Sharp HRO00243 User Manual

BasicManual

CellphoneandPHSoperatorscollectandrecycleunused
telephones,batteriesandbatterychargersatstoresbearing
thelogoregardlessofbrandandmanufacturertoprotect
theenvironmentandreusevaluableresources.

濡れた状態での充電は、
異常な発熱・焼損などの
原因となり大変危険です。

CustomerServiceCenter

Forinquiries,call:

Forgeneralinformation,charges,andoperationassistance

(tollfree)

Fromfixed-linephones: Fromaucellphones:

areacodenotrequired

areacodenotrequired

Fromfixed-linephones: Fromaucellphones:

Incaseabovenumbersarenotavailable,calltoll-free:

0120-977-033

(exceptOkinawa)

0120-977-699(Okinawa)

Forservicecancelationprocedureincaseoflossortheft

(tollfree)

onyouraucellphone.

KeitaiGuaranteeServiceCenter

Forloss,theftordamage(tollfree)

Fromfixed-linephones/aucellphones:

Businesshours:9:00to20:00(7daysaweek)

Businesshours:9:00to20:00(7daysaweek)

Businesshours:24hours(7daysaweek)

0120-925-919

• The company names and product names appearing in this manual are

trademarks or registered trademarks of their respective holders.

• For exemptions, refer to “Notes on Usage” available on the au homepage.

October2016,1stEdition
Soldby:KDDICORPORATION,

OKINAWACELLULARTELEPHONECOMPANY

Manufacturedby:SHARPCORPORATION

分

Preface

分

Thank you for buying the “AQUOS U SHV37” (simply called the “SHV37” or the
“product” from here on).
Before using the product, be sure to read the “Basic Manual” (this manual) and
“Notes on Usage”/“Setting Guide” available on the au homepage to ensure
correct use. After you have finished reading the manuals, be sure to keep them
accessible and store the printed manuals (“取扱説明書” (Basic Manual), “ご利
用にあたっての注意事項” (Notes on Usage) and “設定ガイド” (Setting Guide))
(Accessories) in safe places so that you can refer to them whenever you need
them.

List of Packaged Items

Before you start using the product, make sure that you have all the following
packaged items with the product.

SHV37

• 取扱説明書 (Basic Manual) (Japanese)

• ご利用にあたっての注意事項 (Notes on Usage) (Japanese)

• 設定ガイド (Setting Guide) (Japanese)

The following items are not included in the package.

• microSD memory card

• AC adapter

• Purchase a specified charger (sold separately).

◎ The battery is built into the product.
◎ Illustrations of cell phones in this manual are only for reference. They may

look different from the actual product.

• Earphone

• microUSB cable

Instruction Manual

■ “Basic Manual” and “Setting Guide”

The “Basic Manual” (this manual) and “Setting Guide” available on the au
homepage describe basic operations of major functions.

■ “Instruction Manual Application” (Japanese/English

Version)

You can use the “Instruction Manual application” (Japanese version) on the
product to check detailed operational procedures.
Also, you can activate intended functions from an explanation screen
depending on the functions.

On the home screen, “Apps Sheet” [[取扱説明書] (Instruction Manual).

Also, you can use the “Instruction Manual application” (English version) on the
product to check operational procedures.

On the home screen, “Apps Sheet” [[Basic Manual] after switching the
display language to English (zP.11).

• To use the application for the first time, you need to download and install it by

following on-screen instructions.

■ “Full Instruction Manual” (Japanese)

You can check “取扱説明書詳細版” (Full Instruction Manual) (Japanese) that
describes detailed of various functions on the au homepage.

(http://www.au.kddi.com/support/mobile/guide/manual/)

1

Illustrations and Descriptions in This

分

Manual

■ Note on Key Illustrations

In this manual, the key illustrations are simplified as shown below.

■ Description of Operations for Selecting Item/Icon/Key

etc.

In this manual, operation procedures are described as below.

Description Explanation

On the home screen,
“Apps Sheet” [[Phone]

[Enter “141”
[[CALL].

f (hold down for at
least 2 seconds).

* Tapping is to select a key or icon display ed on the screen by lightly tapping it with

your finger.

■ Notes on Illustrations/Screenshots

Screenshots and operations in this maul are based on attaching an au Nano IC
Card 04 to the product.
Illustrations and screenshots may differ from actual screen. Portions of the
screen are sometimes omitted.

In this manual, part of the
screen such as icons are
omitted.

Slide/flick the Feel Home screen to switch to the
Apps Sheet, and then tap “ Phone”. Continue
by tapping “ ”, “ ”, and “ ”, and
finally “ ”.
Hold f down for at least 2 seconds.

Actual screen

◎ Explanations of this manual are based on the case when the color of the

main unit is “Lime×Gold” as an example.

◎ Explanations of this manual are based on the case when the product is

held vertically. If you hold it horizontally, menu items/icons/on-screen
keys etc. may be different.

