Siemens SIMATIC S7-300, S7-300 Module data User Manual
S7-300 Module data
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
_
__________________
_
__________
_
_________________
_
_
_________________
_
SIMATIC
S7-300
S7-300 Module data
Manual
This description is part of the S7-300
documentation package with the order number:
6ES7398-8FA10-8AB0
02/2013
A5E00105505-08
Preface
General technical data
1
Power supply modules
2
Digital modules
3
Principles of analog value
processing
4
Principles of analog modules
5
Analog modules
6
Other signal modules
7
Interface modules
8
Parameter sets of signal
modules
A
Diagnostics data of signal
modules
B
Dimensional drawings
C
Spare parts and accessories
for S7-300 modules
D
Directive on handling
Electrostatic-Sensitive
Devices (ESD)
E
Service & support
F
List of abbreviations
G
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E00105505-08
Ⓟ 02/2013 Technical data subject to change
Copyright © Siemens AG 2013.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
S7-300 Module data
Manual, 02/2013, A5E00105505-08
3
Preface
Purpose of the manual
The information contained in this manual can be used as a reference to operating, to
functions, and to the technical data of the signal modules, power supply modules and
interface modules of the S7-300.
Refer to the relevant S7-300 or ET 200M manuals to find out how to assemble and wire the
modules.for system installation.
Basic knowledge required
This manual presumes general knowledge in the field of automation engineering.
Range of validity of this manual
The manual describes the components based on the data valid at the time of its release.
SIEMENS reserves the right to include product information for each new module of a later
version.
Changes compared to the previous version
Changes / enhancements compared to the previous version described in this manual:
● New digital input module SM 321 DI 16 x DC 24V/125V
6ES7321-7EH00-0AB0
● Errors in the previous version of this manual have been corrected in the present version.
Preface
S7-300 Module data
4 Manual, 02/2013, A5E00105505-08
Position in the overall documentation structure
The following documentation forms part of the S7-300 documentation package. You can also
find this, along with the associated entry ID, on the Internet
(http://support.automation.siemens.
com
/WW/view/en/10805159/133300).
Name of the manual Description
Manual
CPU 31xC and CPU 31x, technical data
Entry ID: 12996906
Control and display elements, communication,
memory concept, cycle and reaction times,
technical data
Operating Instructions
S7-300, CPU 31xC and CPU 31x: Installation
Entry ID: 13008499
Project design, installation, wiring, addressing,
commissioning, maintenance and test functions,
diagnostics and troubleshooting.
System Manual
PROFINET system description
Entry ID: 19292127
Basic description of PROFINET:
Network components, data exchange and
communication, PROFINET IO, Componentbased Automation, application example of
PROFINET IO and Component-based
Automation.
Programming Manual
Migration from PROFIBUS DP to PROFINET IO
Entry ID: 19289930
Guideline for migration from PROFIBUS DP to
PROFINET IO.
Manual
• CPU 31xC: Technological functions
Entry ID: 12429336
• CD containing examples
Description of the technological functions:
positioning, counting, point-to-point coupling, loop
control.
The CD contains examples of the technological
functions.
YOU ARE CURRENTLY READING the Manual
S7-300 Automation System: Module Data
Entry ID: 8859629
Description of the functions and technical data of
signal/ power supply/ interface modules.
Instructions List
• CPU 31xC, CPU 31x,
IM151-7 CPU, IM154-8 CPU, BM 147-1 CPU,
BM 147-2 CPU
Entry ID: 13206730
• CPU 312, CPU 314, CPU 315-2 DP
CPU 315-2 PN/DP, CPU 317-2 PN/DP,
CPU 319-3 PN/DP as of V3.0
Entry ID: 31977679
List of the CPU's instruction set and
corresponding execution times. List of executable
blocks (OBs, SFCs, SFBs) and their execution
times.
Getting Started
Available anthology of Getting Started manuals:
• S7-300 Getting Started
Entry ID: 15390497
• PROFINET Getting Started Collection
Entry ID: 19290251
Using concrete examples, the Getting Started
documentation provides step-by-step instructions
focused on commissioning a fully functional
application.
Preface
S7-300 Module data
Manual, 02/2013, A5E00105505-08
5
Other manuals on S7-300 and ET 200M
Name of the manual Description
Reference Manual
• CPU Data: CPU 312 IFM - 318-2 DP
• Entry ID: 8860591
Control and display elements, communication,
memory concept, cycle and reaction times,
technical data
Software Installation Manual
S7-300 Automation System: Installation:
CPU 312 IFM – 318-2 DP
Entry ID: 15390415
Project design, installation, wiring, addressing,
commissioning, maintenance and test functions,
diagnostics and troubleshooting.
Configuration Manual
ET 200M signal modules for process automation
Entry ID: 7215812
Description of integration in process automation,
parameter configuration using SIMATIC PDM,
digital input modules, digital output modules.
Manual
Distributed I/O Device ET 200M
HART analog modules
Entry ID: 22063748
Description of configuration and commissioning
of HART analog modules.
Manual
Distributed I/O Device ET 200M
Entry ID: 1142798
Description of configuration, assembly and wiring.
Manual
SM 335 - High-speed analog mixed module for
SIMATIC S7-300
Entry ID: 1398483
Description of how to use the SM 335 module in
a SIMATIC S7-300.
Overview of operations, descriptions of functions,
and technical data relating to the SM 335.
Sign posts
The manual contains various features supporting quick access to specific information:
● At the beginning of the manual, you will find a complete table of contents.
● Key terms are explained in the glossary.
● You can use the index to find the key parts of the manual.
Approvals
See section Standards and approvals (Page 15).
CE approval
See section Standards and approvals (Page 15).
Mark for Australia (C-Tick-Mark)
See section Standards and approvals (Page 15).
Preface
S7-300 Module data
6 Manual, 02/2013, A5E00105505-08
Standards
See section Standards and approvals (Page 15).
Recycling and disposal
Since the S7-300 components only contain low levels of harmful substances, they are
suitable for recycling. For ecologically compatible recycling and disposal of your old device,
contact a certificated disposal service for electronic scrap.
Note on IT security
Siemens offers IT security mechanisms for its automation and drive product portfolio in order
to support the safe operation of the plant/machine. We recommend that you inform yourself
regularly on the IT security developments regarding your products. You can find information
on this on the Internet (http://support.automation.siemens.com
).
You can register for a product-specific newsletter here.
For the safe operation of a plant/machine, however, it is also necessary to integrate the
automation components into an overall IT security concept for the entire plant/machine,
which corresponds to the state-of-the-art IT technology. You can find information on this on
the Internet (http://www.siemens.com/industrialsecurity
).
Products used from other manufacturers should also be taken into account here.
Loading...