Page 1
XL-1000H
XL-1100H
COMPACT AUDIO SYSTEM
Accessories
1
1
This Quick Guide will help you to correctly
install and operate your system.
If you require any advice or assistance regarding your Sharp product, please visit
our web-site www.sharp.co.uk/support.
Customers without internet access may
telephone 08705 274277 during office
hours (or (01) 676 0648 if telephoning from
Ireland).
Remote control × 1AC power lead × 1 AM loop aerial × 1
FM aerial × 1
Battery installation of remote control
2
2
Use 2 “AAA” size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
Remove the
123
battery cover.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Insert the batteries
as shown.
– 1 –
Speaker wire × 2
Replace the cover.
TINSE0069SJZZ A0101.HK
*XL1000H_QG 2001.6.6, 10:58 AM1
Page 2
System connections
3
3
FM aerial
AM loop aerial
MD recorder
To the optical line
input socket
TV
VCR, DVD, etc.
To the line
output socket
Right speaker
Connection cable
for digital recording
(not supplied)
RCA lead
(not supplied)
Left speaker
Wall socket
(AC 230 V, 50 Hz)
Right speaker
Headphones
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
– 2 –
*XL1000H_QG 2001.6.6, 10:58 AM2
Left speaker
White line
Black
Page 3
Turn on your system
4
4
Press the ON/STAND-BY button to turn the power on.
Listening to a CD
1
2
3
4
5
Press the FUNCTION button until “CD STOP” or “NO DISC” appears on
the display.
Press the
Place a CD on the spindle, label side up.
Press the
Total number of tracks
Press the
77
7 button to open the CD compartment.
77
12 cm (5")
7 7
7 button to close the CD compartment.
7 7
0606
06 button to start playback from track 1.
0606
8 cm (3")
Total playing time
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
– 3 –
*XL1000H_QG 2001.6.6, 10:58 AM3
Page 4
Listening to the radio
1
2
3
Press the FUNCTION button until “FM” or “AM” appears on the display.
XX
Press the TUNING (
When the TUNING button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
To receive an FM stereo transmission:
Press the FUNCTION button to display the
“ST” indicator.
● “j” will appear when an FM broadcast is in stereo.
WW
X or
W) button to tune in to the desired station.
XX
WW
FM stereo mode indicator
FM stereo receiving indicator
■ If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2.
If the unit is not restored in step 1, unplug and plug in the unit, and then turn the power on.
3.
If neither step 1 nor 2 restores the unit, do the following:
¡
Press the ON/STAND-BY button to enter the power stand-by mode.
™
Unplug the AC power lead from the AC INPUT socket on the unit.
œ
Whilst pressing down the MEMORY/SET button and the J button, plug the AC power lead into the AC
INPUT socket on the unit.
■
Maintenance
Do not touch the laser pickup lens. If fingerprints or dust accumulate on
the pickup, clean it gently with a dry cotton swab.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
– 4 –
*XL1000H_QG 2001.6.6, 10:58 AM4
AC INPUT
Loading...