◎ Descriptions in this manual are based on operation in Feel Home.

Operations may be different if home applications have been changed (by
using “Home applications”, etc.).

◎ Menu items, layers and icons described in this manual may be different

according to functions being used and conditions.

◎ In this manual, “m icroSD™ memory card (commercially available)”,

“microSDHC
memory card (commercially available)” are abbreviated as “microSD
memory card” or “microSD”.

◎ All of the indicated amounts exclude tax unless otherwise specified.

™

memory card (commercially available)” and “microSDXC™

In this manual

2

◎ The company names and product names appearing in this manual are

分

trademarks or registered trademarks of their respective holders. Also, ™
and ® marks are sometimes omitted.

Cell Phone Etiquette

■ Use of cell phones is not allowed in the following

places!

• Do not listen to music or watch videos while driving a car or riding a

motorbike or bicycle. Use of a cell phone while driving a car or riding a
motorbike is prohibited by law. (Use of a cell phone while riding a bicycle
may be punishable by some regulations.) Be attentive to traffic around you
while walking. Not being able to hear surroundings or looking only at the
display may cause a traffic accident. Be careful especially at train crossings,
on station platforms, and at crosswalks.

• Since using the product on airplanes is restricted, follow the instructions

given by the respective airlines.

■ Be considerate of people around you

• Do not make calls in theaters, museums, libraries, and other similar places.

Turn power off or turn on manner mode so as not to disturb others around
you with your ringtones.

• Do not use the cell phone outside in town where you might hinder other

pedestrians.

• Viewing a cell phone screen while walking is a serious hazard. Do not

suddenly stop to talk on/operate the cell phone or do so while walking.

• Move to areas where you will not inconvenience others on bullet trains, in

hotel lobbies, etc.

• Refrain from talking in a loud voice.

• Check whether sound from earphones, etc. is audible when near others on a

train.

• Obtain the permission of other people before you take their photos with the

cell phone's camera.

• Keep general morals when you use the camera function.

• Some people close to you in crowded places such as packed trains may be

using a cardiac pacemaker. Turn on “Airplane mode” or turn the cell phone
off in such places.

• Abide by the rules of hospitals and other medical institutions where it is

forbidden to use or carry cell phones.

Names and Functions of Parts

■ Front/Left Side/Right Side

A au Nano IC Card 04/microSD memory card cover
B IMEI tra y

Allows you to confirm the product's IMEI.

C au Nano IC Card 04 tray slot
D microSD memory card slot
E In camera lens
F Earpiece (Receiver)/Speaker
G Proximity sensor/Light sensor

Proximity sensor prevents inadvertent operations of the touch panel during
a call.
Light sensor detects the ambient brightness and adjusts the brightness of
display.

3

H ud Volume up/down key

分

Adjust the volume.
Hold down d on the lock screen to set/disable the manner mode.

I f Power key

Turn the screen on/off.
Hold it down to turn on/off the power, restart the product, etc.

J Strap eyelet
K Display (Touch panel)

The display surface is covered by the protective film. Remove it when you
use the commercially available one.

L Charging/Incoming indicator

When you purchase the product, the brightness of the indicator is
automatically suppressed while sleeping (from 23:00 to 6:30).

■ Back/Top and Bottom

M Internal antenna
N Mobile light
O Out camera lens
P GPS antenna

®

/Bluetooth® antennas

Q Wi-Fi
R & mark

Hold it over a reader/writer when using Osaifu-Keitai

S Earphone/Microphone jack
T Mouthpiece (Microphone)
U External connection jack

Use when connecting the common AC adapter 05 (sold separately), the
microUSB cable 01 (sold separately), USB cable for peripherals
(commercially available), etc. to the product.
When you connect the common AC adapter 05 (sold separately), the
microUSB cable 01 (sold separately), etc. to the product, some applications
may not function properly since the geomagnetic sensor is affected by the
magnetism of connected devices. Use the product after removing the
cable.

◎ The back cover of the product cannot be removed. Removing it forcibly

may cause damage or a fault.

◎ The battery is built into the product, and cannot be removed by the

customer. To force the power off, refer to “Turning the Power Off Forcibly”
(zP. 9).

au Nano IC Card 04/microSD memory card cover

◎ Note that pulling or applying excessive force on an au Nano IC Card 04/

microSD memory card cover may cause damage.

IMEI tray

◎ An IMEI (international mobile station equipment identity) is a special

identification code assigned to each phone. You can pull the IMEI tray out
to confirm the IMEI of the product.

◎ The IMEI is information required when requesting servicing or repairs.
◎ The IMEI tray cannot be removed from the main unit. Take care not to

apply force when handling.

◎ You can also operate the product to confirm the IMEI.

On the home screen, “Apps Sheet” [[Settings] [[About phone]
[[Status] [[SIM status] and confirm the IMEI field.

Display (Touch panel)

◎ If the product is equipped with a commercially available corresponding

flip cover, you can turn the display on/off by opening/closing the flip
cover. If you close the equipped flip cover obliquely, the display may not
be turned off.

