household fabrics
fresh and wrinkle-free. Use it daily to easily and
quickly revive all your clothing.
USER MANUAL
4 // 5
HOW TO OPERATE YOUR ISTEAM
1. Unscrew the nozzle head, ll the tank with cold water up to the desired level, never exceed the maximum
level. When nishing, lock the head back on.
2. Turn ON/OFF switch to ON position. e switch light indicates the steamer is on. e steamer will emit
steam from a nozzle in 1 minute.
3. When the unit runs out of the water, it will reset itself automatically to ensure your safety while leaving
the indicator light ON. If you wish to continue your steaming session, turn ON/OFF switch to the OFF
position, rell the water tank by following step 1 again, then turn ON/OFF switch to ON position.
4. When nished, place the ON/OFF switch in the OFF position and remove the plug carefully from the
outlet.
NOTE: Never turn the unit upside down. Your steamer should never be tilted past a 45-degree angle,
especially when the unit is ON. For perfect use - please use a hanger to hang your clothes while
steaming.
CLEANING YOUR ISTEAM
1. Unscrew the head and allow your isteam to cool for at least 10 minutes.
2. Empty any water remain from the water tank and allow it to air dry before replacing the head and seing
the tank back in the unit.
USER MANUAL
5 // 5
STORING YOUR ISTEAM
1. Store it in a cool dry place.
2. DO NOT wrap the power cord around the unit,
place it loosely.
NOTE: Water containing mineral levels will vary depending on
the place where you live in. To ensure the continuous operation
of the steamer, never store it without cleaning and removing
excess water from the water container or tank.
If you ll your isteam with tap water, you may experience
mineral build-up due to the high mineral content in the water
supply in many cities. Mineral residue inside your isteam’s
internal heater may cause intermient steaming or, in severe
cases no steaming at all.
To avoid the problem, only use de-mineralized or distilled
water in your isteam. If you are unable to use de-mineralized
or distilled water, we recommend you to follow the cleaning
procedure below at least once a month to help avoid mineral
build-up.
Your isteam fails to heat
Your isteam should heat within t wo minutes. If aer t wo minutes your isteam is still cool, check the following:
1. Make sure the steamer is plug ged into an electrical outlet .
2. Fill the water tank. e automatic shut-o feature prevent s your isteam from heating when the water level is low.
Your isteam is not emiing steam
If your isteam is not emiing steam, the water level is too low. Turn the ON/OFF switch o and rell .
Water is spraying from the nozzle
If your isteam is spraying water from the noz zle, the water tank is too full. Pour some water out until the water level is under the maximum level .
Nozzle gurgles
If the nozzle of your isteam makes a gurgling sound there is condensation around the noz zle. is is normal. Hold the steamer ver tically and shake the body to allow
water to drain back into the tank.
Steam ows intermiently
If your isteam is not emiing a continuous ow of steam, sediment build-up is likely to be the problem. Follow the procedure for removing mineral build up of this
User Manual explained above.
1. Turn the unit o and unplug the power cord.
2. Prepare a mixture of 50% vinegar and 50%
water, in most cases 1 cup of this mixture will be
enough.
3. Slowly pour the water-vinegar mixture into the
water. Pour it out three minutes later.
4. If the procedure above does not return the unit
to a normal operation, the unit may need to be
checked by the product supplier.
If your isteam is not operating properly, please
check if it is related to any of the following
problems or conditions. If you are still unable to
detect and solve the problem, please contact us
for a replacement.
Loading...