EN Dear Customer,
Gigaset Communications GmbH is the legal successor to
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), which in turn continued the Gigaset business
of Siemens AG. Any statements made by Siemens AG or
SHC that are found in the user guides should therefore be
understood as statements of Gigaset Communications
.
GmbH
We hope you enjoy your Gigaset.
DE Sehr geehrte Kundin, sehr geehrter Kunde,
FR Chère Cliente, Cher Client,
IT Gentile cliente,
NL Geachte klant,
ES Estimado cliente,
PT SCaros clientes,
die Gigaset Communications GmbH ist Rechtsnachfolgerin
der Siemens Home and Office Communication Devices
GmbH & Co. KG (SHC), die ihrerseits das Gigaset-Geschäft
der Siemens AG fortführte. Etwaige Erklärungen der
Siemens AG oder der SHC in den Bedienungsanleitungen
sind daher als Erklärungen der Gigaset Communications
GmbH zu verstehen.
Wir wünschen Ihnen viel Freude mit Ihrem Gigaset.
la société Gigaset Communications GmbH succède en droit
à Siemens Home and Office Communication Devices GmbH
& Co. KG (SHC) qui poursuivait elle-même les activités Gigaset de Siemens AG. Donc les éventuelles explications de Siemens AG ou de SHC figurant dans les modes d’emploi
doivent être comprises comme des explications de Gigaset
Communications GmbH.
Nous vous souhaitons beaucoup d’agrément avec votre
Gigaset.
la Gigaset Communications GmbH è successore della Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC) che a sua volta ha proseguito l’attività della
Siemens AG. Eventuali dichiarazioni della Siemens AG o
della SHC nei manuali d’istruzione, vanno pertanto intese
come dichiarazioni della Gigaset Communications GmbH.
Le auguriamo tanta soddisfazione con il vostro Gigaset.
Gigaset Communications GmbH is de rechtsopvolger van
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), de onderneming die de Gigaset-activiteiten
van Siemens AG heeft overgenomen. Eventuele uitspraken
of mededelingen van Siemens AG of SHC in de gebruiksaanwijzingen dienen daarom als mededelingen van Gigaset
Communications GmbH te worden gezien.
Wij wensen u veel plezier met uw Gigaset
la Gigaset Communications GmbH es derechohabiente de la
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC) que por su parte continuó el negocio Gigaset
de la Siemens AG. Las posibles declaraciones de la
Siemens AG o de la SHC en las instrucciones de uso se
deben entender por lo tanto como declaraciones de la Gigaset Communications GmbH.
Le deseamos que disfrute con su Gigaset.
Gigaset Communications GmbH é a sucessora legal da Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), que, por sua vez, deu continuidade ao sector
de negócios Gigaset, da Siemens AG. Quaisquer declarações por parte da Siemens AG ou da SHC encontradas nos
manuais de utilização deverão, portanto, ser consideradas
como declarações da Gigaset Communications GmbH.
Desejamos que tenham bons momentos com o seu Gigaset.
DA Kære Kunde,
FI Arvoisa asiakkaamme,
SV Kära kund,
NO Kjære kunde,
EL Αγ α πητή πελάτισσα, αγαπητέ πελάτη,
HR Poštovani korisnici,
.
SL Spoštovani kupec!
Gigaset Communications GmbH er retlig efterfølger til Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), som fra deres side videreførte Siemens AGs
Gigaset-forretninger. Siemens AGs eller SHCs eventuelle
forklaringer i betjeningsvejledningerne skal derfor forstås
som Gigaset Communications GmbHs forklaringer.
Vi håber, du får meget glæde af din Gigaset.
Gigaset Communications GmbH on Siemens Home and
Office Communication Devices GmbH & Co. KG (SHC)-yri-
tyksen oikeudenomistaja, joka jatkoi puolestaan Siemens
AG:n Gigaset-liiketoimintaa. Käyttöoppaissa mahdollisesti
esiintyvät Siemens AG:n tai SHC:n selosteet on tämän
vuoksi ymmärrettävä Gigaset Communications GmbH:n
selosteina.
Toivotamme Teille paljon iloa Gigaset-laitteestanne.
Gigaset Communications GmbH övertar rättigheterna från
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), som bedrev Gigaset-verksamheten efter Siemens AG. Alla förklaringar från Siemens AG eller SHC i
användarhandboken gäller därför som förklaringar från
Gigaset Communications GmbH.
Vi önskar dig mycket nöje med din Gigaset.
Gigaset Communications GmbH er rettslig etterfølger etter
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), som i sin tur videreførte Gigaset-geskjeften i
Siemens AG. Eventuelle meddelelser fra Siemens AG eller
SHC i bruksanvisningene er derfor å forstå som meddelelser
fra Gigaset Communications GmbH.
Vi håper du får stor glede av din Gigaset-enhet.
