
Date: Feb. 23, 1995
DIGITAL COPIER : AR-5040
No. : ARE-001
PARTS CHANGE AND ADDITION
1.Model name: AR-5040
2.General: There have been changes and additions of parts in the model above from the start of
mass production.
3.Description: 1. Addition of CCD protection sheet to CCD cover in the scanner unit
CCD protection sheet (added)
CCD cover
(P/G 12 -28)
2. Parts’ code change in the fiber fixing cushion of the scanner unit
3. Addition of FIN positioning spacer to the chassis joint plate in the finisher section
SHARP CORPORATION Reprography Division
1/4
Green
C

Rear Front
FIN positioning spacer
(added)
Standard
Chassis joint plate
Standard
(P/G 48 )
4. Parts’ code change of TC spring of TC-AC case unit
5. Addition of polyslider and discontinuance of screw in the waste toner box unit
A screw discontinued
Polyslider (added)
6. Change of screws and discontinuance of open detection lever in the finisher unit
2/4

7. Addition of a shield seal against light to the reflector in the copy lamp unit
Slit end standard Slit end standard
0~1mm
Slit
Slit shield seal against light (two)
PSEL-0392FCZZ
Front sideRear side
0~1mm
Attachment position
(pointed by arrow)
8. Parts code change (for UK only) in the key operator guide manual
9. Parts code change in the CL lead cushion in front of the optical unit
10. Dicontinuance of the FIN paper guide and its attachment screw in the finisher frame
unit
1 1. Parts’ code change of the transport clutch in the paper feeding drive frame unit and
the drive box upper unit
12. Addition of the discharge brush in the front side of the fusing unit
Discharge brush (added)
3/4

Ref.
Model
No.
1
2
3
4 46 -13 MSPRP1550FCZZ MSPRC2326FCZZ AE TC spring SE
5
6
AR-5040
name
Version P/G No.
12 — PSHEZ3759FCZZ AN
12 -27 PCUSS0308FCZZ PCUSF0324FCZZ AC
48 — PSPAZ0657FCZZ AB
All
40 —
40
47 -12
51 -91 MLEVF0635FCZ1 Discontinued — Open dtect lever
Current parts New parts
Parts code Parts code
LX-WZ0117FCZZ
(Q’ty: 2)
XBPSD40P08KS0
(Q’ty: 2)
XBPSD30P25K00
(Q’ty: 2)
Q’ty change
2 → 1
XBPSD30P25000
(Q’ty: 2)
Price
Parts name
rank
CCD protection
sheet
Fiber fixing
cushion
FIN positioning
spacer
AB Polyslider
AA Screw (M4x8)
AA Screw (M3x25)
Effec-
Inter-
tive
change-
time
ability
1st lot —
Note
7 13 —
USA
8
9
10
11
12 20 -66
<Interchange>
1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specifie d ones fo r m ain ta in i ng t he s a fe ty an d pe r fo rma nc e o f th e s et .
74 -17 TINSE1253FCZZ TINSE1266FCZZ BD
only
4 -49
51 -133 PGIDH1514FCZZ Discontinued — FIN paper guide
51 -134
All
28 -10
36 -21
!
PCUSS0307FCZZ
(Q’ty: 2)
LX-BZ1028ACZZ
(Q’ty: 3)
PCLC-0210FCZZ PCLC-0243FCZZ AW Transport clutch
PBRSR0059FCZZ
(Q’ty: 1)
PSEL-0392FCZZ
(Q’ty: 2)
PCUSF0323FCZZ
(Q’ty: 2)
Discontinued — Screw (M3)
PBRSR0059FCZZ
(Q’ty: 2)
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Others .
Slit shield seal
AC
against light
Key operator
guide manual
AE CL lead cushion N
AK Discharge brush
4/4