|
Date : |
Jun. 16, 1995 |
|
DIGITAL COPIER : AR-5040 |
No. : |
ARE-002 |
|
|
|
NOTIFICATION OF CHANGED PARTS AND NEW |
|
|
|
PARTS ADDITIONS. |
|
1.Model name: |
|
|
|
AR-5040 |
|||
2.General: |
Changes in parts codes and the addition of new parts have been carried out in the |
||
|
model listed above from the start of mass production and are hereby reported. |
3.Description: 1. Change in the 100MXL belt in the finisher delivery guide frame unit.
2.Addition of protective sheets A and B for the PG edge on the upper surface of the delivery guide of the finisher delivery guide frame unit.
|
Standard |
|
PG edge protective sheet A |
Upper surface of the delivery |
|
guide (P/G 57 -5) |
PG edge protective sheet B |
3.Addition of delivery guide mylar to lower edge B of the delivery guide in the finisher delivery guide frame unit.
SHARP CORPORATION |
Reprography Division |
1/6
Green
C
4.Addition and resetting of AC cord.
5.Addition of parts and change in the screws of the conveyor guide unit in the front and rear frames.
Front frame
2/6