η Gigaset Communications GmbH είναι η νομική διάδοχος της
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), η οποία έχει αναλάβει την εμπορική
δραστηριότητα Gigaset της Siemens AG. Οι δηλώσεις της
Siemens AG ή της SHC στις
επομένως δηλώσεις της Gigaset Communications GmbH.
Σας ευχόμαστε καλή διασκέδαση με τη συσκευή σας Gigaset.
Gigaset Communications GmbH pravni je sljednik tvrtke
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), koji je nastavio Gigaset poslovanje tvrtke
Siemens AG. Zato sve izjave tvrtke Siemens AG ili SHC koje
se nalaze u uputama za upotrebu treba tumačiti kao izjave
tvrtke Gigaset Communications GmbH.
Nadamo se da sa zadovoljstvom koristite svoj Gigaset
uređaj.
Podjetje Gigaset Communications GmbH je pravni naslednik
podjetja Siemens Home and Office Communication Devices
GmbH & Co. KG (SHC), ki nadaljuje dejavnost znamke
Gigaset podjetja Siemens AG. Vse izjave podjetja Siemens
AG ali SHC v priročnikih za uporabnike torej veljajo kot izjave
podjetja Gigaset Communications GmbH.
Želimo vam veliko užitkov ob uporabi naprave Gigaset.
οδηγίες χρήσ
ης αποτ
ελούν
Issued by
Gigaset Communications GmbH
Schlavenhorst 66, D-46395 Bocholt
Gigaset Communications GmbH is a trademark
licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved.
Subject to availability. Rights of modifications
reserved.
www.gigaset.com
CS Vážení zákazníci,
společnost Gigaset Communications GmbH je právním
nástupcem společnosti Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC), která dále
přejala segment produktů Gigaset společnosti Siemens AG.
Jakékoli prohlášení společnosti Siemens AG nebo SHC, které
naleznete v uživatelských příručkách, je třeba považovat za
prohlášení společnosti Gigaset Communications GmbH.
Doufáme, že jste s produkty Gigaset spokojeni.
SK Vážený zákazník,
Spoločnosť Gigaset Communications GmbH je právnym
nástupcom spoločnosti Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC), ktorá zasa
pokračovala v činnosti divízie Gigaset spoločnosti Siemens
AG. Z tohto dôvodu je potrebné všetky vyhlásenia
spoločnosti Siemens AG alebo SHC, ktoré sa nachádzajú v
používateľských príručkách, chápať ako vyhlásenia
spoločnosti Gigaset Communications GmbH.
Veríme, že budete so zariadením Gigaset spokojní.
PL Szanowny Kliencie,
Firma Gigaset Communications GmbH jest spadkobiercą
prawnym firmy Siemens Home and Office Communication
Devices GmbH & Co. KG (SHC), która z kolei przejęła
segment produktów Gigaset od firmy Siemens AG. Wszelkie
oświadczenia firm Siemens AG i SHC, które można znaleźć
w instrukcjach obsługi, należy traktować jako oświadczenia
firmy Gigaset Communications GmbH.
Życzymy wiele przyjemności z korzystania z produktów
Gigaset.
TR Sayın Müşterimiz,
Gigaset Communications GmbH, Siemens AG'nin Gigaset
işletmesini yürüten Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC)'nin yasal
halefidir. Kullanma kılavuzlarında bulunan ve Siemens AG
veya SHC tarafından yapılan bildiriler Gigaset
Communications GmbH tarafından yapılmış bildiriler olarak
algılanmalıdır.
Gigaset'ten memnun kalmanızı ümit ediyoruz.
RO Stimate client,
Gigaset Communications GmbH este succesorul legal al
companiei Siemens Home and Office Communication
Devices GmbH & Co. KG (SHC), care, la rândul său, a
continuat activitatea companiei Gigaset a Siemens AG.
Orice afirmaţii efectuate de Siemens AG sau SHC şi incluse
în ghidurile de utilizare vor fi, prin urmare, considerate a
aparţine Gigaset Communications GmbH.
Sperăm ca produsele Gigaset să fie la înălţimea dorinţelor
dvs.
SR Poštovani potrošaču,
Gigaset Communications GmbH je pravni naslednik
kompanije Siemens Home and Office Communication
Devices GmbH & Co. KG (SHC), kroz koju je nastavljeno
poslovanje kompanije Gigaset kao dela Siemens AG. Stoga
sve izjave od strane Siemens AG ili SHC koje se mogu naći u
korisničkim uputstvima treba tuma
Gigaset Communications GmbH.
Nadamo se da ćete uživati u korišćenju svog Gigaset
uređaja.
BG Уважаеми потребители,
Gigaset Communications GmbH е правоприемникът на
Siemens Home and Office Communication Devices GmbH
& Co. KG (SHC), която на свой ред продължи бизнеса на
подразделението Siemens AG. По тази причина
всякакви изложения, направени от Siemens AG или
SHC, които се намират в ръководствата за
потребителя, следва да се разбират като изложения на
Gigaset Communications GmbH.
