General Notes................................................................. 205
Page 5
Introduction
About the User Guide
In the User Guide, most operation descriptions are based on
the handset at time of purchase.
Unless noted otherwise, descriptions are for Home Screen
(AQUOS Home). Some operation descriptions may be omitted.
The information in the User Guide is subject to change
without prior notice.
Before Using This Product
Read "Safety Precautions" thoroughly beforehand for proper
usage.
Accessible services may be limited by subscription contract
conditions.
Data Communication
・Handset is designed to be always connected to the Internet.
Communication is initiated automatically for some functions
such as data syncing.
・Large-volume data communication, such as downloading
applications and viewing videos, incurs expensive
transmission fees. Subscription to a flat-rate plan is
strongly recommended.
・Even if connected by Wi-Fi, some applications and services
incur transmission fees.
3
Introduction
Screenshots & Key Labels
Screenshots in the User Guide may differ in appearance with
actual Display. Key labels in the User Guide are simplified for
description purposes and differ with actual Display.
Other Notations
In the User Guide, the product is referred to as "handset."
microSD™/microSDHC™/microSDXC™ Card is referred to as "SD
Card."
"901SH" here refers to this mobile phone "AQUOS sense3
plus."
(Japanese)
・Avoid applying labels. May damage SIM Card.
・SIM is replaceable (at cost) in case of loss/damage.
・Wipe clean with a dry, soft cloth.
・Always keep the IC (gold) chip clean.
SIM Card Cautions
Observe the following when using SIM Card.
・Within Japan, SIM Card must be installed to make
emergency calls (110, 119, 118).
・Always follow emergency procedures to suspend service
if your SIM Card or handset (SIM Card inserted) is lost/
stolen. For details, contact Customer Service.
・Customer is responsible for any damage caused by
inserting SIM Card in an other-brand IC card reader, etc.
SoftBank Corp. is not responsible in such case.
・It is recommended that you back up information that is
saved on SIM Card. SoftBank Corp. is not responsible for
damages from saved information that is lost.
・Always power off handset before inserting/removing SIM
Card.
・Note that SIM Card specifications and performance may
change without notice.
・Return SIM Card to SoftBank Corp. when canceling
subscription.
・SIM Card is the property of SoftBank Corp.
・Returned SIM Cards are recycled for environmental
purposes.
With Display upward, pull out Card Tray by hooking a finger
on groove (〇)
・With Display upward, pull out Card Tray. Pulling out Card
Tray with Display downward or handset held upright can
allow SIM Card and SD Card to fall from Card Tray and
become misplaced.
・Do not pull Card Tray forcefully or at an angle; damage may
result. Gently pull Card Tray out horizontally.
Set SIM Card in Card Tray
・Place gently, noting orientation of SIM Card (notch/IC (gold)
chip facing down).
・Make sure SIM Card is in Card Tray. Inserting Card Tray with
SIM Card on its edge may cause damage.
Insert Card Tray in SIM/SD Card Slot
SIM Card is inserted.
・Do not insert Card Tray upside down.
・Insert gently all the way horizontally in direction shown.
・Push Card Tray firmly where circled (○) so that there is no
gap between handset and Card Tray.
・To maintain water and dust resistance, use handset with
Card Tray completely closed.
Inserting SIM Card
Always power off beforehand.
・Set SIM Card in Card Tray beforehand. Do not insert SIM
Card without setting it in Card Tray.
Page 11
9
Removing SIM Card
Always power off beforehand.
With Display upward, pull out Card Tray by hooking a finger
on groove (〇)
・With Display upward, pull out Card Tray. Pulling out Card
Tray with Display downward or handset held upright can
allow SIM Card and SD Card to fall from Card Tray and
become misplaced.
・Do not pull Card Tray forcefully or at an angle; damage may
result. Gently pull Card Tray out horizontally.
Remove SIM Card
Insert Card Tray in SIM/SD Card Slot
Internal Storage and SD Card
Handset supports SD Card up to 512 GB. Some SD Cards may
not operate properly.
Internal storage can be used for saving data including system
data, applications, and video and photos taken with Camera.
Organizing photos shot on your
previous model
Inserting SD Card containing saved photos or videos that
were shot on a previous model may cause Sort images in
SD card to appear.
Tap CHECK START .
・
Tap CHECK START to optimize viewing of file names,
etc. in(Photos).
Internal Storage/SD Card Cautions
Data on Internal Storage/SD Card
Data on internal storage/SD Card may be lost/altered
due to accidents, malfunctions, repairs, handset upgrade/
replacement, mishandling, etc. Back up important data
regularly. SoftBank Corp. is not liable for any damages
resulting from loss/alteration of data.
・Do not insert or remove SD Card forcefully.
・Do not touch terminals or expose them to metal objects.
・Never power off while reading or writing data.
・Make sure not to erase or overwrite data accidentally.
Getting Started
SIM Card is removed.
・Do not insert Card Tray upside down.
・Insert gently all the way horizontally in direction shown.
・Push Card Tray firmly where circled (○) so that there is no
gap between handset and Card Tray.
・To maintain water and dust resistance, use handset with
Card Tray completely closed.
SIM-Unlocking Handset
Handset can be SIM-unlocked. SIM-unlocking handset allows
other-carrier SIM cards to be used with it.
・Some services, functions, etc. may have restrictions when
an other-carrier SIM card is used. SoftBank Corp. does not
guarantee operation whatsoever.
・For details on SIM unlocking, see SoftBank Website.
Cards). microSDXC Cards are supported by SDXC-compatible
devices only.
Exchanging Data with Non-SDXC-Compatible
Devices
To exchange data between handset and non-SDXC-
compatible devices, use SD Cards (microSD/microSDHC
Cards) supported by handset and those devices. Inserting a
microSDXC Card used on handset in a non-SDXC-compatible
device may corrupt card data. In such cases, do not format
the microSDXC Card on that device even if prompted to do
so.
Formatting deletes all microSDXC Card data and changes
the file system. The original storage capacity may
be unavailable after formatting. To use a corrupted
microSDXC Card, format it on an SDXC-compatible device.
AQUOS sense3 plus
Page 12
10
Save Location
By default, data, including photos and videos taken
with handset, is saved in internal storage. Even with
downloaded commercially-available applications described
as saving data on SD Card, data is saved in internal
storage.
・To save photos and videos taken with handset on SD
Card, insert SD Card before using Camera, then change
save location as follows.
In Home Screen,(Camera)COMMON
Save ToSD card
SD Card Caution
Keep SD Card away from infants; may cause choking if
swallowed.
Inserting SD Card
Always power off beforehand.
Insert Card Tray in SIM/SD Card Slot
SD Card is inserted.
・Do not insert Card Tray upside down.
・Insert gently all the way horizontally in direction shown.
・Push Card Tray firmly where circled (○) so that there is no
gap between handset and Card Tray.
・To maintain water and dust resistance, use handset with
Card Tray completely closed.
・Set SD Card in Card Tray beforehand. Do not insert SD Card
without setting it in Card Tray.
With Display upward, pull out Card Tray by hooking a finger
on groove (〇)
・With Display upward, pull out Card Tray. Pulling out Card
Tray with Display downward or handset held upright can
allow SIM Card and SD Card to fall from Card Tray and
become misplaced.
・Do not pull Card Tray forcefully or at an angle; damage may
result. Gently pull Card Tray out horizontally.
Set SD Card in Card Tray
・Place gently, noting orientation of SD Card (terminal side
facing down).
・Make sure SD Card is in Card Tray. Inserting Card Tray with
SD Card on its edge may cause damage.
Page 13
Formatting SD Card
When using a new SD Card for the first time, always format it
on handset.
・Formatting erases all data on SD Card. Format SD Card with
caution.
・When formatting, keep handset charged or charge it
adequately beforehand.
・Insert SD Card beforehand. See "Inserting SD Card" for
details.
In Home Screen,(Settings)
11
Getting Started
Storage settings
Storage
SD card
Format
FORMAT SD CARD
AQUOS sense3 plus
Page 14
12
Enter Operation PasswordOK
・If Operation Password is unset, follow onscreen prompts.
Done
Unmounting SD Card
In Home Screen,(Settings)
Storage
All data on SD Card is erased.
SD Card is unmounted.
・
To mount SD Card again, SD cardMOUNT .
Page 15
13
Removing SD Card
Always power off beforehand.
With Display upward, pull out Card Tray by hooking a finger
on groove (〇)
・With Display upward, pull out Card Tray. Pulling out Card
Tray with Display downward or handset held upright can
allow SIM Card and SD Card to fall from Card Tray and
become misplaced.
・Do not pull Card Tray forcefully or at an angle; damage may
result. Gently pull Card Tray out horizontally.
Remove SD Card
Charging Handset
Battery is built into handset.
Getting Started
Internal Battery
A lithium-ion battery is built into handset; it is not
removable.
Recycling
This product requires a lithium-ion battery. Lithium-
ion batteries are recyclable. To recycle a used lithium-
ion battery, take it to any shop displaying the recycling
symbol.
Insert Card Tray in SIM/SD Card Slot
SD Card is removed.
・Do not insert Card Tray upside down.
・Insert gently all the way horizontally in direction shown.
・Push Card Tray firmly where circled (○) so that there is no
gap between handset and Card Tray.
・To maintain water and dust resistance, use handset with
Card Tray completely closed.
Battery Cautions
Storage
To help maintain performance and life of Internal Battery,
do not store in the following conditions (battery level
should be at approximately 40% for optimal storage).
