␊ Applying the Air Bubble Washing System.
␊ Applying One-Touch Operation System.
␊ Realizing calm washing through the innovational low-noise
design.
␊ Before operating this washer, please read this instruction
completely. Thank you.
Full-Auto Electric Washing Machine
Model: ES-D159T-SL / ES-D159T-WH
A NOTE TO YOU
Thank you for buying a SHARP appliance.
SHARP washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer properly and safely.
Please read it carefully.
INSTRUCTION MANUAL
CONTENTS Page
PARTS AND FEATURES ......................................2
WASHER SAFETY ...............................................3
INSTALLATION INSTRUCTIONS..........................4
ELECTRICAL REQUIREMENTS ...........................5
INLET HOSE CONNECTION.................................6
OPERATING YOUR WASHER..............................7
DESCRIPTION OF THE CONTROL PANEL .........8
WASHING PROCEDURE AND COURSE SELECTION
...9
GUIDES FOR OTHER USEFUL PROGRAMS ...11
GENERAL PROCEDURE FOR OPERATION .....12
WASHER MAINTENANCE ..................................13
HOW TO CLEAN THE FILTER............................14
REMOVING STAINS............................................15
TROUBLE SHOOTING........................................16
SPECIFICATION..................................................17
Your washer is adopted Ag+ Ion pulsator
that can sterilize your clothes and
deoderize bad smell.
Your washer is equipped with the bubble
generator that generates a great deal of
air bubble.
The air bubbles knock the dirt out of the
clothes during wash and they push up the
heavy dirt to remove it during rinse.
Because the double washing method
using both air bubble & water current is
applied to this washer, wash efficiency is
excellent in comparison with the original
washer system.
➢
➢
➢
➢
Applying Ag+ Ion Pulsator & Air Bubble
Washing System
2
PARTS AND FEATURES
The parts and features of your washer are illustrated on the page.
Become familiar with all parts and features before using your washer.
NOTE
• The drawings in the book may vary from your washer model.
They are designed to show the different features of all models coverd by this book,Your
model may not include all features.
• COLD WATER TAP
After using the washing
machine, close the water tap.
ACCESSORIES
WATER TAP
ADAPTER
INLET HOSE
HOSE DRAIN
(FOR NON-PUMP)
USER MANUAL COVER UNDER
UP
• CONTROL PANEL
• POWER CORD
• HOSE DRAIN
• ADJUSTABLE LEG
• LED LAMP (option)
• CASE DETERGENT
AND SOFTENER
3
WASHER SAFETY
Save these instructions
Your safety is important to us.
To reduce the risk of fire, electrical shock, or injury when using your washer, follow
basic precautions including the following:
Understanding your responsibilities
• Do not wash items that are soiled with vegetable or cooking oil.
These items may contain some oil after laundering.
Due to the remaining oil, the fabric may smoke or catch fire by itself.
• Do not use chlorine bleach and ammonia or acid (Such as vinegar or rust remover) in the
same wash. Hazardous fumes can form.
• Unplug power supply cord before attempting to service your washer.
• Do not wash fiber glass materials.
Small particles can stick to fabrics and cause skin irritation.
• Do not use hot water that temperature is over 50°C (120°F).
It can cause a deformation of plastic parts.
• Do not spray water on the control panel and back cover of the washer.
It can cause a fire or an electric shock.
• Flammable fluids (dry-cleaning solvents,
kerosene, gasoline, etc.) should not be
used or stored in near your washer.
Do not add flammable fluids to your wash
water.These substances give off vapors
that can create a fire hazard or explosion.
• Do not allow children to operate, play with,
or crawl on or inside your washer.
Supervise children closely when your
washer is used near them.
• After starting a cycle, do not reach into the
spin basket unless all motion stops.
• Do not tamper with the controls.
• If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in
order to avoid a hazard
• If the appliance is supplied from a cord
extension set or electrical portable outlet
device it should be positioned so it is not
subjected to splashing or ingress of
moisture.
Please ...
• Have only a qualified person install, repair,
or replace parts on washer.