Надяваме се да ползвате с удоволствие вашия Gigaset.
izjave kompanije
čiti kao
RU Уважаемыи покупатель!
Компания Gigaset Communications GmbH является
правопреемником компании Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC), которая,
ою очередь, приняла подразделение Gigaset в свое
в св
управление от компании Siemens AG. Поэтому любые
заявления, сделанные от имени компании Siemens AG
или SHC и встречающиеся в руководствах
пользователя, должны восприниматься как заявления
компании Gigaset Communications GmbH.
Мы надеемся, что продукты Gigaset удовлетворяют
вашим требованиям.
HU T
isztelt Vásárló!
A Siemens Home and Communication Devices GmbH & Co.
KG (SHC) törvényes jogutódja a Gigaset Communications
GmbH, amely a Siemens AG Gigaset üzletágának utódja.
Ebből következően a Siemens AG vagy az SHC felhasználói
kézikönyveiben található bármely kijelentést a Gigaset
Communications GmbH kijelentésének kell tekinteni.
Reméljük, megelégedéssel használja Gigaset készülékét.
Issued by
Gigaset Communications GmbH
Schlavenhorst 66, D-46395 Bocholt
Gigaset Communications GmbH is a trademark
licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved.
Subject to availability. Rights of modifications
reserved.
www.gigaset.com
s
Be inspired
Contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Information about positioning the adapter . . . . . . . 4
Position and surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Temperature and environmental conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wireless connection with the Gigaset USB Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Information about the operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
USB socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Local adapter and Remote adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Base and Portable part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting to your base station . . . . . . . . . . . . . . . . 8
Gigaset 3070/75isdn, Gigaset 4170/75isdn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the Gigaset USB Adapter DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Resetting the Gigaset USB Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Launching the configuration program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Registering the Gigaset USB Adapter DECT with the base station . . . . . . . . . . . . . . . 11
Connection tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Local station tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Partner station tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Information about the COM port . . . . . . . . . . . . . 15
Information about operating the adapter . . . . . . 15
Several PCs sharing a base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Switching wireless connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1
Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Checking the preconditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Error messages in the configuration program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Other errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Guarantee certificate (United Kingdom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Guarantee certificate (Ireland) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2
Safety precautions
Safety precautions
Safety precautions
u The operation of medical appliances may be affected.
u The Gigaset USB Adapter DECT can cause a buzzing noise in hearing aids.
u Do not set the Gigaset USB Adapter up in bathrooms.
u Do not use the Gigaset USB Adapter in environments exposed to explosion hazards.
u Avoid the immediate proximity of heat sources such as radiators and do not expose
the Gigaset USB Adapter to direct sunlight.
u Always pass on the Gigaset USB Adapter DECT with the installation instructions and
CD-ROM.
u Use only the supplied USB cable for connecting your USB Adapter to the PC.
u Do not insert or remove the USB cable during a storm. This could cause an electric
shock.
u Do not extend the USB cable. This could lead to higher EMV -radiation.
u Dispose of devices in an environmentally friendly manner as per statutory
requirements.
The Gigaset USB Adapter DECT can be used in those countries listed on the adapter.
Country-specific circumstances have been taken into consideration.
Wireless transmission between the base station and portable part is based on the
DECT Standard. The Gigaset USB Adapter DECT complies with the pertinent European
requirements. Should there nevertheless be any picture and sound interference with
satellite receivers, please consult your retailer to have your satellite receiver equipment
tested for poor shielding.
Trademarks
Microsoft®, Windows® 98SE, Windows® ME, Windows® 2000 and Windows®XP are
registered trademarks of the Microsoft Corporation.
Adobe® Acrobat® is a registered trademark of Adobe Systems Incorporated.
3
Information about positioning the adapter
Information about positioning the adapter
Position and surface
You should not place the Gigaset USB Adapter DECT in the immediate vicinity of other
electronic equipment. Electrical devices can interfere with each other.
Place the Gigaset USB Adapter on a level, non-slip surface. Protect particularly sensitive
surfaces.
Depending on the surroundings, the range for wireless connection outdoors is
approx. 300 m, indoors approx. 50 m.
Temperature and environmental conditions
The Gigaset USB Adapter DECT is designed for use in enclosed rooms with a temperature
range of +5 °C to +45 °C and 20–75% relative humidity.
Overview
Wireless connection with the Gigaset USB Adapter
The Gigaset USB Adapter permits a wireless connection between a PC and a base
station. For example, you can sit in your garden with a Laptop and still surf the Internet.
The Gigaset USB Adapter is supplied with power via the USB port.
The Gigaset USB Adapter DECT is connected to the USB interface, but the
i
PC acts as if it were connected to a COM interface. You will find more
detailed explanations in Chapter "Information about the COM port" on
page 15.