・Full (immediately after charging is complete)
・Exhausted (too low to power on handset)
Bulges of Internal Battery
Depending on use, bulges may appear near end of battery
life; this does not affect safety.
Internal Battery Replacement
Internal Battery is a consumable item; may need to be
replaced if operating time shortens noticeably. Internal
Battery is not user replaceable; its replacement incurs fees
and requires handset submission to a SoftBank Shop or
other appropriate servicer. For details, contact a SoftBank
Shop or Customer Service.
AQUOS sense3 plus
Page 16
14
Charging with AC Adaptor
Use an AC Adaptor (USB Type-C™ quick charge AC Adaptor for
USB PD [ZSDBAS] (SB-AC20-TCPD)) (optional accessory).
For information on other peripheral devices, see SoftBank
Website.
Insert USB Type-C™ plug of AC Adaptor into External
Connection Jack
Raise plug on AC Adaptor and plug into outlet
Charging Cautions
Water Resistance
AC Adaptor is not waterproof. Never connect a USB Type-C
plug while handset or charger is wet.
Handset is water resistant; however, if a USB Type-C plug
is inserted while it is wet, liquid (tap water, beverage,
sea water, pet urine, etc.) or a foreign object adhered
to handset or a USB Type-C plug may cause overheating,
burnout, fire, malfunction, burns, etc. due to electric
shock, short-circuiting, etc.
Handling Cords
Do not pull, bend, or twist cord; may damage the cord.
About Charging Abroad
SoftBank Corp. is not liable for problems resulting from
charging handset abroad.
Charging/Notification Lamp illuminates once charging
starts.
After charging, unplug AC Adaptor from outlet and disconnect
from handset
Charging ends.
Indications while Charging
Charging/Notification Lamp
Charging/Notification Lamp illuminates red while charging;
illuminates green when charge is almost full.
・If Charging/Notification Lamp is blinking, charging is not
working properly. Make sure that you are using Charger
and products specified by SoftBank Corp. If you are using
specified products only, contact a SoftBank Shop or
Customer Service.
Lock Screen while Charging
Charging progress appears in lock screen.
・"Charging": normal charging
・"Charging rapidly": rapid charging
・"Charging slowly": low-speed charging; handset begins
low-speed charging depending on the conditions, such as
when nearly charged.
Page 17
15
Power On/Off
Powering On
Long Press Power Key until SHARP logo appears
Handset powers on, and lock screen appears after a while.
・An initial settings wizard may appear the first time handset
is powered on. For details on initial settings, see "Making
Initial Settings."
Powering Off
Power Key (Long Press)
Power off
Getting Started
Flick/up
Home Screen appears.
・
After Flickingup, enter pattern / lock no. (PIN) /
password to unlock.
Handset powers off.
AQUOS sense3 plus
Page 18
16
Making Initial Settings
When powering on the first time, an initial settings wizard
appears for optionally making Wi-Fi, Google™ account, and
other settings. Follow onscreen instructions to set items.
Insert SIM Card before powering on handset.
Making Initial Settings
Select language then START
・
To place an emergency call, Tap Emergency call .
・
To set visual assistance, Tap Vision Settings . See
"Accessibility" for details.
Set up a Google Account
・See "Google Account" for details on a Google Account.
・
If not making Google account settings, Tap SkipSkip
.
Set/check each item
Set Wi-Fi items
・Follow onscreen prompts.
・
To skip Wi-Fi settings, select Use mobile network for
setup / SKIP . Continue by following onscreen prompts.
DON'T COPY
ACCEPT
SKIP
・
Tap NEXT to copy data from another mobile, etc. Follow
onscreen prompts.
・
Tap methodNEXT to set selected method. See "Using
Fingerprint Authentication Function," "Setting Screen
to Unlock by Tracing Pattern," "Requiring Lock No. (PIN)
Entry for Unlocking Screen," "Setting Screen to Unlock with
Password," and "Using Face Authentication" for details.
・Follow onscreen prompts to set up Google Assistant.
Page 19
Google Account
17
Skip
・
After Tapping Add a card follow onscreen prompts to
save card information.
Set each itemDONE FOR NOW
Use a Google Account and get more convenience with Google
services. A Google Account is required to use some services or
fully use some applications.
Google Account Cautions
Google Account Mail Address & Password
Be careful not to forget your Google account mail address
and password.
Google Account Operations & User Interface
Operations and user interface are subject to change due to
automatic application updates or other reasons.
Creating a Google Account
In Home Screen,(Settings)
Getting Started
Handset restarts, and initial settings are complete.
・To make My SoftBank settings, after initial settings,
Drag Status Bar down, then Tap Information about My
SoftBank .
Accounts
Add account
AQUOS sense3 plus
Page 20
18
Google
Window for logging in to a Google account opens.
Create account
Set/enter date of birth and genderNext
Select a mail addressNext
・
To create another mail address, Tap Create your own Gmail
addressEnter user name (mail address)Next .
For myself
・
To create a child's account, Tap For my child , then follow
onscreen prompts.
Enter first nameEnter last nameNext
Enter passwordRe-enter passwordNext
Yes, I'm in
・
To add a phone number for security only, Tap More
options . Continue by following onscreen prompts.
・
To not add a phone number, Tap Skip .
Page 21
Next
19
Signing in to a Google Account
Check the privacy policy and terms of use I agree
In window for logging in to a Google account, enter mail
addressNext
Enter passwordNext
Getting Started
Select whether to enable data backupACCEPT
Account is created.
Continue by following onscreen prompts
You are signed in to your Google Account.
AQUOS sense3 plus
Page 22
20
Unlocking Screen
Screen Lock
After a period of inactivity, Display turns off to save battery
power (screen lock active). Screen lock prevents accidental
Touchscreen operation.
・To activate screen lock manually, Press Power Key when
Display is turned on.
Unlocking Screen
When Display is turned off (screen lock active), Power Key
Lock screen appears.
In lock screen, Flick/up
If Screen Lock Activates while Playing
Music
Music continues to play. For operation, Press Power Key to
open lock screen and use operation panel (operations may
vary depending on application).
Screen is unlocked.
・To change the unlock method for enhanced security, set
handset to require pattern drawing or lock no. (PIN)/
password entry for unlocking screen or set screen to be
unlocked with your fingerprint/face as needed. See "Using
Fingerprint Authentication Function," "Setting Screen
to Unlock by Tracing Pattern," "Requiring Lock No. (PIN)
Entry for Unlocking Screen," "Setting Screen to Unlock with
Password," and "Using Face Authentication" for details.
・
After Flickingup, enter pattern / lock no. (PIN) /
password to unlock.
Another Way to Turn On Display
Set Display to turn on when handset is picked up and
held still (Turn screen on by holding). See "Auto Sleep Off
Using Touchscreen............................................................ 22
Using Manner Mode.......................................................... 24
Using Airplane Mode.........................................................26
Text Entry.........................................................................26
Using Fingerprint Authentication Function....................27
Updating the System........................................................30
Using ROBOQUL................................................................ 31
Page 24
22
Basic Operations
Selecting Options and Navigating
Screens
Tap items, icons, onscreen keys, etc. to open assigned items.
・
To return to the previous screen, Tap.
Menu Operations
Using Touchscreen
Handset uses a touchscreen-type Display. Operate with your
fingers on Display.
About Touchscreen
In Case of Unintended Operation
If handset initiates operation without Touchscreen
(Display) being operated or does not respond after
Touchscreen being operated, Press Power Key to turn off
Display, Press Power Key again to turn on Display and then
operate handset.
Touchscreen Usage Notes
Touchscreen may not respond in these situations:
・Use with gloves/long fingernails
・Use of pens, pencils or sharp objects
・Use with objects on/against Display
・Use while wet
Touchscreen Usage Cautions
Tapat Display top or bottom for available settings
and items.
Screens may also have settings and items that are available by
Touching & Holding Display.
To prevent malfunctions, do not:
・Touch Display with wet fingers
・Use if Display is wet
If Display is wet, wipe it with a soft cloth.
・Subject Display to force/pressure
・Place a sticker or shield (commercially-available
protective film, privacy protector shield, etc.) on Display
Tap
Contact Display lightly and briefly.
Page 25
23
Touch & Hold
Contact Display lightly; release finger when screen changes.
Drag
Touch icon or other item lightly, move it where desired, and
release finger.
Pinch/Spread
Contact Display lightly, then move fingers toward each other
(Pinch) or away from each other (Spread).
Basic Operations
Flick
Contact Display lightly, then brush screen up/down or left/
right.
AQUOS sense3 plus
Page 26
24
Using Manner Mode
Mute ringtones and other handset sounds to avoid disturbing
others around you.
Manner mode setting is also accessible from Quick Settings
Window.
Manner Mode Options
Settable items are the following.
・Vibe
Ringtones and other handset sounds are muted; handset
vibrates for incoming calls/messages, etc.
・Mute
Ringtones and other handset sounds are muted; handset
does not vibrate for incoming calls/messages, etc.
Manner Mode Cautions
Camera shutter sound, video recording tones, alarms, media
sound, etc. still play even in Manner mode.
・Alternatively, to mute alarms and media sound, use "Do
not disturb." See "Sound Settings" for details.
Manner Mode (Vibe) Operations
Setting from Quick Settings
Manner mode (vibe) setting is also accessible from Quick
Settings Window.
Drag Status Bar down
Icon changes to, and handset enters Manner mode
(vibe).
