Sharp HRO00246 User Manual

Draft

S1

INSTRUCTION MANUAL

’ 16.●

Package Contents

1

Package Contents



Package Contents

 Handset (S1)

・Battery is built into handset.
・Handset back cover is not removable.

 Warranty

Charging Handset

Battery is built into handset.

Internal Battery



About Charging



AC Charger



Charging by PC



Internal Battery

A lithium-ion battery is built into handset; it is not removable.

Recycling

This product requires a lithium-ion battery. Lithium-ion batteries are recyclable. To

recycle a used lithium-ion battery, take it to any shop displaying the recycling symbol.

Battery Cautions

Battery Care

To help maintain performance and life of Internal Battery, do not store in the following

conditions (battery level should be at approximately 40% for optimal storage).

 Full (immediately after charging is complete)

 Exhausted (too low to power on handset)

2

Bulges of Internal Battery

Charging Option

Description

AC Charger

Connect handset and AC Charger (optional

accessory) directly.

USB charging

Connect handset and a PC with Micro USB

Cable (optional accessory).

Depending on usage, bulges may appear near end of battery life; this does not affect

safety.

Internal Battery Replacement

Internal Battery is a consumable item; may need to be replaced if operating time

shortens noticeably. Internal Battery is not user replaceable; its replacement incurs

fees and requires handset submission to a Y! Mobile Shop or other appropriate

servicer. For details, contact a Y! Mobile Shop or Y! Mobile Customer Support, General

Information.

About Charging

The following charging options are available.

Charging/Notification Lamp

Charging/Notification Lamp illuminates red while charging; illuminates green when

charge is almost full.

Charging/Notification Lamp goes out when charge is full.

 If Charging/Notification Lamp is blinking, charging is not working properly. Make sure

that you are using Charger and products specified by Y! Mobile Corp. If you are using

specified products only, contact a Y! Mobile Shop or Y! Mobile Customer Support,

General Information.

Charging Cautions

Water Resistance

AC Charger (optional accessory) and Micro USB Cable (optional accessory) are not

waterproof. Never connect Micro USB plug while handset or Charger is wet.

Handset is water resistant; however, if Micro USB plug is inserted while it is wet, liquid

(tap water, beverage, sea water, pet urine, etc.) or a foreign object adhered to handset

or Micro USB plug may cause overheating, burnout, fire, malfunction, burns, etc. due to

electric shock, short-circuiting, etc.

Handling Cables

Do not pull, bend, or twist cable; may damage the cable.

3

About Charging Abroad

Y! Mobile Corp. is not liable for problems resulting from charging handset abroad.

AC Charger

AC Charger is an optional accessory. Be sure to use SB-AC12-HDQC (SoftBank SELECTION

Qualcomm® Quick ChargeTM 2.0 AC Adaptor for smartphones) or SB-AC13-HDMU (Micro USB, 1.0

A) specified by SoftBank Corp.

For information on other peripheral devices, see SoftBank Website.

The following explains how to charge handset using SB-AC12-HDQC (SoftBank

SELECTION Qualcomm® Quick ChargeTM 2.0 AC Adaptor for smartphones).

 See User Guide for corresponding AC Charger.

 Never connect Micro USB plug while handset or AC Charger is wet.

Insert Micro USB plug of AC Charger into External Device Port

4

 Insert Micro USB plug in correct orientation; otherwise, External Device Port may be damaged.

Check contours and orientation of Micro USB plug, then insert it with tabs (○) facing down.

Extend blades and plug AC Charger into AC outlet

Charging starts and Charging/Notification Lamp illuminates.

 Charging/Notification Lamp goes out when charge is full.

After charging, remove Micro USB plug from External Device Port, then unplug AC
Charger and retract blades

Charging by PC

Connect handset to a PC with Micro USB Cable (SHDDL1; optional accessory).

 Make sure that PC is turned on.

 Charging may not be possible/take a long time depending on connection and PC conditions.

 Never connect Micro USB plug while handset or Micro USB Cable is wet.

Insert Micro USB plug of Micro USB Cable into External Device Port

5

 Insert Micro USB plug in correct orientation; otherwise, External Device Port may be damaged.

6

Check contours and orientation of Micro USB plug, then insert it with tabs (○) facing down.

Insert USB plug of Micro USB Cable into PC USB port

Charging starts and Charging/Notification Lamp illuminates.

 Charging/Notification Lamp goes out when charge is full.