Gigaset
41
75
isdn
Gigaset
4
1
75
isdn
or
2
3
1
4
Wireless link
or
4
Overview
Contents
u 1 Gigaset USB Adapter DECT
u 1 USB connection cable
u 1 CD-ROM
u 1 booklet (9 languages)
Information about the operating instructions
The installation wizard provides direct access to various operating instructions. First
select your languages and then you can either start installation straight away or read the
instructions of the various devices. You should also consult the Readme file on the CD,
as this may contain the latest changes.
LEDs
Operating LED
Data LED
2
3
1
4
Operating LED
flashes slowly The Gigaset USB Adapter is looking for the
base station or no base station has been
registered.
constantly
illuminated
The Gigaset USB Adapter has found a
connection to the base station.
Data LED
off No data transfer
on (flickering) Data transfer active
Both LEDs flash alternately
Operating LED The Gigaset USB Adapter is in registration
Data LED
mode.
5
Overview
3
2
4
1
USB socket
i
The easiest way to set up your Gigaset USB Adapter is with the installation
wizard, which runs automatically when you insert the CD-ROM.
During installation, the installation wizard will prompt you to insert the
USB cable.
A USB cable can be inserted and removed while the PC is one. If the
connected device has already been set up, Windows will recognise it
automatically.
The first time a new device is connected, Windows will launch its
automatic hardware recognition tool.
If you inserted the USB cable before the installation wizard prompted you
to:
ìììì Cancel automatic hardware recognition.
2
3
1
4
6
Local adapter and Remote adapter
You can also determine the settings for the partner station on the local station
(Gigaset USB Adapter).
Base and Portable part
Base station = Gigaset base station
Portable part = handset, device registered with the base station.
Example: Only a Gigaset USB Adapter of type Portable part can have an active
connection to a Gigaset base station.
Overview
7
Connecting to your base station
Connecting to your base station
The Gigaset USB Adapter DECT can be operated on the following Gigaset base stations:
Gigaset CX100/150isdn, Gigaset SX100/150isdn, Gigaset CX203/235isdn,
Gigaset SX205/255isdn, Gigaset SX303/353isdn, Gigaset 4170/75isdn and
Gigaset 3070/75isdn.
The following operating systems are supported: Windows® 98SE, Windows® NT,
Windows® ME, Windows® 2000 and Windows® XP.
Gigaset Repeater:
The Gigaset Repeater cannot be used to extend the wireless range of the
i
Gigaset 3070/75isdn, Gigaset 4170/75isdn
You have to update the Gigaset SX205/255isdn firmware. The firmware will be updated
automatically if you activate the Check firmware version option during installation.
Gigaset USB Adapter.
Several Gigaset USB Adapters
If you are operating several Gigaset USB Adapters on a base station,
please read Chapter "Several PCs sharing a base station" on page 15.
Installation
System requirements
u PC with operating system Windows® 98SE, NT, ME, 2000 or XP
u 5 MB free hard disk memory
u 1 free USB socket
u 1 CD-ROM drive (or DVD drive)
Installing the Gigaset USB Adapter DECT
Use the installation wizard to set up your Gigaset USB Adapter. The
i
The Gigaset USB Adapter should not be connected to the PC when you start installation.
During installation, the installation wizard will prompt you to insert the USB cable. If it
is already inserted, remove it and then re-insert it after a few moments.
i
ìììì Make sure your base station is in idle state.
8
installation wizard will make sure that all the necessary settings and
additional software have been included.
If a dialogue window appears during installation informing you about a
missing signature, click Continue installation.
Installation
ìììì Insert the CD-ROM into your CD-ROM drive.
The installation wizard will start automatically. If Autostart has been disabled on
your system, launch the installation wizard manually:
– Open Windows Explorer
– Select the CD-ROM drive
–Double-click start.exe.
This will start the installation wizard.
ìììì Select the language.
This opens the installation wizard's main menu. You can either read the Readme file or
the Gigaset isdn series operating instructions, open Service & Support on the Internet,
or start installation.
ìììì Click Install software.
ìììì Select your base station.
ìììì If necessary, activate the Check firmware version option (not available for all base
stations).
!
For Gigaset 4170/75isdn and Gigaset 3070/75isdn you will have to
activate the Check firmware version option.
ìììì Only for Gigaset SX205/255isdn, Gigaset SX303/353isdn, Gigaset 4170/75isdn
and Gigaset 3070/75isdn:
Activate the Wireless via Gigaset USB Adapter option.
ìììì Only for Gigaset SX205/255isdn, Gigaset SX303/353isdn:
If you want more than the wireless Internet connection, you can install additional
software. You can choose the following software components:
talk&surf 6.0 The talk&surf software enables you to configure your base station
and connected handsets. You can manage your directory and copy
it to the handsets. You can also view your calls lists and manage the
call charges. For further information please read the talk&surf 6.0
operating instructions.
CAPI You only need the CAPI driver if you want to send faxes using your
PC. For more information please read the Chapter "Installing the
CAPI driver" in the talk&surf 6.0 operating instructions.