Canceling Manner Mode (Vibe)
Press Volume Up/Down Key for volume bar,(Vibe)
(Mute)
Icon changes to(Manner OFF), and handset exits
Manner mode.
Activating Manner Mode (Vibe)
Press Volume Up/Down Key
Volume bar appears.
(Manner OFF)
Icon changes to(Vibe), and handset enters Manner
mode (vibe).
Page 27
Activating Manner Mode (Mute)
Press Volume Up/Down Key
Volume bar appears.
(Manner OFF)
25
Canceling Manner Mode (Mute)
Press Volume Up/Down Key for volume bar,(Mute)
Icon changes to(Manner OFF), and handset exits
Manner mode.
Basic Operations
Icon changes to(Vibe), and handset enters Manner
mode (vibe).
(Vibe) while volume bar is displayed
Icon changes to(Mute), and handset enters Manner
mode (mute).
Manner Mode (Mute) Operations
Setting from Quick Settings
Manner mode (mute) setting is also accessible from Quick
Settings Window.
Drag Status Bar down
AQUOS sense3 plus
Icon changes to, and handset enters Manner mode
(mute).
Page 28
26
Using Airplane Mode
Leaving power on, suspend signal-transmitting functions.
Activating Airplane Mode
Drag Status Bar down
Notifications Window opens.
Text Entry
Keyboards
Use onscreen keyboards for text entry.
・
Tap Text entry field for keyboard. To hide it, Tap.
・Text entry descriptions are for Google Keyboard (default
input method).
Enabling One-Handed Mode
Shrink onscreen keyboard for easier one-handed operation;
switch between Left-handed mode and Right-handed mode
as needed.
When keyboard is open, Touch & Hold/and slide
finger over/
・
Tap/to switch between Right-handed mode and
Left-handed mode.
・
Tapto disable One-handed mode.
Airplane mode activates.
Canceling Airplane Mode
From Notifications Window,
Airplane Mode Caution
Activating Airplane mode disables Wi-Fi and Bluetooth®,
interrupting corresponding transmissions.
Wi-Fi/Bluetooth® connections can be used even in
Airplane mode by enabling Wi-Fi/Bluetooth® after
activating Airplane mode; make sure that such connection/
transmission is allowed in your current location before use.
Keyboard Layout
Enter characters.
Toggle case.
Switch to number/symbol keyboard.
Enter comma. Touch & Hold to specify settings or
enable One-handed mode.
Switch to emoji/emoticon keyboard.
Enter space.
Delete characters.
Insert line break. Touch & Hold for options; enable One-
handed mode, or move to other entry fields.
Enter period. Touch & Hold for a set of other
punctuation marks and symbols.
Page 29
27
Switching Keyboards
In a text entry window,/
Entry mode is switched.
・
Tap//to toggle between alphabet entry mode
and number/symbol/emoji/emoticon entry mode.
Entering Letters
To enter Phone:
In a text entry window,
/
Phone is entered.
Using Fingerprint Authentication
Function
Fingerprint Authentication Function
Hold finger to sensor to authenticate and use handset.
Use this function to unlock screen or use it as a Back/Recents
key.
Fingerprint Authentication Function
Cautions
Observe the following when using the fingerprint
authentication function.
・Authentication is based on fingerprint characteristics.
This function may be unusable if your fingerprint
characteristics are not prominent.
・Ability to authenticate (assuming finger is held to
sensor correctly) depends on conditions of use. Saving
your fingerprint may be difficult if finger is in any of
the following conditions. Washing/wiping hands, using
different finger, saving a wider area, etc. may improve
capability.
- Wrinkled with moisture (e.g., after a bath)
- Wet with water, sweat, etc.
- Dry
- Covered with handcream, etc.
- Stained with mud or oil
- Rough or damaged (cut, sore, etc.)
- Fingerprint is faint (finger surface is worn)
- Fingerprint is deformed due to weight gain or loss
- Finger surface condition at the time of authentication
is extremely different than when fingerprint was saved
・Fingerprint authentication technology does not guarantee
successful personal authentication/verification. SoftBank
Corp. is not liable for any damages resulting from use
of handset by third party or lost opportunities to use
handset.
Basic Operations
・
To toggle case, Tap/before typing a letter. Tap
/twice to type in all capitals(). By default, the
first word of each sentence is capitalized automatically.
AQUOS sense3 plus
Page 30
28
Saving Fingerprints
In Home screen,(Settings)Security & location
Security & location menu opens.
Fingerprint
Follow onscreen prompts and set pattern / lock no. (PIN) /
password for unlocking screen
・This is a backup method for unlocking the screen if unable
to authenticate with your fingerprint.
・If method for unlocking screen is setting other than
None or Swipe , first unlock screen.
・See "Setting Screen to Unlock by Tracing Pattern,"
"Requiring Lock No. (PIN) Entry for Unlocking Screen," and
"Setting Screen to Unlock with Password" for details on
setting a method for unlocking screen.
Fingerprint settings open.
NEXT
NEXT
Hold finger to sensor until handset vibrates
・Move finger a little at a time and hold it to sensor.
・Repeat until screen appears indicating fingerprint is saved.
・If finger is already saved, use another finger.
Page 31
Fingerprint Sensor Cautions
29
DONE
Fingerprint is saved.
・
To save other fingerprints, Tap ADD ANOTHER .
Saving Fingerprints
Savable Number of Fingerprints
Save up to 5 fingerprints.
Backup Screen Unlock Methods
Make sure not to forget pattern / lock no. (PIN) /
password set as backup for unlocking screen.
Observe the following when using Fingerprint Sensor.
・Do not hit or subject handset to excessive shock. May
cause malfunction or damage. Do not scratch sensor
surface or poke with a pen, pin, or other pointed object.
・Do not place stickers on sensor surface or mark with ink.
・Dust, smudges, or other soiling on sensor may affect
authentication. Clean the Fingerprint Sensor surface from
time to time.
・Holding finger to sensor for too short/long a time may
affect authentication. Hold finger straight on sensor so
that spiral of fingerprint is in center of sensor.
・Fingerprint Sensor may not activate if you start saving
your fingerprint or performing authentication with your
finger on the sensor. Release it and retry.
Performing Fingerprint Authentication
In authentication window, hold finger to sensor
Basic Operations
Fingerprint Saving Operations
Setting/Changing Names of Saved Fingerprints
In Fingerprint settings, Tap saved fingerprintEnter
nameOK
Deleting Fingerprints
In Fingerprint settings,for saved fingerprint
YES, REMOVE
Troubleshooting
Q. Failure to save fingerprint
A. Keep your finger pressed on the sensor slightly
harder. Using a different finger may also improve
authentication performance.
Fingerprint is authenticated.
Troubleshooting
Q. Fingerprint is not authenticated
A. Remove finger then try authenticating again.
Or, Flick/up and unlock screen using backup
unlock method set when saving fingerprint.
AQUOS sense3 plus
Page 32
30
Updating the System
Check whether system updates are required via the network,
and update manually as required.
Software Update Cautions
Applications
Applications may be updated or newly added, or names,
icons, operations and user interfaces of applications may
be changed.
System Update Cautions
Observe the following before a system update.
・It may take time to update the system.
・Operate handset where signal reception is good and
without changing location. Also operate with adequate
battery charge. Signal becoming weak or Battery
becoming low during a system update may cause an
update failure (an update failure may disable handset).
Data Backup
Saved data may be lost depending on condition of handset
(malfunctioning, damaged, water seepage, etc.). It is
recommended that you back up important data before
updating the system. SoftBank Corp. is not responsible for
damages from loss of data.
AdvancedSystem update
System update window appears.
Check for update
Updating the System
Notification appears when a system update is required. Tap
the notification and follow onscreen prompts. If notification
does not appear, check whether a system update is required as
follows and update the system.
In Home Screen,(Settings)System
Continue by following onscreen prompts
System update begins.
・Use other functions during a system update.
・
After the system update proceeds, Restart now appears
at the end. Tap and complete the system update.
If Handset Does Not Restart after
Tapping "Restart now"
An update failure may disable handset. If handset is
disabled, contact your contracted SoftBank Customer
Service.
Page 33
Using ROBOQUL
31
When charging using ROBOQUL and handset is powered on,
ROBOQUL swivels when Display lights up, at start of charging,
for incoming calls, alarms, etc. If emopa is enabled, ROBOQUL
makes an audio notification as it swivels.
ROBOQUL Firmware Updates
ROBOQUL firmware is updatable. When an update is
required, "Updating ROBOQUL" appears on handset when
connected to ROBOQUL. Follow onscreen prompts to update
firmware.
・To update firmware, the following conditions are
required.
- ROBOQUL is connected to an AC Adaptor
- Handset is placed in ROBOQUL
- Handset is connected to the network
- At least 30% battery is remaining
・The firmware update will be interrupted if the battery
becomes too low or handset/AC Adaptor is removed
from ROBOQUL. ROBOQUL will become unusable if a
firmware update is interrupted. Make sure that the
required conditions are met, and then connect handset to
ROBOQUL again and complete a firmware update.
・Handset checks for firmware updates via the network
once a week when placed in ROBOQUL. Firmware is also
updated via the network. Transmission fees are incurred
when using the network.
NEXT
Basic Operations
ALLOW
・For several functions, continue in the same way.
CLOSE
Before Using ROBOQUL
You must set permissions for ROBOQUL to use functions
beforehand.
