Sharp LC-24DHG6131KF, LC-24DFG6131KF Quick Start Setup Manual

Quick Start Set Up Guide

For information on using the TV’s features, please refer to the operating Instructions.

Quick & easy guide for setting up your TV

What is included in the box
Using the remote control
Setting up the TV for the  rst time - including attaching the stand
Connecting other devices to the Television

Need help setting up or using your TV?

Please contact the UK & ROI Helpline*
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: [e-mail]

*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your
phone provider.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
Bank Holidays - 10am to 4pm

Closed Christmas and New Years day

Model Numbers

LC-24DHG6131KF

LC-24DFG6131KF

Trademark Sharp

Model ID LC-24DHG6131KF LC-24DFG6131KF

Energy e ciency class A

Visible screen size (diagonal) 60 cm / 23.6 inches

On-mode power consumption 25.0 W 25.0 W

Annual energy consumption *1 37 kWh 37 kWh

Standby power consumption *2 <0.50 W

O mode power consumption n/a

Screen resolution 1366 (H) x 768 (V) 1920 (H) x 1080 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4
hours per day for 365 days. The actual energy consumption will depend on how the television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.

LC-24DHG6131KF
LC-24DFG6131KF

RF 75 ohm Antenna / Analog / DVB

Inputs 2 x HDMI, 2 x USB, 1 x SCART, 1 x Mini Component/YPbPr,

1 x Mini AV IN - Composite Video/CVBS and L/R Audio shared for Composite Video and Component/

YPbPr,

1 x RJ45 LAN/Ethernet

Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone

Speaker / Ampli er
Watts (RMS)

2 x 5 / 2 x 3

Voltage and power
consumption

AC 220V ~ 240V; 50Hz

25/50W (ecomode/max)

(<0.5W in Standby)

Dimensions including
stand (mm)

554W x 355H x 142D

Net weight (Kgs) 3.7

Wall Mounting VESA 100 x 100 (mm)

1 x Stand installation pack

4 x

1 x L (left)

1 x R (right)

SHA/QSW/0023

Win a

Soundbar

Register your manufacturers guarantee online within 14 days of purchase at

www.registertoday.co.uk/sharp and enter into a prize draw to

Terms and conditions apply. Online registration only.

and enter into a prize draw to

ly.

Accessories

Included with this TV are the following accessories

What is included in the box

Technical Speci cation

Please save your box/packaging as you will need this in the event of warranty/service repair or support.

We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to

package your item in the event of warranty/service repair is in it’s original box/packaging.

1 x Operating Instructions

1 x Quick start guide

1 x TV

1 x RF cable

1 x Mini composite / AV cable

1 x Mini component / YPbPr cable

1 x Remote Control and 2 x AAA Batteries

Buttons to use when

pairing the remote

control to the TV.

REMOTE CONTROL

FREEVIEW PLAY - Switch on the TV when in standby or vice versa.

NETFLIX - Access the Netfl ix application.

STANDBY - Switch on the TV when in standby or vice versa.

NUMBER BUTTONS - 0–9 to select a TV channel directly.

MUTE - Mute the sound or vice versa.

TV GUIDE - Opens the 7 day TV guide (digital TV mode).

YOUTUBE - Access the Youtube App.

APPS - Access the APPS menu.

SOURCE

- To display the input/source menu.

TV

- Switches to the Digital TV source.

VOL (+/-) - To increase/decrease the sound level.

FAV - To display favourites menu.

INFO - Press once for now/next channel information.

- Press twice for information about the current programme.

CH (+/-) - To increase or decrease the channel being watched.

SUBTITLE

- To switch the dialogue at the bottom of the

screen (on/off).

TEXT

- To enter/exit Text.

MENU - To display OSD menu.

BACK - To go back a previous step.

EXIT - To exit all menus.

- Allows you to navigate the on-screen menus and

adjust the system settings to your preference. When there is no menu

displayed on the screen, you will be able to adjust the picture/sound

settings on the TV, use the

button to change the picture settings and

the

button to change the sound settings.

RECORD/DVD MENU - Access the USB record function/Access the

DVD menu of the DVD inserted (must be set to the DVD source).

REC LIST/DVD SETUP - Opens the list of previously recorded items/Access

the TV’s DVD setup menu (must be set to the DVD source).

GOTO - To go to a specifi c chapter.

A-B - Press once to set point, press a second time to return to point.

ANGLE - Select an alternative camera angle during playback of the DVD.

REPEAT - To repeat playback.

Key

3

4

2

1

For models with integrated DVD players.

For models with PVR Function.

For models with USB Playback.

For models with 3D functions.

5

- To play in fast rewind mode

- To play in fast forward mode

- To play/pause

- To restart the current chapter

- To advance forward to the next chapter

- To stop the playback/Eject Disc

(To EJECT the disc press/hold the button for 4 seconds)

213

546

APPs

879

0

FAV

INFO

MENU

OK

EXIT

REC

DVD MENU

GOTO A-B ANGLE

REPEAT

DVD SETUP

REC

LIST

BACK

TV

GUIDE

VOL

CH

TV

Freeview Pla y

1

5

3

4

2

1

Pairing the remote control

1) If the TV turns on automatically and the first time installation screen appears but the TV

does not react to the remote control, it will need to be paired with the set. To achieve this,

press and hold the centre two coloured buttons at the bottom of the remote control for a few

seconds. The power light will then blink 5 times to confirm the TV and remote control are

paired.

