SIGMA PC 26.14 User Manual

HEART RATE MONITOR

ZONE INDICATOR

KCAL

MORE
INFORMATION

EN

WWW.SIGMA-QR.COM

PC 26.14

1

ENGLISH

Contents

1

2 Configuration 8

3 Training with the PC 26.14 15

Display, button functions, and navigation in
the overview

Display, button functions, and

1



navigation in the overview

3

k Waking up the device:

You will receive your PC 26.14 in transport mode to
conserve the battery and must therefore wake it up
before its first use. This can be done as follows:

EN

4 Accessing the memory 21

5 Disposal 24

6 Warranty conditions 24

Foreword

Thank you for choosing a SIGMA SPORT® heart rate monitor.

Your new PC 26.14 will be a loyal companion for you during sport and
recreation for years to come. The PC 26.14 is a technically demanding
measuring instrument. To familiarize yourself with and learn how to use
the many functions of your new heart rate monitor, please read these
operating instructions carefully.

SIGMA SPORT® wishes you hours of fun and enjoyment with your PC 26.14.

1.1 Display layout

The display is basically divided into three areas:

To exit transport mode and activate the PC 26.14,
please press and hold the START button for at least
five seconds, as shown on the foil. “Language English”
then appears on the display.

Area 1: Presentation of the (training) values –
heart rate and laps

Area 2: Presentation of the currently selected
functions, menu items and the
applicable data

Area 3: Scrolling information for clear menu
guidance and navigation

Further information and notes

For further information and to view our frequently asked questions (FAQs),
please visit www.sigmasport.com.

Please consult your doctor before you start training – especially if you suffer
from any underlying cardiovascular problems.

2 3

1.2 Button functions

The PC 26.14 has five buttons:
TOGGLE/-, TOGGLE/+, STOP, START, and ENTER

STOP button:

This button takes you back a level
within the menu structure. In training
mode, stop the training session by
pressing this button.

Resetting training data without
saving: Press and hold the STOP

button.

TOGGLE/- and
TOGGLE/+ buttons:

TOGGLE/+ enables you to navigate to the
right in the main menu; TOGGLE/- takes
you back again. If you are at a point at which
values can be configured, use TOGGLE/+
to set a higher value and TOGGLE/- to set
a lower value.

Activating/deactivating the light mode

Press the TOGGLE/- AND TOGGLE/+
buttons simultaneously. Pressing the
buttons simultaneously a second time
switches the display backlight off again.
The light stays on for approx. three seconds.

ENTER button:

Use this button to access the main
menu and confirm the entries.

You can navigate in the submenu
of the applicable menu item and
access any further sub-items
available.

START button:

Press the START button to start
training.

Pressing the START button again
while training marks a lap.

If you have paused a training
session by pressing the STOP
button, you can restart the timer by
pressing the START button again.

Lap view:

Press and hold the START button.
Press the STOP button to exit
lap view.

EN

4 5

1.3 Navigation

STOP

ENTER

Level 0Level 1Level 2Level 3 (zoom view)

TOGGLE– +

TOGGLE

Main menu

Training Memory

Lap time +
stopwatch

Stopwatch maximum

Lap time

heart rate +

maximum
heart rate

Avg. heart rate

heart rate

Avg.

Calories

burned +

clock

Calories burned

Clock

Intensity

zones

Target zone +

% HR max.

Training User Device FavoritesTotal

Training 1
Training 2
Training 3
Training 4
Training 5
Training 6
Training 7

* Only visible

once a training

session has

been completed.

Week

Month

Since

6 7

Settings

Gender

Language

Date of birth

Weight

HR max.

Target zone

Intensity zones Contrast

Date

Clock

Alarm

Reset total

Button tone

Zone alarm

Lock

Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9

Press ENTER to move to the next levels down

EN

Press STOP to go back a level

Configuration

2

2.2 Alarm tones

2.1 Device

As shown in the navigation overview (section 1.3), to
access the menu item “Set” press the ENTER button
and then scroll to “Setting” by pressing the TOGGLE/+
button. Finally, press the ENTER button again.

Select “Device” from the settings menu to configure
basic settings for the device, such as the language,
date and time, tones, or contrast etc.

As described in the previous sections, use the
TOGGLE/+ and TOGGLE/- buttons to select the
values and the ENTER button to confirm your settings.
If you want to go back a level, press the STOP button.

After each setting is made, the text “Setting OK”
appears on the display.

If the upper target zone limit is breached, the device beeps three times every
20 seconds (for as long as you are training outside the zone).

If the lower limit is breached, a longer beep is emitted.

2.3 Key lock

To prevent training sessions from being started by
accident, the buttons can be locked. To do this,
go to the “Device” menu and navigate to “Key Lock”.
To deactivate the lock press any button followed by
the ENTER button.

2.4User

On opening the “Setting” submenu, the user settings
appear.

To access a further submenu within the user settings,
press the ENTER button.

If, for example, you want to change the “Gender” from
male to female, press ENTER.

EN

“Male” flashes as the current selection and can be
changed to “Female” by pressing the TOGGLE/+
button. Confirm your setting by pressing ENTER.

8 9