Sharp 27SF56B Owner’s Manual

Download

Page 1

Products that have earned the ENERGY STAR ® are designed to protect the

environment through superior energy efficiency,

,;:r.'f

PAGE

" IMPORTANT INFORMATION/IMPORTANT

SAFEGUARDS ..................................................... 2-4

° Trademarks ................................................. 5

• Supplied Accessories ......................... 5

" Before Operating YourTelevision ................... 5

,' Antenna Connections .......................... 6-7

• Quick Reference Control Operation ............... 9

• EZ SETUP during First Use ................... 9-10

• Antenna Setup-DIGITAL .......................... 10-11

° Accessing the MAIN MENU screen without

Remote Control ........................................... 1!

• Channel Call ............................ 11

, Changing Viewing Channel .............. 12

, Language ................................ 13

- Sleep Timer .................................................... t3

- Video Adjust ................................................ 14

° Audio Select ............................. I5-t6

MTS (Muttichannel TV Sound) ..................... 15

SPEAKER (Internal Speaker Switch) ............. 15

FAO (Fixed Audio Output) ......................... 15

AUDIO ADJUST .......................... 16

Digital Audio ..................................................... 17

This operation manual includes basic operating I

instructions in Spanish and French

SPANISH is on page 53-57

FRENCH is on page 58-62

• Closed Caption ..................... 18-19

', Parent Control ................................. 20-30

V-CHIP Operation ..................... 20-27

VIEW TIMER .......................... 28-30

• Energy Save ........................... 31

° Set Up ............................... 32-39

EZ Setup ........................... 32-33

Channel Setting ..................... 33-35

Blue Screen .............................. 36

Personal Preference ....... 37-38

Universal Plus Function ................... 38-39

- Auto Input .................................. 39

, CH/tnput ID .................................. 40-4I

- Screen Format ..................................... 42-43

,, Using the Video and Audio Input Terminals 44-45

• Using the Audio OutputTerminafs ................. 46

• Operation of Universal Remote Control ........ 47-50

° Before Calling for Service ............ 5t

• Calling for Service ........................ 51

o Warning message for Digital broadcasting ........ 52

o Specifications ........... 52

, Limited Warranty ....................... 63

DIGITAL

PAGE

Page 2

Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Co!orTelevision

- built for outstanding quality, reliability and performance. Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed

through the most stringent quality control tests at the factory We have prepared this OPERATION MANUAL so that you may adjust the picture and color to your personal viewing preference

We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color Television set for years to come.

Please read these instructions carefully, and keep them handy for your future reference IMPORTANT

To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided.The numbers are located at the rear of the TV

Model No.:

Serial No.:

O.TA,.To.MO. i

There are two important reasons for prompt warranty registration of your new SHARP television set Use the REGISTRATION CARD packed in with the set.

FIRST - WARRANTY

This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor warranty applicable to your purchase

SECOND - CONSUMER PRODUCT SAFETY ACT To assure that you wil! promptly receive any safety notification on inspection, modification or recall that

SHARP may be required to give under the 1972 Consumer Product Safety AcL PLEASE READ CAREFULLY THE IMPORTANT "LIMITED WARRANTY" CLAUSE ON THE LAST PAGE,

t WARNnNG" TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

CAUTION: TO REDUCE THE RISK OF

DO NOT REMOVE COVER (OR BACK),

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

" EXPOSE THIS APPLIANCE TO WET LOCATIONS,

The lightning flash with arrowhead within a triangle is

intended to tell the user that parts inside the product are a

risk of electric shock to

person&.

ELECTRIC SHOCK,

PERSONNEL,,

The exclamation point within a triangle is intended to tell the

user that important operating and servicing instructions are

in the papers with the appliance.

"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practicaL"

WARNING - FOO Regulations state that any unauthorized changes or modifications to this equipment not

expressly approved by the manufacturer could void the user's authority to operate this equipment.

PRODUCT DISPOSAL

This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder Disposal of these materials may be regulated due to environment considerations For disposal or

recycling information, please contact your local authorities or the Electronics Industries Alliance: www eiaeorg

Page 3

CAUTION:

• DonotplacetheACpowercordundertheTVsetorotherheavyitems.

• Topreventfire,neverplaceanytypeofcandleornakedflamesonthetoporneartheTVset, . Topreventfireorshockhazard,donotexposethisproductstodrippingorsplashingNoobjectsfilled

withliquids,suchas vases, should be placed on the product,

CAUTBON: P_ea.e read o, of those instructions before you operate your television and save

these instructions for later use°

Electrical energy can perform many useful functions.This unithas been engineered and manufactured to assure your personal safety BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS In order not to defeat the safeguards incorporated in this equipment, observe the following basic

rules for its installation, use and servicing 1 Unplug this television equipment from the wall outlet before cleaning

2 Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3 Do not use attachments not recommended by the television equipment manufacturer as they may cause

hazards

4.. Do not use this television equipment near water -- for example, near a bath tub, washbowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool, etc

5 Do not place this equipment on an unstable cart, stand, or table The television equipment may fall,causing

serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand recommended by the manufacturer or sold with the television equipment.

6 Television equipment and cart combination should be moved with care Quick stops,

excessive force, and uneven surfaces may cause the equipment and cart combination to overturn

7. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturer

8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable operation ofthe television equipment and to protect it from overheating, these openings must

not be blocked or covered This television equipment should not be placed in a buiit-in insulation such as a bookcase unless proper ventilation is provided

9 The openings should never be covered with a cloth or other material, and the bottom openings should not

be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface This television equipment should never be placed near or over a radiator or heat register.

t0 This television equipment should be operated only from the type of power source indicated on the marking

label If you are not sure of the type of power supplied to your home, consult your television dealer or local power company.

For television equipment designed to operate from battery power, refer to the operating instructions

! 1 As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger

than the other) The 2-wire polarized plug will fit only one way into the power outlet If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat

this safety feature

12 Do not allow anything to rest on the power cord Do not locate this television equipment where the cord will

be abused by persons walking on it.

Page 4

!i ' "O'P RTANT SAFEGUAR:......:...........DS (c ,,,.ue4i

13 Follow all warnings and instructions marked on the television equipment

14 if an outside antenna is connected to the television equipment, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges Section 810 of the

National Electrical Code provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

..........JI [' LEAD IN

ANTENNA

/ W,RE

/ GROUND,._// _ _"_.,.

.// CLAMP //,'_ tl! \\

,,_" "_::_ _ ANTENNA

I ........... _ I _/"f DISCHARGE UNIT

L _uulr'lv'c''_l "'-.-,-..._[_ _/_ GROUNDING CONDUCTORS

-_'_'-_._ I_ _ (NEC SECTION 810-21)

_-'--,,_ _ GROUND CLAMPS

NEC--NAT1ONAL ELECTRICAL CODE (NEC ART 250. PART H)

t5 For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the walt outlet and disconnect the antenna This will prevent damage to the equipment due to lightning and power-line surges

16 An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits, When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal

17 Do not overload wall outlets and extension cords as this can result in fire or electric shock 18 Never push objects of any kind into this television equipment through cabinet slots as riley may touch

dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the television equipment,

19 Do not attempt to service this television equipment yourself as opening or removing covers may expose you

to dangerous voltage or other hazards Refer all servicing to qualified service personnel,

20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A, When the power cord or plug is damaged or frayed

B If liquid has been spilled into the television equipment,

C, If the television equipment has been exposed to rain or water

D If the television equipment does not operate normally by following the operating instructions, Adjust

only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to

restore the television equipment to normal operation

E, If the television equipment has been dropped or the cabinet has been damaged, E When the television equipment exhibits a distinct change in performance -- this indicates a need for

service,

21_ Upon completion of any service or repairs to this television equipment, ask the service technician to

perform routine safety checks to determine that the television is in safe operating condition

22 When replacement parts are required, be sure the service technician has used replacement parts

specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards

---- POWER SERVICE GROUNDING ELECTRODE SYSTEM

Page 5

iTrade ks...............

I,i_ _ _.i_

DIGITAL

Dotby and the double-D symbol are registered trademarks of Dolby Laboratories

infrared Remote Control Size AA

Dry Batteries

i Before operatingYourTeuevision : : :: I

Location

o For normal operation, your TV should be located in an area of the room where cool adequate ventilation

is provided., Do not place the back of the television set in a place where free airflow witl be restricted,

o Any magnetic force may disturb the color picture Make sure that magnets, electric clocks, toys using

magnets or any other magnetic substance, such as iron are kept well away from the TV set,

Power

YourTV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug If you are unable to insert the plug fully into the outlet, try reversing the plug Should it fait to fit, contact an

electrician, Do not defeat the safety feature of the polarized plug

o If the set is not going to be used for a tong period, such as during a vacation, unplug the set from the

wall outlet to economize power., (If the TV set is plugged in, a slight current still flows, even with the

POWER BUTTON in the OFF position,)

o Lines and other noise may appear inTV broadcast images when an FM tuner or radio is located near

the TV and both radio and TV broadcasts are being received, Should such noise appear, turn off the

radio_

o If you are listening to an AM broadcast, turn the TV off AM broadcast signals may not be received

due to interference from the TV,

e Before using the television, prepare the Remote Control

To use the remote control, insert batteries first

Inserting the batteries

Pull up

Battery Cover

° With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover Insert two

batteries (size "AA") Be sure to match the battery (_/G terminals with the (_)/(_ marks inside the compartment

Page 6

Antennas

• The antenna requirements for good color television reception are more important than those for black & white television reception, For this reason, a good quality outdoor antenna is strongly recommended

The following is a brief explanation of the type of connections that are provided with the various antenna systems:

1 A 75-ohm system is generally a round cable with

F-type connector that can easily be attached to

F4ype connector

a terminal without tools (not supplied)

75-ohm coaxial cable (round)

2. A 300-ohm system is a fiat"twin-lead" cable that can be attached to a 75-ohm terminal through a

300/75-ohm ADAPTOR (not supplied)

i.... .....

gOO-ohm twin-lead cable (flat)

,, Refer to one of the following two diagrams when connecting to an outdoor antenna

A: Using a VHF/UHF combination outdoor antenna.

B: Using separate VHF and/or UHF outdoor antenna.

o Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set

A. Combination VHF/UHF Antennas

VHF/UHF 300175-ohm

ANTENNA (Not supplied) .... "/_

ADAPTOR

VHF/UHF ANTENNA

B. Separate VHF/UHF Antenna

REAR OF TV

VHF UHF

ANTENNA ANTENNA

"_30o,ehm

5-ohm I

coaxial I ._NTJ:_ I

COMBINER

300-ohm \(aot _u_pfied) [ ......... :

o 75-ohm coaxial / _#:

REAR OF TV

Page 7

F-type connector should be finger-tightened only.

F-type connector

75-ohm coaxial cable

o A 75 ohm coaxial cable connector is built intothe set for easy hookup When connecting the 75 ohm

coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR

• Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channeis are scrambled, a cable TV converter/descrambler isgenerally provided to the subscriber by

the cable TV company. This converter/descrambler is necessary for normai viewing of the scrambled channels. (Set your TV on channel 3 or 4 Typically one of these channels is used. If this is unknown,

consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company One possible method of utilizing the converter/descrambler provided by your

cable TV company is explained below. Please note: RF switch equipped with position AiB (not provided) is required

"A" position on the RF switch (not supplied) : You can view atl unscrambled channels using theTV's "B" position on the RF switch (not supplied) : You can view the scrambled channels via the converter/

RF switch (not supplied)

____ A_LI_ ' signal _._ _OU_L= j iN_=_ __._Jsplitter _ CableTV Line

When connecting the RF cable to theTV set, do not tighten F4ype connector with tools.

If tools are used, it may cause damage to your TV seL

(The breaking of internal circuit, etco)

channel keys

descrambler using the converter's channel keys

Two-set 1

CableTV converter!

descrambler

(notsupplied)

o Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that

might be required.

Page 8

POWER Press -->On

Press again -4 Off

VIDEO/AUDIO TERMINALS

(INSIDE DOOR)

REMOTE CONTROL SENSOR

Press --> Accesses MAiN MENU, Press again _ Exits MAiN MENU

POWER Press --_ On

Press again -4 Off REMOTE KEYPAD (0 - 9)

Sets the channel FLASHBACK

Returns to previous channel

o (DOT) Sets the channel

PERSONAL PREFERENCE With the Persona_ Preference buttons,\

you can program your favorite \ programs by using the 4 categories A, \

B, C and D The channets can be accessed quickly by using these

buttons (See page 38, 39)

VOLUME UP/DOWN r

(+) increases sound,, (-) Decreases sound,

,, Changes or se)ects the TV

adjustments on On-Screen Disptay

Press -4 Accesses MAIN J Press again -4 Exits MAiN MENU

CATV/DVD-TViVCR MODE SELECT SWITCH

In TViVCR position, signals sent will be for TV and VCR control

In CATV/DVD position, signals sent

wil_ be for cable TV converter and

DVD control. DVD/VCR CONTROL

See page 48

VOLUME UP/DOWN (+) Increases sound,

(- ) Decreases sound

infrared Transmitter Window

DISPLAY

Press -4 Displays receiving channel for 4 seconds,

Press again -_ Removes display

- Temporarily displays receiving channel when in Closed Caption mode,

INPUT Press --_ Switches to external video INPUT 1 mode Press twice -4 Switches to external

video iNPUT 2 mode Press 3 times --> Switches to external video INPUT 3 mode or

COMPONENT mode Press 4 times -4 Switches back to

the original TV mode See page 46 ENTER

• Used to confirm the channel

selection and Persona! Preference channet

,, Used in some instances where a

Cable Converter Box requires an "enter" command after selecting

channels, when using the REMOTE KEYPAD button See page 48

CHANNEL UP/DOWN (A) Selects next higher channel

(V') Selects next lower channel

- See pages 34-36 for Channel Setting,

° Moves the" _" mark on the MENU

screens

MUTE

Press --> Mutes sound. Press again -4 Restores sound

CHANNEL UP/DOWN (_&) Selects next higher channel

(v) Setects next lower channel

- The above shaded buttons on the Remote Control gtow in the dark. To use the gIow-in-the-dark display on the remote control, place ft under a fluorescent light or other lighting

o The phosphorescent material contains no radioactive or toxic material, so it is safe to use

• The degree of illumination will vary depending on the strength of ]ighting used,

o The degree of illumination will decrease with time and depending on the temperature, . The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.

o Sunlight and fluorescent lighting are the most effective when charging the display. o The TV set and remote controt illustrationsand the on-screen displays in this manual may differ from

their actual appearance.

Page 9

When you turn on the TV for the first time, it will automatically memorize the broadcasting channels after EZ SETUP process.

Please perform the following instructions before pressing the POWER button.

('t) Insert the batteries into the remote control. (See page 5) (2) Connect the antenna cable to theTV set. (See pages 6, 7)

(3) Plug in the AC POWER cord to the wall outlet.

(._)O O O

(9@G ®®®

POWER

VOLUME

(+)/(-)

CHANNEL

uP(A)/

DOWN(V)

Press the POWER button on the TV set or on the Remote Control to turn on the TV. The SELECT LANGUAGE screen will be displayed,

(On the Set) (On the Remote Control)

POWER POWER

T,,I

o Q

Press CH A/_' to select "ENGLISH", "ESPANOL (SPANISH)" or "FRANCAIS (FRENCH)"

3 Press VOL +/- to access the EZ SETUP screen

SELECT LANGUAGE

OENGLISH

ESPA_OL

F_AI_CMS

SELECT:0H Alv SET :VOL+I-

SELECTLANGUAGEscreen

SELECT LAt{GUAGE

eENGLtSH

ESPAI)0L FRANCAtS

SELECT:OH_m SET :VOL+I-

CO_tttECT ANTE_flA OR CABLE

START EZ SETUP?

eSTOP START

(EZ SETUP screen)

Press VOL +. The tuner will automatically search for the

broadcasting or cable TV channels for ANALOG.. (The CH No. will automatically increase when it

appears.) Once tuning for analog broadcasting channel is

finished, tuning for digital channel will start. If cable TV channels is detected, it will not proceed to digital

channel tuning.

