SHARP ARE004 Technical Report

Date: Aug. 21, 1995
DIGITAL COPIER : AR-5040
No. : ARE-004
1.CORRECTION OF PARTS CODE ERROR.
2.ADDITION OF A SHEET TO COVER THE ELEVATOR MOTOR TO PREVENT THE INFILTRATION OF FOREIGN MATTER.
1. Correction of parts code error.
1.Model name: AR-5040.
2.General: An error in a portion of the parts codes listed in the parts guide has been found, and
correction of the error is requested.
Parts guide No. 74 -28 LX-BZ0198FCZZ LX-BZ0108FCZZ
1st mirror Adjusting screw Silicon blade screws
2. Addition of a sheet to cover the elevator motor to prevent the infiltration of foreign matter.
1.Model name: AR-5040.
2.General: There was a possibility of infiltration of foreign matter through the opening section
above the staple tray in the finishing unit. If by chance metallic matter happens to infiltrate into the elevator motor there is a possibility that it may come in contact with the terminals of the motor. To alleviate this problem, a cover sheet has been attached to the elevator motor.
3.Action: From the start of 1995 May production.
Elevator motor
SHARP CORPORATION Reprography Division
Motor cover sheet
1/2
Green
C
Ref.
No.
Model
name
Version P/G No.
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
1
AR-5040 All
2 52 PSHEP3960FCZZ AD
<Interchange>
1. Inte rc ha ng ea bl e. 4. Not i nt erc h an ge ab l e.
2. Current type can be used in place of new type. New type cannot be used in place of current type.
3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
speci fied on es fo r m ai n ta in ing the sa fe ty an d pe r fo rma nc e o f the set .
74 -28
!
LX-BZ0198FCZZ LX-BZ0108FCZZ AC Screw
Motor cover sheet
5. Interchangeable if replaced with same types of relate d parts in use .
6. Othe rs .
1 st lot
’95/5
* Parts guide correction only
*
2/2
Loading...
+ 1 hidden pages