Power on handset and charge with ROBOQUL
Unlock screen with handset placed in ROBOQUL
Description of ROBOQUL appears.
ROBOQUL setting is complete.
・
To make emopa settings, Tap Set emopar , then follow
onscreen prompts.
AQUOS sense3 plus
Page 34
32
Setting ROBOQUL
Set whether ROBOQUL swivels while charging with ROBOQUL.
・When enabled while charging using ROBOQUL and handset
is powered on, ROBOQUL swivels when Display lights up, at
start of charging, for incoming calls, alarms, etc.
Lock screen appears at power on or when Power Key is
Pressed while Display is turned off (screen lock active).
From lock screen, unlock screen or quickly activate
(Camera) or Google Assistant.
By default, Wallpaper changes randomly each time lock screen
appears (Lock Photo Shuffle). Change Wallpaper for lock
screen as needed. See "Changing Wallpaper" for details.
Home Screen Layout
Desktop sheet
Place application shortcuts, folders, widgets freely.
Flick left/right to toggle sheets.
Favorites Tray
Place application shortcuts and folders freely. Activate
applications quickly from any Home Screen sheet.
Toggling Home Screen Sheets
Notifications of incoming calls/messages or from
applications, etc. appear here.
Activate Google Assistant (Flickup).
Show message set for lock screen.
Time and date appear here.
Messages and news from emopa appear here (emopa
3
area).
Unlock screen (Flick/up).
Activate(Camera) (Flickleft).
1 If Organize notifications on the lock screen is enabled,
a notification viewed the first time does not appear
the second and subsequent times. See "Applications &
Notifications" for details.
2 Appears when Lock screen message is set. See "Security
& Location Settings" for details.
3 Appear when emopa is configured. See "エモパーを
利用する (http://help.mb.softbank.jp/aquos-sense3plus/05-07-11.html)" (Japanese) for details.
1
2
Home Screen consists of several sheets.
Flick left/right to toggle Home Screen sheets.
・Adding application shortcuts and widgets in Home Screen
adds more Home Screen sheets. See "Adding Shortcuts" and
"Adding Widgets" for details.
Home Screen & App List
Most handset operations start in Home Screen or in app list.
In Home Screen, Drag Favorites Tray to top of Display for app
list and activate applications, change handset settings, etc.
(To change Home Screen, switch to another home screen app.)
Page 37
35
Navigation Bar
Tap, Drag, or Flick icons on Navigation Bar (Display bottom)
for the following functions/operations.
NameDescription
1
/
(Back key)
1
(Home
key)
2
(Home
key)
2
(Recents key)
3
(Rotate
Horizontally
key)/
(Rotate
Vertically key)
4
(Keyboard
key)
5
(Menu
key)
Tap to return to previous screen. Appears
2
1
as
2
/
for onscreen keyboard;
Tap to close keyboard.
Tap to return to Home Screen. Flick up to
open a list of recently used applications
to activate or remove them from the list.
Drag right to activate a recently used
application.
Tap to return to Home Screen.
Tap to open a list of recently used
applications to activate or remove them
from the list.
Tap to switch current screen between
3
portrait/landscape orientation.
Tap to change keyboards.
Tap to show menu.
Portrait Orientation & Landscape
Orientation
appears in Navigation Bar when handset is rotated
horizontally. Tapto switch current screen to landscape
orientation. To switch screen to portrait orientation, rotate
handset vertically and Tap.
Enable Auto-rotate screen to allow current screen to
switch to landscape orientation when handset is rotated
sideways. See "Quick Settings Window Layout," "Display
Settings," and "Accessibility" for details.
Wider Display Area
Hide Navigation Bar for wider Display. Flick bottom of Display
up for Navigation Bar when hidden.
See "Display Settings" and "Fingerprint Sensor Settings" for
details.
Handset Interface
1 Appears when Swipe up on Home button is enabled. See
"System Settings" for details.
2 Appears when Swipe up on Home button is disabled. See
"System Settings" for details.
3 Appears when Auto-rotate screen is disabled and
handset is rotated vertically/horizontally. See "Quick
Settings Window Layout," "Display Settings," and
"Accessibility" for details.
4 Appears when keyboard is open.
5 Appears for some applications.
AQUOS sense3 plus
Page 38
36
Multi-Window
Split screen to view and operate two applications.
Activate the two applications beforehand. Viewing and
operating(Address Book) and(Phone) is described as
an example.
・Viewing in Multi-Window is not available for some
applications.
Flickup
Recent apps window opens.
From application history at bottom of Multi-Window, Tap next
application
Tapped application opens at bottom of Multi-Window.
Multi-Window Operations
Switching between Applications
FlickupTap application
Exiting Multi-Window
Flick pane bar () up/down
Tap icon of application to use in history
Split screen
Capturing Screenshots
Long Press Power Key and Volume Down Key at the same time
to capture a screenshot of the current screen.
Alternatively, Long Press Power Key then Tap
Screenshot to capture a screenshot.
・May be unavailable for some applications.
・
View captured screenshots in(Photos), etc.
・Alternatively, use Clip Now and slide your finger along the
edge of Display to capture a screenshot. See "Capturing
Screenshots (Clip Now)" for details.
Multi-Window opens, and selected application opens at
top of Display.
Page 39
Changing Wallpaper
Touch & Hold open area of Home Screen
Wallpapers
Home screen / Lock screen / Home screen and lock
screen
Setting is complete.
・
Tap Home screen to set the image as Wallpaper for Home
Screen only.
・
Tap Lock screen to set the image as Wallpaper for lock
screen only.
・
Tap Home screen and lock screen to set the image as
Wallpaper for both Home Screen and lock screen.
37
Handset Interface
Tap application ( Photos , etc.)
Select image
Wallpaper Change Operations
Using Lock Photo Shuffle
Change Wallpaper randomly each time lock screen appears.
Touch & Hold open area of Home ScreenWallpapers
Lock Photo ShuffleOFF( ON)
Select folder to show with Lock Photo Shuffle ()
・All images in selected folder appear randomly.
・
Tapat right of folder name to view images in folder.
Using SHSHOW
Touch & Hold open area of Home ScreenWallpapers
SHSHOWからダウンロードFollow onscreen
prompts
・Operations may vary depending on selected item. Follow
onscreen prompts.
AQUOS sense3 plus
Page 40
38
Adding Shortcuts
In app list, Touch & Hold application and Drag to "Add to home
screen"
Release finger at location to add shortcut
Adding Widgets
Add Chrome bookmarks, Analog clock, etc. as follows.
Touch & Hold open area of Home Screen
Widgets
Shortcut is added.
・Drag to sheet visible at edge of Display to toggle sheets
and add. Drag to rightmost sheet to add one more sheet and
add.
Function Shortcuts
With some applications, Touch & Hold for shortcuts to
functions. Touch & Hold function shortcut then release
finger at location in Home Screen to add function shortcut.
Deleting Shortcuts
A list of widgets opens.
Touch & Hold widget
In Home Screen, Touch & Hold iconDrag to "Remove"
Page 41
Adding Folders
39
Drag to location to add widget
Widget is added.
・Drag to sheet visible at edge of Display to toggle sheets
and add. Drag to rightmost sheet to add one more sheet and
add.
Removing Widgets
In Home Screen, Touch & Hold widgetDrag to "Remove"
Add folders to collect icons.
・Folders can also be created in Favorites Tray and app list.
In Home Screen, Touch & Hold icon to place in folder
Handset Interface
Drag to another icon to group with
Folder is added, and two icons are saved in the folder.
Folder Operations
Changing Folder Names
In Home Screen, Tap folderTap area to enter folder
name at bottom of windowEnter folder name
・Change folder names the same way in Favorites Tray and
app list.
Placing Icons in Folder
In Home Screen, Touch & Hold iconDrag to folder
・Place icons the same way in Favorites Tray and app list.
Moving Icons Out of Folder
In Home Screen, Tap folderTouch & Hold icon
Drag it out of folder
・Move icons the same way in Favorites Tray and app list.
Deleting Folders
AQUOS sense3 plus
In Home Screen, Touch & Hold folderDrag to "Remove"
・Delete folders the same way in Favorites Tray and app
list.
・Applications in folder are also deleted.
Page 42
40
Moving Icons/Widgets
Icons can also be rearranged in Favorites Tray and app list.
In Home Screen, Touch & Hold icon/widget
Drag to target location
Icon/widget is moved.
・To a folder: Drag icon to target folder.
Making Home Screen Settings
Settable items are the following.
ItemDescription
Set whether to show dots with application
Notification
dots
Add
number on
notification
dots
Add icon to
Home screen
Display Google
app
Allow Home
screen
rotation
icons for notifications.
See "Applications & Notifications" for
details.
Set whether to show number of
notifications with notification dots.
Set whether icon is added to Home Screen
after downloading new application.
Set whether to show news, weather, etc.
at left of Home Screen.
Set whether to rotate Home Screen with
handset orientation automatically.
Touch & Hold open area of Home Screen
Home settings
Set items
Settings are complete.
Page 43
41
Icons at Display Top (Status Bar)
Indicators (new message notification, handset status, etc.)
appear at the top of Display.
Status Bar Layout
Notifications, warnings, etc. appear here. (Notification
Indicators)
Handset status and other information appear here.
(Status Indicators)
Main Notification Indicators
Notification Indicators appear on the left.
・Notification Indicators do not appear in lock screen.