If you want to stop the EZ SETUP process once it has started, press VOL - and it will be canceled

If you want to SET UP again, please refer to page 33, 34 on SET UE

To cancel EZ SETUP

Press VOL -.

(STOP)

(START)

(Analog channel tunning)

PLEASE WAIT

AUTO PROGRA',_,_H{G

STOP OSTART

(Digital channe! running)

PLEASEWAIT AUTO PRCGB_},{_ING

DIGITAL 6£

STOP gSTABT

Page 10

i during First Use (Continued i " ii :'::................

Once EZ SETUP is comp,ete, the lowest channe, number [ 2] memorized will be displayed, (eg, Analog Channel 2)

• If EZ SETUP does not memorize all the channels in your region, please refer to pages 34-36 for more information on manually memorizing the channels using CHANNEL SETTING

o it may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is

incorrect or frequency jamming is occurring around the area Please refer to pages 34-36 for more information on manually memorizing the channels using CHANNEL SETTING

• "Please Wait" display on the screen during system initialization

e In order to receive digital air broadcasts, you need a digital broadcast antenna.You can set

the antenna configuration through the Antenna Setup-Digital screen. Digital Channel tuning should be completed before proceeding with this setting.

I I

1 Press MENU to access the MAIN MENU screen,

2 Press CH APe" to move the "@" mark to "SET UP",

Press VOL +/- to access the SET UP screen, then press OH A/V to move the "O" mark to "CH SETTING".

4 Press VOL +/- to access the CH SETTING screen, then press

CH A/V to move the "O" mark to select "ANTENNA SETUP-

DIGITAL:',

o Antenna Setup-Digital can only be select

during Digital Channel

}._ENU

C££LE EP TP,ER [_;:_Vt0E0 ADJUST _AUDI0 SELECT _D_GITAL AUDIO

_LOSED CAPTION

_PARENT CONTROL

_SNERGY SAVE

@_SET UP

(MAIN MENU screen)

_SET UP

BLUE SCREEN PERSONAL PREE UNIVERSAL PLUS

LANGUAGE

@CH SETTING

AUTO IHPUT CHIINPUT IO

SCREEI_ FORMAT

(SET UP screen)

CH SETTING

EZ SETUP AIRIANALOG CABLE ANALOG CN SEARCH DIGITAL CH SEARCH OH ME_I_RY

@ANTENNA SETUP_DIGITAI

(CH SETTING screen)

Press VOL +I- to access ANTENNA SETUP-DIGITAL screen.

[] SIGNAL STRENGTH

(i)Press CH A/_" to select "SIGNAL STRENGTH" (ii) Adjust the direction of the antenna to obtain the signal

strength level 60 or higher°

SIGNAL STRENGTH CHANNEL STRENGTM

(ANTENNASETUP-DIGITALscreen)

Page 11

I Antenna Setup=DIGITAL (Continued)"

[] CHANNEL STRENGTH

Make sure the signal strength of each channel received is finely adjusted, (i) Press CH A/_" to select"CHANNEL STRENGTH",

(ii) Press VOL +/- to select other channels (iii) Input channel number (2-69) using REMO'[E KEYPAD

(0-9) button

(iv) Adjust the direction of the antenna to obtain the signal

strength level 60 or higher,

I®® ®i

o This function is available for DIGITAL channel only

6 Press MENU to exit O

SIGNALSTRENGTH CHANNELSTRENGTH

! if!

= If you misplaced your Remote Control you can still access most settings

Via the MAIN MENU screen by pressing MENU on the TV set

• Some features of your TV set are not accessible without the Remote Control If you lost your Remote Control, contact a Sharp Service Center

for a replacement

(On the Set)

button

" Cain " ....................'...................." :::.................'-

e To display receiving channel information.

Press DISPLAY once_ The display appears as shown on right

o If the viewing channel is a digital channel, the information of channel number, audio service type,

broadcast station, program information and V-Chip rating will appear°

:i' : i i [: :: t::::0iG_T,_L

OISPL_Y

At_DiO:STEREO :

(whileviewingdigitalchannel)

4:3 ID01

eSTEREO _Otl AIR

_AP **OilAI_

t_0_0

whileviewing analogchannel)

TVPG OtSV

2 Press DISPLAY twice The timer information screen will appear

o When no timer is set, the timer information screen will not DisPLAY

appear O

3 Press DISPLAY again to return to normal screen

DISPLAY

SLEEP T It_,_EB

1201,1REMAII_

V H£_',_]t,IG rlt_E

1'i

Page 12

Please note: your new Television is capable of receiving the full

range of AIR-3"V channels available today, from the most advanced digital channels, to the more traditional analog channels. As the

transition toward full digital TV continues, some AIR-TV systems in the USA will have a mixture of analog and digital channels in

their lineups.

[] You can change channels in several ways.

- REMOTE KEYPAD

FLASHBACK

CHANNEL

- UP(A)/ DOWN(_)

Method 1 Using CH A/V on the remote

control unit or on the TV set

Method 2 (i) Press FLASHBACK to switch to the previously tuned channel.

(ii) Press FLASHBACK again to switch back to the currently tuned channel.

• FLASHBACK will not work if no channel has been changed after TV is turned on.

Method 3 Using REMOTE KEYPAD buttons (0-g and ENTER) to select up to 125 channels for VHF/UHF/

(On the Set)

CH AI_"

buttons

(while viewing

digital channel)

4:3 IDOl

QSI"ERE0 _Ol_ AI

SAP _-ON A_R

_hile viewinganalogchannel)

Fb_SHBACE

At{ALO_

TVPG DL_V

CATV,

TO select a 1 or 2-digit analog channel number (e, g,, Channel 5):

IQ® :ol

tQ® ®1

Press 5 -+ ENTER

, When selecting a 1-digit channel number, it is not necessary to press 0 before the number

o When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds..

To select a 3-digit analog cable channel number (e. g., Channel 115):

Press 1 -_ 1 --> 5

= When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds.. o If you push "0" by itself, nothing wilt happen

To select a digital channel number (e. g. Channel 10.1):

Press 1 -> 0 --> • (DOT) --> 1 -_ ENTER

• Complete the above steps within a few seconds o When you enter 0-9 and • (DOT), channel selection will be made if there is no operation for a few

seconds

Page 13

e The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.

1 Press MENU to access the MAIN MENU screen

_SLEEP ;E!4S_

r&_t_$£€OAO_UST _UO_O SELECT

_OIGfTkL A_8tO

_CLOSCO CAPTION _PkflCt{TCONTROL _SfESGY SAVE _SET UP

MAIN MENU screen

_ENU C_CLEEP ?_CR

_IDEO A_JU_T _-,_UO_OSELECT

_CIOSED CAPTIOtl

_PA_Et{T CG'_T_OL _Er_E_GY SAVE

_ET UP

_SET UP CLUE CC_EN

P_5Ott_ PREE tt_VC_SAL PLUS

O_At_UAGE

C_ _CT?II_ AUTO IIIPUT CHt_PUT _

$C_E£N FO_AT

(SET UP screen)

Press CH A/V to move the "@" mark to "SET UP",

Press VOL +/- to access the SET UP screen, then press CH A/V'

to move the "@" mark to "LANGUAGE".

4 Press VOL +/- to access the LANGUAGE select screen,

L_tIGUkG_

O_t&GLI_H

FRkt_CA_S

LANGUAGEselectscreen

Press OH AIV to select "ENGLISH", "ESPA_IOL (SPANISH)" or

"FRANCAIS (FRENCR)'L

IE_f6LI SH

eECPA60L

tFR#_CAIS

6 Press MENU to exit.. @

e You can preset your television to turn off automatically in increments of 30, 60, 90 or 120 minutes,

1 Press MENU to access the MAIN MENU screen.

2 Press VOL +/- to access the SLEEP TIMER screen.

_st;u

_LEEP T_ER

&t_Vl_O AOJ_$T _AUDIO SELECT _O{GtTkL A_OIO _t_CLO_EOCAPTION _P_ENT CONTROL

;_t_CR_ CkVE

3 Press VOL +/- to set a sleep time of 30, 60, 90 or t20 minutes.

S_EEP TIMER

4 PressMENUtoexiL _ _--_ oMENU

o To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and

select "- - - M REMAIN" during step 3. SLEEP TIMER screen'

- While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular intervals or when the Remote's DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER

turns off the TV, the screen prompts the time remaining for 4 seconds The SLEEP TIMER shows a similar display for each remaining minute and a 10-second display right before shutting off the TV.

o If you turn the POWER OFF, the SLEEP TIMER will automatica!ly reset

Page 14

Video Adjust .............. ""7

........................................." :::7:.j

o Description of Adjustment Items

j Selecteditem

PICTURE TINT COLOR

IBR'IGHT

SHARP COLOR TEMP

RESET

VOL + button Toincreasecontrasl

To,makeskintonesgreenish Toincreasecolorintensily Toincreasebrightness

Toincreasesharpness Tochoosea LOW,ML,MHorHIGHcolortone.

Toreturnalladjustmentstofactorypresetlevels

VOL - button Todecreasecontrast Tomakeskintonesreddish

Todecrease€olor'intensity

Todecreasebrightness Todecreasesharpness

Press MENU to access the MAIN MENU screen, Press CH ,&/V to move the "_" mark to "VIDEO ADJUST".

Press VOL +/- to access the PICTURE adjust screen..

o The word "DIGITAL" will appear to show viewing channel is a

digital channel.

Q®®

®®®

__ "CHANNEL

i o uP(A)/

r,tEltL_

E93SLEEPT_MER

e_V_DEO ADJUST

E_-+AUDIOSELECT _DIGITAI AUDIO

+_3CL0SEDCAPTION

E_PARENT CO_TROL _ENERGY SAVE _SET UP

_D v_+t

(MAIN MENU screen)

DOWN(V)

DIGITAL

I Ill!tltllllllllltll]!Iltllll!llllflltlllllllllllll

PICTURE adjust screen

Press CH A/V to select the desired adjustment item (Refer to the diagram below,,)

i f ; t

_:CHA _.: CH '!t

Press VOL +/- to adjust the setting

ItlItttlIIIlI!!tlf!IIII!IllUlItllII!IIIIIIIIIIlflIt

-- VOL -

Repeat steps 4 to 5 to adjust other settings,

P CTURE 58

DIGIT_

P1CTURE 50

VOL + increases contrast ---

decreases contrast

7 Press MENU to exiL O

R-5_>

. VIDEO ADJUST setting, once set, is shared among AIR/CABLE. INPUT 1, INPUT 2, and iNPUT 3

modes

.. VIDEO ADJUST setting for INPUT 3 when used as COMPONENT can be set independently . VIDEO ADJUST setting for Digital Channel can be set independently,

Page 15

[] IVlTS (Multichannel TV Sound) (For Analog Channel only)

This function allows reception of stereo or bilingual TV sound.

e You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

Stereo broadcasts LJve television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo

sound. SAP broadcasts

Television broadcast can be received with either MAIN or SAP sound° MAIN sound: The normal program soundtrack (Monaural or stereo where available )

SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)

e if stereo sound is difficult to hear;

You can obtain clearer sound by manually switching to fixed monaural mode

[] SPEAKER (Internal Speaker Switch)

This function turns the TV's internal speakers "ON" or "OFF" when listening to sound from external speakers by using the AUDIO OUTPUT Terminals. (See page 47).

[] FAO (Fixed Audio Output)

This function turns the TV's internal speakers "OFF" and allows fixed audio output from the AUDIO OUTPUT Terminals. (See page 47). With FAO, the TV's volume control is disabled°

1 Press MENU to access the MAIN MENU screen,

2 Press OH A!_' to move the "0" mark to "AUDIO SELECT",

EI_SLEEP TtNE£ [_VIDEO ADJUST

Q_---=AUOtOSELECT

_DIGITAL AUDIO

_CLOSED CAPTION

["_PARENT COf_TROL

_ENERGY SAVE

_SET UP

3 Press VOL +/- to access the AUDIO SELECT screen.

4 Press OH A/V to move the "0" mark to"MTS', "SPEAKER", "FAO"

or "AUDIO ADJUST".

• If the viewing channel is a digital --> ÷ channel, MTS cannot be selected.

Press VOL +/- to select "STEREO", "SAP" or"MONO" when the

"0" mark is at "MTS" position,

MTS

(For Analog

Channelonly)

SPEAKER FAO

tt t _,

(MAIN MENU screen)

_AUOtO S_LEOT

e_,{TS :STEREO

SPEAKER :G'_

EAO ;OFF AUDIOADJUST

&UDfO SELECT screen

E_3AUO]O SELECT

eMTS :STEREO

_PEAKER :O#l

AO :OFF

AUDIO ADJUST

'AUDIO SELECT screen

'15

Page 16

R:i_i!/ _/"'"_ _-- _ _ :"_"_'_i'::"'i......._' i_' i _' _"_"ii'_<' _'• ._:71' _i i_ ?_"i"'""'i_i!_i'_:r.! •

Audio Select (Cont nued) ,.

_,,,,:,i,,r_,_,,,,,.........._, ........................,,,,,,:,:..........._i_--_i ¸,,,_'__.__

[] AUDIO ADJUST

When the "_" mark is at "AUDIO ADJUST", press VOL +/- to access the AUDIO ADJUST screen. To access the desired item,

press CH A/_' To adjust the audio setting, press VOL +I-. [TREBLE]_._[ BASS ] _[BALANCE].__[ RESET I

tl _J

Selecteditem

TREBLE BASS

BALANCE

RESET To returnat!adjustmentstofactorypresetfevets

6 Press MENU to exiL O

An example screen displaying ON AIR Analog Channel when receiving stereo broadcasts Current channel number_

%- ON AIR" wit! appear next to STEREO or

SAP when receiving STEREO or SAP

broadcasts

o Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo

broadcast, You must switch the mode back to STEREO if you want to hear stereo sound again

° Selecting MTS while receiving video signals from INPUT terminals does not change the type of

sound; in this case, sound is determined by the video source,

o If "FAO" mode is on, "SPEAKER" mode will automatically turn off Changing "SPEAKER" setting will

not affect "FAO" mode,

VOL + button Toincreasetrebleresponse

Toincreasebassresponse

Toemphasizethe right

speaker'svolume.

VOL - button

To decreasetrebleresponse

To decreasebassresponse

Toemphasizethe left

speaker'svolume

TREBLE

OS1£££O*._

SAP cONAIR

M0_0

(AnalogCHANNELcallonscreer

Page 17

This feature allows you to select the Primary and Secondary language and as well the type of audio transmitted in a digital broadcast. If the viewing channel is an analog channel, Digital

Audio cannot be selected,

1 Press MENU to access MAIN MENU screen

2 Press CH _,/_" to move the "_" mark to "DIGITAL AUDIO"..

_SLEEP TIMER _V JDEO ADJUST

_-AUDt 0 SELECT

{'_,_-D_GITAL AUDIO

_CLOSED 6APTIOI_

_Z_IPAREt'ITCONTROL _ENEEGY SAVE _SET UP

(MAIN MENU screen)

Press VOL +/- to access the DIGITAL AUDIO screen_

Press CH A/V to select "Audio Service" or "Audio

AUDIO SERVICE

Preference", then press VOL +/- to access to the selected

mode,

(DIGITAL AUDIO screen)

If a program has three services, audio service toggles

like below:

o AUDIO SERVICE:The type of audio transmitted in a digital broadcast signal,

tn additional, it is possible for multiple audio track to accompany a signal video track

[] AUDIO PREFERENCE

(i) Press CH _'_' to select "PRIMARY LANGUAGE" or

"SECONDARY LANGUAGE".

