Siemens TI9553X1RW User Manual

Fully automatic espresso machine Machine à expresso automatique Volautomatische espressomachine Ekspres do kawy

Plně automatický kávovar

Автоматическая кофемашина

TI955... connect, TI957... connect

en	Instruction manual .......................................................................	6
fr	Mode d’emploi ...........................................................................	42
nl	Gebruiksaanwijzing ....................................................................	80
pl	Instrukcja obsługi .....................................................................	118
cs	Návod k použití ........................................................................	156
ru	ǪȋǻǽȃȆǻ ȊȉȆȗȂȉǽǻȈȃȚ ............................................................	191

& .

!

( 1U ««« )'« «

"

,

,,

			,,,				,9

,

,,

FO FN

,,,

,9

#

,

,,

,,,

FO FN

,

,,

,,,

$

%

&

	U VV
	P [
,	,,

,,,	,9	9
'

(

en

Table of contents

8 Intended use . . . . . . . . . . . . . . . . 7

( Important safety information . . . 7

7 Environmental protection . . . . . 9

Saving energy . . . . . . . . . . . . . . . . . . . 9 Environmentally-friendly disposal . . . . . 9

* Getting to know your appliance10

Included in delivery . . . . . . . . . . . . . .10 Assembly and components . . . . . . . .10 Controls . . . . . . . . . . . . . . . . . . . . . . .11

_ Accessories. . . . . . . . . . . . . . . . 12

K Before using for the first time . 13

Installing and connecting the

appliance . . . . . . . . . . . . . . . . . . . . . .13 Commissioning the appliance . . . . . .13

1 Operating the appliance. . . . . . 15

Selecting a drink . . . . . . . . . . . . . . . .15

Preparing coffee using freshly ground beans. . . . . . . . . . . . . . . . . . . . . . . . .17

Preparing coffee using ground coffee17 Preparing drinks with milk . . . . . . . . .18 Dispensing hot water . . . . . . . . . . . . .19 Adjusting beverage settings . . . . . . .19 Setting the grinding level . . . . . . . . . .21 Cup warmer . . . . . . . . . . . . . . . . . . . .22

P Customising . . . . . . . . . . . . . . . 22

Creating a user profile . . . . . . . . . . . .22 Editing or deleting user profile. . . . . .23 Saving individual drinks . . . . . . . . . . .23

A Childproof lock . . . . . . . . . . . . . 24

Activating the child-proof lock . . . . . .24 Deactivating the child-proof lock . . . .24

Q Menu settings . . . . . . . . . . . . . . .24

Changing settings . . . . . . . . . . . . . . 24

Starting the "Water filter"or "frost protection" programme. . . . . . . . . . . 26

O Home Connect . . . . . . . . . . . . . .28

Setting up . . . . . . . . . . . . . . . . . . . . . 28 Switching Wi-Fi on and off . . . . . . . . 30 Additional settings . . . . . . . . . . . . . . 30 Device info . . . . . . . . . . . . . . . . . . . . 31 Display . . . . . . . . . . . . . . . . . . . . . . . 31 Remote diagnostics . . . . . . . . . . . . . 31 About data protection. . . . . . . . . . . . 32 Declaration of Conformity. . . . . . . . . 32

D Daily care and cleaning . . . . . . .32

Cleaning agent . . . . . . . . . . . . . . . . . 32 Cleaning the appliance. . . . . . . . . . . 33 Cleaning the milk system . . . . . . . . . 33 Cleaning the brewing unit. . . . . . . . . 34

. Service programmes . . . . . . . . .35

Rinse milk system . . . . . . . . . . . . . . 36 Descaling . . . . . . . . . . . . . . . . . . . . . 36 Cleaning . . . . . . . . . . . . . . . . . . . . . . 36 calc’nClean. . . . . . . . . . . . . . . . . . . . 37

3 Trouble shooting . . . . . . . . . . . .38

4 Customer service . . . . . . . . . . . .41

Technical data . . . . . . . . . . . . . . . . . 41 E number and FD number . . . . . . . . 41 Guarantee . . . . . . . . . . . . . . . . . . . . 41

6

8 Intended use

Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.

This appliance is intended for domestic use only.

Only use the appliance indoors at room temperature and up to 2000 m above sea level.

Intended use en

(Important safety information

Please read carefully, follow and retain the operating instructions. When passing on the appliance, enclose these instructions.

This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Keep children under 8 years of age away from the appliance and connecting cable and do not allow them to use the appliance. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.

7

en Important safety information

:Warning

Danger of electric shock!

■The appliance may only be connected to a power supply with alternating current via a correctly installed socket with earthing. Ensure that the protective conductor system of the domestic electricity supply has been correctly installed.

■Connect and operate the appliance only in accordance with the specifications on the rating plate. If the power cord of this appliance is damaged, it must be replaced by customer service.

■Do not use if the power cable or appliance is damaged. If a fault occurs, pull the mains plug or switch off the mains voltage immediately.

■To prevent hazards, the appliance may be repaired by our customer service only.

■Never immerse the appliance or mains cord in water.

■The plug and socket connection of the appliance must not come into contact with liquids.

■Please note the special information on cleaning in the instructions.

:Warning

Risk of scalding (Home Connect)!

If an unattended remote start takes place, third parties might be scalded if they reach under the coffee dispenser during drinks dispensing. You should therefore make sure that with an unattended remote start there is no risk to other people, in particular not to children, or to property.

:Warning

Hazard due to magnetism!

