Sim2 CRYSTAL CUBE Quick Start
The Remote Control
The Remote Control Functions
Items Description
Power OFF Turns the projector o
1.
HDMI 2 Displays the HDMI 2 source selection
2.
PC Displays the PC source selection
3.
VIDEO Displays the VIDEO source selection
4.
Up cursor/Keystone + Navigates and changes settings in the OSD
5.
ENTER Enters and conrms settings in the OSD
6.
Right cursor Navigates and changes settings in the OSD
7.
Down cursor
8.
ASPECT RATIO Displays the ASSPECT RATIO selections
9.
SOURCE Detects the input device
10.
2D „ 3D Toggle 3D function
11.
BRIGHT Displays the brightness setting bar
12.
SHARP Displays the sharpness setting bar
13.
COLOR Displays the color setting bar
14.
TINT Displays the tint setting bar
15.
BLANK Makes the screen blank
16.
FREEZE Freezes/unfreezes the on-screen picture
17.
AUTO Auto adjustment for frequency, phase, and
18.
LIGHT Turns on or o the remote control backlight
19.
VOL - Adjust the volume of the audio out
20.
VOL +
21.
MUTE Mutes the audio out
22.
CONTRAST Displays the contrast settings bar
23.
PICTURE MODE Changes the Display Mode setting
24.
MENU/EXIT Opens and exits the OSD
25.
Left cursor Navigates and changes settings in the OSD
26.
COMP Displays the Component source selection
27.
HDMI 1 Displays the HDMI 1 source selection
28.
Power ON Turns the projector on
29.
IR transmitter Transmits signals to projector
30.
Quick Menu – For Keystone
position
for about 10 seconds. Pressing any other key
while the backlight is on keeps the backlight
on for a further 10 seconds.
CRYSTALcube
Quick Start Guide
Quick Start Guide
www.sim2.com
AC IN ~ 100-240V
Zoom
Focus
1
CRYSTALcube
Quick Start Guide
1. Connect Power
2.Connect Input Device(s)
To The Projector
3. Power On & Select Source 5. Adjust Zoom & Focus
4. Projector positioning
6. Ready! Set! Action!
For ceiling mounting instructions, please see the Crystal Cube Installation Guide and User Manual available at www.sim2.com
Loading...