FAX You can send faxes from your PC if you connect the Gigaset USB
Adapter directly to the USB port. For more information please read
the corresponding chapter in the talk&surf 6.0 operating
instructions.
ìììì Select the installation folder.
ìììì Start installation.
ìììì When prompted, connect your Gigaset USB Adapter to your PC.
This will start the Windows automatic hardware recognition.
ìììì During hardware recognition, select the option Look for suitable driver for the
device (the exact wording will depend on the Windows operating system you are
using).
ìììì Activate the option CD-ROM drives.
9
Installation
ìììì Click browse and enter the following file: xxx
ìììì Confirm installation of the USB driver with OK.
During further installation, the configuration dialogue for your Gigaset USB Adapter will
be opened. The Gigaset USB Adapter is assigned a COM port.
After the USB Adapter has been installed, the wizard will install the software for your
base station and any additional software required.
ìììì Confirm successful installation with Close.
ìììì Depending on the operating system, you may be prompted to reboot your PC.
i
If you want to install Acrobat® Reader, cancel automatic reboot, install
Acrobat® Reader, and then reboot the PC manually.
Resetting the Gigaset USB Adapter
If you have already started using the Gigaset USB Adapter, but now want to install it with
a different base station, you should first reset the USB Adapter to its default settings. All
the data and registrations you have changed or made will be deleted.
ìììì Run the Gigaset USB Adapters configuration program:
Start > Programs > Gigaset > Configuration of USB Adapter
ìììì Select the Local adapter tab.
ìììì Select Reset and confirm the warning prompt.
ìììì You should also reset the registration of the registered partner stations.
ìììì Close the configuration program.
After resetting, you can reinstall the T-Sinus 721. Follow the instructions in Chapter
"Installing the Gigaset USB Adapter DECT" on page 8.
10
Configuration
Configuration
Launching the configuration program
The installation wizard opens the configuration program and takes over registration of
your Gigaset USB Adapter. If you want to change the settings later on, run the
configuration program.
ìììì Select Start > Programs > Configuration of USB Adapter.
This opens the configuration program. It has four tabs where you can determine the
settings for your Gigaset USB Adapter.
Registering the Gigaset USB Adapter DECT with
thebasestation
i
To register the USB Adapter with a different base station:
During initial installation, the installation wizard will guide you through
the registration with the base station.
ìììì Open the Connection tab.
ìììì The Status: section must display Configuration state.
ìììì Open the Local adapter tab.
ìììì In the Registered %s bases section, choose a free registration location.
ìììì Put your base station into registration mode (see the base station operating
instructions).
ìììì Click Register.
ìììì Enter the base station PIN (1–8 digits, factory setting 0000).
The Gigaset USB Adapter will then register with your base station. After successful
registration, you will find the name of your base station in the Registered %s bases
field.
For detailed explanations of the configuration program, please read the descriptions of
the individual tabs.
If registration is not possible, (base station not ready for registration or not connected
to the power supply, wrong PIN), you will see a message indicating the cause of the
problem.
11
Configuration
Connection tab
Connecting the Gigaset USB Adapters DECT to the PC
Serial port: The Gigaset USB Adapter will look for a free COM port for
connection. Manual changing of the setting is only
necessary where several USB adapters are connected to the
same PC/Laptop.
Status: Configuration state, once the port was found. If no port is
found, the field remains empty.
No automatic
detection at program
start-up
Data/wireless connection
Connection partner: After successful registration, you will find the name of the
Field strength: /
Quality:
Radio link status: With an open connection, you will see Connection set up
Data link status With an open connection, you will see Connection set up
Select this option only if more than one Gigaset USB Adapter
is connected. Then select a COM port in the upper pane.
connected base station here. If several base stations have
been registered, select the base station your Gigaset USB
Adapter is to set up a connection to.
If your Gigaset USB Adapter has set up a connection to a base
station, this field will show a bar diagram reflecting the
reception strength and quality of the connection. If no
connection is made, the fields remain empty.
Depending on the surroundings, the range for wireless
connection between local and partner station outdoors is
approx. 300 m, indoors approx. 50 m.
here. If no connection is made, the No connection field
remains empty.
here. If no connection is made, the unknown remains
empty.
12
Configuration
Local station tab
Here you can make all the settings for data transmission, including the settings for the
partner station.
Identification
Name The stations' names provide a fast overview. It's best to call
the local station "PC", the partner stations by connected
device, e. g. "Gigaset SX303/353isdn".
You can change a station name by editing or entering the
name in the name field, using letters, digits, space and
special characters. The name must not exceed 20 characters.
Adapter type: Your USB Adapter is operated as extension at the base
station.
