Sharp VCM312HM User Manual

● CHILD LOCK

●SHARP SUPER PICTURE

VC-M312HM

VC-M312HM

VC-M312LM

VIDEO CASSETTE RECORDER

OPERATION MANUAL

SAFETY WARNINGS

Observe all warnings for your safety and to ensure trouble free use
of your VCR.

INFORMATION

Additional information complements instructions.

Dear SHARP Customer

Thank you for buying this SHARP VCR. Given proper care it will provide years of
entertainment for the whole family. Please read this operation manual carefully before
attempting to operate the VCR.

Copyright

● Audio-visual material may consist of copyrighted works which must not be recorded

without the authority of the owner of the copyright. Please refer to the relevant laws in
your country.

● No part of this publication may be reproduced, stored or transmitted in any form without

prior permission from SHARP Electronics (UK) Ltd.

●

®

and PlusCode® are registered trademarks of Gemstar Development

Corporation.

● The system is manufactured under license from Gemstar Development

Corporation.

THIS MANUAL COVERS A RANGE OF MODELS. ALL OF THE
FEATURES MENTIONED MAY NOT NECESSARILY APPLY TO YOUR
VCR.

(i)

3.CHILD LOCK

15. VOLUME

MENU SET

CLEAR

DISPLAY

STANDBY

DPSS

INPUT SELECT

CHANNEL

VIDEO CASSETTE RECORDER

SLOW

SV/V+

/TIMER

MODE OSD

INPUT

SELECT

CH

CH

OPERATE VOL

VOL

TV

TIMER

ON/OFF

AUDIO

OUT

SKIP

SEARCH

ZERO
BACK

TAPE

SPEED

TV/VCR

+

REC

PAUSE/STILL

REW FF

PLAY / X2

STOP

231

4

7

5

8

0

6

9

AM/PM

21. MODE ON SCREEN
DISPLA Y

23. CHANNEL

/

19. MENU SELECT

27 PAUSE/STILL

8. AM/PM or

26. PLAY/X2

22. DISPLAY

16. ZERO BACK

5.AUDIO OUT

This button has no
function with this model.

9. REWIND 25. FAST FORWARD

11.STOP

12. TAPE SPEED (SP/LP)

13. SLOW

28. DPSS

/SLOW SPEED /

+

2. INPUT SELECT

6. MENU

18. SET

20. CLEAR

10. RECORD

17. SKIP SEARCH

14. BASIC SHARP TV

CONTROLS

1. STANDBY

4. TIMER ON/OFF

7. SV/V+/TIMER

24. INPUT SELECT

29. TV/VCR

This button has no
function with this model.

/

+

VCR REMOTE CONTROL

VCR FRONT PANEL/REMOTE CONTROL EQUIVALENT FUNCTIONS.

If you prefer, or if remote control batteries fail, you will need to use the VCR front panel controls. The only
differences in function are shown below:

FUNCTION

OSD

Moving UP/DOWN menu
Moving LEFT/RIGHT menu

OPERATION WITH REMOTE

CONTROL

[]buttons
[ ] buttons

OPERATION WITH VCR

FRONT PANEL

CHANNEL buttons.
REW/FF buttons.

/

/

/

/

(ii)

TINS-3560UMZZ

Printed in U.K.

SHARP ELECTRONICS (U.K.) Ltd.

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC

as amended by 93/68/EEC.

• Specifications are subject to change without notice as part of our policy of continuous
improvement.

• No liability is accepted for any inaccuracies or omissions in this publication, although
every possible care has been taken to make it complete and as accurate as possible.

● If you are unable to resolve a problem using the TROUBLESHOOTING guide, do not

remove the cabinet or attempt to service this VCR yourself.

● For service please contact your dealer. If this is not possible, please call our Customer

Information Centre for details of your nearest Sharp Service Centre.

● Please note that for repairs during the guarantee period, you will need to produce

proof of purchase.

● SCART leads can be obtained from the SHARP Spare Parts Centre: Willow Vale

Electronics Ltd, Tel. Manchester 0161 682 1415/ Reading 01189 876444. Most
credit/debit cards accepted.

SHARP Helpline: Tel: [phone]

CALLING FOR SERVICE