The appliance contains permanent magnets which may affect electronic implants, e.g. heart pacemakers or insulin pumps. Persons wearing electronic implants must maintain a minimum distance of 10 cm from the appliance and from the following parts upon removal: milk container, milk system, water tank and brewing unit.

:Warning

Risk of suffocation!

Do not let children play with packaging material. Store small parts safely as they can be easily swallowed.

8

:Warning Risk of burns!

■The milk system becomes very hot. After use, allow it to cool down first before touching it.

■After use, surfaces such as the cup warmer may still be hot for a certain period.

■Freshly prepared beverages are very hot.Leave to cool a little if necessary.

:Warning Risk of injury!

■Improper use of this appliance may result in injury.

■Do not reach into the grinding unit.

Environmental protection en

7Environmental protection

Saving energy

■If the appliance is not being used, switch it off.

■Set the interval for automatic switch-off to the smallest value.

■If possible, do not interrupt coffee or milk froth dispensing. Stopping a process prematurely results in higher energy consumption and the drip tray fills up more quickly.

■Descale the appliance regularly to avoid a build-up of limescale. Limescale residue results in higher energy consumption.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Please ask your dealer about current disposal routes.

9

en Getting to know your appliance

*Getting to know your appliance

This section provides an overview of the scope of delivery, the assembly and the components of your appliance. It also introduces you to the different controls.

Note: Depending on the appliance model, individual details and colours may differ.

The operating instructions refer to two product variants:

■Appliance with one bean container

■Appliance with two bean containers

How to use these instructions:

The cover pages of the operating instructions can be folded out towards the front. The illustrations are identified using numbers that are referred to in the operating instructions.

Example: ~ Fig. !

Included in delivery

~ Fig. !

# Fully automatic coffee machine

+Milk container (container, lid, riser, connection hose)

3 Operating instructions ;** Water filter

CMeasuring spoon

KWater hardness testing strip

The item marked with ** is only supplied with certain appliances.

Assembly and components

~ Fig. "

( Display

0 Control panel

8Rotary selector/startstop (rotate and press to navigate)

@Outlet system (coffee, milk, hot water), height adjustable

HMilk container (container, lid, riser, connection hose)

PDrip tray (coffee grounds container, drip plate)

X Brewing chamber cover ` Water tank

h Rating plate

)" Recessed grip on water tank )* Cup warmer

)2 Cup warmer LED display ): Grind compartment (ground

coffee/cleaning tablet) )B Bean container

)J Rotary selector for grinding level setting

)R Aroma lid )Z* Aroma lid )b* Bean container

)j* Rotary selector for grinding level setting

1"* Bean container selector buttons, illuminated

Depending on the model:

Items marked with * are only present in the appliance with two bean containers.

10

Getting to know your appliance en

Controls

Button	Meaning
on/off	Switches the appliance on and off
	The appliance rinses automatically when it is switched on and off.

The appliance is not rinsed if:

■it is still warm when switched on, or

■coffee was not dispensed before the appliance was switched off.

The appliance is ready for use when the symbols for drink selection and the on/off button light up on the display.

!Customising

The appliance provides the option of saving and calling up customised settings for coffee drinks. ~ "Customising" on page 22

"Coffee strength

Adjusting the coffee strength. ~ "Adjusting beverage settings" on page 19

milk	Briefly press:
	Setting for share of milk in the drink in %
	As a drink or as an ingredient in certain coffee drinks. ~ "Adjusting beverage settings"
	on page 19
	Press and hold for at least 4 seconds:
	Child-proof lock ~ "Childproof lock" on page 24
ml	Drink quantity in millilitres. ~ "Adjusting beverage settings" on page 19

#Two drinks

Preparation of two drinks simultaneously. Position cups next to one another under the coffee dispenser. ~ "Adjusting beverage settings" on page 19

$/±	Menu settings/service programmes
	Press $/± button briefly to call up menu settings, Home Connect settings, cup warmer,
	service programmes, water filter and frost protection. Briefly press $/± button again to
	return to the drink selection. If no selection is made within approx. 10 seconds, the appli-
	ance will automatically return to the drink selection.
	Navigation buttons
	For navigating in the display.
	In "barista mode" additional functions are assigned to the navigation buttons. In this set-
	ting, further adjustments can be made to the drink, for example. ~ "Adjusting beverage
	settings" on page 19

11

en Accessories

Display

The display ( shows the selected drinks, settings and setting options, as well as messages about the appliance’s operating status.

Additional information is shown in the display; this is hidden after a short period of time or once the information is confirmed by pressing a button.

The display also prompts the user to perform certain actions.

The individual steps for performing the action are shown in the display.

If the action required was carried out, e.g. "Fill water tank", the corresponding message will disappear.

Rotary selector

The rotary selector 8 has a range of different functions.

■Rotation: navigate in the display and change settings.

■Pressing: start beverage preparation or service programme, confirm menu selection.

■Pressing while drink is being dispensed: prematurely stop dispensing.

_ Accessories

The following accessories are available from retailers or from customer service:

Accessory	Order number
	Retail		Customer ser-
			vice
Cleaning tablets	TZ80001N
Descaling tablets	TZ80002N
Water filter	TZ70003		00575491
Care set	TZ80004		00576330
Adapter for milk car-	TZ90008		00577862
ton

The contact data for customer service in all countries can be found at the back of these instructions.

12

K Before using for the first time

In this section, you will learn how to commission your appliance. Before you can use your new appliance, you must make some settings.

