Sharp AQUOS R2 SHV42 Settings Manual
SHV42
Setting Guide
Thank you for buying the “AQUOS R2 SHV42”
(simply called the “product” from here on).
This manual describes settings for using the
product.
* For illustrations and descriptions in this manual, refer to
“Basic Manual” available on the au homepage.
* Descriptions in this manual are based on Android™ version
8.0.
* The company names and product names appearing in this
manual are trademarks or registered trademarks of their
respective holders.
* Phone illustrations and screen shots are for descriptive
purposes only, and may differ from the actual product.
June 2018, 1st Edition
Sold by: KDDI CORPORATION,
OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: SHARP CORPORATION
Using “Online Manual” (Japanese)
You can check “Online Manual” (Japanese) that
describes detailed of various functions by
operating the product as follows.
On the App list screen,
[Support].
Also, you can check “Online Manual” (Japanese)
on the au homepage.
https://www.au.com/online-manual/shv42/
[取扱説明書] (Online
Manual) (Japanese).
濡れた状態での充電は、
異常な発熱・焼損などの
原因となり大変危険です。
■ STEP2: Data Transfer/Wi-Fi® Connection Settings
You may skip the steps here for transferring data from another device/making Wi-Fi® Connection settings.
By using “Copy your data”, you can transfer data from an old device etc.
[Set up as new].*
* To transfer data from another device, select “Copy your data” and follow the on-screen instructions.
[Use mobile network for
setup].
Confirm the contents
and [CONTINUE].
■ STEP3: Google Account Settings
You can use applications provided by Google Inc. such as “Play Store” and “Calendar” by setting up a
Google account. You can use the product without a Google account set, but in such case some
applications are not available.
The main setting items are as follows.
When using the product
●The battery is built into the product, and cannot be removed by the customer.
●To force the power off, hold f down for 8 or more seconds (Release your finger after the product
vibrates to turn the power off).
Basic Operations
For detailed operations, refer to the Online Manual (Japanese).
You can switch the display language for function names and other items to English.
●On the home screen → “App list screen” → [設定] (Settings) → [システム] (System) → [言語と入力]
(Languages & input) → [言語] (Languages) → [言語を追加] (Add a language) → [English] → [United
States] → Long touch “English (United States)” and drag it to the top of the list.
① Display
Touch it directly with your fingers to operate.
② ^ (Back key): Tap it to return to the previous screen.
③ # (Home key): Tap it to display the home screen.
④ $ (Recent Apps key): Tap it to display Recent Apps screen.
⑤ f (Power key): Hold it down to turn the power on. Hold it
down while the power is turned on → [Power off] to turn it off.
Unlocking the screen
Unlock the screen by swiping “ ”
up.
●If a password, etc. is set for the
screen lock, it is displayed as
”.
“
Register your Google account (user ID) and any characters which you want to use as a
Username
mail address. You can register any user name but you cannot set the same user name as
another user's.
Password Register the password for using your Google account.
●The Google account setup screen is displayed when you also activate an application for which a
Google account is required for the first time.
●Depending on how you operate, screens other than those below may be displayed.
[Create account]
→ [For myself].
Enter your “First name”
*2
and “Last name”
Enter basic information
→ [NEXT].
Enter your “Username”
→ [NEXT].
*1
→ [NEXT].
Displaying the App list screen
On the AQUOS Home
screen, swipe the screen up
The app list screen is
displayed.
■ App Permissions Settings
When you activate applications/functions to access to the function or information of the product for the
first time, the confirmation screen for requesting the permission of access authority is displayed.
When the confirmation screen is displayed, check the displayed contents carefully and follow the on-screen instructions.
●The explanation screen for permissions may be displayed depending on the applications/functions.
Also, multiple confirmation screens may be displayed or the displayed contents may differ. Check the
displayed contents carefully and follow the on-screen instructions.
If you deny the permission, the application/function may not be activated or the use of function may be restricted.
●In this manual, some description of the confirmation screens may be omitted.
Enter the password
→ [NEXT].
*1 If you already have a Google account, enter the e-mail address.
*2 To create an account for your child, select [For my child] and follow the on-screen instructions.
Confirm the contents
→ [YES I'M IN].
Confirm the contents
→ [I AGREE].
■ STEP4: Google service Settings etc.
Set other items such as Google service, screen unlock.
[NEXT].
Initial Settings
The Google™ initial settings screen is displayed automatically when you turn the power on for the first
time. Follow the on-screen instructions to set each function.
■ STEP1: Language Setting
[日本語（日本）].
Select the language.
[LET'S GO].
[SKIP].
*1
[SKIP ANYWAY].
Confirm the contents of
Google services
→ [I AGREE].
[YES I'M IN].
*1 To set the fingerprint, select “ADD FINGERPRINT” and follow the on-screen instructions.
*2 To use each items, select it and follow the on-screen instructions.
[SKIP].
[NEXT]. [ALL SET].
