Quick Start Set Up Guide
For information on using the TV’s features, please refer to the operating Instructions.
Quick & easy guide for setting up your TV
What is included in the box
Using the remote control
Setting up the TV for the rst time - including attaching the stand
Connecting other devices to the Television
Need help setting up or using your TV?
Please contact the UK & ROI Helpline*
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: service@umc-uk.co.uk
*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your
phone provider.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
Bank Holidays - 10am to 4pm
Closed Christmas and New Years day
Model Numbers
LC-24DHG6001K
LC-24DFG6001K
Trademark Sharp
Model ID LC-24DHG6001K LC-24DFG6001K
Energy e ciency class A
Visible screen size (diagonal) 60 cm / 23.6 inches
On-mode power consumption 25.0 W 25.0 W
Annual energy consumption *1 37 kWh 37 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1366 (H) x 768 (V) 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4
hours per day for 365 days. The actual energy consumption will depend on how the television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.
LC-24DHG6001K
LC-24DFG6001K
RF 75 ohm Antenna / Analog / DVB
Inputs 2 x HDMI, 2 x USB, 1 x SCART, 1 x Mini Component/YPbPr,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio shared for Composite Video and Component/
YPbPr,
1 x RJ45 LAN/Ethernet
Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker / Ampli er
Watts (RMS)
2 x 5 / 2 x 3
Voltage and power
consumption
AC 220V ~ 240V; 50Hz
25/50W (ecomode/max)
(<0.5W in Standby)
Dimensions including
stand (mm)
560W x 386H x 140D
Net weight (Kgs) 4.3
Wall Mounting VESA 100 x 100 (mm)
SHA/QSG/0079
1 x Stand Installation Pack
(Includes stand base, stand neck & screws)
Accessories
Included with this TV are the following accessories
What is included in the box
Using the remote control
Technical Speci cation
Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.
1 x Operating Instructions
1 x Quick start guide
1 x TV
Operating
Instructions
Quick start
guide
1 x RF cable
1 x Mini composite / AV cable
1 x Mini component / YPbPr cable
1 x Remote Control and 2 x AAA Batteries
7
8
9
0
123
4
5
6
TV
GUIDE
VOL
CH
SOURCE
SOUND
PICTURE
ON/OFF MUTE
TE
X
T
S
U
BT
I
TL
E
IN
F
O
T
V
BAC
K
FA
V
N
E
T
+
G
O
T
O
DVD
SE
TU
P
DVD
M
E
N
U
A-
B
3
D
R
E
P
E
A
T
R
E
C
L
I
S
T
PVR/MEDIA
E
X
I
T
ME
N
U
OK
7
8
9
0
1
2
3
4
5
6
TV
GUIDE
VOL
CH
SOURCE
SOUND
PICTURE
ON/OFF
TEXT
SUBTITLE
INFO
TV
BACK
FAV
APPS
GOTO
A
-B
3D
REPEAT
RE
C
L
IS
T
PVR/MEDIA
EXIT
MENU
OK
Freeview P lay
1
4
2
3
STANDBY - Switch on the TV when in standby or vice versa.
FREEVIEW PLAY - Access the Freeview Play app.
NUMBER BUTTONS - 0–9 to select a TV channel directly.
MUTE - Mute the sound or vice versa.
TV GUIDE - Opens the 7 day TV guide (digital TV mode).
VOL (+/-) - To increase/decrease the sound level.
PICTURE - Scrolls through picture mode options.
SOUND- Scrolls through sound mode options.
SOURCE - To display the input/source menu.
CH (+/-) - To increase or decrease the channel being watched.
MENU - To display OSD menu.
EXIT - To exit all menus.
- Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
BACK - To go back a previous step.
FAV - To display favourites menu.
INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
TEXT - To enter/exit Text.
SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).
TV - To switch to Digital Channels.
YOUTUBE - Access the Youtube App.
NETFLIX - Access the Netfl ix App.
APPS - Access the APPS menu.
RECORD - Access the USB record function.
REC LIST - Opens the list of previously recorded items.
GOTO - To go to a specifi c chapter.
A-B - Press once to set point, press a second time to return to point.
ANGLE/3D - Select different angle of DVD.
REPEAT - To repeat playback.
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
Key
3
2
1
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
For models with 3D functions.
4
1. Languages
Select your preferred on screen display language. This will change the language in
which the menus and associated information is displayed in. When set up has been
completed, this can be changed by selecting Menu > Settings > Language
3. Network setup You can connect the TV to your broadband router or wire-
less network in order to take advantage of the Smart functions. If you connect the
TV to your router using an Ethernet cable (recommended) this step will be skipped.