Handset Interface
IndicatorDescription
Call (Dialing/Arriving/in Progress)
Call on Hold
Missed Call
New Answer Phone Message
New Voicemail
New SMS/+Message
New Email
New Gmail™
Alarm Sounding/Snoozing/Upcoming Alarm
Calendar Event Notification
Application Update Available
Application Installation Complete
Data Downloaded
Bluetooth® Data Reception Request
Mounting SD Card
Screenshot Captured
Screenshot Failed
More Notifications
AQUOS sense3 plus
Page 44
42
Main Status Indicators
Status Indicators appear on the right.
IndicatorDescription
Battery Strength
Charging
Battery Saver On
Signal Strength
No Signal (4G LTE/4G/3G)
4G LTE/4G Data in Use
3G Data in Use
Airplane Mode
Wi-Fi Connected
Bluetooth® Connected
Manner Mode (Vibe)
Manner Mode (Mute)
Wi-Fi Hotspot Tethering in Use
Do Not Disturb Set
Getting Location Information
NFC Ready
Answer Phone Set
Answer Phone Set (Message Recorded)
Alarm Set
NFC/Osaifu-Keitai® Lock Set
NFC/Osaifu-Keitai® Lock Set (SIM
Card only)
Hidden Statuses
2
Checking Notifications
(Notifications Window)
Open notifications and check handset status.
Opening Notifications Window
Drag Status Bar down
1
Notifications Window opens.
Closing Notifications Window
Drag Notifications Window up
・
Alternatively, Tap.
1 Corresponding indicator appears when handset is connected
to FDD-LTE (SoftBank 4G LTE) or AXGP (SoftBank 4G).
Between these Networks, handset connects to SoftBank 4G
whenever possible.
2 Appears when a SIM Card with NFC locked on another
mobile phone is then installed in handset.
Page 45
43
Notifications Window Layout
Notifications and active functions.
Use corresponding functions.
Manage notifications.
Delete all notifications and close Notifications Window.
1 Usable functions depend on the notification. As an
example, dial or send an SMS to the phone number of a new
call.
1
Checking Notifications
Drag Status Bar down
Handset Interface
Notifications Window opens.
Deleting Notifications
Drag Status Bar down
Notifications Window Operations
Switching between Detailed & Simple Views for
Notifications in Notifications Window
In Notifications Window, Drag notification down/up with
two fingers at the same time, or Pinch/Spread
・Unavailable for some notifications.
Making Notification Settings
In Notifications Window, Drag notification left/right
Follow onscreen instructions
・Settable items depend on the notification.
Notifying Later
In Notifications Window, Drag notification left/right
・
To change notification time, Tap, then Snoozed for
1 hour , and select time.
・Unavailable for some notifications.
Notifications Window opens.
Flick notification left/right
Notification is deleted.
・Some notifications may not be deleted.
AQUOS sense3 plus
Page 46
44
Deleting All Notifications
Drag Status Bar down
Notifications Window opens.
CLEAR ALL
Checking Notifications (Quick
Settings Window)
Tap icons to toggle functions on/off, etc.
Opening Quick Settings Window
Drag Status Bar down
Notifications Window opens.
All notifications are deleted.
・Some notifications may not be deleted.
Drag Status Bar down
Quick Settings Window opens.
・Alternatively, to open Quick Settings Window, Drag Status
Bar down with two fingers with Notifications Window
closed.
Closing Quick Settings
Drag Quick Settings up
・
Alternatively, Tap.
Page 47
Quick Settings Window Layout
45
Adding Setting Keys
In Quick Settings Window,Touch & Hold Setting
key below "Hold and drag to add tiles"Drag Setting
key to target location
Deleting Setting Keys
Adjust Display brightness.
Toggle Wi-Fi on/off.
Toggle Bluetooth® function on/off.
Toggle Mobile Light on/off.
Toggle Location on/off.
Toggle RelaxView on/off.
Toggle Manner mode (OFF / Vibe / Mute).
Toggle Airplane mode on/off.
Toggle Auto-rotate screen on/off.
Toggle VeilView on/off.
In Quick Settings Window,Touch & Hold Setting
keyDrag to "Drag here to remove"
Resetting Quick Settings Window
In Quick Settings Window,Reset
Handset Interface
Toggle Wi-Fi hotspot tethering on/off.
Toggle Reader/Writer, P2P on/off.
Toggle account sync on/off.
Indicate position of Setting key sheet.
Toggle Battery Saver on/off.
Toggle Dolby Atmos on/off.
Show cast screen.
Open Edit screen for Quick Settings Window.
Open Settings.
1 Flick Setting key area left/right to toggle sheets.
2 For details on Dolby Atmos, see "Sound Settings."
2
1
Customizing Quick Settings Window
Rearranging Setting Keys
In Quick Settings Window,Touch & Hold Setting
keyDrag Setting key to rearrange it
AQUOS sense3 plus
Page 48
46
Capturing Screenshots (Clip Now)
Slide finger along the edge of Display to capture a screenshot.
Enabling Clip Now
In Home screen,(AQUOS Useful)
AQUOS Useful menu opens.
Clip Now
Capturing Screenshots
Capture screenshots for saving as files.
・Some screens may not be capturable.
・
View captured screenshots in(Photos), etc.
Touch upper left (upper right) corner of Display
Slide finger right/down (left/down) along edge of Display
How to dial directly to make a call and answer a call, as well
as options when a call is arriving/during a call are described.
Support for VoLTE/VoLTE (HD+) and
HD Voice
Handset supports VoLTE/VoLTE (HD+) and HD Voice for
high-quality call sound. See "Using VoLTE/VoLTE (HD+)"
and "HD Voice" for details.
Placing Calls
Handset dials number. Call begins when other party
answers.
In Home Screen,(Phone)
Phone opens.
Dialpad window opens.
Use onscreen dialpad to enter number
To end call,
Call ends.
Emergency Calls
Emergency Location Report
Making emergency calls (110, 119 or 118) automatically
reports handset location to corresponding agency (police,
etc.). This system is referred to as Emergency Location
Report, and notifies location based on positioning from
base stations.
・Location Report does not incur registration/transmission
・Hiding Caller ID (using 184, etc.) cancels Location Report.
However, corresponding agency may obtain location
information in life threatening situations.
・Location Report is not sent for calls made while outside
Japan.
・Include area code for landline numbers.
・
To correct number, Tapto delete digit(s), then enter
correct number.
After Making an Emergency Call with Reject
Call Enabled
Reject call is disabled for about two hours to receive calls
from corresponding agency. To manually enable Reject call
again after making an emergency call:
In Home Screen,(Phone)SettingsCall
blockingRESTORE PREVIOUS SETTINGS TO BLOCK
CALLS.YES
Page 55
53
Calling Emergency Number When
Handset Screen is Locked
In lock screen, Flick upEmergencyEnter number
for emergency service
・Use if method for unlocking screen is setting other than
None or Swipe . See "Setting Screen to Unlock by
Tracing Pattern," "Requiring Lock No. (PIN) Entry for
Unlocking Screen," and "Setting Screen to Unlock with
Password" for details on screen lock methods.
Troubleshooting
Q. Call does not connect
A. Did you dial all digits for the number? Dial all digits
for numbers starting with a "0" area code, etc.
A. Is the signal weak? Change locations and call again.
Emergency Call Cautions
Answering Calls (Display Off)
Flickup when call is arriving
Phone
Call connects.
To end call,
Areas Where Usable
Emergency calls from handset can be made only in SoftBank
service areas.
Airplane Mode
Note that emergency calls cannot be made in Airplane
mode. Drag Status Bar down and cancel it.
Phone Window Layout
Call ends.
Missed Calls
For unanswered calls, notification appears in lock screen.
Search field.
Search contacts. Tapto voice search.
Show favorites.
Show dialpad.
Open menu.
Show contacts.
Show call history.
Notification
・Tap notification twice to check missed call records and
call back as needed.
・
When screen is unlocked,appears on Status Bar.
Drag Status Bar down for Notifications Window, then
Tap notification. When CALL BACK / MESSAGE appear
below notification, Tap to call back or send SMS.
AQUOS sense3 plus
Page 56
54
Arriving Call/Answer Phone Operations
Answering with Answer Phone
As call is arriving, FlickupAbsence Memo
・
When screen is unlocked, Incoming callFlick
upAbsence Memo .
Playing Back Answer Phone Messages
In lock screen, Tap notification twiceTap message
・When screen is unlocked, Drag Status Bar down for
Notifications Window, then Tap notificationTap
message.
・
To stop playback, Tap Pause .
Editing Subjects of Answer Phone Messages
In Home Screen,(Phone)Settings
CallsAnswer phoneAnswer phone list
Touch & Hold messageEdit SubjectEnter subject
nameOK
Answering Calls (Display On)
When call is arriving, ANSWER
Call connects.
To end call,
Copying Answer Phone Messages to Internal
Storage/SD Card
In Home Screen,(Phone)Settings
CallsAnswer phoneAnswer phone list
Touch & Hold messageExportAQUOS
sense3 plus / SD cardSelect where message is
savedSELECTOK
・Before saving to internal storage, show internal storage.
Rejecting Arriving Calls
As call is arriving, Flickdown
・
When screen is unlocked, Tap DECLINE .
Not Answering Call and Sending SMS
As call is arriving, FlickupTap message to send
・
When screen is unlocked, Incoming callFlick
upTap message to send.
・
Tap Write your own... to create and send message.
Call ends.
Forwarding Arriving Calls
As call is arriving, FlickupForwarding
・
When screen is unlocked, Incoming callFlick
upForwarding .