(ii) Press VOL +/- to change the setting

PRIMARY LANGUAGE :ENGLISH

PRIMARY LANGUAGE

SECONDARY LANGUAGE

• The language which is selected in Primary Language will not appear in Secondary Language selection

mode°

5 Press MENU to exit, ©

Page 18

' >,

[,ILL::==:, ,,,_,_,_,_,_,_,,_,_,,,_,,,_,,_:_,,_,_,_,,/:,,i,_i,_,_i,_i/ii iii i _,_i

e How to set CLOSED CAPTION

o YourTV is equipped with an internal Closed Caption decoder "Closed

Caption" is a system which allows conversations, narration, and sound effects in TV programs and home videos to appear as captions on the

TV screen (see the illustration).

o Not all the programs and videos wilt offer closed captioning. Please

look for the "_" symbol to ensure that captions will be shown

o Closed Caption broadcast for Analog Channel can be viewed in two

modes: CAPTION and TEX'E For each mode, two channels are available, CH1 and CH2

IH,(_"_'_,_ il r VOLUME

Closed Caption broadcast for Digital Channel can be viewed in 10 modes (maximum)_ The CAPTION mode shows subscripts of dialogs and commentaries of TV dramas and news programs while allowing clear view of the

picture.

III__ uP(A)/

H? ,o410OWN{,>

U L o_41 MENU

The TEXT mode displays over the picture other various information (such as TV program schedule, weather forecast, etc.) that is

independent of the TV programs,

[] During viewing analog channel

1 Press MENU to access the MAIN MENU screen.

2 Press CH A!_ to move the "@" mark to "CLOSED CAPTION",

E_SLEEP T_MER [I;;_VIDEOADJUST E3AUDIO SELECT ZT_OIGITAL AUDIO

O_LOSED CAPTION

I_PARENT CONTROL _ERERGY SAVE

ES]SET UP

CHANNEL

3 Press VOL +/- to access the CLOSED CAPTION setting screen,

Press CH .&/_' to move the "_" mark to either"MODE" or"DATA".

5 Press VOL +/- to change the CLOSED CAPTION setting.

MODE:

__ DATA:

E3_Z3

(MAIN MENU screen)

_OLOS_D CAPTION

e_bE :DAPTIO_

DATA ;CH I

CLOSEDCAPTIONsettingscreen)

_CLOSED CAPTION _,40DE :CAPTION

eDATA :OH I

_CLOSED DAPTIO_

• k_OD_ :DAPTION DATA :CH I

Press MENU to exit,,

Page 19

[] During viewing digital channel

1 Repeat steps I to 2 of During viewing analog channel.

2 PressVOL +/- to accessthe CLOSED CAPTION screen, 3 Press CH _/? to select"CLOSED CAPTION SERVICE"

or "CLOSED CAPTION PREFERENCE" and then press VOL +/- to enter to the selected mode screen.

CLOSED CAPTION SERVICE

[]

(i) Press CH A/V to select"CLOSED CAPTION

SERVICE". Closed caption services toggles like below:

(CLOSED CAPTION screen)

SELECT SERVICE : OFF

(CLOSED CAPTION SERVICE screen'

FONT SIZE : DEFAULT

CLOSED CAPTION PREFERENCE

[]

(i) Press CH A/V to select "FONT SIZE", "FONT

COLOR", "BACKGROUND COLOR" or "RESET"

(ii) Press VOL +/- to select desired setting

The setting toggles as shown below:

FONT SIZE : DEFAULT

FONT SIZE

FONT COLOR/BACKGROUND COLOR

FONT COLOR : DEFAULT

RESET

• For resetting all adjustment items to the factory preset values.

o Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor

or if there are problems at the broadcast source. This does not necessarily indicate a problem with your TV

• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the closed captions will disappear momentarily

o If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become

dark and blank for some programs. Should this occur, switch the Closed Caption mode to "OFF"

Page 20

[] V-CHIP

• This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your children from watching violence or sexual scenes that may

be harmful.

° Restriction of TV programs includes four characters that contain information about the program's MPAA

rating, the TV Parental Guidelines, Canadian rating system and New DTV Ratings.

• Since aTV program may use either the MPAA rating, theTV Guidelines, the Canadian rating system (if with Canada program) or New DTV Ratings, you should adjust all for complete control

[1] MPAA RATING

RATING

G GENERAL AUDIENCES. All ages admitted.

PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for

children.

age

PG-13 PARENTS STRONGLY CAUTIONED Some material may be inappropriate for

children under 13.

based

R RESTRICTED. Under 17 requires accompanying parent or adult guardian.

NC-t7 NOONE 17AND UNDER ADMITTED. X X Rating is an older rating that is unified with NC-17 but may be encoded on

older movie's data

, MPAA RATING

Example '1:

"PG-13" in the age-based rating is blocked, this wilt automatically block the higher ratings "R",

"NC-17", "X" also.

1, User setting 2. Block table

..... _ b_ock

PG-13 BLOCK age _bfock

BLOCK block

BLOCK black

BLOCK bfock

I _ Inotto

I _ Select

based auto-

not to

black

auto-

Example 2:

"R" in the age-based rating is blocked, this will automatically block the higher rating "NC-17", "X"

also.

1. User setting

PG-13 --

R BLOCK

N0-17 BLOCK

X BLOCK

2+ Block table

=black

PG nat to

block

e black

ba ;d Select

notto

block

auto-

black

auto- block

• MPAA RATING is only age-based

[2] TV PARENTAL GUIDELINES

<z= content based

RATING

AGE D L

(Sexually (Adult

Suggestive Language)

Dialog)

TV-Y (All children) TV-Y7 (Direct to Older Children)

[] -- --

U TV-G _General Audience)_

age TV-PG (Parental Guidance

based i Suggested)

TV-14

(Parents Strongly

[] [] []

Cautioned) TV-MA (Mature Audience Only)

[] - []

@ : Content Rating can be set

- : Content Rating cannot be set (not normally broadcast by TV station)

S V

(Sexual (Violence)

Situation)

@ @

[] [] [] []

(Fantasy

Violence)

[]

Page 21

o TV PARENTAL GUIDELINES (Example)

Example 1.1 : Age Based setting Clear [_ s (block) from each "AGE" box for al{ ratings This will automatically unblock everything

Example 1.2 : Age Based setting

For "TV-G" put a [] in the "AGE" box.,This will automatically block the higher age ratings "TV+PG", "TV-14" and "TV-MA" as well as "TV-G".

Please note the content ratings "D", "U',"S", "V" are automatically blocked as well.

AGE D L S V FV

TV-Y7 _: BLOCK

+TV-+G _TV-+4

OTV4,+A

ME_+UzRETURN

t4ENU:RETUffN

Example 2.1 : Content Based setting If you choose to unblock every content-based items ("D", "E', "S", "V"), clear the [] (block) from each "AGE" box of "TV-PG", "TV-14" and "TV-

MA".

Example 2,2 : Content Based setting Put a [_ in the box corresponding to "TV-PG" (row) and "V (Viotence)" (column). This will automatically block the "V" boxes for "TV-14" and "TV-MA". Setting only "TV- PG-V", "TV-14-V" or "TV-MA-V" will not block all programs rated "TV-PG", "TV-14" or "TV-MA".

Example 3 : Resetting an Age Based setting For "TV-14", put a [] (block) in the "AGE" box.. This will again automatically block the content ratings "D", '12, "S", "V"

for "TV-MA" as well as "TV-14" ("D" is not available for "TV-MA"). Please note that the _owerage rating "TV-PG" does not change from its

AGE D L B V FV

Tv-Y+ ; ; ; ; + m:+++cK

TV+6

TV-PG TV-14

@TV-MA

_,+E_U:RETURN

AGE O L 5 V FV

TV-Y7 i - i - [] _:BLOCK

TV-G

OTV-PG

++-'l+i +i++'+

TV-_4 TV-_,_A

P,+E_U: P{ETUR+++

AGE D L S V FV

T,+-Y+ : - -"-"+ _:++OCK

TV-G TV+PG

++'i+_+ii!+'°+

OTV+_4

TV+MA

_,_Et'IU:RETURN

previous settings after this.

o Content ratings can be modified but only inthe combinations indicated by [] in the table on page 21 ° Changing a lower age rating's content setting to "BLOCK" automatically changes the same higher

age rating's content setting to "BLOCK" regardless of their previous settings,

o Changing a lower rating's"AG E"setting to"BLOCK" automatically changes atl higher ratings to"BLOCK"

regardless of their previous settings,

- For"TV-Y7", "T',/-PG", "TV-14" and "TV-MA", if you clear the [] in the "AGE" box (unblock) you can still change settings based on content.

Clearing a higher rating's age or content setting wili not clear lower settings Make sure that all undesired boxes are blocked

Page 22

t ParentContronp.__..Loper t,-on)" .............' ....................t

[] V-CHIP o This function allows you to restrict TV programs and also allows you to control TV usage based on

FCC data. This function is to prevent your children from watching violence or sexual scenes that may be harmful..

" Restriction of TV programs includes four characters that contain information about the program's MPAA

rating, the TV Parental Guidelines, Canadian rating system and New DTV Ratings.

o Since a TV program may use either the MPAA rating, the TV Guidelines, the Canadian rating system (if

with Canada program) or New DTV Ratings, you should adjust al! for complete control.

[1] MPAA RATING

RATING

G GENERAL AUDIENCES. All ages admitted. PG PARENTAL GUIDANCE SUGGESTED Some material may not be sukable for

children.

age PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for

based

children under 13.

R RESTRICTED. Under 17 requires accompanying parent or adult guardian. NC-17 NO ONE 17 AND UNDER ADMITTED.

X X Rating is an older rating that is unified with NC-17 but may be encoded on

older movie's data.

- MPAA RATING Example t:

"PG-13" in the age-based rating is blocked, this will automatically block the higher ratings "R",

"NC-17", "X" also

1, User setting

G .....

PG-13

R BLOCK

NC-17 BLOCK

X BLOCK

2, Block table

notre

block

not to

block

e block

ba ed auto-

Select

block eulo-

block

Example 2:

"R" in the age-based rating is blocked, this wilt automatically block the higher rating "NC-I7", "X"

also,,

1, User settin

G .....

PC-13 .....

R BLOCK

NC-17 BLOCK

X BLOCK

2. Block table

not to

G block

not to

PG bfoek

a e PG-13 jblock

ba ,_d_ Select

_ block

not to

bteck

eMil:t*

o MPAA RATING is only age-based

[2] TV PARENTAL GUIDELINES

D L S V FV

(Sexually (Adult (Sexual (Violence) (Fantasy

RATING t AGE l

Suggestive Language) Situation) Violence)

Dialog)

_llchildren) I '_' I

,, _rectt 9 Sider Children) / @ I

'Li' ] TVtG (General' Audience) t _-

, age i TV-PG (Parental Guidance / []

@ @ @ @ _

oasea l_ I

/ TV-14 (Parents Strongly I @ ]

@ _ @ [] -

c£T!°ned. I 4

TV-MA (Mature Audience Only) _.L__

: content Rating can be set : Content Rating cannot be set (not normally broadcast by TV station)

- L_ _ [] _

content based

Page 23

e How to set V-CHIP [1] MPAA RATING

Press MENU to access the MAIN MENU screen

Press CH ,_./V to move the "@" mark to "PARENT CONTROUL

®®® H

(_ ® (_)} VOLUME

®®® lit (+)/(-)

c:_'_':_"___ II//CHANNEL

_i up(A)/

c_ o _! MENU

eI_E_SLEEP TI_EB

(_;_VIDEO ADJUST _AUDIO SELECT

_DIGITAL AUDIO _CLOSED CAPTION

BE]PARENT CONTROL _ENBRGY SAVE _BET UP

(MAIN MENU screen)

_SLEEP TIMER SEIVIDEO ADJUST _AUO]O SELECT

ED{GITAL AUDIO _CLOSEO CAPTION

e_PARENT CONTROL

_E_ERGY SAVE _SET UP

DOWN(V)

3 Press VOL +/- to access the PARENT CONTROL screen,

4- Press VOL +/- to access theV-CH1P select screen.

o If SECRET No,,is already set, enter the SECRET No

(See To change theV-CHIP BLOCK after registering

a secret No. on page 28,)

Press VOL +1- to select "MPAA". Press CH ,_./_' to move the

"0" mark to "PG", then press VOL +/- to select BLOCK° If you set"PG" to BLOCK, "PG-13", "R", "NC-17" and "X" are automatically

blocked.

E_PARENT CONTROL

OV-CHIP BLOCK

VIEW TIMER

PARENT CONTROL screen

OMPAA

TV GUIDELINES Cdn English Ra_ings

Cdn F{e_ch _ali_gs Nevl OTV Baling_

STATUS :OFF

(V-CHIP select screen

eRG :BLOCK

FG-13 :BLOCK

R :BLOCK

ND_I7 :BLOCK

X :BLOCK

MENU:RETURN

6 Press MENU to return to the V-CHIP select screen, 0

Page 24

7 Press MENU, then "INPUT SECRET No2 will be displayed.

= If SECRET No. is already set, skip to step 9.

Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

I®®®]

IO ® ®i

9 When done, press MENU to exit, O

o If you set "G" to BLOCK, all ratings are automatically blocked

o If you set "X" to BLOCK, "G", "PG", "PG-13", "R" and "NC-17" are not blocked..

INPUT _ECBETNo

[2] TV GUIDELINES 1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH A/V to move the"_" mark to "TV GUIDEL1NES'L

3 Press VOL +/- to access theTV GUIDELINES screen..

To change AGE and CONTENT SETTING, press CH A/_" to move the "0" mark to the desired rating and then press VOL +/- to

select.

Press CH .&/'e' to move the "_)" mark to the desired content item and then press VOL +t- to select either "BLOCK" or" "

(unb!ock),

MPAA

OTV GUIDELINES

Cdn EnQlish Rating_ 0dn F(_nc_ Balings

Re_ DTV Ralings

STATUS :OFF

(V-CHIP select screen)

AGE {>L S V FV

_'TV-Y7 [ -_ -- --[_ _:BtOGK

TV-G TV-PG

TV-14 TVq,_A

f_ENU :RETURN

TV GUIDELINES screen'

TV-Y7

OAGE BLOCK

L .....

V .....

FV BLOGK

MENU: RETURN

CONTENT RATING screen

Press MENU to return to the TV GUIDELINES screen.

_' Repeat steps 4 to 6 until all ratings and their contents are seL

When done, press MENU to return to V-CHIP select screen_

) Press MENU to exit. ME.U

Note:

• If SECRET No is not set, enter a SECRET No,,as show in steps 7 and 8 of [1] MPAA RATING,

Page 25

DParentcontrol(v-cN P0perati0 i !

o How to set Canadian Rating System

Setting for Canadian English ratings and Canadian French ratings.

Repeat steps 1 to 4 of [1] MPAA RATING.