®

/NFC.

4

Proximity sensor/Light sensor, earpiece (receiver)/speaker, mouthpiece

IC (metal) part

au Nano IC Card 04

Front Back

Slot

au Nano IC Card 04 tray

分

(microphone)

◎ This product combines the earpiece and speaker. When you convert to a

hands-free talking or end a call, sound gradually increases to the set
volume to prevent a loud sound from the speaker at your ear.

◎ Placing stickers, etc. over the proximity sensor/light sensor may prevent

the product from operating properly.

◎ Covering earpiece (receiver)/speaker or mouthpiece (microphone) with

stickers, fingers, etc. may hinder product performance.

Internal antenna, Wi-Fi®/Bluetooth® antennas, GPS antenna

◎ Antennas are built into the product. Do not cover with hand during calls or

data communication. Doing so may affect call/communication quality.

Earphone/Microphone jack

◎ An earphone/microphone with the switch or depending on the type of the

earphone/microphone, it may not be available with the product.

Using the au Nano IC Card 04

au Nano IC Card 04

The au Nano IC Card 04 records your personal information such as phone
numbers.
This product supports au Nano IC Card 04.

◎ Make sure to unplug the microUSB plug of the common AC adapter 05

(sold separately) etc. from the product when attaching or removing the au
Nano IC Card 04.

Attaching the au Nano IC Card 04

Before attaching the au Nano IC Card 04, turn the product off.

A Open the au Nano IC Card 04/microSD memory card cover.

Hook the tip of a finger into the slot and pull out it forward (A), and then
rotate it in the direction of the arrow to open (B).

B Slowly pull the au Nano IC Card 04 tray straight out by

hooking a finger on it.

5

C Put the au Nano IC Card 04 on the au Nano IC Card 04 tray.

au Nano IC Card 04 tray

分

Make sure the notches on the au Nano IC Card 04 and au Nano IC Card
04 tray face the proper orientation and put the card slowly on the tray.

IC (metal) part up

au Nano IC Card 04

Notches

au Nano IC Card 04 tray

D Slowly insert the au Nano IC Card 04 tray into the au Nano

IC Card 04 tray slot, taking care not to let the tray be
caught on the metal parts on both sides of the slot.

Confirm the position of the au Nano IC Card 04 tray slot and the orientation
of the au Nano IC Card 04 tray carefully, and insert the tray all the way into
the slot in the direction of the arrow. Inserting the tray forcibly may
damage the tray.

au Nano IC Card
04 tray slot

Metal parts

E Close the au Nano IC Card 04/microSD memory card cover.

◎ Inserting the au Nano IC Card 04 tray not deeply enough may prevent the

product from functioning properly.

◎ Take care not to lose or damage the removed au Nano IC Card 04 tray.

Removing the au Nano IC Card 04

Before removing the au Nano IC Card 04, turn the product off.

A Open the au Nano IC Card 04/microSD memory card cover

(zP. 5).

B Slowly pull the au Nano IC Card 04 tray straight out by

hooking a finger on it.

C Remove the au Nano IC Card 04 from the au Nano IC Card

04 tray.

D Slowly insert the au Nano IC Card 04 tray into the au Nano

IC Card 04 tray slot, taking care not to let the tray be
caught on the metal parts on both sides of the slot.

Confirm the position of the au Nano IC Card 04 tray slot and the orientation
of the au Nano IC Card 04 tray carefully, and insert the tray all the way into
the slot in the direction of the arrow. Inserting the tray forcibly may
damage the tray.

6

Metal parts

分

au Nano IC Card
04 tray slot

E Close the au Nano IC Card 04/microSD memory card cover.

Using a microSD Memory Card

Attaching a microSD Memory Card

A Open the au Nano IC Card 04/microSD memory card cover

(zP. 5).

B Slowly insert the microSD memory card into the microSD

memory card slot.

Confirm the orientation for inserting, then insert in the direction of the arrow
until it clicks and is locked.
Releasing the microSD memory card before it is locked may cause it to
pop out.

microSD
memory card slot

Metal part down

C Close the au Nano IC Card 04/microSD memory card cover.

◎ Make sure that the top/bottom and front/rear of the microSD memory card

are facing correctly.
Trying to force a wrongly oriented card into the slot could make it
impossible to remove the card or result in damage.

◎ Do not touch the terminal part of a microSD memory card.

Removing the microSD Memory Card

Be sure to unmount microSD card before removing. Not doing so may corrupt
data or card may no longer operate properly.

A Open the au Nano IC Card 04/microSD memory card cover

(zP. 5).

B Slowly push the microSD memory card in all the way.

After it clicks, let the microSD memory card come back out a little without
releasing it. Releasing the card when it is pushed deeply into the slot may
cause it to pop out.

C Slowly pull the microSD memory card straight out.
D Close the au Nano IC Card 04/microSD memory card cover.

7