• Maintain washer properly.
• Protect washer from the weather and keep
it where the temperature will not fall below
freezing.
• Do not install the washer at a place of
extremely high humidity. It could cause an
Electrical shock or a short circuit.
• Connect washer to the correct outlet,
electrical supply, water supply, and drain.
• Ground washer properly.
Read all instructions before using your washer
4
INSTALLATION INSTRUCTIONS
Location of washer
Check location where washer will be installed. Make sure you have everything
necessary for correct installation.
Proper installation is your responsibility.
• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Install the washer on the horizontal solid floor.
• To reduce the risk of fire, this appliance must be fastened or otherwise secured to an
uncovered concrete floor.
Drain system
Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose the washer.
If the washer is installed on an unsuitable floor, it could make
considerable noise, vibration and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for
horizontal setting.
• Earthed electrical outlet(B) is required with 20cm of bottom
back of washer cabinet.
• Water faucets (C) must be within 1M of the upper back of
the washer cabinet and provide water pressure 0.3kgf/cm
2
-
8kgf/cm2(0.03MPa ~ 0.8MPa).
• Connect the drain hose to the drain outlet at the back of the washer.
Non-Pump Model
NOTES
• The opening must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
UP
C
B
A
DOWN
Drain hose
5
WARNING
• Electrical earth is required on this washer.
• If it does not fit the outlet, have a proper outlet
installed by a qualified electrician.
• Don’t earth to a gas pipe.
• Don’t change the power supply cord plug.
• Check with a qualified electrician if you are not
sure the washing machine is properly earthed.
ELECTRICAL REQUIREMENTS
1 In case that it goes over
a door sill.
Don’t let the height of the
drain hose exceed 20cm
from the bottom of
washer.
2 In case of extending the
drain hose.
Don’t let the total length
exceed 3m.
3 Be careful that the end of
the drain hose is not
immersed in water.
Non-Pump Model
20Cm
3m
C
B
A
Electrical shock hazard : Failure to follow these instructions could result in
death or serious injury.
Recommended earthing method
For your personal safety, this washer must be earthed.
This washer is equipped with a power supply cord (A) having a earthing plug (B).
To minimize possible shock hazard, the cord must be plugged into a mating
earthing-type wall receptacle (C).
If a mating wall receptacle is not available, it is the personal responsibility and
obligation of the customer to have the proper earthed wall receptacle installed by a
qualified electrician.
6
INLET HOSE CONNECTION
For Ordinary Tap
1 Pull down the collar of the
inlet hose to separate it
from the water tap
adapter.
2 Loosen the four screws
properly in fitting into
water tap.
3 Fit the water tap adapter
into the water tap and
tighten the four screws
evenly while pushing up
the adapter so that the
rubber packing can attach
to the water tap tightly.
4 Remove the tape, and
screw connector B into
connector A tightly.
5 Connect the inlet hose to
the water tap adapter by
pulling down the collar of
the hose end.
6 Connect the inlet hose
adapter of the hose to the
water inlet of the washing
machine by turning it
clockwise to be fixed
tightly.
For Screw-Shaped Tap
• Please check the rubber
packing inside the inlet hose
adapter of the hose.
Connector A
Connector B
TAPE
1 Connect the inlet hose to
the water tap by screwing
the connector tightly.
2 Connect the connector-
inlet supplied if
necessary.
3 Insert the inlet hose
adapter into the water
inlet of a washing
machine and turn it to be
fixed. .
* Check the packing in the inlet
Connector
Hose Connector
Rubber
Packing
Connector
inlet
Connector
Hose Connector
Rubber
Packing
7
OPERATING YOUR WASHER
To obtain the best wahing results, you must operate your washer properly.
This section gives you this important information.
• Close zippers, snaps, and hooks to avoid
snagging other items.
Remove pins, buckles, and other hard
objects to avoid scratching the washer
interior.
• Empty pockets and turn them inside out.
• Turn down cuffs and turn synthetic knits
out to avoid pilling.
• Tie strings and sashes so they will not
tangle.