Hardware version: /
Firmware version:
Reset Use this function to restore the Gigaset USB Adapter
The version numbers of the hardware and firmware are
displayed.
connected to the PC to its factory settings. You will see a
confirmation prompt which you have to acknowledge. All
the parameters and registrations are returned to their
default values. The partner station is not affected. If you
want to completely delete the connection, you will have to
run the Unregister function at the base station. Only then
are all the connection parameters deleted.
Registered base stations
You can enter up to six base stations in the window. This allows you to connect the
Gigaset USB Adapter flexibly to the one and then the other base station.
Register Create a new connection.
ìììì Select a free registration location or registered base
station.
ìììì Put the base station to be connected into registration
mode (see the base station operating instructions).
ìììì Click Register.
ìììì Enter the base station PIN
(1–8 digits, factory setting 0000).
Unregister Create a new connection.
ìììì Select a registered connection.
ìììì Click Unregister.
The registered base station is removed from the list.
Connect Connect a registered connection.
ìììì Select a registered connection.
ìììì Click Connect.
13
Configuration
Partner station tab
When there is a connection, you can view the base station's settings.
ìììì Open the Local adapter tab.
ìììì Select a registered base station.
ìììì Click Connect.
ìììì Open the Remote adapter tab.
This displays the base station's settings.
Identification
Name / Adapter type: /
Hardware version: /
Firmware version:
Registered data terminals
The window shows all the registered devices. On the left is the name, while on the right
the active connection is indicated with a green arrow. If no device is connected, all the
entries in the Remote adapter tab are shown as not active.
This displays the data of the connected base station.
14
Information about the COM port
Information about the COM port
A COM port is a serial interface on the PC. It can be used to connect external devices
such as a mouse with the PC.
A PC has several COM ports:
u COM 1, COM 2: Hardware-side, sockets on the PC for connecting devices with a
serial connection
u COM 3 etc.: software side, virtual interfaces that can be assigned to devices with
USB connections
Your Gigaset USB Adapter uses one of the software-side interfaces, e.g. COM 3 or
COM 4.
Information about operating the adapter
If you use a Gigaset USB Adapter, you cannot use the channel bundling and fax functions
of your Gigaset base station. Two PCs (one wireless, the other via USB) can however surf
the Internet at the same time.
Several PCs sharing a base station
Station type: Portable part 1
2
3
1
4
Station type: Portable part 2
Wireless operation active
Wireless operation
2
3
1
4
inactive
Base station
Gigaset
4
1
7
5
isdn
Gigaset
4
1
7
5
isdn
USB
15
Information about operating the adapter
Example: A PC and Laptop share a Gigaset base station.
u Only one can set up the wireless connection. The connection can however be
switched, see Chapter "Switching wireless connection" on page 16.
u One of the two portable parts and the PC, with which the base station is connected,
can surf the Internet at the same time.
Switching wireless connection
Example: User 1 is using the wireless connection. He wants to terminate the connection
so that participant 2 can use it.
User 1:
ìììì Look for the icon for wireless connection in the status area of the tool bar (next to
the clock).
ìììì Right-click the wireless connection icon.
ìììì Click Deactivate wireless operation or Prepare USB direct operation.
Activate wireless operation
Deactivate wireless operation
Prepare USB direct operation
User 2:
ìììì Right-click the wireless connection icon.
ìììì Click Activate wireless operation.
Activate wireless operation
Deactivate wireless operation
Prepare USB direct operation
Activate wireless operation: Wireless mode remains deactivated until
the computer is rebooted. Then wireless mode will be activated again.
i
Prepare USB direct operation: Wireless mode remains deactivated until
it is activated again manually. Rebooting the computer does not
automatically activate wireless mode.
Icon
Ta skb ar
16
Trouble shooting
Trouble shooting
Checking the preconditions
In the event of problems, check the following first:
u All cables have been properly connected.
u Is the distance between the base station and the portable part too large? If this could
be the case, place the devices next to each other for testing. If the connection can
now be set up, gradually increase the distance and check the connection quality in
the Connection tab of the configuration program. You will find more information in
Chapter "Information about positioning the adapter" on page 4.
u Was registration error-free? If not, try repeating installation.
Error messages in the configuration program
Error message Cause Remedy
No Gigaset USB
Adapter DECT could be
found
Registration not
possible.
PIN is incorrect. The PIN entered does not
The COM port is being used by
another program.
The base station may not be
in registration mode or the
wireless connection is
interrupted.
match the valid PIN.
Close the application using
the COM port. The device
manager in the Windows
control panel will show you
how the ports are being
used at the moment.
Repeat regis tration with the
base station in registration
mode. See "Registering the
Gigaset USB Adapter DECT
with the base station" on
page 11.
If you have forgotten your
PIN, reset the Gigaset USB
Adapter to the factory
setting, see Chapter
"Resetting the Gigaset USB
Adapter" on page 10.
In factory setting, the PIN is
0000.
17
Trouble shooting
Other errors
Picture fault Remedy
Screen problems with
connected Gigaset USB
Adapter DECT (e. g.
slight flickering or
Moiré).