Press CH A/V' to move the "0" mark to "Cdn. English Ratings",

then press VOL +/-4

You can select "BLOCK" or "- "(unblock) rating items by pressing CH A/_' and VOL +/- If you select "PG" to BLOCK, "14 +" and "18 +" are automatically blocked.

You can select "BLOCK" or" "(unblock) rating items by pressing CH A/_F and VOL +/- if you select"Cdn. French Ratings"

in step 2. If you select"8 +" to BLOCK, "13 +", "16 +" and "18 +" are

automatically blocked.

MPAA

TV GUIDELINES

OCdt) En_lis_ Ralings

Cdn Fret}oh RaIi_gs

Ne_ DTV Ralings

STATUS :Ot_

OC :.....

G :.....

PG :BLOCK I4+ ;BLOCK

_B÷ :BLOCK

ME#_U;RETURt,_

Canadian English ratings)

eG ;.....

8- :BLOCK

_3. :BLOCK

16÷ :BLOCK

IS. :BLOCK

MEIIU:RETURN

Canadian French ratings)

[3] NEW DTV RATINGS

Repeat steps 1 to 4 of [1] MPAA RATING,

Press OH A/'e' to move the "O" mark to "New DTV Ratings", then press VOL +/-

_PAA

TV GUIBELI_IEB

Cd_ Eaglish Ratings Cdn French A_ling5

_N_I OTV Bali_g_

STATUS :0;_

o The "New DTV Ratings" will only be selectable when a new rating system can be automatically

downloaded via digital broadcasting in the U.S

- If the viewing channel is an analog channel, New DTV Ratings cannot be selected_

Page 26

1 Pa_'ent (_O_'t_'°_ (_=cHiP0P eFatiO_) <C0nti[iued) '''_'r'i II''I ........":i'

o Activating the V-CHIP BLOCK

Repeat steps 1 to 4 of [1] MPAA RATING.

Press CH A/_' to move the "_" mark to "STATUS". Press VOL +/

- to activate the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP

BLOCK will not operate°)

,,,,,,: ,,,,,,,_,:......... J,i:., ...... t

MPAA

TV GUIDELINES

Can English Rali_s C_ French Ratings

Nn_ DTV Rnlings

eSTATUS :ON

(V-CHIP select screen

3 Press MENU, then "INPUT SECRET No." will be displayed

INPUT SECRET No

= If SECRET No. is already set, skip to step 5

Enter a 4-digit secret No. using the REMOTE KEYPAD

QQQ

5 Press MENU and the secret No_ will be registered°

e To temporarily cancel the V-CHIP BLOCK

1 "V-CHIP HAS BEEN ACTIVATED" appears if you view a program

with the same program rating data you configured°

o "V-CHiP HAS BEEN ACTIVATED" will not be displayed if STATUS is

not configured to "ON"

2 Press MENU, then "INPUT SECRET No? will be displayed.

Enter the 4-digit secret No,. using the REMOTE KEYPAD, then V-CHIP BLOCK will be canceled

temporarily. If the wrong secret No. is chosen, "SECRET No IS INCORRECT" wilI be displayed,

Input the secret No again in this case.

GOO

Io®=®i

V-CHIP HAS BEEN ACTIVATED

TV-Y7

_NPUT SECRET No

INI;UT SECRET No

• If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again

Page 27

i : k:.;: _ _............. ,;,,,,, :'r,,, i k:¸ :--o_=_IJH

eTo change the V-CHIP BLOCK after registering a secret No.

Repeat steps 1 to 4 of [1] MPAA RATING, then "INPUT SECRET No" will be displayed.

Enter the 4-digit secret No using the REMOTE KEYPAD and the V-CHIP select screen will be displayed Set V-CHIP BLOCK again,

]_IPUT SECRET t_

IQQ_O

e If you forget or need to change your secret No., clear the original secret No. and set

up a new one.

"i Repeat steps 1 to 4 of [1] MPAA RATING, or 1 to 2 of To

temporarily cancel the V-CHIP BLOCK, then "INPUT SECRET No" wit! be displayed

Press and held both VOL + and CH _ on the TV set simultaneously until the message "INPUT SECRET No," disappears

3 Press the MENU button twice to exit,

(On the Set)

VOL + v CH _k

[

VOL + and CH ,_

buttons

Page 28

I Parent Control (VIEW TIMER) ....... !

[] VIEW TIMER

This function allows you to restrictTV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV.

VIEWING TIME (an accumulative timer: counts only the time duration while theTV power is on,)

o VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10 |

hours) in 30 minutes intervals L V,EV,T,,+,+.

OFF TIME (Restricts TV viewing after the VIEWING TIME reaches --H_4_

zero,) [-- - OFFT+t,+E

• OFF TIME can be set from 30M (30 minutes) to IOH00M (10 hours) in 30 minutes intervals,

STATUS (Select ON to activate VIEW TIMER)

How to set VIEW TIMER

Press MENU to access the MAIN MENU screen

Press CH A/V to move the "_" mark to "PARENT CONTROL:'.

" OVIEWING TIf,_E

--H --M

-- STATUS :OFF

h_ENU

E_SLEEP TBt_ER

_;_VIDEO ADJUS_ _AUDIO SELECT

E3DIGiTAL AUDIO

I_CLOSED CAP_ION

O_PARENT C0_TROL

_,_E_ERGY SAVE _SET UP

(MAIN MENU screen)

3 Press VOL +/- to access the PARENT CONTROL screen.

4 Press CH A/V to move the "@" mark to "VIEW TIMER'L

5 Press VOL +/- to access "VIEW TIMER"..

Press CH A/V to select "VIEWING TIME" and "OFF TIME". For each selection, press the VOL +/- to set the time duration.

Press CH A/V to select "STATUS". Press the VOL +/- to turn

ON the "VIEW TIMER". (If STATUS is OFF, VIEW TIMER will not ope rate, )

_PARENT CONTROL

V-CHIP BLOCK

OVIE_ TIMER

PARENT CONTROL screen

ViEW '[ _I_ER

OV ti_,'_!t_G TI_E

OFF TH,tE

--H --h_

STATUS :OFF

ViEW T f},tEF_

V l&_#_NG T I_,_E

2H OOM

OOFF TU,_E

STATUS :OFF

VIEW TIHER

VIEV_ING Tff,_E

2H OOM

OFF TI_E

5H QOM

@STATUS :0_

8 Press MENU, "INPUT SECRET No,,"will be displayed.

° If SECRET No, is already set, skip to step 10.

iNPUT SECRET No

Page 29

9 Enter a 4-digit secret NOrusing the REMOTE KEYPAD 1 0 Press MENU to exit,

QQ@

/:,},/i, ii

Example:

,, To restrict anybody from watching TV for more than 5 hours, after

watching the TV for 2 hours, your settings would look like the one on the right

o You can choose to watch the 2 hours of TV as you wish,, For example,

you could watch 1 hour of TV, turn the TV off for 30 minutes, then turn the TV on and watch the remaining 1 hour of the VIEWING TIME,

e To change the VIEWTIMER setting after registering a secret No.

1 Repeatstepslto4ofHowtosetVlEWTIMER PressVOL +/-,

and "INPUT SECRET No" will be displayed,

Enter the 4-digit secret No, using the REMOTE KEYPAD, and the VIEW TIMER access screen wilt

be displayed, Repeat steps 5, 6,

vI E_,'4TIMER

VIB_'I_G TIME

2H OOM

OFF TIME

5H OOM

OSTATUS :011

INPUT SECRE_ N_

o When you choose the correct secret No, the VIEW TIMER access

screen is displayed° If the wrong secret No is chosen, "SECRET No IS INCORRECT" is displayed, Input the secret No, again in this case,

To cancel the VIEW TIMER (While the TV set is OFF but the VIEW TIMER is set,)

Turn on the TV; a blue screen message "TIME OVER" will appear,

If you do nothing, the TV will turn off in approximately 30 seconds,

Enter the 4-digit secret No, using the REMOTE KEYPAD. When you choose the correct secret No,,

the VIEW TIMER is canceled,. If the wrong secret No,

is chosen, "SECRET No, IS INCORRECT" is

qD@@

displayed, Input the secret No., again in this case,

SECRET _o _S INCORRECT

TiME OVER

INPUT SECRET No

TIME OVER

IHPUT SECRE'f tlo

Page 30

Par "tC0.tron (wEwTUMER)(C ntin'ued),

/: _./.. :i,,: • ;,,,;,;_,,;,,,:,- ,rr_:rl "'i'" ""_'":..... ,' ',,T¸ ,,r • i..i..i.ii. .... ,,, ,,,,rrr:!_

O TO cancel the VIEW TIMER setting or change the secret No. (If

you forget the SECRET No.)

Repeat steps 1 to 4 of How to set VIEW TIMER Press

VOL +/-, and "INPUT SECRET Noo" will be displayed,

!f_PUT SECRET _o

2 Press and hold both VOL + and CH &. on theTV set simultaneously (On the Set)

until the VIEW TIMER access screen is displayed, Now you can VOL + _" CH _x

cancel the VIEW TIMER settings or change the secret Nor while "_NPUT SECRET No_' is displayed,

VOL + and CH A

buttons

Notice of Remaining VIEWING TIME

• For every 30 minute interval, the remaining time will be displayed for 4 second& For the last 5 minutes, the remaining time wildbe displayed

every minute.

= "0 REMAIN" will be displayed for 10 seconds just before the V1EWING

TIME expires..

VIEW}NG TIME

OH 30M REMAIN

V_EWING TIME

OH 05M REMAIN

VIEWING TIME

0 REMAIN

Page 31

[] SCREEN

This feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on

the environment. When this feature is turned on, it reduces the brightness of the TV to a level that consumes approximately 20

percent less energy than when the feature is turned off. The reduction in brightness will be less noticeable under low

room lighting conditions.

[] STANDBY

If set to OFF" No power save during standby mode,

ON: With power save during standby mode. When

change your TV channel to a digital channel will take approximately 10 seconds to display after TV is turned on.

@@® ®@@

®@®

VOLUME

(+)I(-)

CHANNEL

uP(a)l DOWN(V)

1 Press MENU to access the MAIN MENU screen.

2 Press CH A/V to move the "@" mark to "ENERGY SAVE"

3 Press VOL +/- to access the ENERGY SAVE select screen

Press CH A/V to move the "_" mark to either "SCREEN" or "STANDBY"

5 Press VOL +/- to select"ON" or"OFF"

SCREEN: STANDBY:

EEIBLEEP TIMER Lc_JVIOEOADJUST ECIAUO_O SELECT _DIGITAL AUDIO _CLOSED CAPTIOR ESIPA_ENT CONTROL

e_ENERGY RAVE

[_ISET UP

(MAIN MENU screen)

_ENERGY SAVE

@SCREEN :OFF

STANDBY:ON

ENERGYSAVEselectscreen

_ENERGY SAVE

eSCREEN :OFF

STANDBY:ON

_ENERGY SAVE

eSCREEN;ON

STANDBY:OFF

t I t 1

6 Press MENU to exit. 0

= If STANDBY mode is set to "ON", when you turn on the TV set within approximately 15 seconds you

are not allow to turn the power off, "Please Wait" will display on the screen,

3'I

Page 32

[] EZ Setup

By operating the channel preset functions, you can preset your TV to the desired channels for viewing.

1 Press MENU to access the MAIN MENU screen. 2 Press CH A/_' to move the "_" mark to "SET UP".

Press VOL +/- to access the SET UP screen, then press CH A/V to move the "@" mark to "CH SETTING".

l# °_.................. [' _ VOLUME

il .o,c:)_o.o Ii! .+ !,

CHANNEL

tit uP(A>i

/_ '{' .... _ ._1 DOWN(V]

IIL o .IIMENU

_SLEEP TIMEH $_WIDEO ADJUST E_AUbIO SELECT

_DIGITAL AUDIO _CLOBED CAPTION

_5_PARENT CONTHOL [_£ENEHGY SAVE

@_SET UP

(MAIN MENU screen)

_BET UP

BLUE SCREEN PERSONAL PREE UNIVERSAL PLUS

LANGUAGE

ODH _ETTING

AUTO INPUT

6HtI_PUT ID SCRBEN FORMAT

(SET UP screen)

4 Press VOL +/- to access the CH SETTING screen

5 Press VOL +/- to access the EZ SETUP screen

Press VOL +.

The tuner will automatically search for the broadcasting and cable TV channels for ANALOG (The CH No. will automatically increase when it

appears ) Once tuning for analog AIR channel is finished,

tuning for digital channel will start. If cable TV

channels is detected, it will not proceed to digital channel tuning.

If you want to stop the EZ SETUP process once it has started, press VOL - and it will be canceled.

To cancel EZ SETUP

Press VOL -.

(STOP)

(START)

CH SETTING

oEZ SETUP

AIRiANAtOG CABLE A_ALOG CH SEARCH DIGITAL OH SEARCH

CH _E_,_OHY

ANTENNA SETUP-DIGITAL

(CH SETTING screen)

COR#ECT ANTENNA OR CABLE

START EZ SETUP?

eSTOP START

(EZ SETUP screen)

(Analog channel tunning)

PLEASE WAIT AUtO PROGHAM_JtNG

STOP @START

(Digital channel tunning)

PLEASE WAIT

AUTO PROGR_,_I4II_G

DIGfTAL 69

SIOP OSTARI

Page 33

Once EZ SETUP is complete, the lowest channel number [

memorized will be displayed. I

[] Channe! Setting

If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel,

1 Press MENU to access the MAIN MENU screen

2 Press CH A/V to move the "_" mark to "SET UP",

3 Press VOL +/- to access the SET UP screen,

4 Press CH A/V to move the "_" mark to "CH SETTING"

5 Press VOL +/- to access the CH SETTING screen,

otf the viewing channel is an analog channel, Antenna

Setup-Digital cannot be selected

* During Cable mode, Digital Channel Search and

Antenna Setup-Digital cannot be selected

_SLEEP TIMER _VIDEO ADJUST _AU5}O SELECT _DIGITAL AUDIO _CLOSED CAPTION _PARENT CONTROL

_E_EBGY SAVE

(MAIN MENU screen)

_SET UP

BLUE SCBEER

PERSORAL P_EE

DHIVERSAL PLUS

LAtfGUAGE

OCH SETTING

AUTO _HPUT CHIINPUT _D SCREEN FOR_,!AT

(SET UP screen)

CH SETTlinG

eEZ SETUP

AIRIANALOG CABLE ANALOG 6H SEARCH _iGITAL C_ SEARCH CN MEMORY MITENIIA SETUP-DIGITAL

(OH SETTING screen)

Press CH A/V to move the "@" mark to "AIR!ANALOG CABLE",

then press VOL +/- to access the AIR/CABLE screen,

Press CH A/_' to move the "_" mark to the desired mode.

[_=tOABLE STD!=l CABLEHRCI= [ CABLEIRC]_-]

8 Press MENU to exit, 0

• Receivable channels of your TV set are: AIR channels:

VHF: 2 through 13. UHF: 14 through 69.

• Digital channels can only be tuned when receiving AIR channels.

CABLE channels:

1 (HRC and IRC mode only) 2 through 125 (STD, HRC and IRC)

CH SETTIt4G

EE SETUP

QAiR(ANA_QG CABLE

ANALOG BH SEARCH DIGITAL CH SEARCH CH MEMORY ANTENNA SETUP.,DIGITAL

A IRIANALOG CABLE

CABLE S35

QCABLE HBC

iCA@LE IBC

(AIR/CABLE screen)

Page 34

ANALOG CH SEARCH Saving ANALOG broadcast TV channels into memory

Repeat step i to step 5 of Channel Setting. (See page 34) Press CH A/_' to move the "_" mark to"ANALOG

CH SEARCH".