• Treat spots and stains.
(see “Removing stains” on page16)
Preparing clothes for washing
• Separate heavily soiled items from lightly soiled ones, even if they would normally be
washed together.
• Separate dark colors from light colors, colorfast items from non-colorfast item.
Sorting
• Drop items into washer loosely. Items
should move easily through wash water
for best cleaning and wrinkle-free results.
• Load washer properly and select correct
load size setting.
Overloading and selecting a setting too
small for the wash load can:
- cause poor cleaning
- increase wrinkling
- create excessive lint
- wear out items faster (because of pilling)
• Mix large and small items in each load.
Load evenly to maintain washer balance.
An off balance load can make the washer
vibrate during spin.
• Reduce wash time when using a small
load size setting. Loads with only a few
small items need less wash time.
• Use a large load size setting to reduce
wrinkling with permanent press clothes
and some synthetic knits. These items
should have more room to move in the
water than heavy items. (towels, jeans)
Loading
8
THE FUNCTIONS OF THE CONTROL PANEL
• Press this button to turn the power 'ON' or 'OFF'.
• Operation and temporary stop is repeated as it is pressed.
• When you want to change course in operating;
press the 'Start/Pause' button → Select the course that you want to change
→ press the 'Start/Pause' button again.
• It can be used to select the full-automatic course.
• By turning(right) the 'Program' Dial, course will be selected by following
order :
Auto/Fuzzy → Baby Care → Quick → Tub clean → Blanket → Wool → ...
• This selection is effective for blue-jean, etc ...
• Washing time, rinse times and spin time are selected automatically depend
on amount of laundry.
• Select the desired amount of water depending on the amount of laundry.
• As the button is pressed, water level is selected by
MEDIUM → HIGH → EXTRA LOW → LOW → MEDIUM → ...
• It can be used to adjust washing time.
• As the button is pressed, washing time will be repeated.
18 → OFF(0) → 6 → 10 → 15 → 18 → ...
• Use it to change the number of rinses.
• As the button is pressed, the times of rinse will be repeated.
3 times → 4 times → OFF(0) → 1 time → 2 times → 3 times → ....
• It can be used to change spin time.
• As the button is pressed, spin time will be repeated.
5 → 7 → 9 → OFF(0) → 1 → 3 → 5 → 7 → ...
• Use it to set time reservation.
• If the 'Res.' button is pressed, '2' is displayed.
You can reserve it from 2 to 48 hours in advance.
• Each pressing of the button advances on time delay by one hour.
2 → 3 → 4 → … → 46 → 47 → 48 → 2 → 3 → 4 → …
• It can be used to adjust the wind-drying time after spin.
• As the button is pressed, the wind-drying time will be repeated as following;
10 → 20 → 30 → 40 → 0
9
WASHING PROCEDURE AND COURSE SELECTION
FULL AUTOMATIC COURSE
adjust to
‘Baby care’
1. AUTO/FUZZY COURSE(SENSOR) ;
• This selection is for general washing except extraordinary clothes.
• The sensor selects properly the various kind of washing condition such as washing time, rinse times,
spin time and water level.
2. BABY CARE COURSE ;
• This selection is dffective for baby clothes.
• Washing time, rinse times and spin time are selected automatically depend on amount of laundry.
• You may select the desired water level depending on the amount of laundry.
adjust to
‘Tub clean’
4. TUB CLEAN COURSE ;
• This selection is useful to clean the tub.
• Washing time, rinse times and spin time are selected automatically depend on amount of laundry.
• Washing time, rinse times, spin time, water level, and 'Res.(reserved washing)' are not selectable with
Cleaning program.
• You can keep the tub clean by executing Tub Cleaning once a month.
adjust to
‘Quick’
adjust water
level, washing
time, rinse time,
spin time
3. QUICK COURSE ;
• This selection is useful to reduce water consumption and washing time for less dirty clothes.
10
6. WOOL COURSE ;
• This selection is effective for wool clothes.
• Do not put leather clothes, or chamois clothes into the washing tub for washing.
It may cause shrinkage or deformation to the clothes.
