Sharp HT-SL70, HT-SL75 User Manual

ENGLISH

S O

UND

B A R

H OME

THE

TER

S Y S

T E M

H T

L75

(14 - 17/32

369 mm

S OU

D B AR H

OME

THEA

TER

S Y S TE

M H

S L

(23 - 3/8

594 mm

S O

U ND

B A

THEA

Y S

TEM

(2 - 5/32 )

55 mm

S OU

D B

H OME

T HE

TER

S YS

T E M

L 70

(7 - 13/32

188 mm

(6 - 3/32 )"

155 mm

(6 - 15/16 ")

176 mm

TINSZB037AWZZ

Printed in Malaysia

11K R MW 1

HT-SL70 / HT-SL75

Quick Start Guide

This product has HDMI CEC (Consumer Electronics Control), a feature which will enable you to use your TV’s remote control to power on/off and adjust the volume of this product.

Recommended Connection:

Your TV Type HDMI CEC function Connection

HDMI

(with Audio Return

Channel)

MUST BE ENABLED

with HDMI HDMI IN Method 2 Page 8, Method 2

HDMI TV without

CEC & ARC or non

NONE

HDMI TV

Notes:

 This product is controlled via HDMI CEC (Consumer Electronics Control) speciﬁ cation, therefore for HDMI

connection, your TV’s CEC must be enabled. For details, refer to the operation manual of the TV.

 For TV without HDMI CEC, headphone or RCA (variable output) analogue connection is available.  For TV without HDMI, headphone or RCA (variable output) connection is required.

 Volume level can be controlled via TV remote control.

Accessories

HDMI IN (ARC) Method 1 Page 8, Method 1

HEADPHONE OUT Method 3 Page 9, Method 1

(VARIABLE OUT)

SOUND BAR HOME THEATER SYSTEM

Quick Start Guide

RCA

Connection method

Method 3 Page 9, Method 2

refer operation

Connection

method

manual

Accessories

Wall Mount

Angle x 2

For HT-SL75 only.

Sound bar cover joint for

60" (152 cm) TV (short) x 1

For HT-SL70 only.

Pattern Paper Speaker Wire

Sound bar cover joint for

70" (177 cm) TV (long) x 1

Sound Bar Stand x 2

(10 - 2/16")257 mm

Screw for Brackets x 6

(13 - 7/32")336 mm

Stand Cover x 2 Stand Base x 2

Sound Bar Stand

Cushion x 2

The following accessories are included. This product has no remote control.

RCA to Headphone

Cable (1 pin - 2 pins) x 1

Subwoofer Stand x 2 Audio Cable x 1 HDMI Cable x 1 Wall Mount Bracket x 2

System connections

Method 1. Recommended connection : Connecting a TV with ARC (Audio Return Channel)

DVD or similar device

HDMI OUTPUT

HDMI INPUT

HDMI (ARC)

Wall socket

(AC 220-240V ~ 50/60 Hz)

Subwoofer

Right Left

Sound bar cover joint for

46" (117 cm) TV (short) x 1

Sound bar cover joint for

52" (132 cm) TV (long) x 1

Stand Cover x 2 Stand Base x 2

The illustrations printed in this operation manual are for the model HT-SL70.

Sound Bar

White

Make sure to unplug the AC power lead before making any connections.

 This unit can be operated (power on/off or volume up/down) via a TV or similar

component which supports HDMI CEC (Consumer Electronics Control). If this does not work, it does not mean this system is faulty. Refer to the operation

Red

manual of the respective component on how to activate the CEC.

Example for your TV setting

1. Activation of CEC (e.g.: AQUOS TV (LC40LE810E))

1 Go to the MENU of the TV and the MENU screen will be displayed. 2 Press b/B (or v/V) to select “Link Operation”. 3 Press V/v (or b/B) to select “AQUOS LINK Setup”.

(For Sharp LCD TV, the HDMI CEC is named as AQUOS LINK)

4 Press v/V (or b/B) to select “AQUOS LINK Control”. 5 Press v/V (or b/B) to select “On”. 6 Press MENU to exit.

Method 2. Connecting a TV without ARC (Audio Return Channel)

Subwoofer

DVD or similar device

To HDMI terminal

To audio output terminal

HDMI OUTPUT

To HEADPHONE terminal

 Activate the CEC feature of your TV and select the appropriate speaker output. For details, refer

to the operation manual of the TV.

To turn the power on

Plug the AC power lead into a wall socket, the stand-by indicator turns RED. This unit will automatically power on if:

1. DVD which supports HDMI CEC, is turned on.

2. Audio signal is detected from TV (DVD must POWER OFF). The stand-by indicator will turn BLUE if TV signal is detected.

Power Off

This unit will automatically go to stand-by mode (indicator turns RED) if:

1. DVD which supports HDMI CEC, is turned off.

2. No signal from TV is detected after 20 minutes.

2. Selection of speaker

Listening with the Sound Bar System

1 Select OPTION and the AQUOS LINK menu screen will be displayed. 2 Press v/V to select “By AQUOS AUDIO SP”, and then press OK.

To turn the power on/off

Plug the AC power lead into a wall socket, the stand-by indicator turns RED. This unit will automatically power on/off if TV is turned on/off. The stand-by indicator will turn BLUE if TV signal is detected.

Method 3. Connecting a TV (with AUDIO IN (TV))

Subwoofer

DVD or similar device

To audio output terminal

To HEADPHONE terminal

 Select the appropriate speaker output on your TV. For details, refer to the operation manual of

the TV.

To turn the power on

Plug the AC power lead into a wall socket, the stand-by indicator turns RED. This unit will automatically power on if audio signal is detected from TV. The stand-by indicator will turn BLUE if TV signal is detected.

Power Off

This unit will automatically go to stand-by mode (indicator turns RED) if no signal from TV is detected after 20 minutes.

Note:

In some cases, a small background noise could emit from the sound bar, when you use the headphone connection with a TV-Set. In such case, please change the connection to the HDMI/ARC or RCA-connection! This effect depends on the used TV-Brand, model and age, and it is not a quality matter from the sound bar!