Siemens TCM2, TCM3 Installation Instructions Manual

Siemens Energy & Automation, Inc.
Bellefontaine, Ohio 43311 U.S.A.

Installation Instructions

Item: Cat. No. TCM2, TCM3 Plug-In Adapters
For use with: SIEMENS

®

MD, MM & MF Frame Cir­cuit Breakers T ypes: MD6, MM6, MMK, MFC, MFF ,
HMD6, CMD6, SMD6,SHMD6, SCMD6, MD6ETI,
CMD6ETI, and Molded Case Switch T ype MXD6 in
conjunction with plug-in-mounting assemblies Cat.
No.’s PC5662, PC5663 and PM5663.

Page 1 of 2
Pc. No. 410904A01

Remove Pressure Wire Connectors From
Breaker If Present

Hazardous voltage.
Will cause death or
serious injury.

Turn OFF and lock out all
power supplying this
device before installing
or servicing accessory.

SAFETY INSTRUCTIONS

NOTE: This instruction outlines the recommended
installation procedure.

1. Circuit Breaker Preparation

The circuit breaker should be in the OFF/”O”
position before installing the plug-in-tulip adapter
kit. Turn of f and lock out all power supplying this

NO

device before installing. Verify that

voltage

is present before proceeding with task.

Dimensions

Inches

[Millimeters]

2. Loosen four breaker terminal shields screws (6)
and remove both line and load side terminal
shields (7).

3. Place tulip clip assembly (8) on back of breaker

in recess provided in base molding. Secure in
place with 5/16-18 hex head bolts (1 1) furnished.
Tighten these bolts to 72 In.-Lbs. (6 Ft.-Lbs.)
[8.13 N/m] to assure a good electrical connec­tion. Repeat this procedure for the remaining
tulip clip assemblies.

4. INSERT END SHIELDS (12) INTO SLOTS PRO-

VIDED AT LINE AND LOAD END OF
BREAKER.

5. Affix label (13) to front of circuit breaker as shown

in Fig. 4.

.25

[6.35]

Fig. 4

Siemens Energy & Automation, Inc.
Bellefontaine, OH 43311 U.S.A.

Page 2 of 2

Pc. No. 410904A01

© Siemens Energy & Automation, Inc.

Installation Instructions

4 x 12

8 x 9

8 x 10

TCM2

4 x 8

Hazardous voltage.
Will cause death or
serious injury.

Turn OFF and lock out all
power supplying this
device before installing or
servicing accessory.

8 x 11

5/16 - 18

2 x 6

4 x 7

[8.13 N/m]
72 In. Lbs.

1 x 13

TCM3

6 x 12

6 x 8

12 x 9

12 x 10

12 x 11

4 x 7

1 x 13

2 x 6