CR SETTING

EZ SETUP

A_R/ANALOG CABLE

@ANALOG CR SEARCH

DIGITAL CH SEARCH

OH MEMORY ANTENI+A SETUP-DIGITAL

(CH SETFING screen)

.) Press VOL +/- to access the ANALOG CH

SEARCH screen.

b start: (START)

Press VOL +o The tuner will search through all _

CN SEARCH

@STOP START

available channels in your area and add them into the TV memory,.

(CH SEARCH screen)

'o stop: (STOP)

Press VOL -, CH SEARCH will stop at the current

channel and will not add any higher channel&

Press MENU to exit, O

Note:

o If you press VOL + again whi}e in the CH SEARCH mode, auto-program will start again, and tile

previously memorized channels will be lost.

DIGITAL CH SEARCH

Saving DIGITAL broadcast TV channels into memory

i CH SETTINGRepeat step 1 to step 5 of Channel Setting,, (See page 34)

Press CH ,_k/v to move the"_" mark to "DIGITAL

CH SEARCH".

EZ SETUP AIRIANALOG CABLE AI_ALOG CH SEARCH

@DIGITAL CH SEARCH

CH MEMORY

ANTENNA SETUP-DIGITAL

(CH SETTING screen)

! Press VOL +/- to access the DIGITAL

CH SEARCH screen

SH SEARCH

o start: (START)

Press VOL ++ The tuner will search through all ,_,_,_

OSTOP START

available channels in your area and add them

into the TV memory

(CH SEARCH screen)

o stop: (STOP)

Press VOL -,, CH SEARCH will stop at the current

channel and will not add any higher channels+

I Press MENU to exiL (_ ,Jote: _>

o If you could not select DIGITAL CH SEARCH, please select CH SETTING - AIR/ANALOGE CABLE -

AIR (See page 34)

Page 35

o .....iiii 11......... p (Continued)

[] CH MEMORY

Adding weak or additional channels or erasing unwanted channels from TV memory

I CH SETT I_GRepeat step I to step 5 of Channel Setting. (See page 34)

Press CH _,/V to move the "_" mark to "CH MEMORY'L

2 Press VOL +/- to access the CH MEMORY

screen

3 Use CH A/V to select each desired channel to

add or erase°

Press VOL + to add a channel to theTV memory

or press VOL - to erase a channel from the TV memory.

VOL +

,_,_c.Y To add channel 10 to

,,, ,E the TV memory=._-

VOL -

(CH MEMORY

unmemorizedchannel)

To erase channe] !0 from

the TV memory

AI_ H}

ERASE @_DO

(CH MEMORY

memorizedchannel)

EZ SETUP

AIRIAttALOG CABLE ANALOG CH SEARCH

DIGITAL CH SEARCH

eCH _{E_0RY

A_TE_HA SETUP-,DIGITAL

(CH SETTING screen)

CH _EMORY

AIB 10

OER_SE ADD

(CH MEMORY screen

5 Press MENU to exiL C)

o All analog channels and digital channels which were tuned during EZ SETUP or DIGITAL CH SEARCH

can be selected,

• When new digital channels is appear, please perform EZ SETUP or DIGITAL CH SEARCH

Page 36

.....setUP(c°ntinued)

,,,, ,, ,,,,q','H_,'Lr' ,_ ,-,

BLUE SCREEN

Automatically turns the screen blue if a broadcast signal is not received. After 15 minutes of non-reception, the TV will turn off

automatically°

Press MENU to access the MAIN MENU screen, Press CH AtV to move the "_" mark to "SET UP",

Press VOL +t- to access the SET UP screen,

®@®

(_ (_ (_) VOLUME

_@_@® (+);(-)

_C_ CHANNEL

UP(A)/

@ DOWN(V)

OL___ 0

_,_ENU _SLEEP TIMER

L_VIDEO ADJUST _AUDJO BELECT _DIGITAL AUDIO

##._CLOSEDCAPTION _PARENT CONTROL

_'_EUERGY SAVE

@_BET UP

(MAIN MENU screen)

_SET UP

@BLUE SCREEN

PERSONAL PRER UNWEREAL PLUS

LANGUAGE ON SETTING AUTO INPUT

CH/INPUT ID SCREEN FORMAT

Press VOL +/- to access the BLUE SCREEN select screen.

Press VOL +/- to select "ON" or"OFF",

Press MENU to exit,

When the BLUE SCREEN is set to "ON"

Power turns off

No signal Blue screen

---J-----4r,t_l..

automatically

after 15

minutes

Standby mode

(SET UP screen)

BLUE SCREEN:OFF

BLUESCREENselectscreen'

BLUE SCREEN:ON

, Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function

despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN "OFF".

While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if BLUE SCREEN is turned on.

Page 37

"::' ::.I

[] Personal Preference REMOTE

By setting PERSONAL PREFERENCE channefs in advance, you KEYPAD

can select your favorite channels easily,,

PERSONAL-

PREFERENCE

®®0

® ®IIr VOLUME

_! HANNEL

'%_ "8' L11MENU

UP(A)/ DOWN(V)

1 Press MENU to access the MAIN MENU screen.

2 Press CH A/_' to move the "0" mark to "SET UP".

Press VOL +/- to access the SET UP screen, then press

CH A/V to move the "0" mark to "PERSONAL PREE".

4 Press VOL +/- to select the

PERSONAL PREFERENCE select screen in which you can program 4

favorite channels, in 4 different

categories. (total of 16 channels)

(duringviewingAnal0_DigiIatchannel)

PERSONALRRE_

<A> B C D

0 ....................

ENTER:C0/IF IRM

(PERSONAL PREFERENCE select screen)

t,IENU

EE]SLEEP TI_IER B_V_DEO ADJUST EZIAUDIO SELECT _DIGITAL AUDIO

_CLOSED CAPTION EE3PARENTCONTROL

_ENERGY SAVE

@_SET UP

(MAIN MENU screen)

_EET UP

BLUE SCREEN

@PERSONAL PREE

UNIVERSAL FLUS LAt_GUAGE CH SETTING AUTO INPUT

CH/INRUT IO

SCREEN FORe,AT

(SETUP screen)

(duringviewingcable channei

PERSONAL FREF

,=A_ B O D

O ............

ENTER: CONF_R_,_

* Below is using Analog/Digital channel OSD to explain

Press VOL +/- and CH ,6./_' to move the "O" mark to the desired

position

PERSONAL PREF

<A> B C D

and

ENTER: CONF IRW

6 To input CHANNEL Number, press REMOTE

KEYPAD on the Remote. Then press ENTER to register the CHANNEL Number into memory.

o Press INPUT to register the INPUT mode into

memory

Example: 25 -- Press"2", "5" and"ENTER".

4 -- Press "4" and "ENTER".

22.5 -- Press "2", "2", ".", "5" and "ENTER". To reset a registered CHANNEL Number, input "," twice..

, "o"can not be enter as channel number but will function as reset registered Channel Number when

input twice.

o Only 3 digit numbers are allow to input for cable channel.

PERSONAL PREP

•_A> B O D

• 25 4

2_5 ...............

ENTER: CONFIR_,I

Page 38

P' Repeatsteps5 and6 to registerthe nextCHANNELNumberorINPUTmode

} Press MENU to exit. O

To select the PERSONAL PREFERENCE channel. If the channels are memorized as shown on the right,

press the Remote's "A" button to select the channels below

[-_ 25 --*4"-" 225 q

Note: _>-

o If the channel number input does not exist, warning message as shown

on the right wifl appear,

Universal Plus Function

VCR or DVD input mode will be selected automatically by

pressing the VCR/DVD PLAY button on the Remote Control

I Press MENU to access the MAIN MENU screen.. ! Press CH A/_" to move the "@" mark to "SET UP".

VOLUME.

(+)/(-)

PERSDt_AL PREF

cA> B C g

¢ 25 ...............

22 5 ...............

ENTER:CONFIRM

,0.0 _0 o0

P,_EIR/

E_i]ELEEPTI_ER _]VtDEO ADJUST

EE]AUD_O SELECT E]_DIGITAL AUDIO

_OLOSED CAPTION

_PAREI4T CONTROL

_EI;ERGY SAVE

e_SET UP

CHANNEL UP(A)/

DOWN(_r)

MENU DVDNCR

PLAY

t Press VOL +/- to access the SET UP screen,,

Press CH A/V to move the "@" mark to "UNIVERSAL PLUS'L

Press VOL +/- to access the UNIVERSAL PLUS select screen

to select VCR or DVD mode.

(MAIN MENU screen)

_SET UP

eBLUE SCREEN

PERSONAL PBEE UNIVERSAL PLUS LAItGUAGE CH SETTIHG AUTO INPUT CHIINPUT ID

SCREEN FORMAl

(SET UP screen)

@SET uP

BLUE SCREEN PERSONAL PREE

OUNIVERSAL PLUS

LANGUAGE CH SETTING

AUTO TNPUT CHII_PUT IU SCREEN FORMAT

UNIVERSAL PLUS

OVCR :OFF

DVD ;OFF

UNIVERSALPLUSselectscreen

Page 39

Press CH A/V to select the VCR or DVD, and press VOL +/- to select "CH3", "CH4", "INPUT t", "INPUT 2", "INPUT 3

(COMPONENT)" or "OFF"..

CH3 _ CH4 _ INPUT t _ INPUT2

---- OFF _ INPUT 3 (COMPONENT) ,_

U_HVEBSAL PLUS

eVCR :CH_

_DVD :OFF

Switch to the input mode your VCR or DVD is connected to If connected

through RF (antenna terminal), select

either CH3 or CH4 to match the setting of the VCR or DVD

7 Press MENU to exit 0

:Auto anput :

e The unit is preset to switch to the INPUT 2 screen automatically I_ 6"°_'_",_:> _1r VOLUME

when VIDEO equipment is connected to the INPUT 2 terminal Do ' ., (/(-) the following to switch this feature AUTO or OFF: It__ CHANNEL

IJi ,_,T'-_-_ UP(&)i

i:I? o, 41DOWNC,

1 Press MENU to access the MAIN MENU screen.

2 Press CH Air to move the "@" mark to "SET UP"

H I 0! ,It

E!_SLEEP TINEB _;;_VIDEOADJUST _,-_-,AUDIOSELECT _D_G]TAL AUDIO _CLOSED CAPTION

_,_:_PARENTCONTROL _ENERGY SAVE

e_SET UP

3 Press VOL +/- to access the SET UP screen, then press CH ,&!V

to move the "_" mark to "AUTO INPUT".

4 Press VOL +1- to access the AUTO INPUT select screen_

Press VOL +/- to select "AUTO".

5 You may turn off"AUTO INPUT" when it is not in use

Press VOL +/- to select"OFF",.

(MAIN MENU screen)

_SET UP

BLUE SCREEN PERSONAL FREE UNIVERSAL FLUS LANGUAGE

CU SETTING

eAUTO _NPUT

CNHNPUT ID

SCREEN FORMAT

(SET UP screen)

AUTO H{FUT :AUTO

INPUT2)

AUTO INPUTselect screen'

AUTO INPUT:OFF

UHPUT2}

Press MENU to exit. (_ 3£

Page 40

.......................... _,

o You can assign an ID label to each Analog channel or input mode.

These ID labels can be 4 characters long maximum and will be

displayed along with the channel number/input mode when the labeled channel is selected.

(Example: labeling air channel 10 "TV12",)

1 Press MENU to access the MAIN MENU screen,

Press OH A/V to move the "O" mark to "SET UP'L

'Q (_) (_)_{-- REMOTE

®®I tl KEYPAD

® lit VOLUME

HIt+)l/-)

-- _ CHANNEL

_'__!J DOWN(v)

, #UTE I 1

Q o ,I MENU

¢_SLEEP TINEB

[I;_VtDEO ADJUST _AUOtO SELECT E_DIGITAL AUDIO

_CLOSED CAPTION t_PARENT CONTROL _ENERGY SAVE

_SET UP

(MAIN MENU screen)

(_3SLEEP TIMER Ilk/]VIDEOADJUST

E2AUBIO SELECT E_DIGITA[ AUDIO

g_,CLOSED CAPT]O_

_PARE_T CONTROL _ENERGY SAVE

O_SE_ UP

Press VOL +/- to access the SET UP screen then press

CH A/V" to move the "_" mark to "CH/INPUT ID'.

Note:_:>

o If you are viewing a digital channel, "CH/INPUT ID" cannot be set

_- Press VOL +/- to access the CH/INPUT ID screen.

@SET uP

BLUE SCREEN PERSOOAL PREF

UNIVERSAL PLUS LA_IOUAGE CH SETTING AUTO INPUT

@CHtlNPUT ID

SCREEN FORMAT

(SET LIPscreen)

CHt INPUT _b

AIR IO

OID ....

(CH/INPUT ID screen)

Page 41

C /Input ID (Continued) .....

I _; .................................... I1,IIIII_.I_1 I I I _............... HPUIII[III_¢_I_LLI I , ....

5 Use CH _./V to select each desired channel to label

Press INPUT on the Remote to label the INPUT mode

ID: Labeling the channel name Press VOL +/- to select "lD" then press VOL + to select the

first character. Press CH A/V to enter a desired letter Press VOL +/- to enter the next desired letter. Press MENU to return

to the CH/INPUT ID screen.

Selectable characters: Space: _

Alphabets: A-Z Numbers: 0-9

Symbols:-- . & ( ) / +

_ MENU

QID : ....

RESET

_,tENU: RETURI_

(ID Input screen)

ID :TV12

R_SET

MENU: RETURN

Example TV 12

RESET: Resetting the ID to ....

Press CH A/V to move the "_" mark to "RESET", then press

VOL +/-. The previously set ID will return to .... .

iD :TVl2

eRES_T

_,_Et,_U:RETURt_

ID :....

€RESET

_E_IU :RETURR

6 Press MENU to exit. Q

° The maximum number of ID labels available to register Analog channel names is 20 for AIR channels

and 40 for CABLE channels.

o If you wish to register a new ID when all the available ID labels are assigned, delete a registered ID

to make room.

Page 42

o The format of the picture can be adjusted to either of the three I1 ,.-_."_:_"_"F-_ttr VOLUME

screen formats, ifQ_._7-i , ,,-,

(_his,unot,onallowsyo,,toview,.:9pict.resrocorde,onOVO,°_© !_!C.AN.EL

or by camcorders that are once saved using the 4:3 aspect ratio /_ _ '_-TF uP(A)/

,o_o.,a_o._ao.,°t.oo..,n°,.,..-.on.._,0-_,o._°t._.,l_.'r :_,tl0o__,_

"_ _ _" _"_ MENU

1 Press MENU to access the MAIN MENU screen 2 Press CH zk/_' to move the "_" mark to "SET UP".

Press VOL +/- to access the SET UP screen, then press CH &!V

to move the "_" mark to "SCREEN FORMAT'.

