Sigma ONYX EASY User manual

Heart rate Monitors

TOPLINE

ONYX easY

DGBFIENL

DeUtsCH

enGLisH

FranÇais

itaLiano

esPaÑoL

neDerLanDs

CONTENT

1. Foreword and package contents 29

2. Basic operation principle 30

2.1 Function summary (tree diagram) 30

2.2 Key occupancy and navigation principle 32

2.3 Fixing the chest belt /
attaching the handlebar holder 33

2.4 Measuring the heartbeat 34

3. Settings before the first training
k Main menu Setting 37

3.1 Setting User 38

3.2 Setting Unit 40

4. Main menu Training 41

5. Main menu Time 42

6. Main menu Memory 45

6.1 Total values 45

6.2 Memory 46

7. Other information 47

7.1 Information on heart rate 47

7.2 FAQ 49

7.3 Beep summary 50

7.4 Troubleshooting 51

7.5 Changing the battery /waterproofing
and warranty 52

28

www.sigmasport.com

29

GB

1. FOREWORD AND PACKAGE CONTENTS

Congratulations on choosing a heart rate
monitor from SIGMA SPORT

®

. Your new
ONYX EASY will be a faithful companion for
sport and leisure for many years to come.

The ONYX EASY is a technically demanding
measuring device. In order to learn and apply
the varied functions of your new heart rate
monitor, please read this user manual carefully.

SIGMA SPORT® wishes you a lot of fun using
your ONYX EASY.

Heart rate monitor ONYX EASY.

k ECG-accurate
kApproved to medical standards

Chest belt with digitally coded radio
transmission.

Handlebar holder to use the ONYX EASY
on the bike with an O ring.

2. BASIC OPERATION PRINCIPLE

2.1 FUNCTION SUMMARY

TimeTraining

training

Clock1 zone

Date

Stopwatch

Countdown

Alarm

Memory

Total Values1 Memory

Per Week

Per Month

Since Reset

30

www.sigmasport.com

31

GB

2. BASIC OPERATION PRINCIPLE

2.1 FUNCTION SUMMARY

Setting

UnitUser

(training zone)

LanguageGender

DateBirthday

ClockWeight

VolumeHR Max.

Button tonesT. zone

Zone Alarm

My Name

2.1 FUNCTION SUMMARY

The 4 main menus of the ONYX EASY

Your ONYX EASY is classified into 4 main menus
– “Training”, “Time”, “Memory” and “Setting”.

The symbol and description on the screen
indicates where you are in the main menu. Use
the PLUS /MINUS buttons to change between
the individual main menus.

2.2 KEY ALLOCATION AND NAVIGATION PRINCIPLE

The ONYX EASY uses three menu levels. When navigating through
the menus and sub-menus of the ONYX EASY the user can always
refer to the tree diagram in Chapter 2.1 “Function summary”.

The menu navigation on the ONYX EASY is made much simpler by
the navigation level. The navigation level always appears when you
press one of the two upper function buttons.

32

www.sigmasport.com

33

GB

2.2 KEY ALLOCATION AND NAVIGATION PRINCIPLE

The possible button functions for the two upper buttons are shown
in the navigation level in order to:

k Move to the next deeper level (ENTER)
k Go back to the next higher level (BACK /OFF)
k Start training (START)
k End training (END)

Confirm the function shown in the navigation level by pressing the
button again. Use the two lower buttons PLUS /MINUS to change
between the individual menu options on one level.

2.3 FIXING THE CHEST BELT /HANDLEBAR HOLDER

Connect the transmitter with the elastic belt.

Use the adjusting mechanism to individually
adapt the length of the belt.

Ensure that you set the length of the belt so
that it sits well but is not too tight.

2.3 FIXING THE CHEST BELT /HANDLEBAR HOLDER

Place the belt such that for men the transmitter
is below the chest muscles and for women below
the breasts.

The SIGMA logo must always be readable from
the front.

Lift the belt slightly from the skin. Dampen the
ribbed zones (electrodes) on the rear of the
transmitter with salvia or cardio gel.

Assemble the handlebar holder.

Then fix the handlebar holder with the O ring
and close the wristband.

2.4 MEASURING THE HEARTBEAT

When you are not training your ONYX EASY is in
sleep mode and can be worn as a normal watch.
Before and after training the screen shows the
date, time and product name.

34

www.sigmasport.com

35

GB

2.4 MEASURING THE HEARTBEAT

You can enter another word with up to
10 characters under the ONYX EASY font
(my name function). Please refer to Chapter

3.2 “Setting unit”.

To activate your ONYX EASY hold down any
button for two seconds. The clock changes to
active mode and you enter the training main
menu.

Note: At the start always refer to the tree
diagram shown in 2.1.

Synchronisation of Watch and Chestbelt

Your ONYX EASY is equipped with a digitally coded chestbelt that
enables you to have interference free training.