Note: Only use the appliance in frost-free areas. If the appliance was transported or stored at temperatures below 0 °C, you must wait for at least 3 hours before using it.

Installing and connecting the appliance

1.Remove any protective plastic film.

2.Place the appliance on a level, water-resistant surface which can bear the weight.

3.Using the mains plug, connect the appliance to an earthed socket that has been correctly installed.

Commissioning the appliance

Selecting language

Notes

■The language selection appears automatically when the appliance is switched on for the first time.

■You can change the language at any time. ~ "Menu settings"

on page 24

1.Switch on the appliance with the on/off button.

The preset language appears in the display.

2.Use the rotary selector to select the desired display language.

3.Confirm with the right navigation

button.

The setting has been saved.

Before using for the first time en

Selecting water hardness

It is important to set the water hardness correctly so that the appliance indicates in good time when the descaling programme should be run. The preset water hardness is level 4.

You can check the water hardness using the enclosed test strip or by asking your local water supplier.

If a water softening system is installed in the house, please select "Softening device".

The table shows the allocation of the levels to the different degrees of water hardness:

Level	Water hardness
	German (°dH)	French (°fH)
1	1-7	1-13
2	8-14	14-25
3	15-21	26-38
4	22-30	39-54

Subsequent changes to the water hardness can be made at any time.

~ "Menu settings" on page 24

1.Briefly immerse the enclosed test strip in fresh tap water, leave it to drip and read off the result after one minute.

2.Use the rotary selector to set the water hardness determined.

3.Confirm with the right-hand navigation button.

The setting has been saved.

Do you want to connect to Home Connect?

■To now connect the appliance to the WLAN network (home network), confirm "yes" with the right-hand navigation button.

■To connect the appliance to the WLAN network later, select "no" with the left-hand navigation button.

13

en Before using for the first time

Note: When selecting "yes", please read the detailed description in the section "Home Connect".

Do you want to insert a water filter?

■If you want to insert a water filter now, confirm "yes" with the right-hand navigation button.

■To insert a water filter later, select "no" with the left-hand navigation button.

Note: If selecting "yes", please read the detailed description in the section "Starting the "Water filter" or "Frost protection" programme" from the item "Inserting or replacing a water filter".

The reminder "Fill bean container" lights up briefly.

Either confirm with the right-hand navigation button or wait a few seconds.

The reminder "Please fill water tank" lights up. Fill the water tank.

Filling the bean container

This appliance can be used to prepare coffee drinks from coffee beans or ground coffee (not instant coffee).

1.Open the lid )R of the bean container )B.

2.Add beans.

3.Close the lid again.

Notes

■Coffee beans that have been glazed or caramelised or treated with other sugary additives will block the brewing unit. Only use pure bean mixes that are suitable for use in fully automatic coffee or espresso machines.

■Never use unroasted coffee beans.

■The coffee beans are freshly ground for each brewing operation.

■Store coffee beans in a sealed container in a cool place to ensure optimum quality.

■Coffee beans can be kept in the bean container for a number of days without losing their aroma.Only ever add the ground coffee shortly before beverage preparation. ~ "Preparing coffee using ground coffee"

on page 17

In models with two bean containers )B , )b* you can pour in two different types of coffee beans. Select the desired bean container using the selection button 1"*. The LED of the active bean container lights up.

The appliance memorises the most recently used bean container for each drink. This presetting can be modified.

~ "Menu settings" on page 24

14

Filling the water tank

Important: Fill the water tank with fresh, cold, still water on a daily basis. Prior to operation, check whether the water tank has been sufficiently filled.

1.Hold the recessed grip )" on the side of the water tank ` and gently tilt out the water tank to the side.

2.Use the handle to remove the water tank and then rinse out.

3.Fill the water tank with water up to the "max" marking.

4.Re-insert the water tank in the holder

and tilt back to the starting position. The brand logo lights up on the display. The appliance heats up and rinses.

Some water will run out of the outlet system.

The appliance is ready for use when the symbols for the beverages and the on/off button light up on the display.

Notes

■When the appliance is used for the first time, after running a service programme or if it has not been operated for a long period, the first beverage will not have the full aroma and should not be consumed.

■After starting up the appliance for the first time, you will consistently achieve a suitably thick and stable "crema" only after the first few cups have been dispensed.

■If the appliance is in use for a long period of time, water droplets will form on the ventilation slots. This is normal.

Operating the appliance en

1 Operating the

appliance

In this section, you will learn how to prepare your appliance for beverage preparation and how to prepare hot drinks. It features information on adjusting the beverage settings and adjusting the grinding level.

Selecting a drink

■Use the rotary selector to select the desired beverage.

■The display shows the name of the drink and the values currently selected (e.g. strength or cup size).

■The drink selected can be prepared with the pre-set values or first adjusted to your individual taste.

~ "Adjusting beverage settings" on page 19 ~ "Menu settings" on page 24

■If no controls are activated within approx. 5 seconds, the appliance will exit settings mode. The settings made will be automatically stored.

You can choose from the following drinks:

Ristretto

Espresso Doppio

Espresso

15

en Operating the appliance

Espresso Macchiato

Coffee

Coffee XL

Cappuccino

Latte Macchiato

Caffe Latte

Flat White

Café cortado

Americano

Milk froth

Warm milk

Hot water

Pot function

(not available in all product variants)

coffeeWorld

If the appliance is connected to Home Connect, additional drinks can be selected from "coffeeWorld" and adjusted in the app.The last "coffeeWorld" drink selected in the app is shown in the display and can also be adjusted and dispensed directly at the appliance.

