High Brightness, High Visibility
With exceptionally high brightness of 1,500 cd/m2, the PN-V602 excels in brightly lit indoor
applications including window facing settings with high ambient light. Its high contrast
helps ensure images are clearly visible from a distance, enabling PN-V602 video wall
displays to be utilized in sports and entertainment facilities, transportation hubs, shopping
malls and control centers where the PN-V602 can provide vivid high quality images, 24
hours a day, seven days a week.
Breathtaking Image Quality
The PN-V602’s exceptional image quality comes from Sharp’s industry leading LCD
technologies. Sharp proprietary UV
class LCD panel provides highly efcient use of light from the full-array LED backlight while
simultaneously preventing light leakage. The results are exceptionally high quality images
with bright whites, amazingly vivid colors and extremely deep blacks. Sharp’s full-array
LED backlight, with LED elements evenly positioned across the entire panel, helps ensure
2
A*4 technology incorporated into the 60" diagonal
that Sharp multi-screen displays are bright, beautiful and uniform.
Local Dimming for High Contrast and Superb Energy Efficiency
Much of the PN-V602’s exceptional performance – including outstanding black levels, high
contrast and superb energy efciency is due to local dimming of the LED backlight. Local
dimming allows specic groups of LEDs to be dimmed for greater control of brightness and
darkness in different areas of the screen. Since LEDs in a black area of the screen image
can be independently turned off, local dimming can help to considerably reduce power
consumption. This helps the PN-V602 deliver signicantly better contrast (up to 1,000,000:1
contrast ratio with local dimming set to HIGH) and
brightness (up to 1,500 cd/m
2
) compared to conventional
LCD monitors, while utilizing signicantly less power.
* Results of Sharp measurements when displaying broadcast content (sub-clause 11.6) stipulated under IEC 62087 Ed. 2.0 and with brightness set to maximum.
Note that the power consumption reduction will vary depending on the images displayed.
*1: Does not include the gap between the monitors. *2: Non-display area for neighboring monitors is 7.1 mm. *3: Visibility of the seams between monitors will vary depending on such factors as the on-screen images
and the viewing angle. *4: UV2A stands for “Ultraviolet-induced Multi-domain Vertical Alignment,” a photo-alignment technology that ensures uniform alignment of liquid crystal molecules in a certain direction.
Ultra-Slim Bezel for Dynamic Video Walls
The PN-V602 boasts one of the slimmest bezels in the industry, resulting in the lines
between neighboring monitors in a video wall being only 6.5 mm*
bottom; 4.1 mm left and top)*
2
. This enables the high impact display of video wall images
of almost unlimited size and conguration. Optional Mirror Frames*
to further minimize lines between monitors by reecting mirror images from the display
content, helping create more dynamic video walls with an even smoother big picture effect.
Choice of Installation Mode
The PN-V602 offers the choice of landscape, portrait or “face-up/face-down” installation.
This allows customers to select the mode that best suits their content and application,
greatly expanding the possibilities for video walls and digital signage displays.
1
wide (2.4 mm right and
3
are also available
Specifications (tentative)
Model Name PN-V602
Installation
LCD Panel
Max. Resolution
Max. Display Colors (approx.)
Pixel Pitch (H x V)
Max. Brightness*
Contrast Ratio
Viewing Angle (H/V)
Active Screen Area (W x H)
Response Time
Computer Input Video
Synchronization
Plug & Play
Power Management
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the equipment, it is not possible to precisely maintain a constant level of brightness.
*2 Requires separately sold PN-ZB02 Interface Expansion Board. *3 Use a commercially available connection cable for PC and other video connections. *4 The mini D-sub 15-pin connector may be used with an
analog RGB computer source, component video source or composite video source. This is menu selectable. When used with a component or composite video source, a commercially available conversion cable
is required. *5 For both PC and AV components. *6 When the PN-V602 is equipped with the optional PN-ZB02 board, either the LCD monitor’ s standard-equipped video and component terminals or the PN-ZB02’s
video and component terminals can be selected for use from the menu.
