Sharp XL-UH5H User Manual

MODEL

XL-UR5H

MICRO COMPONENT SYSTEM

This Quick Start Guide will help you to correctly install and operate your system.

Accessories

Remote control battery installation

Use 2 “AAA” size batteries (UM-4, R03, HP-16 or similar).

1 Open the battery cover.

Remote control

AM loop aerial

System connections

××

× 1

××

× 1 FM aerial

××

Right speaker

“AAA” size battery (UM-4,

××

× 1

××

× 2

××

R03, HP-16 or similar)

2 Insert the batteries as shown.

3 Close the cover.

FM aerialAM loop aerial

Left speaker

FM ANT

75 OHMS

LOOP

XL-UH5H QG 3/13/07, 3:10 PM1

BEAT

CANCEL

FM ANT

75 OHMS

LOOP

RATED SPEAKER IMPEDANCE: 8 OHMS MIN

AC INPUT

RATED SPEAKER IMPEDANCE: 8 OHMS MIN

Red

Black

Wall socket (AC 230 V, 50 Hz)

92L02700573000 07D R AS 1

Turn on your system

The first time the unit is plugged in, the unit will enter the power stand-by mode.

1 Press the ON/STAND-BY button to turn the power on.

Listening to a CD or MP3/WMA disc

1 Press the ON/STAND-BY button to turn the power on.

2 Open the CD compartment.

3 Place the disc on the spindle, label side up. 8 cm (3") discs may be

played without an adaptor.

4 Close the CD compartment.

5 Press the CD

/ 6 button to start playback.

Listening to USB/SD mass storage device / MP3 player

USB indicator SD indicator

Total number of folders

12 cm (5")

WMA MP3

8 cm (3")

USB

Total number of tracks

1 Press the USB/SD

unit.

To select USB or SD function, press and hold the USB/SD 0 / 6 button for more than 2 seconds.

2 Press the TUNING/FOLDER (

3 Select desired track to be played back by pressing the

4 Press the USB/SD

XL-UH5H QG 3/13/07, 3:10 PM2

/ 6 button, and push up the USB door. Connect the USB memory device that has MP3/WMA format files on the

/ 6 button. Playback will start and the track name will be displayed.

) button to select desired playback folder.

5 35 3

5 3 or

5 35 3

2 42 4

2 4 button.

2 42 4

Open USB door

Insert USB memory device

Insert SD memory device