Siemens HZ1070 Instructions Manual

Telescopic Rack

Installation and Use Manual
Manuel d’installation et d’utilisation
Manual de instalación y uso

Models:
HZ1070

Telescopic Rack

This rack allows for easier access when inserting or removing food. Do not clean in
the self-clean oven.

Inserting Telescopic Rack into Oven:

CAUTION:

To avoid burns, place oven racks in desired positions before turning
oven on. Always use oven mitts when the oven is warm. If a rack
must be moved while the oven is hot, do not let oven mitts contact
hot heating elements.

To avoid possible injury or damage to the appliance, ensure rack is
installed exactly per installation instructions and not backwards or
upside down.

1. Hold the rack on a slight angle.

2. Engage the rear hooks in the accessory brackets.

3. Hold the rack straight.

4. Push the rack in until it is even with the front hooks.

English 1

Cleaning and Maintenance

Wash with hot soapy water. Rinse thoroughly and dry, or gently rub with cleansing
powder or soap-filled pads as directed. Avoid getting cleansing powder in the
telescopic slides. Relubrication may become necessary. Use only high-temperature
food-grade lubricants to re-lubricate slides.

DO NOT clean the rack in the self-cleaning oven.

5. Lift the rack up.

6. Push the rack in completely.

7. Engage the rack’s front hooks in the accessory brackets.

This is very important to ensure that
the rack is installed correctly (see the
enlarged picture).

Questions?

1-866-44SIEMENS (447-4363)

www.siemens-home.com

We look forward to hearing from you!

English 2