[NEXT].
*2
■ STEP5: au初期設定 (au Initial Setting)
You can use various services provided by au such as au Smart Pass and “au Simple Payment Service” in
which you can purchase applications displayed on Google Play™ by setting an au ID.
au ID Register your au phone number as an au ID.
au ID password Register the password for using your au ID.
Security code The four-digit security code you wrote on the application form.
au-mail Settings and Changing au-mail Address
au-mail is a service which enables you to exchange e-mails with other cell phones which support e-mails
and with PCs. An e-mails address is set automatically in the initial settings. You can change the e-mails
address set in the initial settings.
●You cannot make the initial settings via Wi-Fi
®
communication.
■ Initial Settings
• If you have changed a model, an au-mail address from an old au phone is displayed.
[GET STARTED].
[次へ] (Next).
*1
[Sign in].
Enter the security code
→ [次へ] (Next).
*2
Enter the password
→ [同意して次へ]
(Agree).
*2
Home screen → [ ].
Confirm the contents
→ [Agree].
Check au-mail address
→ [閉じる] (Close).
■ Checking the Usage Method of au-mail Address
[OK].
[ALLOW].
*3
Mark the applications
to install → [Next]
On the home screen
].
→ [
[ ].
[Operation guide]
→ Select the usage
method to check.
■ Changing au-mail Address
On the home screen → [ ] → [ ] → [Change Address/Setting Filter].
[メールアドレスの変更へ] (To change mail address) → Enter the security code → [送信] (Send).
Confirm the contents → [承諾する] (Accept).
Enter an au-mail address → [送信] (Send).
[OK] → [閉じる] (Close).
Confirm the contents
[Finish]*5.
and mark the item to
set up → [Next].
*1 When updating apps in the product, mark “Update”.
*2 The input screen is displayed only when registering au ID for the first time.
*3 The confirmation screen for app permissions is displayed several times. Operate in the same way.
*4 To use the “Data Storage App” application and automatically store photos to the au server, mark “Backup Setting”.
*5 If there are any data stored by “Data Storage App” application, you can restore them from it. Tap “Restore from
backup now” and follow the on-screen instructions.
• Alternatively, on the home screen → “App list screen” → [Settings] → [au Settings] → [au Settings Menu] → [au Initial
Setting].
*4
How to Transfer Data with the au Settings Menu
You can return/store data from an old au phone to this product using a microSD™ memory card or au
server. To protect important data, be sure to save (back up) data periodically to a microSD™ memory
card or au server.
●To return data using an au server, store data from the old au phone to the au server beforehand. To use
the au server, you must set an au ID. (If the old au phone does not have au Settings Menu, use au
Cloud application).
●To return data using a microSD™ memory card, save the data from the old au phone to the microSD™
memory card beforehand. (If the old au phone does not have au Settings Menu, use the au backup
application.)
■ Checking au-mail Address
On the home screen → [ ] → [ ] → [E-mail information].
You can check your au-mail address.
When the confirmation screen is displayed, follow the on-screen instructions.
Operations and displayed contents are subject to change without notice.
Brighten the screen/Increase the light duration of the backlight
When the screen is dark/the backlight is quickly turned off, change the setting.
Brighten the screen
On the home screen
[Display].
→ “App list screen”
→ [Settings].
* You can set whether to automatically adjust the screen brightness according to the ambient brightness by switching
“Adaptive brightness” to be enabled/disabled.
[Brightness level]* → Slide
the bar to the left or right
and set the brightness.
Increase the light
duration of the backlight
[Sleep] → Select time.
On the home screen
→ “App list screen”
→ [Settings].
[au Settings]
→ [au Settings Menu].
[Data Transfer].*
Select “機種変更はこちら”
(If you have changed a
model) and transfer data
by following on-screen
guidances.
* If a confirmation screen is displayed for terms of use/privacy policy, follow the on-screen guidances.
Automatically Storing Photos
Use the following steps to set automatic backup of photos to the au server using the “Data Storage
App” application. You can automatically store them only with a Wi-Fi® connection.
●On the home screen → “App list screen” → [Settings] → [au Settings] → [au Settings Menu] →
[Backup Setting] → Select the type of data to store automatically.
Wireless LAN (Wi-Fi®) settings
You can connect to an Internet service via a household wireless LAN (Wi-Fi®) environment or a public
wireless LAN environment when out and about.
To connect to an Internet via Wi-Fi
For detailed Wi-Fi
®
settings, refer to the “Online Manual”.
On the home screen
→ “App list screen”
→ [Settings].
*1 When [Wi-Fi] is disabled, switch to enable it.
*2 When connecting to a WPS compatible access points, [Wi-Fi preferences] → [Advanced] → [WPS Push Button]/[WPS Pin Entry].
®
, you need to register an access point to connect in advance.
[Network & Internet]. [Wi-Fi].*
1
Select an access point *2
→ Enter the password
→ [CONNECT].
Loading...