Note: With some settings the coffee is prepared in two steps, or Coffee XL in three (aroma setting).Wait until the process is fully completed.

Tip: Cups, particularly small, thick espresso cups, should be placed with their base on the cup warmer. ~ "Cup

warmer" on page 22

16

Preparing coffee using freshly ground beans

You can choose between Ristretto, Espresso Doppio, Espresso, Coffee, Coffee XL and Americano. The preparation of coffee drinks with milk is explained in a separate section.

~ "Preparing drinks with milk" on page 18

The appliance is switched on. The water tank and bean container have been filled.

1.Place a cup under the outlet system.

2.Use the rotary selector to select the

desired drink.

The name of the drink and the currently active values are shown on the display. 3. To change the settings for the

selected drink.

~ "Adjusting beverage settings" on page 19 ~ "Menu settings" on page 24

4.To begin dispensing the drink, press the rotary selector.

The coffee is brewed and then dispensed into the cup.

Note: To prematurely stop dispensing the drink, press the rotary selector again.

Tip: In models with two bean containers and if one is empty, it is possible to switch to the full bean tank during dispensing.Dispensing will then continue.

Preparing coffee using ground coffee

You can also operate this appliance using ground coffee. Do not use instant coffee. The preparation of coffee drinks with milk is explained in a separate section. ~ "Preparing drinks with milk"

on page 18

Operating the appliance en

The appliance is switched on. The water tank has been filled.

1.Place a cup under the outlet system.

2.Use the rotary selector to select the desired drink.

3.Press the " button.

4.Use the rotary selector to select "Ground coffee".

5.Press the " button.

6.Remove the aroma lid )R of the bean container )B and open the grounds compartment ):.

7.Add the ground coffee; do not press firmly. Add no more than two level measuring spoons.

Caution!

Do not place coffee beans or instant coffee in the grounds compartment.

8.Close the grounds compartment and

the aroma lid.

The name of the drink and the currently active values are shown on the display.

9.To change the settings for the selected drink.

~ "Adjusting beverage settings" on page 19 ~ "Menu settings"

on page 24

10. To begin dispensing the drink, press the rotary selector.

The coffee is brewed and then dispensed into the cup.

Notes

■Any grounds residue in the grounds shaft should be directed down the shaft using a soft brush.

■To prematurely stop dispensing the drink, press the rotary selector again.

■For another drink with ground coffee, repeat the procedure.

■When ground coffee is used, the aromaDoubleShot function is not available.

17

en Operating the appliance

Preparing drinks with milk

This appliance features an integrated milk system.The milk system can be used to prepare coffee drinks with milk, as well as milk froth and warm milk. You can choose between Espresso Macchiato, Cappuccino,

Latte Macchiato, Caffe Latte, Café cortado and Flat White.

Notes

■While milk is being prepared, you may hear a whistling sound. These noises are emitted for technical reasons and are normal.

■Dried milk residues are difficult to remove, therefore always perform cleaning. ~ "Cleaning the milk system" on page 33

:Warning

Risk of burns!

The milk system becomes very hot. After use, always let it cool down before you touch it.

Using the milk container

The milk container H has been designed especially for use together with this appliance. It is intended solely for use in the household and for storing milk in the refrigerator.

Important: The milk container can only be connected if the milk system is installed in the outlet system with an adapter and hose. (~ Fig. #)

1.To remove the lid, press the marking and remove the lid. (~ Fig. ')

2.Pour in the milk.

3.Press the lid onto the milk container until it engages.

4.Connect the milk container on the left of the appliance. The milk container must engage.

Tip: If the milk container runs empty during dispensing, it can be filled and connected again. Dispensing continues automatically.

Coffee drinks with milk

The appliance is switched on. The water tank and bean container have been filled.

The milk container filled with milk is connected.

1.Place a cup or a glass under the outlet system.

2.Use the rotary selector to select the

desired drink.

The name of the drink and the currently active values are shown on the display. 3. To change the settings for the

selected drink.

~ "Adjusting beverage settings" on page 19 ~ "Menu settings"

on page 24

4. To begin dispensing the drink, press the rotary selector.

The milk is dispensed into the cup or glass first. The coffee is then brewed and dispensed into the cup or glass. The sequence can be changed for Cappuccino and Espresso Macchiato.

~ "Menu settings" on page 24

Note: Pressing the rotary selector once can prematurely stop the dispensing of milk or coffee; pressing the rotary selector twice stops the drink dispensing completely.

Milk froth or warm milk

The appliance is switched on. The water tank has been filled.

The milk container filled with milk is connected.

1.Place a cup or a glass under the outlet system.

2.Select "Milk froth" or "Warm milk"

with the rotary selector.

The name of the drink and the currently active values are shown on the display.

3.To change the settings for the selected drink.

~ "Adjusting beverage settings" on page 19 ~ "Menu settings" on page 24

4.To begin dispensing the drink, press the rotary selector.

18

Operating the appliance en

Milk froth or warm milk is dispensed into the cup or glass.

Note: To prematurely stop dispensing the drink, press the rotary selector again.

Dispensing hot water

Note: Before dispensing hot water, clean the milk system and remove the milk container. If the milk system is not cleaned, the dispensed water may contain small quantities of milk.

~ "Cleaning the milk system" on page 33

:Warning

Risk of burns!

The outlet system becomes very hot. After use, always let the outlet system cool down before you touch it.