Press VOL +/- to access the SCREEN FORMAT select screen_

o If the viewing channel is an analog channel, INPUT 1,

INPUT 2 and INPUT 3, STRETCH cannot be selected,

_,_ENU _SLEEP TIMER

_VIDEO ADJUST _UDIO SELEC_

_DIGITAL AUDIO _#DLOSED CAPTION _PARENT CONTROL _ENERGY SAVE

e_SET UP

(MAIN MENU screen)

_BE_ uP

BLUE SCREEN PERSONAL PBEP UNIVERSAL PLUS LANGUAGE

CH SETTING

AUTO INPUT CHI_NPUT _D

@SCREEN FORMAT

(SET UP screen)

SDREEI,t FORMA'I

S_RBTCH

a4:3

_6:9

SCREENFORMATselectscreen

5 Press CH A/V to select "STRETCH", "4:3" or"16:9".

SCREEI,! FORMA'[

STRETCH

0413

16:9

Page 43

.............................. ..................''r'" 11

I Screen Format (Continued) '_..................... ,_,_,i""_",

6 Press MENU to exit,. ME.U

Example:

While format of signal received

Full 16:9

O O

Side panel 16:9

Normal 4:3

Mode set to

STRETCH

Mode set to 4:3

Mode set to 16:9

ooo1

Letter Box 4:3

OoOO oo

o The STRETCH and 16:9 screen format will be cancelled when the AC power cord is unplug.

o If STRETCH mode is selected, the quality of picture might be poor. o This function can be selected independently among AIR/CABLE, INPUT 1, INPUT 2, INPUT 3

(COMPONENT) and Digital Channel.

o0o

Page 44

e Connecting video equipment for playback of video material.

o To view video material from external video equipment, make sure to connect the equipment properly

to the input terminals on the TV set,

f -.,,

Connecting video device equipped with video output terminals

VIDEO EQUIPMENT

ICAMCORDER]

_VGAME]

(Front connection terminals of TV)

To AUDIO OUTPUT (L)

_,_ Ull,,,,n i i

To AUDIO OUTPUT (L)

*_u, i ,i,n,, un

To AUDIO OUTPUT (R)

.._

(Rear connection terminals of TV)

....:,o.v,:::_ ,___Y_.__-___....i_

Puil open the front door

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

..<I

To AUDIO OUTPUT (L) To VIDEO OUTPUT

Yellow : To video input terminal

White : To audio input (L)terminal

Red : To audio input (R) terminal

,i,i, i ..... lUll'

Page 45

Notes:

° COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback

image than the image from IN 1 S-VIDEO terminal

o The IN I S_VlDEO terminal is used to obtain a higher quality image by importing image signals

• The S-VIDEO terminal is for the video image only To receive an audio signal, connect the audio

cable to the IN t AUDIO terminals (left and right),,

(Rear connectionterminals ofTV)

UNe N'_: : :

TO S-VIDEO OUTPUT I ,... (When your video !

equipment has an ! S-VIDEO output terminal )

"', To VIDEO OUTPUT

_To AUDIO OUTPUT {L)

To AUDIO OUTPUT (R)

To AUDIO VIDEO OUTPUT OUTPUT (L/R) _ _ Terminals

Video Equipment with Component

video (ComponentColor) OutputTerminals(Y,PBand PR)

e To watch video material playback

= Press the Remote's INPUT button to select the VIDEO INPUT mode for the video equipment you

wish to play.

• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed,

l CABLE Rear Front Rear

, When the AV cables are connected to the VIDEO INPUT 3 and COMPONENTY, P8 and PRterminals

simultaneously, the COMPONENT terminal has priority over the VIDEO terminal,

= INPUT mode can be selected by pressing either the CH ,&on theTV remote control when the TV is

set to the highest channel stored in memory, or by pressing the CH V"when it is set to the lowest channel,

o When connecting video or audio equipment to the television, be sure that the power is turned off in

order to prevent damage to either the television or the equipment being connected,

o The S-Video terminal has priority over the VIDEO terminal (IN 1), When you wish to use video equipment

connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal.

. For detailed information on the connection and use of auxiliary equipment, refer to the instruction

manuals of the equipment being used.

- The connection cables/cords can be obtained from your local video store.,

Page 46

Using the Audio Output TerminaBs

J These terminals are used for connecting an external audio amplifier. The STEREO/MONO/

SAP, VOLUME, MUTE and FAO functions can all be controlled via the television's remote control or directly on theTV itself.These terminals relay the audio signal of all programs being displayed

on theTV screen.

(AUDIO OUTPUT terminals are located on the rear of the cabinet.)

(Rear connection terminals of TV)

To the audio input terminals

I) Before connecting the cables, turn on the TV and adjust the TV volume for a moderate listening level. !) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT terminals on the TV

l) Turn the TV set and stereo amplifier on. _) If you desire, you can turn off the sound of the TV's internal speakers by accessing the TV's AUDIO

SELECT screen. See pages 16, 17.

i) Adjust the volume control on the stereo amplifier to a moderate listening level. }) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,

MUTE and FAO), from either the remote control, or directly from the TV set..

i Stereo Amplifier I I SpeakerSystemJ

I::

_ote: _>

. For detailed information on the connection and use of auxiliary equipment, refer to the operation

manuals of the equipment being used

. When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio

connection cord and plug adaptor as shown below.

. When FAO is set to "OFF", we recommend you to keep the TV's audio output Ievel high for optimal

sound quality (see page 16)

To the TV

__--,_'z.__ _ being connected Pin plug x 2 Pin Plug Pin jacWMini plug

P_g adapter ,_,.To the equipment

Page 47

Universal Remote Control With the purchase of your television set you

also have received the latest innovation in remote control technology. With its easy-to-use

push button keyboard, your Remote can

control your television set and most infrared

remote controlled VCRs, cable TV converters

and DVDs as well.

o Depending on the model year produced, brand

and type of VCR, cable TV converter and DVD, some models may not be compatible with the

remote control.

o Some brands may not enable channel

selection until the ENTER is pressed In such case, try the following

Example: When you select channel 24,

(1) Press REMOTE KEYPAD "2". (2) Press REMOTE KEYPAD "4'L (3) Press ENTER.

For detailed information on the use of the Cable TV converter Box refer to their operating

manuals Using your Remote with yourTV

After installing the batteries, set the CATV/ DVD-TV/VCR on the Remote to the TV

position, (If you can change the channel of the

TV by pressing CH A/_' on the Remote

Control, it is in the TV position.)

DVD/VCR POWER

Press to turn the VCR or DVD on and off

PLAY

Press to playback a tape or disc,

REWIND .,_4_ Press to rewind a tape or

reverse a disc, For some VCRs or DVDs you may need to press

STOP first, then REWIND

PAUSE a_ Press to temporarily stop the

tape or disc during playback or recording (VCR only)

Press again to release PAUSE

STOP fa Press to stop the tape or disc

"ldentifying'VCRs, cableTV converters and

DVDs

Your Remote Control has been set at the factory to operate your TV and many remote

controlled VCRs, cable TV converters and DVDso However, in some cases an easy one-

time set-up step may be necessary before the

Remote will operate accessory VCRs, cable

TV converters and DVDs,

In this set-up step, the Remote locates and memorizes the remote control transmitter code

for the VCR, cable TV converters and DVDs,

Once "identified", the Remote sends proper signals to operate your accessory

This identifying step will not have to be repeated until power to the Remote is interrupted due to a battery failure

Using your remote control with a MCR Once you make certain the Remote Control

has "identified" your remote controlled VCR or DVD, the Remote is ready to operate your unit,

The various VCR or DVD function buttons on the Remote will not operate your VCR or DVD

if those features are not already found on your unit.

All VCR buttons will operate whether the Remote is in TV or VCR modes.

For detailed information on the use of the VCR or DVD, refer to the operation manual of the

VCR or DVD

-- REMOTE KEYPAD Use to enter two-digit code

numbers when identifying your VCR, DVD and CATV converter

--ENTER

-- FF 1_ Press to rapidly advance the

tape or disc For some VCRs or DVDs, you may need to press

STOP first, then FE

-- VCR CHANNEL UP (,&)/DOWN (V)

Press to scan up or down through channels on the VCR

DVD SKIP Press to jump forward to the

beginning of the next chapter/trac or backward to the beginning of tl"

current chapter/track, and automatically start to play that

chapter/track RECORD e

Press to begin recording (VCR only)

Page 48

DVDNCR POWER

DISPLAY

,,,

CHANNEL

l,_EiIU

e How to identify aVOR

The remote control may already be set to operate your VCR Try this initial check before

going on to the following "identifying" section.

(1) Slide CATWDVD-TV/VCR switch to VCR, (2) Point the Remote towards VCR and press

POWER (DVD/VCR)

(3) Does the Remote turn theVCR ON and OFF?

o tf yes, the Remote is ready to operate the VCR

and no further steps are needed.

o If no, continue to the "identifying" section,.

Setting Method Refer to the following steps and list to quickly

find the remote control code for your accessory VCR

• First look up your VCR's remote control code number before going through the Setting

Method.

[1) Slide CATWDVD-TViVCR switch to VCR

12) Press and hold down DISPLAY and CH _' on your remote control.

Then release both buttons

13) Within 10 seconds after releasing DISPLAY and CH v, enter your VCR's two-digit remote

control code number using the REMOTE

KEYPAD (refer to the list )

o The remote control is now ready to send

commands to your VCR Some brands have more than one remote code

listed, due to changes in the remote codes

from early to later model years, or due to format differences (VHS/BETA), In such cases, you

may have to try more than one code to find the code your VCR accepts,

_,tUTEt_! UP (-&)/

oJI DOWN

Ill CATV/DVD-

Ill ......

REMOTE CONTROL

VCR BRAND CODENUMBER

Akai Audio Dynamics

Broksonic Canon

Capehart Craig

Curtis Mathis Daewoo DBX

Dynatech Emerson

Fisher Funai GE Goldstar Hitachi

Instant Replay

JC Penney JVC

Kenwood Lloyds

Magnavox Magnin

Marantz Memorex

Minolta Mitsubishi

Montgomery Ward Muttitech

NEC Panasonic

Pentax Philco

Phifips Quasar

RCA Realistic

Samsung Sanyo

Scott Sears

Sharp Shintom

Sony Sound Design Sylvania Symphonic Tatung

Teac Teknika Thomas TMK

Toshiba Video Concepts

Yamaha Zenith

25,26,37

15,22, 30

32 04 34

t0,31 O4 34

15,22,30 29

21,32, 35 09,!0,11 28,29

24 O6 O4

04,06,24,30

I5,41,42 14,15

29 04,05,08

30 04,!0,24,29

17,18,39,40 02,43 29

15,22,30 04,44,45 05,06 04,05 04,05,06 04 06,07,33 01,02,10,24

23,3t

14, t0

20 06,11,24

01,02,03 36

12,13,38

29 04,05,08 29 t5

15,29 27,29 29 21

19,20 30

15,29,30 16

Note:

Depending on the model, year produced, brand, and type of VCR, some models may

not be compatible with the remote control

Page 49

i_ 0Peration Of Universal Rem°te"C°nt_°_'(rC°rn':tinl_ed)i, , ,,i . _,, r , ,, i,, _ ,,,,':i'"' 1

.............DVDNCR

zvPOWOO

_" llt_JJ'---_ 't" "'_INPUT

=v _ _ _ POWER

Ill Ill

0,S.A

.CD _CD_CD DO

_4E#U

o o Ell

(E£) CE::)_DZ_"__.Ay II TVNCR

PAUSE s"roF" REC cl_p |

e Howto identify a DVD

The remote control may already be set to operate your DVDoTry this initial check before

going on to the following "identifying" section,

(1) Slide CATV/DVD-TV/VCR switch to DVD (2) Point Remote towards DVD and press DVD/

VCR POWER

(3) Does the Remote turn the DVD ON and OFF?

o If yes, the Remote is ready to operate the DVD

and no further steps are needed

o If no, continue to the "identifying" section

Setting Method,

Refer to the following steps and list to quickly

find the remote control code for your accessory

DVD,

o First look up your DVD's remote control code

number before going through the Setting Method,,

(1) Slide CATWDVD-TViVCR switch to DVD (2) Press and hold down INPUT and OH _f on

your remote control. Then release both buttons,

(3) Within 10 seconds after releasing INPUT and

CH _', enter your DVDs two-digit remote

control code number using REMOTE KEYPAD

(refer to the list)

o The remote control is now ready to send

commands to your DVD

.UTE CHANNEL

°* III °OWN(,)

DVD_ CATV/DVD-

DVD BRAND REMOTE CONTROL

Denon

JVC

Magnavox Marantz

Mitsubishi Panasonic

Philips

Pioneer Proscan RCA

Samsung Sharp

Sony

Toshiba

Yamaha

Zenith

Depending on the model, year produced, brand, and type of DVD, some models may

not be compatible with the remote control

CODE NUMBER

O2 09 04 O4

O6 02

04 08

03 03

01, 05

04 02 04

Page 50

OperatuonofunaversatRemotecontroB(ContinUed)

TV POWER

_i DVDNCR ,_ 'K '-" ',, DISPLAY

aEUOTE' ®:::® ®l

KEYPAD ...... ....

_O BO cO 00

_.t_,u CHANNEL

O c:_ T_ UP (zk)/

(:_0 E23 I_Z_RE"/Puny I TVNCR

PAU$_. STOP

e How to identify a cable converter

Setting Method,

Refer to the following steps and list to quickly find the remote control code for your cable TV

converter.

o First look up your converter's remote code

number before going through the Setting Method below..

(I) Slide CATV/DVD-TV/VCR switch to CATV. (2) Press and hold down DISPLAY and CH V on

your remote control.. Then release both buttons

(3) Within 10 seconds after releasing DISPLAY

and CH V. enter your converter's two-digit code number using REMOTE KEYPAD (refer

to the list).

o The remote control is now ready to send

commands to your converter

• Some brands have more than one remote code listed due to changes in the remote codes from

early to later model years° In such cases, you may have to try more than one code to find

the code your converter accept&

POWER

D_J_L_I DOwN (v)

CATViDVD-

CATV CONVERTER REMOTE CONTROL

BRAND CODE NUMBER

Anvision Cable Star Eagle

General instrument

Jerrold

Magnavox

Oak Sigma

Panasonic Phitips

Pioneer Randtek RCA Scientific Atlanta

Sony Viewstar

Zenith

07,08 07,08 08

04,05,15,23,24,25, 30,36 04,05,15,23,24,25 30, 38 07,08,19,25,28,29, 32,33.40,41

18 27,39 07,08,19,26,28,29,

32,33.40,41 !8,20 07,08 27,43

03,22,42 44

07,08,19,26,28,29 32,33,40,41

Note:j_

Depending on the model, year produced, brand, and type of CATV converter, some

models may not be compatible with the remote

control

Page 51

Check these items and see if you can correct the trouble with a slight adjustment of the controls

{:3

QUICK SERVICE _ _ _o_ -_

-o E _E

CHECK LIST _ o _ __

,o o o _ u) r" o

__ o o __ 50oa

== _ c

"U 5 o0 =.=

_> _ _,_ o

_,_ g _.==bz _ ,,,=

ZLU C(3 o-0POSSIBLEREMEDY

z_ 0c b_ _ z o7. LU_ o<

......Trya newchannel,if OK, thenthere is

a possiblestationtrouble Is TV plugged in? Powerat outlet?

Is TV'sPOWER buttonon? ts antennaconnectedtoterminal on

theback oftheset? If outsideantennaisbeing used,

checkfor brokenwire

Checkfor local interferenceor external

electricalnoise Turn offthe POWERand then turn it

on afterabouta minute. Adjust COLORcontrol

Adjust PICTUREcontrol CheckexternalVideo/Audioproducts:

look forloose/brokenconnection leads (Refertopages45-47)

Checkbatteriesof Remote Control Slide CATV/DVD-TViVCRSelect

SwitchtoTV position. Are audiocablesconnectedfirmly?

Checkthevolumelevel. Is SPEAKERON?See pages 16,t7.