The loudspeaker buzzes
when the Gigaset USB
Adapter is connected.
The DECT HF useful signal is
influencing the monitor.
DE CT H F us efu l si gna l is bein g
demodulated by the analogue
components of the soundcard
or the amplifiers of the
speakers, thus causing the
buzzing noise.
Turn the Gigaset USB
Adapter until the picture
improves. Move the
Gigaset USB Adapter
further away from the
monitor, or place
something between the
monitor and the USB
Adapter.
Turn the Gigaset USB
Adapter until the picture
improves. Move the
Gigaset USB Adapter
further away from the
loudspeakers, or place
something between the
loudspeaker and the
USB Adapter.
18
Technical Data
Standard: DECT = Digital Enhanced Cordless Telecommunications
Number of channels: 120 duplex channels
Wireless frequency range: 1880 MHz to 1900 MHz
Transmission power: 10 mW, average power per channel
Range:
Power supply: USB powered
Power consumption:
Permissible environmental
conditions for operation:
USB socket: Type B socket
Standards applied:
Service (Customer Care)
You have access to straightforward support concerning with technical aspects of your
device and how to operate it through our Online Support on the Internet:
up to 300 m with line of sight,
up to 50 m indoors
in standby approx. 4 W
in data transfer approx. 4 W
+5 °C to +45 °C
20 % to 75 % relative humidity
DECT as per CTR 6
Electrical safety as per EN 60950
www.my-siemens.com/customercare
or you can refer to the section "Trouble shooting" on page 17.
If you have any trouble with the equipment, please contact the Siemens telephone
service:
United Kingdom 0 87 05 33 44 11
Ireland 18 50 77 72 77
The Siemens Service is only available to deal with device faults only. Your specialist
dealer will be able to help you with any questions about operating your device.
Please address any questions about the DSL or cable connection to your network
provider.
19
Guarantee certificate (United Kingdom)
Without prejudice to any claim the user (customer) may have in relation to the dealer or
retailer, the customer shall be granted a manufacturer's Guarantee under the conditions
set out below:
u In the case of new devices and their components exhibiting defects resulting from
manufacturing and/or material faults within 24 months of purchase, Siemens shall,
at its own option and free of charge, either replace the device with another device
reflecting the current state of the art, or repair the said device. In respect of parts
subject to wear and tear (including but not limited to, batteries, keypads, casing),
this warranty shall be valid for six months from the date of purchase.
u This Guarantee shall be invalid if the device defect is attributable to improper
treatment and/or failure to comply with information contained in the user manuals.
u This Guarantee shall not apply to or extend to services performed by the authorised
dealer or the customer themselves (e.g. installation, configuration, software
downloads). User manuals and any software supplied on a separate data medium
shall be excluded from the Guarantee.
u The purchase receipt, together with the date of purchase, shall be required as
evidence for invoking the Guarantee. Claims under the Guarantee must be
submitted within two months of the Guarantee default becoming evident.
u Ownership of devices or components replaced by and returned to Siemens shall vest
in Siemens.
u This Guarantee shall apply to new devices purchased in the European Union. The
Guarantee is issued by Siemens plc, Siemens House, Oldbury, Bracknell, Berkshire,
RG12 8FZ.
u Any other claims resulting out of or in connection with the device shall be excluded
from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a
Customers Statutory Rights, nor the manufacturer's liability for death or personal
injury resulting from its negligence.
u The duration of the Guarantee shall not be extended by services rendered under the
terms of the Guarantee.
u Insofar as no Guarantee default exists, Siemens reserves the right to charge the
customer for replacement or repair.
u The above provisions does not imply a change in the burden of proof to the
detriment of the customer.
To invoke this Guarantee, please contact the Siemens telephone service. The relevant
number is to be found in the accompanying user guide.
20
Guarantee certificate (Ireland)
Scope
u This equipment guarantee applies to end users ("customers"). This guarantee does
not in any way affect the customer's statutory rights.
u The guarantee applies to the supplied devices and all their components but not to
their installation or configuration or to the services provided by the dealer. Manuals
and any software supplied on a separate data medium are excluded from the
guarantee. This guarantee does not apply to decorative covers or any other
personalised parts or software not included in the scope of supply. The guarantee
also does not apply to decorative top or bottom shells for special editions.
u The guarantee provides for devices or components that, despite proper care and
use, have demonstrably developed defects due to faulty workmanship and/or faulty
materials to be replaced or repaired at our discretion free of charge. The guarantee
does not cover normal wear and tear. Alternatively, we reserve the right to replace
the defective device with a successor model or reimburse the original purchase price
on return of the defective device. Our decision is final. Any legal claims are excluded.
u Claims under the guarantee cannot be made if the defect or damage was caused by
improper care or use. Improper care or use includes the following:
– Opening the device (this is classed as third-party intervention)
– Manipulating components on the printed circuit board
–Manipulating the software
– Defects or damage caused by dropping, breaking, lightning or ingress of
moisture. This also applies if defects or damage were caused by mechanical,
chemical, radio interference or thermal factors (e.g. microwave, sauna, etc.).