The appliance is switched on. The water tank has been filled.

1.Place a cup under the outlet system.

2.Remove the milk container, if connected.

3.Select "Hot water" with the rotary selector.

4.To change the settings for the selected drink.

~ "Adjusting beverage settings" on page 19 ~ "Menu settings"

on page 24

5. To begin dispensing the drink, press the rotary selector.

Hot water is dispensed into the cup.

Note: To prematurely stop dispensing the drink, press the rotary selector again.

Adjusting beverage settings

Once you have selected a drink, you can adjust certain values depending on the drink. To do so, please use the following buttons and the rotary selector:

Button	Function	Selection
"	Selecting coffee strength,	■	very mild *	■	doubleShot strong
	ground coffee	■	mild	■	doubleShot strong +
		■	mild +*	■	doubleShot strong ++*
		■	normal	■	TripleShot strong *
		■	normal +*	■	TripleShot strong +*
		■	strong	■	Ground coffee
		■	strong +*
		■	very strong
		■	very strong +*
		■	extra strong
	Milk/coffee mixing ratio	Setting share of milk in %
milk
		(only for coffee drinks with milk)
ml	Cup size	Adjustment of volume in ml increments.
		Not available for Ristretto.
#	Two cups at once	Place two cups under the outlet.
Navigation	Water Temperature*
		e.g. for tea drinks:		■ > 80°C (green tea)
button, left		■	> 60°C (special tea prepa-	■ > 85°C (rooibos tea)
			ration)	■ > 90°C (black tea)
		■	> 70°C (white tea)	■ > 97°C (fruit tea)
Navigation	aromaIntense*	■	normal	■	intense +
button, right		■	intense

Selection marked with * is only available for certain drinks or when in "barista mode".

19

en Operating the appliance

The appliance is set to "barista mode" by default. Additional values can therefore be set using the two navigation buttons. "Barista mode" can also be switched off. ~ "Menu

settings" on page 24

The factory settings are shown in orange on the display. The currently selected settings are backlit.

Adjusting the coffee strength or selecting ground coffee

A coffee drink is selected.

1.Press the " button.

2.Use the rotary selector to set the coffee strength or select ground coffee.

3.Press the " button or the rotary selector to confirm.

Aroma setting

The longer coffee is brewed, the more bitter substances and undesirable aromas are released. This has a negative effect on the taste and makes the coffee less easily digestible. The appliance therefore offers special aroma settings for extra strong coffee: doubleShot and TripleShot. Depending on the setting, once half or a third of the volume has been prepared, a second portion of coffee beans is ground and brewed, so that in each case only the pleasant and beneficial flavours and aromas are released.

Notes

■The doubleShot setting can be selected for all coffee drinks except for:

–drinks with a small volume of coffee, e.g. Ristretto

–coffee drinks with milk and a small volume of coffee

–a small volume of coffee, e.g. setting 200 ml "Caffe Latte" with a 90% share of milk (10% share of coffee)

–preparation with ground coffee

–dispensing two cups

■The aroma setting TripleShot can only be selected for Coffee XL.

–Dispensing two cups is not possible

Adjusting the milk/coffee mixing ratio

A coffee drink with milk is selected.

1.Press the milk button.

2.Use the rotary selector to set the share of milk in %.

Example: When a value of 30% is configured, 30% milk and 70% coffee will be dispensed.

3.Press the milk button or the rotary selector to confirm.

Selecting cup size

A drink is selected.

1.Press the ml button. The preset volume depends on the type of beverage.

2.Use the rotary selector to adjust the desired volume in ml increments.

3.Press the ml button or the rotary selector to confirm.

Notes

■The volume cannot be changed for ristretto.

■The volume dispensed can fluctuate depending on the quality of the milk.

20

Preparing two cups at once

A coffee drink or a coffee drink with milk is selected.

1.Press # button.

2.Place two pre-heated cups on the left and right below the outlet system.

3.To begin dispensing the drink, press

the rotary selector.

The selected drink will be brewed and then dispensed into the two cups.

Notes

■The drink is prepared in two steps (two grinding operations). Please wait until the process is fully completed.

■When selecting #, the aroma settings are not available.

■The setting # for Coffee XL is not available.

Adjusting the drink temperature

Only available in "barista mode".

~ "Menu settings" on page 24

A drink of your choice is selected.

1.Use the left navigation button to call up the temperature setting.

2.Turn the rotary selector to set the desired temperature.

3.Press the left navigation button or the rotary selector to confirm.

Setting aromaIntense

Only available in "barista mode".

~ "Menu settings" on page 24

The intensity of the taste of a coffee drink can be individually adjusted using the aromaIntense setting. When milk is dispensed, this selection does not influence the warm milk or the milk froth.

A coffee drink is selected.

Operating the appliance en

1.Use the right navigation button to call up the menu.

2.Make the desired setting using the rotary selector.

3.Press the right navigation button or the rotary selector to confirm.

Setting the grinding level

This appliance features an adjustable grinder. This enables the grinding level of the coffee to be individually changed.

:Warning

Risk of injury!

Do not reach into the grinding unit.

Caution!

The appliance may be damaged! Only adjust the grinding level when the grinder is running!

When the grinder is in operation, use the rotary selector )J, )j* to set the grinding level.

■Finer grinding level: turn anticlockwise. (Fig. a)

■Coarser grinding level: turn clockwise. (Fig. b)

Notes

■The new setting will not become apparent until the second cup of coffee.