• Please use the neutral detergents only.
• The water level is fixed to 'Medium'.
• Do not exceed the recommended amount of laundry - 1.5kg.
• Only 'Medium' and 'High' water level with Wool program.
• Spin time, wash time, rinse times and 'Res.(reserved washing)' are not selectable with Wool program.
adjust to
‘Wool’
5. BLANKET COURSE ;
• This selection is effective for washing heavy load(blanket, curtain, carpet, etc …).
• Washing time, rinse times and spin time are selected automatically depend on amount of laundry.
• You may select the desired water level depending on the amount of laundry.
adjust to
‘Blanket’
adjust water
level, washing
time, rinse time,
spin time
11
GUIDES FOR OTHER USEFUL PROGRAMS
2 Set the washing
time.
2 Set the rinsing
time.
2 Set the washing
time and rinsing
time.
2 Set the washing
time and spinning
time.
2 Set the spinning
time.
2 Set the rinsing
time & spinning
time.
2 Select the
spinning time.
Partial process Process Procedure
Reservation Washing
• Reservation can be made from 2 hours to 48hours.
Press
START/PAUSE
button
Set the
reservation
time
• Wool and tub clean course cannot be reserved.
• Your reservation time will show at display panel.
Select the
course
Wash, Rinse or Spin Selection
Only Wash
Only Rinse
Wash & Rinse
Wash & Spin
Only Spin
Repeat rinse &
Spin after
washing
Only Drain
1 Press
the Power
button.
3 Set the water
level.
4 Close the lid
(door) and press the
Start/Pause button.
Drain process is not
applicable for this
cycle. Please refer
below for the spin
function.
The buzzer will
sound after process
complete and power
will switch off
automatically.
3 Close the lid (door) and press the
Start/Pause button.
3 Open the lid (door) and press the
Start/Pause button.
The buzzer will
sound and display
panel will show "LE"
signal. But, the
power will not turn
off automatically.
12
GENERAL PROCEDURE FOR OPERATION
2. OPTIONAL STEP
• Pour liquid fabric softener into the dispenser using the amount recommended on the
package.
Avoid dripping or spilling any fabric softener on the load.
• Dilute fabric softener with warm water.
Fill dispenser with warm water until liquid reaches the base line in the case.
The dispenser is for liquid fabric softener use only.
• The liquid fabric softener will be put into the TUB automatically when final Rinse process.
3. Close the washer lid (door).
4. Press the power button.
5. Select the cycle.
6. Press the “Start/Pause” button.
1. Add measured detergent to the detergent case. (Follow manufacturer's directions for safe use)
Inlet Hole
Base Line
Softener inlet
Detergent
13
CARING FOR YOUR WASHER
Proper care of your washer can extend its life. This section explains how to care for
your washer properly and safely.
Cleaning your washer
Winter storage or moving care
Install and store your washer where it will not freeze. Because some water may stay in the hoses,
freezing can damage your washer.
If storing or moving your washer during freezing weather, winterize it.
Non-use or vacation care
Operate your washer only when you are at home.
If will be on vacation or not using your washer for an extended period of time, you should:
• Unplug the power supply cord or turn off eletrical power to the washer.
• Turn off the water supply to the washer .
This helps avoid accidental flooding (due to a water pressure surge) while you are away.
Wipe up detergent, bleach, and other spills with
a soft, damp cloth or sponge as they occur.
Occasionally wipe the outside of the washer to
keep its looking like new one.
Clean interior with 250ml of chlorine bleach
mixed with 500ml of detergent.
Run washer through a complete cycle.
Repeat this process if necessary.
Exterior Interior
Do not put sharp or metal object in your washer, or they can
damage the finish. Check all pockets for pins, clips, money,
bolts, nuts, etc.
Do not lay these objects in your washer after emptying
pockets.
• Turn off water faucet.
• Disconnect and drain water inlet hoses.
• Run washer on a drain and spin setting
(see page 11) for 1 minute.
• Unplug the power supply cord.
• Flush water pipes and hoses.