ChangeClosed Captionmodeto "OFF"/EnergySavemodeto "OFF".

Unplugthe TV and plug it inagain after2 minutesor longer

X X .........X

x x

X ' X

X X X X X X X X X X X

x x x x x x

X X XX X _ X XXX

X X X X X X

_ X

.............. X ' ' --IX [

x x Ix

X X X X X

I [ X X XX X X

X X

,,i

X X

o If no TEXT broadcast is being received while viewing in the TEXT

mode, the screen may become dark and blank for some programs Should this occur, switch the Closed Caption mode to "OFF"

(Dark and Blank Picture)

z .......

! Calling for Service : [

For Iocation of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,

or customer assistance, please call 1-800-BE-SHARP

Page 52

[] The warning message about reception of digital broadcast

The example of an warning

message displayed on a screen

o Failed to receive broadcast.

o No broadcast now.

• Check the antenna cable Check that the antenna is correctly antenna setup,

• Check the broadcast time in the program guide

iSpecifications

MODEL Receiving System

Stereo Broadcast

Reception Channels

AIR

CATV Digital Terrestrial

Broadcast (8 VSB)

Channel Tuning Antenna Input Impedance Screen Size 27- Diagonally Measured

VHF 2-13 ch UHF 14-69 ch

27SF56B

American TV standard ATSC/NTSC system

MTS/SAP

1-I25 ch

2-69 ch

181-channel Reception PLL tuning system

VHF/UHF 75 ohm Unbalanced

Possible Solution

Terminals Audio/Video input x 3 (Front x 1, Rear x 2)

.S-Video input x 1 (Rear)

COMPONENT x 1 (Rear)

Audio output x 1 (Rear)

Anti__ennax I (Rear) Sound Output Power Source

Power Consumption 140 W Dimensions 25 3/4"(W) x 23 3%4" (H) x 19 _%4" (D)

Weight (approx) 94,8 fbs (43 kg)

• Design and specifications are subject to change without notice,

5 W (RMS) x 2 AC 120 V, 60 Hz

"654 mm (W) x 5995 mm (H)504 mm (D)]

Page 53

(ESPAI OL)

Lea estas instrucciones cuidadosamente y cons_rvelas a la rnano para consultarlas en el futuro IMPORTANTE

Sfrvase anotar el modelo del televisor y los numeros de serie en el espacio provisto, para ayudar a reportar en caso de

p_rdida o robo Los ntJmeros est,_n ubicados en la parte posterior deI televisor

N° de modelo :

N° de serie :

i BNFOI=MACm6N nMPORTANTE .......

Existen dos razones importantes para registrar dentro det plazo I[mite la garanfia de su nuevo televisor SHARP, mediante la TARJETA DE REGISTRO inctuida con el aparato

PRtMERA - GARANTiA

Garantiza al cliente _arecepciSn inmediata de todas las prestaciones de consumidor en cuanto a piezas, servicio t_cnico y mano de obra apficabie a su adquisici6n

SEGUNDA - ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR Con e! fin de garantizar ai cliente la recepciSn puntual de cualquier notificaci6n de seguridad sobre inspecci6n,

modificaci6n o cancelaci6n que sete pueda solicitar a SHARP bajo el Acta de seguridad de productos de consumidor de 1972 LEA CUIDADOSAMENTE LA CL,_,USULA"GARANT[A L1MtTADA"DE LA ULTIMA P,&GINA

ADVERTENC A "PARAREDUC,RELR,ESGODE,.CE.D,OODESCARGA

" ELI_CTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD,

El relampago con cabeza de flecha dentro de un trib.ngutotrata

de indicar al usuario que las partes dentro del producto representan

riesgo de eIectrochoque para las personas

PRECAUCION : PARA REDUCIR EL RIESGO DE

DESCARGAS ELI_CTRICAS, NO RETIRE LA CUBIERTA

(NI EL PANEL POSTERIOR)

NO CONTIENE PIEZAS REPARABLES POR EL USUARIO

SOLICITE ASISTENCIA Tt_CNICA A PERSONAL DE

SERVICfO TECNICO ESPECIALIZADO

"Nota para et instalador del sistema de TV por cable: Esta nota tiene el prop6sito de llamar la atenci6n del instalador det sistema de cable acerca del Articulo 820-40 det C6digo El_ctrico Nacional, que contiene las directrices para fa puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar

conectado al sistema de puesta a tierra del edificio io m&s cerca a la entrada del cable"

ADVERTENClA - Las Normas de la FCCestablecen que cualquier cambio o modificaci6n no autorizada que se realice en este equipo y queno est6 expresamente aprobado por el fabricante podria anular la autoridad

det usuario para utilizar este equipo.

DESECHO DEL PRODUCTO

Este producto utiliza unTubo de rayos cat6dicos (TRC) que contiene soldadura de estafio y plomo E1desecho de estos matedates deber_ ser considerando regulaciones ambientales Para obtener infermaci6n sobre el desecho o el recictado, p6ngase en contacto con las autoridades locales o con

Electronics Industries Alliance: www,eiae,org

El signo de exclamaci6n dentro de un tri_.ngulo trata de indicar al usuario que las instrucciones

importantes de operaci6n y servicio se encuentran en los

documentos con el aparato

Page 54

PRECAUCI6N:

. No coloque el cable de alimentaci6n de CA debajo del televisor u otto elemento pesado, . Para impedirun incendio, no ponga nunca ningun tipo de vela o llama al descubierto encima o cerca del

televisor

o Para impedir un incendio o una descarga electrica, no exponga este aparato al goteo nialas salpicaduras

Tampoco deberan ponerse encima de los productos objetos lfenos de lfquidos come, per ejemplo, floreros

I MEDiOAS DE SEGURIDAD iMPORTANTES I

PRECAUCl6N : Lea per favor todas estas instrucciones antes de porter en funcionamiento

su televisor, y gu_rdelas para poder utilizarlas en el future.

La energia el_ctrica permite realizar muchas funciones utiles. Este aparato ha side disefiade y fabficado para

garantizar su seguridad ffsica Sin embargo, UNA UT1LIZACION INAPROPIADA PODRiA SER LA CAUSA DE

DESCARGAS ELECTRtCAS O INCENDIOS Para mantener el buen funcionamiento de este equipo y evitar problemas, siga las normas b&sicas indicadas a continuaci6n cuando Io instale, utilice o repare

1. Desenchufe el televisor del tomacorriente antes de Iimpiarto

2 No utiliee tiquidos ni aerosofes de limpieza Para limpiar el televisor utilice un paso hLimedo 3 No utilice accesorios que no !os recomiende et fabricante del televisor perque podrian causar petigros

4 No utitice el televisor cerca del agua - per ejemplo, cerca de una bafiera, lavade, fregadero o lavadora, en

un s6tano htJmedo, cerca de una piscina, etc

5 No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podria caerse

causando sefias heridas a ni_os o adultos, y, per supuesto, el aparato se estropearfa Ponga el televisor solamente sobre un carrito o soporte recomendado per el fabricante, o vendido junto con el televisor

6 La combinaci6n de carrito y televisor debe moverse con touche cuidado Las paradas

_apidas, fa fuerza excesiva y las superficies irregulares pueden set la causa de que la

combinaci6n de televisor y carrite se volteen

7 Cuando instale el televisor en una pared o en una estanter[a siga tas instrucciones del

fabdcante, y utilice el kit de montaje aprobado per el fabricante

8 Las ranuras y aberturas de la caja y det panel posterior o inferior sirven para la ventilaci6n del aparato, para

que _ste funcione bien y para evitar que se caliente Estas aberturas no deben taparse nunca Este televisor

no debe colocarse en un lugar cerrado (come un estante para tibros) si _ste no dispone de la ventilaci6n apropiada

9 Las aberturas no deben taparse nunca con un paso u otro material; y las aberturas del panel inferior no

deben taparse tampoco co]ocande el televisor sobre una cama, sofA, alfombra u otra superficie similar Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca cater

10 Este televisor s61odebe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no

est6 seguro acerca dei ripe de corfiente de su hogar, p6ngase en contacto con el concesionario de quien adquiri6 e! televisor o con Ia compa5ia el_ctrica local

En el case de equipos de televisi6n dise_ados para funcionar con baterias, consulte las ir_strucciones de

use

11 Come medida de seguridad, el equipo de televisi6n estA equipado con un enchufe polarizado de dos hilos

El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente

Si el enchufe no entra en eltomacorriente, pidale a un electricista que le cotoque un tomacorrienle nuevo No modifique el enchufe porque anular_ esta caractefistica de seguridad

12 No permita que se apoye nada sobre et cable de alimentaci6n No ponga este televisor donde et cable

pueda ser deformado per personas que caminen sobre _t

Page 55

I MEDIDAS. DE S GU ,iDAD IMPORf N']=ES (Contin ici6,n).,,!

13 Cumpla con todos los avisos y las instrucciones marcados en el televisor I4 Si se conecta una antena exterior al televisor, asegt)rese de que el sistema de antena este conectado a

tierra para obtener cierta protecci6n ante los aumentos de voltaje y la acumulaci6n de cargas estaticas, La secci6n 810 del C6digo El_ctrico Nacional ofrece informaci6n relacionada con la conexi6n a tierra

correcta del poste y la estructura de apoyo, fa conexi6n a tierra del cable de ent_ada a una unidad de descarga, el tamale de los conductores de conexi6n a tierra, ta ubicaci6n de la unidad de descarga de

antena, la conexi6n a los electrodes de conexi6n a tierra, y los requisites para el electrode de conexi6n a tierra

EJEMPLO DE CONEXION A T_ERRA DE LA ANTENA

SEGON EL CODIGO ELI_CTR_CO NACIONAL

_Z_ R Y"-";','2 i"J, UNIDAD DE OESCARGA DE ANTENA

, EQUIPODE JIlT (NEC SECCION 810"20)

_EF _NEECASt CC 'cOoNNEX ;_IN A TIERRA

='_ SISTEMA DE CONEXION ATIERRA

NEC--CODIGO ELECTRICO NACtONAL (NEC AR'I£ 250. APARTADO H}

eEL ELECTRODe DE SERVIC!O ELECTRtCO

15 Para proteger aun mas este televisor durante tormentas el_ctricas o cuando se deje sin atender y sin

utilizar durante largos periodos de tiempo, desenchufe el cable de atimentaci6n del tomacorriente y desconecte la antena. Esto evitara que el aparato pueda estropearse debido a los relb,mpagos y la

sobretensi6n en la l[nea de afimentaci6n

16 Un sistema de antena exterior no debe ubicarse cerca de Iineas de alimentaci6n etevadas, ni cerca de

luces el_ctricas o circuitos de alimentaci6n, Tampoco debe ubicarse donde pueda caer sobre tales lineas o circuitos de alimentaci6n. Cuando instale un sistema de antena exterior, tenga muchisimo cuidado para no tocar las lineas o circuitos de alimentaci6n porque e! contacto podria causar un accidente mortal

17 No sobrecargue los tomacorrientes ni los cables de extensi6n porque esto podfia causar un incendio o

descarga el_ctrica

18 No meta nunca ningtJn objeto en el interior del televisor porque podfia tocar piezas con atta tensi6n o

causar un cortocircuito con otras piezas causando un ineendio o descarga electrica No derrame nunca ningun ripe de Ifquido sobre el televisor

19 No trate de reparar et televisor usted mismo porque al abrir o quitar tas tapas podria exponerse a una

descarga de tensi6n uotros peligros Las reparaciones debe realizarlas et personal de servicio CALIFICADO

20 Desenchufe este televisor det tomacorriente y solicite el servicio de un t_cnico calificado cuando se

produzcan las condiciones siguientes:

A Cuando el cable de la alimentaci6n o el enchufe esten estropeados,

B Cuando haya derramado un tiquido sobre el televisor

C, Si et televisor ha quedado expuesto a la Iluvia o al agua,

D Si el televisor no funciona normalmente siguiende las instrucciones de utilizaci6n, Ajuste soIamente

los controtes indicados en las instrucciones de utifizaci6n Un ajuste inadecuado de otros controles

podria estropear el aparato y, entonces, serfa necesario acudir a un t_cnico CALIFlCADO para que _ste Io repare y Io devuelva a su condici6n normal

E Si el televisor se ha caido o la caja se ha estropeado F Cuando fas prestaciones del televisor cambien considerablemente sera necesario llamar al servicio

de reparaciones

2t, AI finalizar cuatquier servicio o reparaci6n de este televisor, pida al t_cnico de servicio que realice

comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningt_n problema

22 Cuando sea necesario cambiar piezas, cerciSrese de que et t#cnico de servicio utiliza las piezas de

CAMBIO especificadas per el fabricante, aquellas que tengan las mismas caracteristicas que las piezas originates Las piezas de recambio no autorizadas pueden causar incendios, descargas el_ctricas u otros peligros

Page 56

i ilReferenciar pidadeloscontroiesdeoperaci6n iii ' i:

e Nombres de los componentes

ALIMENTACtON (POWER) Puisando -+ Enciende (On) Pulsando nuevamente -e Apaga. (Off)

SENSOR DE ( REMOTE

MENU (MENU) Pulsando -e Accede al MENU PRINCIPAL.

Pulsando nuevamente ..e Sale del MENU PRINCIPAL

ALIMENTAC!ON (POWER) Puisando _ Enciende (On) Putsando nuevamente _ Apaga (Off)

TECLADO A OISTANClA (REMOTE KEYPAD) Para tenet acceso a cualquier

canat empleando tas tectas

RETORNO AL CANAL ANTERIOR (FLASHBACK)

Para voiver at canal anterior AUMENTOIDISMINUCION DEL -- VOLUMEN (VOLUME UPIDOWN)

(+) Aumenta el sonido ( - ) Disminuye el sonido

• Cambia o selecciona los ajustes de TV en la visualizaci6n en pantalla

SILENCIAMIENTO (MUTE) \

Pulsando -+' Silencia el sonido Putsando nuevamente --., Restaura e! sonido

• Cuando se sitencia et sonido. CLOSED

CAPTION aparece si se encuentra dis- ponible

VIDEOIAUDIO IN 2

-- ERMINALES DE ENTRADA

(PeR DENTRO DE LA PUERTA) CANAL SUPERIOR/INFERIOR

(,&) Selecciona el siguiente canal

j--- superior

iV') Selecciona et siguiente canal

AUMENTOtDISMINUCION DEL VOLUMEN (VOL)

(+) Aumenta el sonido ( - ) Disminuye el sonido

Venlanilta del lransmisor de infrarrejos

ENTRADA (INPUT)

Pulsando --) Cambia al mode de entrada 1

del video externo

Pulsando 2 veces _ Cambia at mode de entrada 2 de_video extemo

Putsando 3 veces _ Vuelve a{ mode TV

original Consulte la p&gina 41

INTRODUCtR(ENTER)

Seutitiza en algunos cases en los cuaJes

una Caja de Inverso_'de Cable _equiete una orden 'enter" despu_s de seleccionar los canales, al usar el teclado a distanda

• Uti_izar para confi_raa{ ia se_ecd6n de canal CANAL SUPERIORtlNFERIOR

(CHANNEL UPtDOWN)

(-&) Selec_iona et siguiente canal superior (V) Setecciona el siguiente cana} inferior

Censu}te las p_ginas 33-34 para ebtener informacibn sobre el preajuste de canaies

PREPARACION (MENU) Pulsando -+ Accede ai MENU PRINCIPAL

Pulsando nuevamente -_ Sate del MENU PRINCIPAL

VISUALIZACION (DISPLAY) Pulsando _ Aparece el canal de

recepci6n per cuatro segundos. Pulsando nuevamente -4 Elimina la

visuatizaci0n , En e_ mode de "Closed Caption" se

muestra eI canal de recepcibn per un code Iiempo

(ESPAI OL)

inferior

Page 57

Verifique estos puntos para vet si usted mismo puede solucionar et problema

LiSTA DE

COIVIPROBACIONES

DE SERVIClO

RAPIDO

€,

0_ 03

-0

POSIBLE SOLUCION

Pruebecon otro cana!y si todoest,, bien, el problemapuede serde la

emisora. Est&conectadoel televisor?