・Set a phone number to forward calls to beforehand. See
"Call Forwarding" for details.
Stopping Ringtone and Vibration
As call is arriving, Volume Up/Volume Down Key
Page 57
Call Window Layout/In-Call Operation
Other party photo.
Other party name/number.
HD Voice ()/HD+ Voice () call in progress.
Mute own voice.
Show dialpad.
Add call.
End call.
Call time.
Use Speakerphone.
Place call on hold.
Open menu.
55
Copying Voice Memos to Internal Storage/SD
Card
In Home Screen,(Phone)Settings
CallsAnswer phoneVoice Memo List
Touch & Hold messageExportAQUOS
sense3 plus / SD cardSelect where message is
savedSELECTOK
・Before saving to internal storage, show internal storage.
Phone
Troubleshooting
Q. Difficulty with call
A. It may be difficult to make a call in a location with
noise.
A. Check the call volume when using Speakerphone. It may
be difficult to make a call with a raised call volume.
Q. The other party cannot hear me
A. Are you covering Mic/Recorder Mic on the bottom
surface of handset with your finger, etc.? Make sure
not to cover Mic/Recorder Mic.
A. Have you muted handset? The other party cannot hear
you if handset is muted.
In-Call/Voice Memo Operations
Adjusting Call Volume
During call, Volume Up/Down Key
Recording Call (Voice Memo)
During call, MenuVoice Memo
・
To end recording, Tap Stop .
Playing Back Voice Memos
In Home Screen,(Phone)Settings
CallsAnswer phoneVoice Memo ListTap
Voice Memo
・
To stop playback, Tap Pause .
Editing Subjects of Voice Memos
In Home Screen,(Phone)Settings
CallsAnswer phoneVoice Memo List
Touch & Hold messageEdit SubjectEnter subject
nameOK
Q. Sound experiences popping during a call
A. Are you moving location during a call? Popping may
occur when switching areas for a better signal. This is
not a malfunction.
AQUOS sense3 plus
Page 58
56
Using VoLTE/VoLTE (HD+)
VoLTE (Voice over LTE) is a system enabling voice calls over
LTE networks. Compared to voice calls over conventional 3G
connections, high-sound quality calls and reduced time until
ringtones sound are possible. VoLTE (HD+) provides a clearer
and more natural quality call than conventional VoLTE.
・VoLTE/VoLTE (HD+) are available when the counterpart
model is respectively a VoLTE- or VoLTE (HD+)-compatible
model from SoftBank/Y!mobile. In addition, it is necessary
for both handset and the counterpart model to be within
the SoftBank 4G LTE (FDD LTE) service area, with "4G
(recommended)" and "Enhanced 4G Mode" enabled.
・See "Service web page (https://www.softbank.jp/mobile/
service/global/overseas/volte/)" (Japanese) for information
on countries and regions where VoLTE international roaming
is supported.
Disabling VoLTE/VoLTE (HD+)
In Home Screen,(Settings)Network & internet
Mobile networkAdvancedEnhanced 4G
Mode ()
・
Tap Enhanced 4G Mode to toggle on ()/off
().
Optional Services
Use these optional services for voice calls:
Optional Services
The following optional services are available.
ServiceDescription
Call
Forwarding
Voicemail
Call Waiting
Group Calling1Merge multiple calls.
Notify Caller
ID
Call Barring
1 Requires separate subscription.
Divert all/unanswered calls to a preset
number.
Divert all/unanswered calls to Voicemail
Center; access messages via handset/
touchtone phones.
1
Answer calls during a call.
Send or hide your number when placing
calls.
Restrict incoming/outgoing calls by
conditions.
VoLTE/VoLTE (HD+) Cautions
VoLTE/VoLTE (HD+) use 4G network service, and are
unavailable when 4G network service is disabled on
handset. If VoLTE/VoLTE (HD+) are unavailable, follow
the steps below to check whether 4G network service is
enabled ().
In Home Screen,(Settings)Network & internet
Mobile networkAdvancedPreferred
network type
・
If disabled (), Tap 4G (recommended) to enable it
().
HD Voice
HD Voice supports a wide range of audio tones for clearer,
more natural-quality voice calls.
・Available when the counterpart model is an HD Voice-
compatible model from SoftBank/Y!mobile.
・HD Voice is compatible with VoLTE and 3G network. Use HD
Voice with VoLTE for voice calls of even higher quality.
Page 59
Call Forwarding
In Home Screen,(Phone)
57
Voice Mail / Call ForwardingCall Forwarding ON
Phone
Phone opens.
SettingsCalls
Call service settings
Ring TimeTap the ring time
Telephone Number of Forwarding DestinationTap
the phone number input areaEnter the forwarding
destination phone numberREGISTER
Call service settings open.
Voice Mail / Call Forwarding
Voice Mail/Call Forwarding opens.
CONFIRM
Call Forwarding is set.
AQUOS sense3 plus
Page 60
58
Canceling Call Forwarding
In Voice Mail/Call Forwarding screen, tap Voice Mail /
Call ForwardingAll OFFCONFIRM
Voicemail
In Home Screen,(Phone)
Phone opens.
SettingsCalls
Call service settings
Call service settings open.
Voice Mail / Call Forwarding
Voice Mail/Call Forwarding opens.
Page 61
Canceling Voicemail
59
Voice Mail / Call ForwardingVoice Mail ON
Ring TimeTap the ring time
In Voice Mail/Call Forwarding screen, tap Voice Mail /
Call ForwardingAll OFFCONFIRM
Phone
CONFIRM
Voicemail is set.
Voicemail
Voicemail and Answer Phone
Voicemail and Answer Phone differ mainly in the following
ways.
・Voicemail: Messages are held at the Voicemail Center.
Messages are held even when handset is not turned on
or outside a service area. Message playback is subject to
your subscription call charges.
・Answer Phone: Messages are held on handset. Use Answer
Phone only when handset is turned on or within a service
area.
When New Message is Recorded
appears on Status Bar. To play message, Tap
Voicemail in Notifications Window, then follow voice
guidance.
AQUOS sense3 plus
Page 62
60
Call Waiting
Requires separate subscription.
In Home Screen,(Phone)
Phone opens.
SettingsCalls
When Call Arrives during Another Call
A tone sounds; Flickup to begin call.
Canceling Call Waiting
for "Call Waiting" () in all service settings
screen
Call service settings
Call service settings appear.
for "Call Waiting" ()
Call Waiting is set.
Page 63
61
Group Calling
Requires separate subscription.
During a call, Add call
Phone opens.
Enter number
Notify Caller ID
In Home Screen,(Phone)
Phone
Phone opens.
SettingsCalls
Call is added.
・
Alternatively, in Phone,Tap contactTap number.
・
Alternatively, in Phone,Tapfor Call History
entry to add.
When call connects, Merge
Group Calling starts.
Additional settings
Additional settings appear.
Caller IDNetwork default / Hide number / Show
number
AQUOS sense3 plus
Caller ID is set.
・
Set to Network default to notify number.
Page 64
62
Call Barring
Restrict outgoing/incoming calls and SMS messages.
・When attempting to place/send a call/SMS while calling is
restricted, a message appears. Message may take time to
appear in some areas.
RestrictionDescription
- Barring of All Outgoing Calls
Restrict all outgoing calls.
- Barring of All Outgoing International
Calls
Restrict international calls; while outside
Japan, calls within current country are
Outgoing Call
Barring
Incoming Call
Barring
allowed.
- Barring of All Outgoing International
Calls except Japan
Restrict international calls; while outside
Japan, calls within current country and to
Japan are allowed.
- Stop Barring of Outgoing calls
Cancel all outgoing call restrictions.
- Barring of All Incoming Calls
Restrict all incoming calls.
- Barring of All Incoming International
Calls
Reject calls while outside Japan.
- Stop Barring of Incoming Call
Cancel all incoming call restrictions.
Call service settings
Call service settings opens.
Outgoing Call Barring / Incoming Call Barring
Follow onscreen prompts
In Home Screen,(Phone)
Phone opens.
SettingsCalls
Restriction is set.
Call Barring Operations
Setting Call Barring
In Call service settings, Outgoing Call Barring /
Incoming Call BarringTap barring method
Canceling All Outgoing Call Restrictions
In Call service settings, Outgoing Call BarringStop
Barring of Outgoing Call
Canceling All Incoming Call Restrictions
In Call service settings, Incoming Call BarringStop
Barring of Incoming Call
Troubleshooting
Q. Calling is not barred
A. Are you using Call Forwarding or Voicemail? Calling
may not be barred even if Barring of All Outgoing Calls
and Barring of All Incoming Calls are set.
Page 65
63
Handset Phone Number
Checking Your Phone Number
In Home Screen,(Settings)
Settings appear.
・Handset number is shown below "Phone number."
Making Phone Settings
Making Phone Settings
Check phone information and make settings. Settable items
are the following.
ItemDescription
- Sort by
Change the sort order of callers/callees in
Display
options
Sounds and
vibration
Quick
responses
Calls
Call blockingSet numbers to block calls from.
Voicemail
About
Call History.
- Name format
Change how caller/callee names are
displayed in Call History.
- Phone ringtone
Set Phone ringtone.
- Also vibrate for calls
Enable vibration when calls arrive.
- Keypad tones
Enable confirmation tones when Tapping
dialpad.
Edit an SMS message for when unable to
answer a call.
- Additional settings
Set caller IDs.
- Answer phone
Set Answer phone.