– Repairs or other work done by persons not authorised by us.
– Devices fitted with accessories not authorised by Siemens.
u Any further claims due to damage are excluded, such as damage arising outside the
device, provided this was not due to gross negligence and/or intent on our part.
u Claims under the guarantee must be made as soon as the defect is noticed.
u A till receipt showing the date of purchase must be presented as proof. Each claim
under the guarantee is accepted with the express reservation that subsequent
investigations confirm the validity of the claim.
u Any devices or components that are replaced become our property.
u The costs of materials and labour will be borne by us, but not the costs of transport,
postage or freight.
u We are entitled, at our discretion, to make technical changes (such as firmware
updates) beyond repair or replacement in order to upgrade the device to the latest
state of the art. There is no additional charge to the customer for this work. Our
decision is final. Any legal claims are excluded.
u The guarantee is valid in the country of purchase. It applies only if the device is
operated in the relevant geographical area in accordance with the information on
the packaging and in the operating instructions.
u Any further claims are excluded. Siemens is not liable in any circumstances for
downtime, loss of profits, loss of data or loss of any other information. The customer
alone is responsible for safeguarding such data and information.
u Changes to this guarantee require prior approval by Siemens in writing.
21
Guarantee period
u The guarantee applies in countries in the EU from 1 January 2002 for a period of 24
months.
u In all other countries the guarantee period shall be the relevant minimum statutory
guarantee period, but no longer than 24 months.
u The guarantee period starts on the day of purchase by the customer.
u A successful claim under the guarantee does not extend the guarantee period.
u Work under the guarantee is handled by our Customer Care Centres.
22
Index
. . . . . . . . . . . . . . . . . . .11
connection tab . . . . . . . . . . . . . . . .12
launching the configuration
program
local station tab
partner station tab. . . . . . . . . . . . . .14
registering the Gigaset USB Adapter
DECT with the base station
. . . . . . . . . . . . . . . . . . . .11
. . . . . . . . . . . . . . . .13
. . . . . .11
. . . . . .8
. . . . . . . . . . . . . . . . . .12
program . . . . . . . . . . . . . . . . . . . .17
4170/75isdn. . . . . . . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . . . .20
Gigaset 4170/75isdn
installing the
Gigaset USB Adapter DECT
resetting the Gigaset USB Adapter
system requirements. . . . . . . . . . . . .8
Installing the
Gigaset USB Adapter DECT
. . . . . . . . . . .8
. . . . . . .8
. . 10
. . . . . . .8
L
Launching the configuration program. 11
LEDs
. . . . . . . . . . . . . . . . . . . . . . . . . . .5
Local and partner station
Local station
Local station tab
. . . . . . . . . . . . . . . . . .7, 13
. . . . . . . . . . . . . . . . . 13
. . . . . . . . . . .7
O
Other errors . . . . . . . . . . . . . . . . . . . .18
Overview
. . . . . . . . . . . . . . . . . . . . . . .4
base station and portable parts . . . . . 7
contents
information about the operating
LEDs . . . . . . . . . . . . . . . . . . . . . . . . .5
local and partner station
USB socket. . . . . . . . . . . . . . . . . . . . .6
wireless connection with the
. . . . . . . . . . . . . . . . . . . . . .5
instructions
Gigaset USB Adapter
. . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . .4
. . . . . . . . . .7
several PCs sharing a base station
switching wireless connection . . . . .16
the adapter
. . . . . . . . . . . . . . . . . .15
. .15
. . . . .15
instructions
Gigaset 3070/75isdn,
. . . . . . . . . . . . . . . . . .5
P
Partner station . . . . . . . . . . . . . . . . 7, 14
Partner station tab . . . . . . . . . . . . . . .14
R
Registering the Gigaset USB Adapter
DECT with the base station. . . . . . 11
Registration
Resetting the Gigaset USB Adapter
. . . . . . . . . . . . . . . . . . . .11
. . . 10
23
Index
S
Service (Customer Care) . . . . . . . . . . . 19
Several PCs sharing a base station
Switching wireless connection . . . . . . 16
System requirements
. . . . . . . . . . . . . . 8
. . . . 15
T
Techn ic a l d a t a . . . . . . . . . . . . . . . . . . . 19
Tro u b l e s h o oting
checking the preconditions . . . . . . . 17
error messages in the configuration
program
other errors
. . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . 18
U
USB socket . . . . . . . . . . . . . . . . . . . . . . 6
W
Wireless connection with the
Gigaset USB Adapter . . . . . . . . . . . 4
24
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2003
All rights reserved.
Subject to availability.
All rights reserved.
Siemens Aktiengesellschaft
http://www.my-siemens.com
No.: A31008-X500-B100-1-7619
Loading...