Follow the on screen prompts to connect to your wireless network. You can set up
the Network connection later in the network menu.
5. TV Installation – Audio.
Depending on how you use / install your TV, select the appropriate setting. The sound
settings on the TV will adjust to suit the type of installation.
6. Default Source
Select the source which you use the most. If Digital TV (Freeview) is chosen, then at
the next step, the set will tune in and default to Digital TV (Freeview). If one of the
other sources is selected, then the set will not tune in at this stage and default to
that input. If it is required to tune the set in later, this can be achieved by selecting
Menu > Channels
4
Connecting your set
First time installation
Button layout
4. Environment of Use
Home Mode: For normal use, by default it is set to a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel).
This can be changed in the picture mode settings.
NOTE: In Home Mode, the TV will switch itself to the standby mode after 4 hours in
the event that the buttons on the remote control or TV set are not used.
Store Mode: For store display use. The picture is adjusted to optimum settings. The
store demonstration will appear on the screen automatically after two minutes.
1 2 3
4 5 6
2. Country Selection
Select the correct fl ag for the country in which the set will be used in. This will enable
the set to correctly install the functions applicable in the country of use.
Stop/Eject DVD
Play/Pause DVD
Volume up and menu right
Volume down and menu left
Programme/Channel up and menu up
Programme/Channel down and menu down
Displays Menu/OSD
Displays the input source menu
Standby Power On/Off
1
2
3
4
5
6
8
7
9
Fitting the stand
1
STANDBY
9
6
8
5
7
4
3
2
1
1. ( g.1) Attach the stand neck to the rear of the TV set using the 3 x M(4x12) screw. ( g.2) Peel o the protective plastic cover then attach the stand base to the stand neck. ( g.3) Secure the base to the neck by using the 4 x ST(4x12) screws provided.
For stand installation, there are two types of screws
provided as shown below. To complete the stand
installation you will require a cross head screw driver.
Place the TV set on a at and clean sur face with the
panel facing downwards to avoid damage.
HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION
When securing the self-tapping screw/s into the base of the stand (on rst
installation) the screw/s will be naturally tight as they create a thread in the
plastic of the stand neck in order to support a TV of this size.
a) Ensure the cross head screw driver tip ts correctly into the head of the
screw and that it is not too big or small.
b) Screw in all screws individually and partially before tightening all of the
screws fully.
c) If they become very tight try loosening them slightly and then re-tightening
them once again as this will continue the process of creating the thread for
the screws.
4 x ST (4x12)
3 x M (4x12)
3 x
M (4x12)
1 1/2
4 x ST (4x12)
1 2
3
Used for attaching the stand neck
to the TV ( g.1)
Used for attaching the stand base
to the stand neck ( g.3)
Installing batteries
2
Sky remote code
If you wish to use your Sky+/HD+ remote to
operate the TV’s basic functions, you will
need a Sky remote control (Revision 9 or
later) and you will need to program it with
the code 2134.
Insert the batteries supplied into the remote control and press the standby button
to power on the TV.
If you wish to use your Sky Q remote to
operate the TV’s basic functions, you will
need to program it with the code 4170.
Setting up the TV set for the rst time
Connectivity
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels,
connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.
3
To receive Freeview channels, in particular Freeview HD
channels, you will need a Digital TV aerial and be in a good
Freeview coverage area. You can check coverage for your
postcode at www.freeview.co.uk.
Please note that any Freeview HD channels found during
tuning will be placed in channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
L
B
J
C
D
E
F
H
K
ETHERNET* Network connection
HDMI 1 (ARC) HDMI input
SCART SCART Input
RF IN RF / TV Aerial Input
Optical Digital Audio Digital Audio output
HDMI 2 HDMI input
2 x USB USB port
Earphone Earphone Input
CI CARD IN Common Interface module
AV IN Audio/Video Input
YPbPr HD input (Ypbpr)
Outdoor Digital
TV Aerial
1.
2.
A
K
J
A
B
C
D
E
F
G
H
i
ARC
ETHERNET
1
SCART
RF IN
OPTICAL
DIGITAL
AUDIO OUT
USB (2.0)
5V
500mA MAX
2
CI CARD IN
YPbPr INAV IN
EARPHONE
G
H
I
J
K
I
UNI - QSG - Sharp - M - SMART models - Foldout 0079.indd 2UNI - QSG - Sharp - M - SMART models - Foldout 0079.indd 2 17/04/2018 12:34:5617/04/2018 12:34:56
Loading...