2) If the TV does not automatically turn on, use the standby button on the set (not the remote

control).

Once on, press the standby button on the TV set once. This will prompt the ‘pairing menu’ to

appear, scroll through and highlight ‘Pair your remote’ by pressing the CH+ or CH- TV buttons

to scroll up or down. Then press the TV set’s standby button to confirm your selection. Now

press and hold the centre two coloured buttons at the bottom of the remote control for a few

seconds to pair with the set. The power light will blink 5 times to confirm the TV and remote

control are paired.

1. Languages

Select your preferred on screen display language. This will change the language in
which the menus and associated information is displayed in. When set up has been
completed, this can be changed by selecting Menu > Settings > Language

3. Network setup You can connect the TV to your broadband router or wire-

less network in order to take advantage of the Smart functions. If you connect the
TV to your router using an Ethernet cable (recommended) this step will be skipped.
Follow the on screen prompts to connect to your wireless network. You can set up
the Network connection later in the network menu.

5. TV Installation – Audio.

Depending on how you use / install your TV, select the appropriate setting. The sound
settings on the TV will adjust to suit the type of installation.

6. Default Source

Select the source which you use the most. If Digital TV (Freeview) is chosen, then at
the next step, the set will tune in and default to Digital TV (Freeview). If one of the
other sources is selected, then the set will not tune in at this stage and default to
that input. If it is required to tune the set in later, this can be achieved by selecting
Menu > Channels

4

Installing batteries

Connecting your set

First time installation

Button layout

4. Environment of Use

Home Mode: For normal use, by default it is set to a power saving mode which re­duces the energy used by up to 25% (by reducing the power to the LED/LCD panel).
This can be changed in the picture mode settings.

NOTE: In Home Mode, the TV will switch itself to the standby mode after 4 hours in
the event that the buttons on the remote control or TV set are not used.

Store Mode: For store display use. The picture is adjusted to optimum settings. The
store demonstration will appear on the screen automatically after two minutes.

1 2 3

4 5 6

2. Country Selection

Select the correct fl ag for the country in which the set will be used in. This will enable
the set to correctly install the functions applicable in the country of use.

Stop/Eject DVD

Play/Pause DVD

Volume up and menu right

Volume down and menu left

Programme/Channel up and menu up

Programme/Channel down and menu down

Displays Menu/OSD

Displays the input source menu

Standby Power On/Off

1

2

3

4

5

6

8

7

9

STANDBY

9

6

8

5

7

4

3

2

1

Fitting the stand

For stand feet installation, there is one type of screw
provided as shown below.
To complete the stand installation you will require a
cross head screw driver.
Place the TV set on a fl at and clean surface with the
panel facing downwards to avoid damage.

L

R

1

1

4 x

3
4

1

2

L

R

2

Used for attaching the stand
to the TV set ( g.2)

4 x

TV panel must be facing downwards.

Place the TV set on a fl at and clean surface with the panel facing
downwards to avoid damage, then fi x the stand feet shown.

The feet are marked L (left) and R (right).

Secure the stand feet to the underside of the TV
set using the 4 screws provided.

Register your manufacturers

guarantee online within

14 days of purchase at

www.registertoday.co.uk/sharp

and enter into a prize draw to

win a Sharp Soundbar

guarantee online within

14 days of purchase at

www.registertoday.co.uk/sharp

and

enter into a prize draw t

o

w

in a Sharp Soundba

r

Terms and conditions apply. Online registration only.

Setting up the TV set for the  rst time

Connectivity

Insert the batteries supplied into the remote control. The remote control should
automatically be paired with the TV set. If this is not the case, please refer to the
‘Pairing the remote control’ section of this Quick Start Guide.

1) Connect the TV to your power socket.

2) If you wish to use the TV to receive Freeview/Saorview channels,
connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.

3

2

To receive Freeview channels, in particular Freeview HD channels, you will need a
Digital TV aerial and be in a good Freeview coverage area. You can check coverage for
your postcode at www.freeview.co.uk.

Please note that any Freeview HD channels found during tuning will be placed in
channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

* The Ethernet/LAN port is used for Freeview HD services and smart functions.

L

B

J

C

D

E

F

H

K

ETHERNET* Network connection

HDMI 1 (ARC) HDMI input

SCART SCART Input

RF IN RF / TV Aerial Input

Optical Digital Audio Digital Audio output

HDMI 2 HDMI input

2 x USB USB port

Earphone Earphone Input

CI CARD IN Common Interface module

AV IN Audio/Video Input

YPbPr HD input (Ypbpr)

Outdoor Digital
TV Aerial

1.

2.

A

K

J

A

B

C

D

E

F

G

H

i

ARC

ETHERNET

1

SCART

RF IN

OPTICAL

DIGITAL
AUDIO OUT

USB (2.0)

5V

500mA MAX

2

CI CARD IN

YPbPr INAV IN

EARPHONE

G

H

I

J

K

I

REC

DVD MENU

GOTO A-B ANGLE

REPEAT

DVD SETUP

REC
LIST

LC-24DHG6131KF SHA-QSW-0023.indd 2LC-24DHG6131KF SHA-QSW-0023.indd 2 29/05/2018 09:31:5229/05/2018 09:31:52