After charging, remove Micro USB Cable from handset and PC

Specifications

Item

Description

Dimensions (W x H x D)

Weight

Maximum Output

3G: 0.25 W

GSM (850 MHz, 900 MHz): 2 W

GSM (1800 MHz, 1900 MHz): 1 W

4G: 0.2 W

Internal Battery Capacity

Continuous Talk Time1

Continuous Standby Time2

7

Handset



Materials



Handset

Handset specifications are as follows.

 Times in the table vary with location, status, settings, etc.

 Display employs precision technology; however, some pixels may remain on/off.

Approx. ＊＊ mm x ＊＊＊ mm x ＊.＊ mm

Charging Time4

(without protruding parts)
Approx. ＊＊＊ g

2,400 mAh
3G: Approx. ＊＊＊ minutes
GSM: Approx. ＊＊＊ minutes
VoLTE: Approx. ＊＊＊minutes

3G: Approx. ＊＊＊ hours
GSM: Approx. ＊＊＊ hours
4G (AXGP Network): Approx. ＊＊＊ hours
4G (FDD-LTE Network): Approx. ＊＊＊ hours

AC Charger (SB-AC12-HDQC)5: Approx. ＊＊＊

minutes

AC Charger (SB-AC13-HDMU; Micro USB, 1.0
A): Approx. ＊＊＊ minutes

Maximum Transmission Speed6 SoftBank 4G: 165 Mbps in downlink, 10 Mbps in

uplink

SoftBank 4G LTE: 187.5 Mbps7 in downlink, 37.5

Mbps in uplink

1 Average measured with handset fully charged, in strong signal conditions at rest.

Parts

Materials Used/Surface Finish

Display

Tempered glass

Shatterproof Film

Polyester/AF coating

Periphery of Display

Aluminum/anodizing

8

2 Average measured with handset fully charged, without calls or operations, in strong signal

conditions at rest, and with data communication and Urgent News disabled. May vary with battery

strength, ambient temperature, settings, etc.

3 Calculated in full-screen landscape mode, with Brightness level set to medium, with Earphones

with Mic (optional accessory), and volume at maximum, starting from handset fully-charged and

continuing until 10% remaining battery charge.

Usable time may vary with radio signal conditions and the content played.

4 Measured with power off using AC Charger.

5 SB-AC12-HDQC (SoftBank SELECTION Qualcomm® Quick ChargeTM 2.0 AC Adaptor for

smartphones)

6 Provided on a best-effort basis; transmission speed may decrease or transmission may become

unavailable due to traffic conditions, network environment, etc. In addition, transmission speed

varies by area.

7 Scheduled to be available on an area-by-area basis. Depending on area, maximum downlink

speed is set to 150 Mbps, 112.5 Mbps, 75 Mbps, or 37.5 Mbps or less.

Materials

Cabinet for Black PC resin/coating, UV top coating

Cabinet for Pink, White and Turquoise PC resin/indium deposition, UV top coating

Periphery of Back Surface PA resin + GF/UV top coating

9

Power Key Aluminum/anodizing

Volume Up/Down Key Aluminum/anodizing

Receiver Screen SUS/electrophoretic coating

Camera Window Tempered glass/AF coating

USIM/Micro SD Card Slot Tray PC resin + TPU/UV top coating

Card Slot Tray Gasket Silicone

IMEI Tray PET

Speaker Screen Nylon resin/water-repellent treatment

External Device Port SUS/tin plating

Warranty & After-Sales Service

10

Warranty



After-Sales Service



Warranty

Handset purchase includes warranty.

 Check shop name and purchase date.

 Read warranty and keep in a safe place.

 Warranty period is given in warranty.

Cautions

Damages

Y! Mobile Corp. is not responsible for any damages for user or third party resulting

from lost opportunities to make a call, etc. due to breakage, malfunction, or trouble of

product.

Malfunction/Repairs

Information/settings on handset may be lost/changed due to malfunction or repairs. It is

recommended that you keep a copy of Address Book contacts and other important

information. Y! Mobile Corp. is not responsible for loss/change of data (contacts,

images, sound, etc.) or settings due to malfunction, repairs, change of model, or any

other handling.

Disassembly/Modification

Disassembly/modification of handset is prohibited under the Radio Law. Note that

handset cannot be accepted for repairs if modified.

Adhering stickers, etc. on Display or Keys or adhering decorations with glue, etc. may

be deemed to be modifications, and prevent acceptance of handset for repairs.

After-Sales Service

To request repairs, contact Customer Service or a nearby Y! Mobile Shop. Have details

of symptoms ready.