• Reconnect water inlet hoses.
• Turn on water faucet.
• Reconnect power supply cord.
To winterize washer To use washer again
14
HOW TO CLEAN THE FILTER
Cleaning the water inlet filter
• Clean the filter when water leaks from the water inlet.
Cleaning the Lint Filter
• This washer has two type of lint Filter in order to increase lint filtering performance.
It is assembled in the middle area of Tub.(Option)
1 Pull the power
plug out before
cleaning it.
2Turn off the water
supply to the
washer and
sperate the inlet
hose.
3 Pull the inlet filter
out.
4 Remove the dirt
from the inlet filter
with a brush.
1
Pull the button with pulling
upward.
2
Open the Cover and get rid of
lint being the Inside of Filter
then close the Cover.
3
Assemble the Lint Filter as it
was, by pushing toward wall
with fixing slot.
15
Removing stains
Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results.
Soaking helps remove protein-type stains like blood, milk, or grass. Prewashing helps loosen
soil before washing.
Stain removal rules
• Use warm water for soaking or prewashing stained laundry. Hot water can set stains.
• Most stains are easier to remove when they are fresh.
• Before treating any stain, find out what kind of stain it is, how old the stain is, what kind of
fabric it is, and if the fabric is color fast. (Check the care label)
• Washing and drying can set some stains.
• Start with cold or warm water, hot water can set some stain.
• When bleach is recommended, use a bleach that is safe for the fabric.
• Put the stained area face down on a paper towel or white cloth. Apply the stain remover to
the back of the stain. This forces the stain off the fabric instead of through it.
Stain removal guide
Blood
Chewing gum
Cocoa, Chocolate
Coffee
Cream/Milk
Ice cream
Deodorant
Egg
Fabric/Softener
Fruit stains
Grass
Grease and oil
Iron or rust
Lipstick
Mildew
Mud
Oil-based Paints
Water-based Paints
Scorch marks
Rinse immediately in COLD water.
If stain remains, soak in cold water with an enzyme prewash.
Use ice in plastic bag to harden the gum.
Scrape off what you can and the sponge with white spirits.
Sponge with COLD water and soak in an enzyme prewash.
If stains persist, rub in a little detergent and rinse in cold water.
Blot up quickly and rinse out in COLD water.
Rub in a little detergent and wash in the maximum temperature allowed for the
fabric type.
Rinse in COLD water and wash normally.
If stain is still apparent, sponge with white spirits.
Rub affected area with white vinegar and then rinse out in COLD water.
Sponge with white spirits.
Treat stiffened areas with enzyme prewash.
Soak in a COLD enzyme prewash, rinse and wash normally.
Rub affected area with bar soap and wash normally.
Treat as soon as possible by sponging with COLD water.
Rub a little detergent on the stain and wash normally.
Sponge with white spirits.
Rub in an enzyme prewash and wash as normally.
Lay the affected area face down on an absorbent cloth and work from the back.
Sponge with white spirits or dry cleaning fluid. Wash normally.
Apply lemon juice and salt and place in the sun. Wash normally.
Sponge with white methylated spirits and wash normally.
Wash in WARM water and detergent.
Moisten area with lemon juice, dry in the sun and wash normally.
If stain persists and the fabric allows, use a bleach.
Brush off any dry mud. Rinse in cold water.
If stain persists rub in a little detergent and wash normally.
Scrape off any fresh paint and sponge with a non flammable dry cleaning fluid
and wash normally.
Treat while still wet, rinse in WARM water and wash normally.
Dampen a cloth with hydrogen peroxide, lay it over the affected area and press
with a fairly hot iron.
STAIN TO REMOVE
16
• Is there a power failure?
• Is the power cord correctly connected to an electric outlet?
• Is the electric fuse broken?
• Did you turn on the power?
• Did you press Start/Pause button?
• Is there correct amount of water in the tub?
• Did you connect the inlet hose and open the water tap?
• Is the inlet hose or the water tap frozen?
• Is the water supply shut off?
• Does foreign matter block up the inlet hose filter?