Landscape / Portrait
60-inch widescreen (152.4 cm diagonal), UV
1,366 x 768 pixels
16.77 million colors
0.973 x 0.973 mm
1
2
1,500 cd/m
1,000,000 : 1 (local dimming set to HIGH)
5,000 : 1 (without local dimming)
176°/176° (CR ≥ 10)
1328.8 x 747.1 mm (52
6 ms (gray to gray, avg.)
Analog RGB (0.7 Vp-p) [75 Ω], Digital (conforms to DVI 1.0 standards)
Horizontal/vertical separation (TTL: positive/negative)
Sync-on-green, Composite sync (TTL: positive/negative)
VESA DDC2B
VESA DPMS, DVI DMPM
5
/8" x 29 7/16")
2
A LCD
Video Color System
Input Terminals*
Via Optional PN-ZB02 Board
Output Terminals*
Via Optional PN-ZB02 Board
Input/Output Terminals*3 Via Optional PN-ZB02 Board
Mounting
Power Supply
Power Consumption
Environmental Operating Temperature
Conditions
Dimensions (W x D x H) (approx.)
Weight (not including PN-ZB02) (approx.)
Packing Dimensions (W x D x H) (approx.)
3
Standard
3
Standard
Operating Humidity
NTSC (3.58 MHz, 4.43 MHz)*
PC analog: Mini D-sub 15-pin x 1*
3.5 mm-diameter mini stereo jack x 1, Video*
RS-232C: D-sub 9-pin x 1, Control Kit jack x 1
PC digital: DVI-D 24-pin (HDCP compatible) x 1, PC analog: BNC x 1,
Video: BNC x 1*
6
, Audio: RCA pin (L/R) x 2
1*
Audio: RCA pin (L/R) x 1, RS-232C: D-sub 9-pin x 1
PC digital: DVI-D 24-pin x 1, External speaker: 10W + 10W (6 Ω)
LAN port (10Base-T/100Base-TX)
VESA (6 points), 200 mm (7
VESA (4 points), 200 mm (7
100V – 240V AC, 50/60 Hz
510W
0°C to 40°C
20% to 80% RH (no condensation)
1,335.9 x 149.3 x 754.2 mm (52
(Display section only, not including protrusions)
44 kg (97 lbs)
1,580 x 381 x 932 mm (62
2
/ PAL / PAL60 / SECAM
4
, HDMI® (1080p compatible) x 1*5,
6
, Component video*6,
6
, S-Video x 1, Component video: BNC (Y, Cb/Pb, Cr/Pr) x
7
/8") pitch, M6 screw or
7
/8") pitch, M6 screw
5
/8" x 5 7/8" x 29 11/16")
1
/4" x 15" x 36 3/4")
Input/Output Terminals
(standard) PN-ZB02 Interface Expansion Board (option)
Audio input
RS-232C output Control kit
jack
PC/AV input
digital RGB
(DVI-D)
PC/AV output
digital RGB
(DVI-D)
External
speakers
Audio
input
PC analog input RGB (BNC)
Video input (BNC)
Other Options
PN-ZR01 : Control Kit
(remote controller and remote
control sensor box)
PN-ZR32 : Long Mirror Frame
PN-ZR33 : Short Mirror Frame
PC/AV
input (HDMI)
PC analog
input RGB
(D-sub)
Audio
output
RS-232C
input
Optional port
LAN port
Component video
input (BNC)
S-Video input
Note: the PN-V602 is intended for use in indoor environments. If the display is installed in a location exposed to excessive direct sunlight such as a window front,
consult your installer to determine if additional measures to reduce ultraviolet and infrared radiation and temperature are required.
Design and specications subject to change without prior notice.
Sharp is a registered trademark of Sharp Corporation. HDMI is a registered trademark of HDMI Licensing LLC. ENERGY STAR is a registered trademark of the U.S. Government.
All other trademarks are the property of their respective owners.
Professional Display Division
Sharp Plaza, Mahwah, NJ 07495-1163
For more info, call 1-866-4-VISUAL (1-866-484-7825)
www.sharpusa.com/monitors
©2011 Sharp Electronics Corporation. All rights reserved. Printed in the U.S.A. 07-29-11 LC-02-385 SIICA 11125