SHARP ARE014 Technical Report

Date: Nov. 5, 1996
DIGITAL COPIER : AR-5040
No. : ARE-014
CHANGE IN THE ROLLER FRAME IN THE FINISHER ELEVATOR FRAME UNIT.
1.Model Name: AR-5040
2.General: There was a danger of the sensor and the roller frame F in the finisher elevator frame
unit coming in contact with each other. To alleviate this problem the roller frame F has been changed into one that is divided into two parts.
(Old) Roller frame F CFRM-0781FC01 Q’ty: 1
Changed
Sensor light shield plate LPLTM5319FCZZ Q’ty: 1(added) M3 x 8 XBBSD30P08000 Q’ty: 2(added)
(Assembly procedure)
Changed
Roller frame F CFRM-0781FC01
When fixing the screws, the screw lock should be applied.
Roller frame F CFRM-0781FC02
screw
3.Action: From 1996 August production.
The screw should be driven so that the sensor light shield plate is positioned in the center portion of the sensor detection area.
Sensor light shield plate LPLTM5319FCZZ
screw
M3 × 8bind
Q'ty: 2
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
No.
Model
name
Version P/G No.
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
52 -32
AR-5040 All
52
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new t y pe . New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p la c e of c u rr en t ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
!
CFRM-0781FC01 CFRM-0781FC02 AR Roller frame F
LPLTM5319FCZZ AD
XBBSD30P08000 AA Screw (M3 x 8)
5. Interchangeable if replaced with same types of relate d parts in use .
6. Others .
Sensor light shield plate
1st lot
’96/8
3
2/2
Loading...