■For dark roast coffee beans, choose a finer grinding level; for lighter beans, choose a coarser grinding level.

21

en Customising

Cup warmer

Caution!

The cup warmer becomes very hot!

The fully automatic coffee machine features a cup warmer )*. If the cup warmer is switched on, the cup warmer LED display )2 lights up.

Tip: For optimal cup heating, position the cups with the base of the cup on the cup warmer.

Note: This function can be activated and deactivated in the menu (press $/± and turn the rotary selector to the left) or in the "Settings menu". ~ "Menu

settings" on page 24

P Customising

User profiles can be created in the customising menu. In the user profiles, individual beverages can be stored under names of your choice.

Creating a user profile

1.Press ! button. The menu appears.

2.Use the rotary selector to select a new profile.

3.Press the right-hand navigation button to confirm the selection. The user name can be entered.

4.Use the rotary selector to select the

desired letter. Press the rotary selector to save the letter. The letter is saved.

Once the user name has been entered in full:

5.Press the right-hand navigation button to save the user name.

6.Use the rotary selector to select a background picture.

7.Press the right-hand navigation button to save the selection.

8.Use the rotary selector to select a silhouette.

9.Press the right-hand navigation button to save the selection.

10.Use the rotary selector to select "default mode" or "barista mode".

11.Press the right-hand navigation button to save the selection. The selection prompt appears.

12.Press the right-hand navigation button again to confirm the profile. The user profile picture appears.

13.Press ! button to exit the menu or to save an individual beverage for the user created immediately afterwards.

22

Saving individual beverages:

1.Press the rotary selector. The display shows "change beverages".

2.Press the right-hand navigation button to create the beverage.

3.Use the rotary selector to select the desired beverage.

The selected beverage can be adjusted in line with personal preference.

~ "Adjusting beverage settings" on page 19

4.Press the rotary selector.

A prompt appears for you to confirm the selection.

5.Press the right-hand navigation button to confirm the selection.

6.Press ! button.

The settings are completed.

7.Press ! button to exit the menu. The appliance is ready for use again.

Note: The appliance can store up to 10 profiles each with 10 drinks.

Editing or deleting user profile

1.Press the ! button. The menu appears.

2.Use the rotary selector to select the desired profile.

3.Press the left navigation button to

delete the profile. - or -

Press the right navigation button to edit the settings in the profile.

The settings in the profile can be changed as described. ~ "Creating a

user profile" on page 22

4. Press the ! button.

The appliance is ready for use again.

Customising en

Saving individual drinks

A drink that is currently being dispensed can be saved directly in a new or an existing profile using the individual settings.

1.Press and hold ! button for at least 5 seconds.

If profiles have not yet been saved, a new profile appears immediately.

2.If profiles are already saved and the individual drink is to be saved in a

new profile, use the rotary selector to select a new profile.

- or -

If the individual drink is to be saved in an existing profile, use the rotary selector to select the desired profile.

3.Press the right-hand navigation button to save. If a new profile is being created, enter the name and select the background picture, silhouette and usermode. Save the entries. Info: If a profile is already available, select it and save the drink.

4.Press ! button.

The settings are completed. The appliance is ready for use again.

5. Press ! button to exit the menu.

Note: To exit the menu automatically, select "Leave profiles automatically" under "User profiles". ~ "Menu

settings" on page 24

23

en Childproof lock

A Childproof lock

The appliance can be locked to protect children against scalding and burns.

Activating the child-proof lock

Press and hold the milk button for at least 4 seconds.

"Child-proof lock activated" appears in the display.

It is no longer possible to operate the appliance.

Deactivating the child-proof lock

Press and hold the milk button for at least 4 seconds.

"Child-proof lock deactivated" appears in the display.

The appliance can be used in the usual way.

Q Menu settings

This menu is used for changing settings individually, accessing information and starting a programme.

Changing settings

1.Press $/± button, turn the rotary selector to the left and select "Settings". Press the rotary selector. The different setting options will appear in the display.

2.Select the desired setting using the rotary selector.

The current setting is highlighted in colour on the display.

3.Press the navigation button under "select".

4.Use the rotary selector to change the setting.

5.Press the navigation button under "confirm".

The setting has been saved.

6.Press $/± button to exit "Menu". The drink selection appears on the display.

Notes

■You can switch to the previous level by pressing the navigation button under "back".

■The setting procedure can be aborted by pressing the navigation button under "abort".

■Press $/± button to exit the menu at any time.

■If no entry is made within approx. 2 minutes, the menu closes automatically and the settings are not saved.

