Sharp XL-S15H, EL-W200G User Manual

MICRO COMPONENT SYSTEM
MODEL
XL-S15H
If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland).
0101
This Quick Start Guide will help you to correctly install and operate your system.
1
Accessories
FM/AM loop aerial 1Remote control 1
2
Remote control battery installation
Use 2 “AAA” size batteries (UM-4, R03, HP-16 or similar). Batteries are not included.
1 Remove the battery cover.
3 Replace the cover.
3
System connections
Right speaker Left speaker
Wall socket (AC 230 - 240 V, 50 Hz)
FM aerial
Right speaker
AM loop aerial
Left speaker
White line
Black
4
Turn on your system
Press the ON/STAND-BY button to turn the power on.
TINSZA015SJZZ 04D N HK 1
Listening to a CD
Press the FUNCTION button until “Cd dISC” appears on the dis-
1
play. Press the CD EJECT button to open the CD compartment.
2
Place a CD on the spindle, label side up.
3
Listening to the radio
1
Press the FUNCTION button until “FM” or “AM” appears on the display.
2
Press the TUNING ( or ) button to tune in to the desired sta­tion.
When the TUNING button is pressed for more than 0.5 seconds, scan­ning will start automatically and the tuner will stop at the first receivable broadcast station.
To receive an FM stereo transmission: Press the FUNCTION button to display the “ST” indicator. “ ” will appear when an FM broadcast is in stereo.
Close the CD compartment by firmly pushing the corner marked
4
“PUSH CLOSE”. Press the button to start playback from track 1.
5
Listening to a cassette tape
Press the FUNCTION button until “TAPE” appears on the display.
1 2
Press the button to open the cassette compartment.
Load a cassette into the cassette compartment
3
with the side to be played facing toward you. Close the cassette compartment.
4 5
Press the button to start playback.
If trouble occurs
When this product is subjected to strong external interference (mechani­cal shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by re­setting it.
FM stereo receiving indicator
FM stereo mode indicator
Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 Whilst pressing down the MEMORY/SET button and the CLEAR
button, press the ON/STAND-BY button until "CL" appears.
Caution:
This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme.
Maintenance
Cleaning the CD pickup lens
Do not touch the laser pickup lens. If finger­prints or dust accumulate on the pickup, clean it gently with a dry cotton swab.
Cleaning the tape-handling parts
Dirty heads, capstan or pinch roller can cause poor sound and tape
jams. Clean these parts with a cotton swab moistened with commer­cial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch roller, etc., unplug the unit which con-
tains high voltages.
D
A Erase head B Recording/
Playback head
C Capstan D Pinch roller
C
A
B
After long use, the deck's heads and capstan may become magne­tised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording time by using a commercial tape head de­magnetiser. Read the demagnetiser's instructions carefully before use.
TINSZA015SJZZ
Loading...