- SoftBank call settings
Set international calling and call barring.
- Call service settings
Set rules for incoming and outgoing
calls, Voice Mail, Call Forwarding and Call
Waiting.
- Notifications
Make notification settings.
- Advanced Settings
Check Voicemail settings.
Check build version, open source license,
privacy policy, and terms of service.
Phone
In Home Screen,(Phone)
Phone opens.
AQUOS sense3 plus
Page 66
64
Settings
Phone settings open.
Set each item
Setting is complete.
Phone Setting Operations
Setting Ringtone
In Phone settings, Sounds and vibrationPhone
ringtoneTap ringtoneOK
Setting/Canceling Answer Phone
In Phone settings, CallsAnswer phoneAnswer
phoneMannermode / ON / OFF
Checking Answering Message for Answer Phone
In Phone settings, CallsAnswer phone
Answering message confirmTouch & Hold "Answering
message content"Play
Setting Answering Time for Answer Phone
In Call settings, CallsAnswer phoneAnswer
time settingSelect timeSET
・If arriving calls are disconnected before answer time that
is set for Answer phone passes, disable Call Forwarding
or Voicemail. See "Call Forwarding" and "Voicemail" for
details on Call Forwarding or Voicemail.
Barring Calls from Specified Numbers
In Call settings, CallsSoftBank call settings
Reject callSpecified numbersADD A NUMBER
Enter the numberBLOCK
Setting Whether Handset Vibrates for Incoming
Calls
In Phone settings, Sounds and vibrationAlso
vibrate for calls
・
Tap Also vibrate for calls to toggle on () / off
().
Setting Whether Dialpad Tones Sound
In Phone settings, Sounds and vibrationKeypad
tones
・
Tap Keypad tones to toggle on () / off ().
Editing SMS Message to Send to Caller when
Unable to Answer
In Phone settings, Quick responsesTap message to
editEnter messageOK
Checking Storage Available and Recordable
Number of Answer Phone Messages and Voice
Memos
Rejecting Calls from Unnotified Numbers
In Call settings, CallsSoftBank call settings
Reject callNumber not sent ()
In Phone settings, CallsAnswer phoneCurrent
storage status
Page 67
Address Book
Save phone numbers and mail addresses as well as birthdays,
nicknames, etc.
Set ringtones for each contact as needed.
Address Book Caution
Contacts may be altered/lost if handset is left uncharged
or due to accidents, malfunctions, repairs, handset
upgrade/replacement, mishandling, etc. Back up important
contacts and other data regularly. SoftBank Corp. is not
liable for any damages resulting from loss/alteration of
contacts.
Adding New Contacts
In Home Screen, Drag Favorites Tray to top of Display
In Home Screen, Drag Favorites Tray to top of Display
(Tools)(Email)
Message list opens.
Saving Current Message as Draft
While creating message,Save draft
Discarding Current Message
In message composition window,Discard
DISCARD
Adding Quick Response Text
In message composition window,Insert quick
responseSelect text
Opening New Email
When message arrives, new message notification appears in
lock screen.
75
Messaging
Message composition window opens.
Enter recipient, subject and text
Message is sent.
In lock screen, Tap new message notification twice
Message window opens.
・For two or more new messages, message list opens; Tap one.
・
When screen is unlocked,appears on Status Bar. Drag
Status Bar down, then Tap notification.
Operations when Creating Message
Adding Cc/Bcc Recipients
In message composition window,in Recipient field
Enter recipient
Attaching Files
In message composition window,Attach file
Select where file is savedSelect file
AQUOS sense3 plus
Page 78
76
Opening Email
In Home Screen, Drag Favorites Tray to top of Display
(Tools)(Email)
Message list opens.
Tap message
Syncing Accounts Manually
In message list, Drag down
・Sync sent and received messages manually at any time
regardless of the automatic sync settings.
Message window opens.
Operations when Opening Messages
Replying to Messages
In message window,Create message
・
To reply to all,Reply all .
Forwarding Messages
In message window,ForwardCreate message
Resetting Messages as Unread
In message window,
・Alternatively, in message list, Tap icon for message to
reset as unread ().
Deleting Messages
In message window,OK
・Alternatively, in message list, Tap icon for message to
delete ()OK .
Page 79
Internet
Using the Internet (Chrome™).........................................78
Page 80
78
Using the Internet (Chrome™)
Use Chrome simply by entering words to search for or URLs.
TLS
TLS (Transport Layer Security) is a protocol for encrypting
sent/received data. While in a screen connected by
TLS, data is encrypted to safely send/receive private
information, credit card numbers, corporate secrets,
etc., and provide protection against online threats
(eavesdropping, falsification, impersonation, etc.).
TLS Caution
When opening a secured page, users must decide as their
responsibility whether or not to open the page with use
of TLS. SoftBank Corp. and the Certification Authorities
Symantec Website Security G.K. and Cybertrust make no
guarantees whatsoever to users regarding security of TLS.
Using Chrome
Enter search string or URL
Search results appear or a Website opens.
Chrome Operations
Opening New Tabs
Open multiple Websites in different tabs to switch
between them easily.
・SoftBank folder and bookmarks in SoftBank folder cannot
be moved.
Deleting Bookmarks
In Chrome,Bookmarksfor bookmark to
deleteDelete
Checking Browsing History
In Home Screen,(Chrome)
Chrome activates.
History
History window opens.
Tap record
Website opens.
Page 83
Setting Chrome
81
Make Chrome settings. Settable items are the following.
ItemDescription
Sign in to
Chrome
Search engineSelect a search engine.
Passwords
Payment
methods
Addresses and
more
NotificationsMake notification settings.
Privacy
AccessibilitySet text size, etc.
Site settings
LanguagesMake language settings.
Lite mode
Downloads
About Chrome
Sign in to your Google Account and make
settings for bookmarks, history, etc. View
account information.
Enable or disable the saving of user
names and passwords by websites,
confirm/delete websites that have saved
passwords, etc.
Set whether to automatically enter
payment information in forms, and edit
credit card information.
Set whether to automatically enter
information such as residence addresses,
phone numbers and mail addresses in
forms, and edit residence addresses and
other information.
Set whether to show suggestions for an
access error, whether usage and error
reports are sent, etc.
Set whether to allow cookies, enable
JavaScript, etc.
Set whether to use the Google server for
faster page loading.
Set save destination, etc. for downloaded
data.
View version information, etc. about
Chrome.
SettingsSet items
Settings are complete.
・For some items, additional settings may appear when
Photos and videos taken with handset are saved to handset
(internal storage).
To save them on SD Card, insert SD Card before using Camera,
then change save location as follows.
In Home Screen,(Camera)COMMONSave
ToSD card
Camera Cautions
General Use
Mind etiquette when using Camera.
Test Camera before shooting special moments.
Do not use Camera in places where shooting is prohibited.
Shot images may not be used/transferred without
copyright holder (photographer) permission, except for
personal use.
If Lens Becomes Dirty
Fingerprints/smudges on lens prevent capturing of clear
images. Wipe lens with a soft cloth beforehand.
Avoid Exposure to Direct Sunlight
Drag shooting mode at bottom to left/right and select
Picture
Photo Viewfinder appears.
Aim Back Camera at subject
Be careful not to expose lens to direct sunlight for long
periods. May discolor color filter and affect color of
images.
Mobile Light Warning
Do not turn on Mobile Light close to eyes, look directly at
Mobile Light when on, or shine Mobile Light in eyes; may
affect eyesight or cause other problems.
Capturing Photos
In Home Screen,(Camera)
・Drag up/down to adjust brightness.
・Pinch/Spread to zoom out/in. Also drag adjustment bar
shown during Pinch/Spread left or right to zoom out/in.
・
Tapfor Wide-Angle Back Camera; capture with wide-
angle of view. Tapfor Standard Back Camera; capture
with standard angle of view.
・With Back Camera, Tap subject for focus lock. To cancel,
・If focus is locked, alternatively, Tap the focus mark to
capture photo.
・
To capture continuously, Touch & Holdor Press Volume
Up/Down Key for 1+ seconds.
Page 87
85
Troubleshooting
Q. Camera exits suddenly
A. Continuing to use Camera while handset is warm causes
warning to appear, after which Camera saves captured
image data and exits.
A. Camera exits automatically after a period of inactivity.
A. Camera automatically exits when battery level is very
low. Charge handset adequately before using Camera.
Q. Images are dark/grainy
A. Is there a strong light near the subject, or a strong
light source in the screen? Avoid letting a strong light
source (the sun, light, etc.) in the screen. Leaving
handset in a warm place for a long time or where
Camera is in direct sunlight for a long time may affect
image quality.
Q. Images captured with Mobile Light appear whitish
A. A finger or cover near the lens can reflect light from
Mobile Light and cause captured images to appear
whitish.
Photo Viewfinder (Back Camera) Layout
Recognition icon
Subject recognized by AI (person (), dog (), cat
(), cuisine (), flowers (), evening view (),
fireworks (), B&W ()).
Camera switch
Change angle of view (standard/wide-angle).
Tapfor Standard Back Camera; capture with
standard angle of view ().
Tapfor Wide-Angle Back Camera; capture with
wide-angle of view ().
Google Lens™
Use Google Lens to copy text captured with Camera and
to search for products.
Shooting menu
Change shooting scene.
Front/Back Camera switch
Switch between Front Camera and Back Camera.
Mobile Light
Change Mobile Light setting.
Settings
Access various Camera settings.