24

					Menu settings en
	The following settings are available:
	Settings		Possible settings		Explanation
	Language		Different languages		Setting the language to be used for display texts.
	Water hardness		■	1 (soft)	Setting in line with the hardness of the local
			■	2 (medium)	water supply.
			■	3 (hard)	The preset water hardness is level 4 (very hard).
			■	4 (very hard)	The water hardness can, for example, be
			■	Softening device	requested from your local water supplier.
					It is important to set the water hardness cor-
					rectly, so that the appliance indicates accurately
					when the descaling programme should be run.
					If a water softening system is installed in the
					house, please select the "Softening device" set-
					ting.
	Home Connect*		Settings for connection to WLAN network (home network) and mobile devices
			(see section "Home Connect").
	Switch off after		5 minutes		Setting that determines how long the appliance
			up to to		should wait after the last beverage preparation
			3 hours		before it automatically switches itself off.
					The factory setting is 30 minutes.
	Brightness display		Level 1 up to level 10		Setting that governs the brightness of the dis-
			Standard setting 7		play
	Select usermode		■	default mode	In the "barista mode" setting, the following can
			■	barista mode	be performed directly in the display:
					■ The temperature can be set by pressing the
					left navigation button.
					■ The aromaIntense (brew speed) can be set
					in three levels by pressing the right naviga-
					tion button.
	Beverage info		Shows the volume of drinks dispensed since the appliance was commissioned.
			For technical reasons, the counter does not represent a precise number of cups.
	Factory settings		Appliance reset to factory set-		Resets all your own settings to the condition
			tings		when delivered.
	Demo mode		■	on	For presentation purposes only. The setting "off"
			■	off	must be activated for normal operation. The set-
					ting is only possible in the first 3 minutes after
					switching on the appliance.
	Beverage settings
		Cappuccino	■	first milk	Setting that determines whether milk or coffee
		sequence	■	first coffee	should be brewed and dispensed first.
		Espresso Mac-	■	first milk	Setting that determines whether milk or coffee
		chiato sequence	■	first coffee	should be brewed and dispensed first.
		Latte Macchiato	■	min	Setting the pause between milk and coffee dis-
		pause	■	5s	pensing.
			■	10s

25

en Menu settings
Espresso / Cof-	■	normal		Setting the temperature for coffee drinks.
fee temperature*	■	high		The setting is effective for all preparation types.
	■	max.		Applies only to "default mode" -in "barista mode"
				directly adjustable via drink selection.
				~ "Adjusting beverage settings" on page 19
User profiles	■	Leave profiles automati-		Setting that determines whether user profiles
		cally		are to be exited automatically or deletion of all
	■	Delete all profiles		user profiles.
Cup warmer*	■	on		If the cup warmer is switched on, the cup
	■	off		warmer LED lights up.
Bean container	Setting that determines which bean container is automatically active.
	The bean container can be selected directly before each dispensing operation
	using the "Bean container" selection buttons.
	■	most recently selected		The appliance remembers the most recently
		bean container		used bean container.
	■	default bean container		Each time a beverage is dispensed, the appli-
		right		ance automatically returns to the right-hand
				bean container.
	■ default bean container left			Each time a beverage is dispensed, the appli-
				ance automatically returns to the left-hand bean
				container.
	■ Save container with bever-			The appliance remembers the most recently
		age		used bean container and the most recently set
				beverage.

Settings marked with * can also be selected directly in the menu.

Starting the "Water filter"or "frost protection" programme

1.Briefly press the $/± button.

2.The rotary selector can be used to select the "Water filter" or "frost protection" programme. The current setting is marked on the display.

Note: The rotary selector can also be used to select a service programme.

~ "Service programmes" on page 35

Water filter

A water filter lessens limescale deposits and reduces impurities in the water. The appliance also does not need to be descaled so often. Water filters are available from retailers or from customer service. ~ "Accessories"

on page 12

If a water filter is inserted, the appliance will show when it needs to be changed. The display shows the relevant prompt.

26

Inserting or replacing a water filter

A new water filter must be rinsed before it can be used.

1.Select "Water filter" in the Settings menu.

2.Use the navigation button to select "insert" or "replace".

3.Use the measuring spoon to press the water filter firmly into the empty water tank.

4.Fill the water tank with water up to the "max" marking.

5.Place a container with a capacity of at least 1.0 l under the outlet and confirm.

Water will now flow through the filter. The filter is rinsed.

6.Then empty the container.

The appliance is ready for use again.

Notes

■Rinsing the filter automatically activates the interval for display of the filter change.After this interval or after 2 months at the latest the filter will no longer be effective. It needs to be replaced for reasons of hygiene and to prevent a build-up of limescale (which could damage the appliance).

■If the appliance has not been used for a prolonged period (for example, while you are on holiday), the inserted filter should be rinsed before the first time the appliance is used again. To do this, simply dispense a cup of hot water.

Menu settings en

Removing the water filter

If a new water filter is not inserted, the "Water filter" function must be deactivated.

1.Select "Water filter" in the Settings menu.

2.Select and confirm the setting "remove".

3.Remove the water filter from the water tank.

4.Re-insert the water tank.

The appliance is ready for use again.

Frost protection

A service programme to prevent frost damage during transportation and storage. This programme completely empties the appliance. The appliance must be ready for use.

1.Press the rotary selector to start the programme.

2.Empty the water tank and re-insert it.

3.The appliance emits steam.

4.Empty the drip tray and thoroughly

clean the appliance.

The appliance can now be transported or stored.

27

en Home Connect

O Home Connect

This fully automatic coffee machine is Wi-Fi-capable and can be remotely controlled using a mobile device (e.g. tablet, smartphone).

The Home Connect app offers extra functions that complement the networked appliance perfectly. If the appliance is not connected to the WLAN network (home network), it functions in the same way as a fully automatic coffee machine with no network connection and can be operated as usual via the display.

Important:

The home network router must be operated in the 2.4 GHz frequency range (band: 100 mW max.). Please check and adjust it if necessary.

The availability of the Home Connect function depends on the availability of Home Connect services in your country. Home Connect services are not available in every country.You can find more information on this at www.home-connect.com.

Note: Please ensure that you follow the safety instructions given at the beginning of this instruction manual and that they are also observed when operating the appliance via the Home Connect app and when away from home. Please also follow the instructions in the Home Connect app. Operation on the appliance itself always takes priority, and during this time it is not possible to operate the appliance using the Home Connect app.