• Is the drain hose frozen or blocked up by dirt?
• Is the drain hose kinked or deformed?
• Is the end of the drain hose immersed in water?
• Is there excessive dirt inside the pump housing?
• Is the clothes in the tub collected on one side?
• Is the washing machine installed on an uneven floor or is the
vibration serious?
• Is the lid open?
(The lamp will light up in this case.)
TROUBLE SHOOTING
Most problems are easily solved if you understand the cause.
Check the following list for problem before calling for service.
Before calling for service, check these
• The washer will not
operate at all.
• Water is not supplied;
If water supply is not finished
within 20 minutes, the lamp
will light up, and the buzzer will
sound to indicate a problem.
PROBLEM CHECK POINT
■
These cases are not malfunctions
•
The sound “wing” heard during water supply is the operating sound made by the water inlet valve.
• The sound “sha” heard in stopping the tub is the sound that comes from the autobalancer of
the tub.
• The sound “wung” heard during wash or spin is the operating sound made by the air bubble
generator.
• The washer will not drain;
If the drain is not finished within
selected time, lamp will
light up, and the buzzer will
sound to indicate a problem.
• The washer will not spin;
If the clothes is collected on one side
during spin and the tub becomes
unbalanced, the spin operation will be
interrupted, and then this unbalanced
condition will be corrected by
following operation: WATER SUPPLY
ᵎ RINSE ᵎ DRAIN However if the
unbalanced condition is unchanged
despite repeating the above
operation, the lamp will light up,
and the buzzer will sound to indicate
a problem.
NOTE
Please check the point before calling for a service.
If the supply cord is damaged, it must only be replaced by a repair shop appointed by
manufacturer, because special purpose tools are required.
17
SPECIFICATION
POWER SOURCE 220V/ 50Hz
POWER CONSUMPTION 550W
Dimension (WxHxD,mm) 630 x 1040x 700
Unit Weight 48 kg
Standard Water Consumption 240ὀ
Operating Water Pressure 0.3kgf/cm2~ 8kgf/cm2(0.03MPa ~ 0.8MPa)
Wash Mode Washing Type (Air-Bubble + Ag+ Ion Pulsator)
MODEL NO. ES-D159T-SL / ES-D159T-WH
NOTE
• In case of moving Washing Machine, please follow the following
picture.
Front Top
vviissiioonn@
@
ccrreeaattiivveeLL@@iinnccNN
Էړ ܞĸ ࣃۉʷ
VѨݖ ێΟӂ˱ Tࠚ
ABOUT THIS MANUAL
ABOUT THIS MANUAL
ɽʁъܞڜ ɮ
Ҹ˝ sharp ض ش ٙ ش
fN@model dwfMRVPnpmcmT
bN@model esMdQUYtMsl@O@esMdQUYtMwh
b@u@y@e@r ࢚Ĺ
܆ࣽ
ېې լլ
˝࠾
memo@܂րZ@H߭ QWI
ِߏ
vision
ɽ ʁ
іОր
telZ WSPMPVVP@faxZ WSPMSWXX
QTNPRNRPMݖL@QW@@֭Ŕ R
QTNPTNRSMݖL@XL@YL@QPL@QQ@ր܄@֭Ŕ U@Hێ࢛ٝ ɮI
QTNPTNSPMTL@UL@X@ր܄@֭Ŕ S@Hێ࢛ٝ ɮI
QTNPUNPRMTL@VL@QW@ր܄@֭Ŕ S@Hێ࢛ٝ ɮI
QTNPUNRPMRL@VL@XL@QRL@QW@ր܄@֭Ŕ U
QTNPUNRSMRL@TL@QW@ր܄@֭Ŕ S
QTNPUNRWMXL@YL@QPL@QQHϴҸېѽĈIր܄@֭Ŕ THێ࢛ٝɮI
QTNPUNRXMX@ր܄@֭Ŕ QHێ࢛ٝɮI
QTNPVNQVMXL@YL@QPL@QQHϴҸېѽĈIր܄@֭Ŕ THێ࢛ٝɮI
Loading...