 During the warranty period, repairs are made under the terms and conditions of the warranty.

 After the warranty period, if handset can be repaired, repairs will be made at cost.

11

Further inquiries

For more information on after-sales service, contact a nearby Y! Mobile Shop
or Customer Service.

Customer Service

12

For Y! Mobile handset or service information, call General Information. For repairs,

call Customer Assistance.

Y! Mobile Customer Support



Smartphone Technical Support Center



Y! Mobile Global Call Center



Y! Mobile Customer Support

General Information

From a Y! Mobile handset, dial toll free at 151
From a landline/IP phone, dial toll free at 0570-039-151

Customer Assistance (Repairs/Lost Handsets)

From a Y! Mobile handset, dial toll free at 116

From a landline/IP phone, dial toll free at 0570-039-151

Smartphone Technical Support Center

From a Y! Mobile handset, dial toll free at 151

From a landline/IP phone, dial toll free at 0570-039-151

Y! Mobile Global Call Center

From outside Japan, dial [phone]

If handset is lost/stolen, call this number immediately (international charges apply)

13

Safety Precautions

Label

Description

Great risk of death or serious injury

Risk of death or serious injury

Risk of minor injury or damage to property

Symbol

Description

Prohibited actions

Disassembly prohibited

Exposure to liquids prohibited

14

Read Safety Precautions before using handset.

Observe precautions to avoid injury to self or others, or damage to property.

Y! Mobile Corp. is not liable for any damages resulting from use of this product.

Safety Precautions



Handset, USIM Card, Charger (Optional Accessory), Micro USB Cable (Optional



Accessory), SD Card (Optional Accessory) (Common)

Internal Battery



Handset



Charger (Optional Accessory)



Handset Use & Electronic Medical Equipment



Safety Precautions

These labels show degree of risk from improper use; learn them before reading on:

These symbols signify prohibited/compulsory actions; learn them before reading on:

Use with wet hands prohibited

Compulsory actions

Unplug from outlet

Handset, USIM Card, Charger (Optional Accessory),

15

Micro USB Cable (Optional Accessory), SD Card

(Optional Accessory) (Common)

Use specified Charger and Micro USB Cable only.

Non-specified equipment use may cause Internal Battery to leak, overheat, burst or ignite, and may

cause Charger to overheat, ignite, malfunction, etc.

Do not disassemble, modify or solder handset or related hardware.

May cause fire, injury, electric shock or malfunction. Internal Battery may leak, overheat, burst, ignite,

etc.

Modifying handsets is prohibited by the Radio Law and subject to penalty.

Do not wet internal handset parts or Charger.

If liquid (water, pet urine, etc.) enters handset, leaving wet or charging while wet may cause

overheating, electric shock, fire, injury, malfunction, etc.

Use only as directed.

Do not charge, use, or leave handset or related hardware in extreme heat (fire, heat sources,

direct sunlight, inside vehicles in the hot sun, etc.).

Do not charge, leave, use, or be carrying handset or related hardware in a warm place or where

heat collects, such as under a kotatsu (blanketed warming table) or electric blanket, next to a

16

kairo (worn warming patch), etc.

May cause warping/malfunction; Internal Battery may leak, overheat, ignite or burst. Handset or

related hardware may become hot to the touch, leading to burns or other problems.

Do not force Charger into handset.

Check Micro USB plug orientation; retry.

Internal Battery may leak, overheat, burst, ignite, etc. May damage or burn out External Device Port.

When handset is connected to Charger, do not apply excessive force by stomping or in any

other way.

When Port or connector is damaged, charging may cause malfunction or fire. Charge as directed.

Do not place handset or Charger in/on ovens, microwave ovens, pressure cookers, induction

stoves or other cooking appliances.

Internal Battery may leak, overheat, burst or ignite. Handset/Charger may overheat, emit smoke, ignite,

malfunction, etc.

Keep handset off and Charger disconnected near gas stations or places with fire/explosion

risk.

May ignite gas. Turn off any NFC (including Osaifu-Keitai®) compatible mobile phone when using gas

station facilities (If NFC (including Osaifu-Keitai®) is locked, unlock before turning mobile phone off).

Do not drop/throw or subject to strong impact.

Internal Battery may leak, overheat, burst or ignite, resulting in fire, electric shock, malfunction, etc.

If you notice unusual sound/odor, smoke or any other abnormality, follow these steps.

1. Grasp plug and disconnect Charger.