HDR indicator
Appears when HDR function activates for capture.
Capture photo
Photos/thumbnail
Open Photos, or view immediately captured photo/video.
Shooting mode
Drag left/right to change shooting modes ( Video /
Picture / Time Lapse ).
1
2
Camera
1 Appears during AI Auto .
2 Appears when Auto HDR is enabled.
・Indicators shown in Viewfinder and available functions/
settings vary depending on Camera type and shooting mode/
scene.
AQUOS sense3 plus
Page 88
86
Photo Viewfinder (Front Camera)
Layout
Selfie Flash
Enable so entire screen fires in place of a flash; people
appear bright in selfies taken at night.
Adjustment bar
Set manually.
Bokeh background soft focusing
AQUOS beauty
Set whether to use AQUOS beauty function.
AQUOS beauty setting icon
Adjust skin tone, diminutive features, color, brightness,
and large eyes.
Reset icon
Reset manual adjustments.
Zoom ratio
1 Appears after Tapping Bokeh icon or AQUOS beauty setting
icon.
2 Appears when Flicking right edge of Display to the left.
3 Appears when AQUOS beauty function is enabled.
A. Continuing to use Camera while handset is warm causes
warning to appear, after which Camera saves captured
image data and exits.
A. Camera exits automatically after a period of inactivity.
A. Camera automatically exits when battery level is very
low. Charge handset adequately before using Camera.
Q. Images are dark/grainy
A. Is there a strong light near the subject, or a strong
light source in the screen? Avoid letting a strong light
source (the sun, light, etc.) in the screen. Leaving
handset in a warm place for a long time or where
Camera is in direct sunlight for a long time may affect
image quality.
Mobile Light
Change Mobile Light setting.
Front/Back Camera switch
Switch between Front Camera and Back Camera.
AI Live Story
If AI Live Story is enabled () when a given length
of video is captured, AI adds effects and BGM to
attractive scenes to create a short movie.
Shooting menu
Change shooting scene.
Settings
Access various Camera settings.
Camera switch
Change angle of view (standard/wide-angle).
Tapfor Standard Back Camera; capture with
standard angle of view ().
Tapfor Wide-Angle Back Camera; capture with
wide-angle of view ().
Capture video
Photos/thumbnail
Open Photos, or view immediately captured photo/video.
Shooting mode
Drag up/down to change shooting modes ( Video /
Picture / Time Lapse ).
Google Lens
Use Google Lens to copy text captured with Camera and
to search for products.
1 Unavailable when video size is 4K(3840×2160) / FULL
HD(1920×1080)60fps .
2 If AI creates a short movie with AI Live Story enabled
(),appears. Tap icon to open Short Movie Playback
screen.
・Indicators shown in Viewfinder and available functions/
settings vary depending on Camera type and shooting mode/
scene.
1
2
Camera
Q. Images captured with Mobile Light appear whitish
A. A finger or cover near the lens can reflect light from
Mobile Light and cause captured images to appear
whitish.
AQUOS sense3 plus
Page 90
88
Video Viewfinder Layout While
Capturing
Captured photo
Appears after capturing photo while capturing a video.
Shooting time
Battery level
Confirm short movie creation
Flashes when a short movie is finalized.
Zoom ratio
Stop capturing
Photo capture
1 Operates when AI Live Story is enabled ().
2 Photo capture unavailable when video size is FULL HD
(1920×1080)60fps .
2
1
・Indicators shown in Viewfinder and available functions/
settings vary depending on Camera type and shooting mode/
scene.
Page 91
Music & Images
Listening to Music (YT Music)........................................ 90
Enjoy a broad range of music contents including official
albums and music videos. Playing back music saved to internal
storage/SD Card is described as an example.
Sign in to a Google Account first, and in YT Music,
SettingsLibrary & downloads and enable Show device
files .
Play Music
Playing High-Resolution Audio
Handset supports high-resolution audio playback.
Handset also supports Qualcomm® aptX™ HD audio.
Icons below appear according to shooting mode, settings,
etc. used.
・
appears with number of 2 or more photos taken while
capturing video. Tap a photo in Photos and then Tap
Match with movie in file view window to play video or
photo.
・
appears for photos captured with Intelligent Framing.
Tap photo for original image (captured photo) and
a recommended image (intelligently framed photo)
to appear at bottom of Display. Flick left/right in
thumbnails to toggle original and recommended images.
may not appear immediately after activating handset.
Wait a while and then re-open photo.
Photo/Video Viewing Operations
Selecting Multiple Files
In Photos,SelectTap photo/video ()
・
Tap photo/video to toggle selected ()/unselected
().
・
Alternatively, Touch & Hold a photo/video ()Tap
another photo/video.
Changing Photos Window Layout
Adding Photos/Videos to Album
In file view window,Add to albumFollow
onscreen prompts
・
Ifis hidden, Tap Display first.
Deleting Photos/Videos from Handset
In file view window,Delete from device
Follow onscreen prompts
・Backup data in Google online storage is not deleted.
・
Ifis hidden, Tap Display first.
Archiving Photos/Videos
In file view window,Move to ArchiveFollow
onscreen prompts
・
In Photos, TapArchive to view archived photo/
videos.
・
Ifis hidden, Tap Display first.
Saving Images as Wallpapers or in Address Book
Contact Photos
In file view window for photo,Use asFollow
onscreen prompts
・
Ifis hidden, Tap Display first.
93
Music & Images
In Photos,LayoutComfortable view / Day
view / Month view
・Alternatively, in Photos, Pinch/Spread.
Creating an Album, Shared Album, Movie,
Animation, or Collage
In Photos,Album / Shared album / Movie /
Animation / CollageFollow onscreen prompts
Checking Photo or Video Details
In file view window,Info
・
Ifis hidden, Tap Display first.
Using Slideshow
In file view window,Slideshow
・To stop slideshow, Tap image.
・
Ifis hidden, Tap Display first.
Saving Photos/Videos on Handset
In file view window,Save to device
・
Ifis hidden, Tap Display first.
Printing Photos
In file view window for photo,PrintFollow
onscreen prompts
・Also use to save images to internal storage or SD Card in
PDF format.
・
Ifis hidden, Tap Display first.
Enabling/Disabling Loop Video Playback
In file view window for video,Loop video
・
Tap Loop video to toggle on ()/off ().
・
Ifis hidden, Tap Display first.
Saving Frame from Video as Photo (Atokara
Capture)
In file view window for video,Edit in Atokara
CaptureDragleft/right to view frame
to capture
Shown frame is saved to internal storage/SD Card.
・
Ifis hidden, Tap Display first.
・
To move backward/forward frame by frame, Tap/
or Drag frame left/right.
・To save the current image as a photo and share it, Tap
. Follow onscreen prompts.
・Install additional application capable of image editing to
change shown content.
AQUOS sense3 plus
Page 96
94
Selecting Video Playback Application
In file view window for video,View inTap
application
Zooming In/Out on Photos
In file view window for photo, Tap Display twice or Pinch/
Spread
Checking Photos Captured While Capturing a
Video
In file view window for video, Match with image
Flick screen up
・
If Match with image is hidden, Tap Display first.
Page 97
Application Basics
Confirmation when First Activating Applications......... 96
Set the operation of applications when activating for the
first time.
The type and content of a confirmation differ with the
application. The following explains two types of confirmation:
First things first and Battery optimization.
Setting Required Permissions for
Applications
DENY / ALLOW
Permit applications to use data on handset, Camera, etc.
Activating(Email) for the first time is described as an
example.
・An application may not function correctly if permission to
use it is not set.
In Home Screen, Drag Favorites Tray to top of Display
(Tools)(Email)
Setting is complete.
・
Normally, select ALLOW to permit usage of the function.
・For several functions, continue in the same way.
Other Ways to Set Required Permissions
for Applications
Enable Battery optimization to prevent applications from
running while Display is turned off (except while charging).
・Confirmation for optimizing Battery appears when launching
or making settings for some applications. Normally, ignore
Battery optimization. Optimizing the Battery may cause
some applications to exit.
・If Battery optimization is enabled, applications are disabled
while Display is turned off (except while charging).
Applications/functions may become unusable or other
unintentional operation may occur.
Page 99
Setting Battery Optimization in
Settings
In Home Screen,(Settings)Apps & notifications
AdvancedSpecial app access
97
Tap application nameOptimize / Don't optimize
DONE
Setting is complete.
Battery optimization
Not optimizedAll apps
Application Basics
AQUOS sense3 plus
Page 100
98
Applications
Function Shortcuts
Activating Applications
In Home Screen, Drag Favorites Tray to top of Display
Tap application
With some applications, Touch & Hold for shortcuts to
functions. Tap function shortcut to launch function
directly.
Exiting Applications
In any application, Taprepeatedly
Application activates.
・If confirmation appears, follow onscreen prompts.
・Some applications can be activated from Home Screen.
Using Applications
Setting Required Privileges for Using
Applications
Some applications first require permission to access
handset data or privileges to access important functions
such as photographing.
Confirmation appears for applications requiring permission
when first activated. Follow onscreen prompts.
・See "Confirmation when First Activating Applications" for
details.
Home Screen returns and application exits.
・
Home Screen also returns when Tappingon Navigation
Bar, but application does not exit. Exit it from recent apps
window. See "Opening Recent Apps Window" for details.
Where to Obtain Applications &
Updates
Use Google Play™ to obtain new applications or update
installed ones. See "Adding/Deleting Applications" for
details.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.