Setting up

To implement settings via Home Connect, you must have installed the Home Connect app on a mobile device (e.g. tablet PC, smartphone).

When doing so, observe the Home Connect installation instructions supplied, which are also available to download in additional languages at http://www.siemens-home.com.

Follow the steps specified by the app to implement the settings.Login of the appliance in the WLAN network can be carried out on initial set-up of the fully automatic coffee machine either directly or using the menu (press $/± button to open "Menu"):

1.Turn the rotary selector to the left and select "Home Connect setting".

2.Press the rotary selector.

3.The display shows the Home Connect menu, with "Turn on Wi-Fi" highlighted in colour.

4.Press the right-hand navigation button under "select" to start the radio link.

5.Use the rotary selector to select "Connect to network".

6.Press the right-hand navigation button under "select".

7.The following selection appears: "Connect automatically" and "Connect manually".

Note: If the router has WPS functionality, please select "Connect automatically", otherwise use "Connect manually".

28

Automatic registration in the home network

1.Use the rotary selector to select "Connect automatically" on the display.

2.Press the right-hand navigation button under "confirm".

3.The display shows "Automatic network connection".

4.Press the WPS button on the home network router within a few minutes and wait until the display of the fully automatic coffee machine shows "Network connection successful".

5.Open the app on the mobile device.

6.Use the rotary selector to select "Connect to app".

7.Press the right-hand navigation button under "select". The fully automatic coffee machine connects to the app. Follow the instructions on the app.

8.Wait until "Successfully connected to app" lights up briefly in the display.

9.Use the rotary selector to select "Turn on remote start".

10.Press the right-hand navigation button under "select". A warning message appears.

11.Press the right-hand navigation button under "continue" and read the warning message.

12.Press the right-hand navigation button under "confirm".

13.Press the $/± button to close the menu. With the mobile device the functions of the fully automatic coffee machine can now be used to their full extent via the app.

Note: If "Turn off remote start" is selected, only the modes of the fully automatic coffee machine are displayed in the Home Connect app. You can specify settings but not start drinks dispensing.

Home Connect en

Manual registration in the home network

1.Use the rotary selector to select "Connect manually" on the display.

2.Press the right-hand navigation button under "confirm". The fully automatic coffee machine sets up a separate WLAN network which can be accessed with a tablet or smartphone. The display shows the SSID (the name) and the key (the password) of this network.

3.Log the mobile device in to the network of the fully automatic coffee machine with the "HomeConnect" SSID and the "HomeConnect" key.

4.Start the app on the mobile device and follow the instructions for network login in the app and the Home Connect documents supplied. The login process is complete when "Network connection successful" lights up briefly in the display of the fully automatic coffee machine.

5.Use the rotary selector to select "Connect to app" on the display.

6.Press the right-hand navigation button under "select". The fully automatic coffee machine connects to the app.

7.Wait until "Successfully connected to app" lights up briefly in the display.

8.Use the rotary selector to select "Turn on remote start".

9.Press the right-hand navigation button under "select". A warning message appears.

10.Press the right-hand navigation button under "continue" and read the warning message.

11.Press the right-hand navigation button under "confirm".

12.Press the $/± button to close the menu. With the mobile device the functions of the fully automatic coffee machine can now be used to their full extent via the app.

29

en Home Connect

Note: If "Turn off remote start" is selected, only the modes of the fully automatic coffee machine are displayed in the Home Connect app. You can specify settings but not start drinks dispensing.

Switching Wi-Fi on and off

Wi-Fi can be switched "on" or "off" as required (e.g. when on holiday).

Note: Network information is retained after the appliance is switched off.After switching on, wait a few seconds until the fully automatic coffee machine has connected to the WLAN network again. In networked standby mode, the appliance requires max. 3 W.

1.Press $/± button to open "Menu".

2.Turn the rotary selector to the left and select "Home Connect setting".

3.Press the rotary selector.

4.Use the rotary selector to select "Turn on Wi-Fi" or "Turn off Wi-Fi".

5.Press the right-hand navigation button under "select" to switch the radio module "on" or "off".

6.Press $/± button to close the menu.

Additional settings

Home Connect can be adapted to your individual needs at any time. Note: The fully automatic coffee machine must be connected to the WLAN network.

Disconnecting

The fully automatic coffee machine can be disconnected from the WLAN network at any time.

Note: If the fully automatic coffee machine is disconnected from the WLAN network, it cannot be operated using Home Connect.

1.Press $/± button, turn the rotary selector to the left and select "Home Connect setting".

2.Press the rotary selector.

3.Press the right-hand navigation button under "select".

4.Use the rotary selector to select "Disconn. from network".

5.Press the right-hand navigation button under "select". The appliance is disconnected from the network and app.

6.Press $/± button to close the menu.

Note: Information about the WLAN network is cleared.

Connect to the app

The Home Connect app can be installed on any number of mobile devices, which can then be used to connect to the fully automatic coffee machine. The fully automatic coffee machine must already be connected to the WLAN network.

1.Open the app on the mobile device.

2.Press $/± button, turn the rotary selector to the left and select "Home Connect setting".

3.Press the rotary selector.

4.Press the right-hand navigation button under "select".

5.Use the rotary selector to select "Connect to app".

6.Press the right-hand navigation button under "select" to connect the appliance to the app.

7.Press $/± button to close the menu.

Remote Start

If you wish e.g. to start drinks dispensing on the fully automatic coffee machine via a mobile device, Remote start must be activated.

30