Siemens BAAP Installation Instructions Manual
POWER SUPPLY
FP2011-U1 (170W)
OR
PAB-ENCL/-R
BAAP ADAPTER PLATE
P/N S54339-A14-A1
BOOSTER
AMPLIFIER
BOARD
P/N S54400-B137-A1
AUDIO
TRANSFORMER
KIT
P/N S54400-B58-A1
GROUND LUG
18AH BP-61
BATTERIES
P/N 175-387194
INSTALLATION INSTRUCTIONS
Model BAAP
Booster Amplifier Adapter Plate for use with 1HU and 2HU Universal Enclosures, Models PAB-ENCL/-R and
PAB2-ENCL/-R
INTRODUCTION
The BAAP Adapter Kit from Siemens Industry, Inc. is installed in the following enclosures:
1. PAB-ENCL, P/N S54339-A8-A1 (1HU Enclosure, Black)
2. PAB-ENCL-R, P/N S54339-A9-A1 (1HU Enclosure, Red)
3. PAB2-ENCL, P/N S54339-A10-A1 (2HU Enclosure, Black)
4. PAB2-ENCL-R, P/N S54339-A11-A1 (2HU Enclosure, Red)
INSTALLATION
Figure 1: Mounting the Adapter Plate in a PAB Enclosure (Black & Red)
A6V101061186_enUS_a Siemens Industry, I nc.
Building Technologies Division
2
POWER SUPPLY
OR
PAB-ENCL/-R
BAAP ADAPTER PLATE
P/N S54339-A14-A1
BOOSTER
AMPLIFIER
BOARD
P/N S54400-B137-A1
AUDIO
TRANSFORMER
KIT
P/N S54400-B58-A1
GROUND LUG
UP TO 33AH
BATTERIES
Figure 2: Mounting the Adapter Plate in a PAB2 Enclosure (Black & Red)
Hardware included in the kit:
1. #10-32 steel-zinc plated locknuts, QTY = 4
2. #4-40 x 7/8” long standoffs to be used to mount the audio transformer kit, QTY = 2.
3. Ground lug to be used for landing the shielding wires, QTY = 1.
Installation Steps:
1. It is preferable to mount the Booster assembly on the adapter plate first using the hardware provided
with the Booster Assembly.
2. Using the four locknuts provided, mount the adapter plate assembly inside the enclosure as shown in
Figures 1 and 2.
A6V101061186_enUS_a
Loading...