Llegaelectric!dadat tomacorrientes? Est_ conectadoel interruptordel

televisor? Esta conectadotaantenaatterminal del

panel posteriordeItelevisor? Si utitiza una antenaexterior,cerciSrese

de que el cable noest_ da_ado Compruebesihay interferenciatocat. Desconecteel interruptorPOWERy

vuelva a conectarlodespuesde transcurrirun minuto,

Ajuste et controldeCOLOR. Ajusteel control de MATIZ Verifiquelosproductosexternosde

Video/Audio,revisesi hayfugas de conexionessueltas e rotas.

Compruebeel estadode laspilasdel mandoa distancia

DesliceCATViDVD-TViVCRselector para situarlosobretaposiciSnTV

Est&nbienconectadosloscables de sonido?Compruebeel nivel del votumen

Est,. conectadoel altavoz? Desactive(OFF)el modoCLOSED

CAPTION/ Desactive (OFF)elrnodo Ahorrode Energ[a(Energy Save)

Desenchufeet televisory vuelvaa enchufartodespu_sdedos minutosom_s

-- !

_ Z

X X

L_ _

o Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, ta

pantalla puede ponerse en blanco y negro Si ocurriera esto, ponga el modo CLOSED CAPTION en OFF

(lmagen oscura yen bianco)

Para la Iocalizaci6n del Servicio T_cnico Autorizado de Sharp m&s pr6ximo o para conseguir material de informaci6n, repuestos o asistencia t_cnica, I!ame a 1-800-BE-SHARR

Page 58

(FRANCAIS)

Lisez attentivement ces inst[uctions et gardez-les & pro×imit6 pour toute r_f_rence ukerieure IMPORTANT

Afin de vous aider en cas de porte ou de vol, inscdvez tes

num_ros de s6rie et de modele du t_l_viseur dans les espaces fournie & cet effet. Ces numeros sont situ_s

rarri_re du t_l_viseur.

N° du module :

N° de s_rie :

iNFORMATi0NS!MPORTANtES

Deux raisons importantes d'enregistrer rapidement la garantie de votre nouveau t_l_viseur SHARP & !'aide de la carte d'enregistrement (REGISTRATION CARD) incluse darts Ie cofis :

LA PREMIERE -- LA GARANTIE Gr&ce & elle, vous obtiendrez imm_diatement les avantages client concernant fa garantie des pi_ces, du

service et des travaux applicable _.votre achat, LA DEUXIEME - LA LOI SUR LA SECURITE DU PRODUI'[ DE CONSOMMATION (CONSUMER

PRODUCT SAFETY ACT) Gr&ce_ etle, vous recevrez rapidement un avis de securite lors du contrSle,de ta modification ou du rappel de votre

produitque SHARP peut_treamen_&foumir conform_ment &la Ioide 1972surtasecurit_ du produitde consommation LfSEZ ATTENTIVEMENT LE PARAGRAPHE,_GARANTIEL[M_TEE_,DELA DERN_EREPAGE

]

AVERTISSEMENT: POUR REDUIRE LE RISQUE D'INCENDIE OU D'EI.,ECTROCUTION,

ATTENTION : POUR REDUIRELE RISQUE

D'ELECTROCUTtON,

NE RETtREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE),

L'APPAREIL NE CONTENT AUCUNE PIECE A ENTRETENIR

PAR L'UT_LISATEUR

CONSULTEZUN PERSONNEL QUALIFIE POUR

LA MAINTENANCE

"Note & rintention de I'instailateur du systeme CATV :Ce rappet est fourni afin d'attirer rattention de l'instaltateur de systeme CATV sur Particle 820-40 du National Electrical Code qui indique les r#gles de mise & la terre

appropri_e et, en particufier, sp_cifie que la tigne de terre dolt _tre connect_e au r_seau commun de mise & la terre du b&timent, au point le plus proche possible de la source!'

AVERTISSEMENT - Les reglementations FCC 6tablissent que des changements ou des modifications non autoris_s sur cet _quipement et non approuv_s express6ment parte fabricant peuvent annuler tout pouvoir de f'utilisateur sur ]e fonctionnement de cet equipement,

N'EXPOSEZ PAS CET EQUlPEMENT A DES ENDROITSTRES HUMIDESo

Le symbole de fa foudre sous forme de fleche dans un triangle

est suppos6 indiquer & l'utilisateur que les pieces

internes au produit constituent un risque d'_lectrocution,

Lesymboledu point d'excfamation

dans un triangle est suppos_ indiquer & I'utilisateur que des

instructionsde fonctionnement et

de maintenance importantes se trouvent dans la documentation

fournie avec l'_quipement,

MISE AU REBUT OU PRODUIT

Ce produ[t utiiiseun tube & rayonscathodiques (TRC) contenant duptomb & braseret du brasage tendre. La mise au rebut de ces mati_res peut _tre r_glement_e pour des raisons environnementales Pour toute

informationsur la raiseau rebutou terecyclage,contactezlesautorit_slocalesou lesprecautionsimportantes pr_cenis_es par ta societ_ Electronics IndustriesA{liancesur: wv_.eiae.org.

Page 59

[:.m.rORMAT.O.S".MPO.TES'............".................."°"oi

....,;:,, ,,,:,i,_,_,i:.i ,: ,........;; L ,,,,.,,,.,,,,:,:.i, :,,,

ATTENTION:

o Ne placez paste cordon d'aimentation sous le t61_viseur ou sous tout autre objet Iourd

• Ne placez pas de bougies ni deflammes nues sur let_l_viseur ou &sa proximit6, afin d'6viter tes incendies

o Vettez & ne pas _clabousser ni faire tomber de l'eau sur ces apparels afin d'6viter les incendies ou les

_fectrocutions. Ne placez jamais d'objets remptis de liquide, comme des vases, sur ces apparels

i"",P=,icAIT .s ,,,,N=Po.=TA.T=S,,: i

ATTENTION ."Veuillez Ire toutes ces instructions avant d'utiliser votre tel6vision et conservez-

les pour un usage ult6rieur,

L_nergie electrique peut ex_cuter de nombreuses fonctions utiles. Cet apparel a et_ con_u et fabrique de fa_on

& garantir votre enti_re s_curit6 CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRA1NER DES

RtSQUES D'ELECTROCUTION OU D'iNCENDIE Afin de ne pas d6truire }es protectionsint6g[6es_tcet apparel, respectez les r_gles de base suivantes pour son instalation, son uttisation et sa maintenance

I D6branchez la t61evision avant de la nettoyer 2 N'uttisez pas de nettoyants liquides ou d'a6rosols et utiisez un chiffon humide. 3 N'utlisez pas d'accessoires d6conseill6s par le fabdcant de mat6riel video, car ils impliquent des risques 4 N'utilisez pas cette tel6vision & proximit_ d'eau -- par exemple, pros d'une baignoire, d'un lavabo, d'un

6vier ou d'un bac & laver, dans une cave humide ou pros d'une piscine, etc

5 Ne placez pas cet equipement sur un chariot, un support ou une table instabie. La t61evision peut tomber

et provoquer de graves lesions a route personne et causer de s_rieux dommages &I'_quipement Utlisez uniquement un support ou un chariot recommand# par le fabricant ou vendu avec la

t616vision

6 1Jensembte television-chariot dolt etre d_plac6 delicatement Les arr6ts brusques, une

force excessive et des surfaces in,gales peuvent renverser Fensemble.

7 Uinstalation au tour ou sur une tablette dolt 8tre reats6e conformement aux instructions

du fabricant et & I'aide d'un kit de montage approuv6 par ce dernier

8 Les fentes et lesouvertures du ch&ssis& l'arriere ou dans la parle inferieure sont prevus pour la ventilation

Pour garanlr un fonctionnement liable de lat61evisionetpour la prot6ger de route surchauffe, ces ouvertures ne doivent 6tre ni obtur_es, ni recouvertes La t616vision ne dolt pas 6tre plac6e darts un endroit encastr6 tel qu'une bibfoth#que, sauf si une ventlation ad6quate est pr6vue

9 Les ouvertures ne doivent jamais 6tre recouvertes par un chiffon ou autre et celles de ta parle inf_rieure

ne doivent jamais 6tre obtur6es si vous placez la t616vision sur un Iit, un sofa, un tapis ou toute surface similaire Cette t61evision ne doit 6tre plac6e ni & proximit6 d'un radiateur ou d'un registre de chaleur, ni

dessus

t0. Cette t616visiondoit etre afment6e uniquement par le type d'almentalon 61ectrique indiqu6 sur t'6tiquette

Si vous n'_tes pas sQrdu type d'alimentafion de votre domicile, consultez votre revendeur de t_tevision ou la compagnie d'electricit_ locale (EDF en France)

Pour la t616vision congue pour fonctionner sur batterie, reportez-vous au mode d'emploi

11 Du point de vue de la securitY, la tet6vision est equip6e d'une fiche potads6e & 2 ills (une lame plus

importante que I'autre) La fiche polaris6e & 2 fts ne p6n_tre dans la prise 61ectrique que darts un seul sens

Si la fiche ne correspond pas & la prise, demandez & votre _lectricien de remplacer la prise, ele doit 8tre obsol6te Ne modifiez pas la fiche et ne d6sactivez pas cette fonction de securit6

12.

Ne posez den sur le cordon d'alimentation Ne placez pas la t_16vision dans un emplacement ou le cordon d'alimentation est susceptible d'etre endommag4, par le passage rep6te de personnes

Page 60

.........." _: • ......! __i_L "

HPRECAuTuo.s"i P0RTA S<s .;;R

13. Respectez tousles avertissements et instructions mentionn_s sur ta tel6vision.

14. Si une antenne ext_rieure est raccord@e& la t_l_vision, veillez &ce que le syst_me d'antenne soit reli_ & la terre de fagon &fournir une protection vis-&-vis des pouss_es de tension etdes charges _lectrostatiques

accumut_es La section 810 du National Electrical Code fournit des informations relatives & une raise &la

terre correcte de la potence et de la structure portante, & une mise &la terre du fil d'entr6e & une unit_ de

d_charge d'antenne, aux dimensions des conducteurs de terre, a I'emplacement de l'unit_ de d@charge d'antenne, au raccordement des prises de terre ainsi qu'a leurs exigences

EXEMPLE DE MiSE/_ LA TERRE D'UNE ANTENNE

SELON LE CODE NATIONAL DE UELECTRICITE_

--_./ DESCENTE

____" D'ANTENNE

_/COLLtER DE MISE//z_"X-X,,.

_------__ )"_'1 j_ UNITE DE De:CHARGE

I......... _"_1 / Z _""'_I D'ANTENNE

l 1 /_7--_I 'NEc'ECT'°N''°2°>

L._ ........ E-.-,.,-._r _ _] / _, CONDUCTEURS DE TERRE

-'-,.-.. _._'_"_"-.._ l u__ (NEC SECTION 8t0-21) _ COLLIERS DE MISE ,&,LA TERRE

_ [_LECTRODE DETERRE DE

NEC-CODE NATIONAL DE _t_LECTRICITE (NEC ART 250, PARTIE H)

LA COMPAGNIE D'I_LECTRICITI_

Pour tout ajout de protection b.votre tel@visionen cas de foudre ou Iorsque elle reste en vei!le et inutilis@e pendant de !ongues p@riodes,d@branchez-laet deconnectez l'antenne, Vous @viterezainsi des dommages

& votre @quipementsuite b.la foudre et des pouss@esde tension.

Un syst@med'antenne exterieure ne dolt pas @tresitu_ & proximit@ de lignes a_riennes ou d'autres groupes 61ectrogenes ou circuits electriques ou dans des emplacements ou l'antenne pourrait tomber sur ce type de tignes ou circuits Lors de l'instaltation d'un systeme d'antenne ext@rieure,faites extr@mement attention a.ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous @trefatal

I7.

Ne surchargez pas les prises et les prolongateurs de ligne afin d'@viter tout risque d'incendie ou d'_lectrocution

N'introduisez jamais d'objets b.travers les fentes du chissis, car ils pourraient entrer en contact avec des points de tension dangereux ou des pi#ces court-circuit_es et provoquer ainsi un incendie ou une

61ectrocution Ne r_pandez jamais de liquides sur tat_l_vision.

N'essayez pas de r_parer vous-m_me votre t_l#vision L:ouverture ou le retrait des capots peut vous exposer & une tension dangereuse ou & d'autres risques Confiez toutes les operations de maintenance a,un personnel qualifi_.

Lorsque vous _tes confront_ aux situations suivantes, d_branchez ta t_l_vision et confiez routes les

operations de maintenance & un personnel qualifie :

A lorsque le cordon d'alimentation ou la fiche est endommag_ ou efflloch_ ;

B si du liquide a 6t_ r_pandu sur/dans Ia t_l@vision;

C si tat_l_vision a _t_ expos_e & ta pluie ou & I'eau ;

D si la t_!_vision ne fonctionne pas normalement m_me en respeclant le mode d'emploi. R_glez

uniquement les commandes abord#es par le mode d'emploi.. Des r6glages inappropri#s d'autres

commandes peuvent occasionner des dommages et n@cessiteront ensuite, dans la plupart des cas,

une intervention plus importante d'un technicien qualifi_ pour que ta t_levision fonctionne normalement ;

E si la t_!_vision a 6t6 renvers#e ou que le chb.ssis est endommag6 ; F. Iorsque la t61_vision pr6sente une alteration visible des performances i cela indique un besoin de

maintenance

21 Pour toute maintenance ou r_paration de la television, demandez au technicien de r@aliserdes contr61es

de s_curit_ classiques afin de d_terminer si ta t@l_visionest en bon etat de marche_

22 Lorsqu'un remplacement de pi_ces se revile n_cessaire, veillez &ce que le technicien utilise des pi_ces

de rechange sp_cifi_es par le fabricant et qu'elles aient les m6mes caract_ristiques que la piece d'origineo Des remplacements nonautoris_s peuvent occasionner unincendie, une _lectrocution ou d'autres risques

Page 61

t . ii on os;i..}:: ' t

ALIMENTATION (POWER) Appuyer _ Pour mettre sous tension

Appuyer de nouveau -_ Pour metlre hers tension

CAPTEUR DE -- Tt_LECOMMANDE [

RI'I'EGLAGE (MENU) Appuyer -e Pour mettre sous tension

Appuyer de nouveau -+"Pour mettre hers tension

ALIMENTATION (POWER)

Appuyer --e Pour mettre seus tension Appuyer de nouveau -> Pour mettre

hers tension

PAVE NUMERIQUE DE COMMANDE'_

A DISTANCE (REMOTE KEYPAD) \ Selectionne directement te canal voulu \ sur ie pave num@ique

Rappelle te canal regarde precedent

RETOUR (FLASHBACK) AUG MENTATION/REDUCTION VOLUME SONORE (VOLUME UP/

DOWN) (-1-.)Pour augmenter ]e votume du son (-) Pour diminuer le volume du sen

• Modifie eu s_tectienne les

ecran reglages TV sur I'affichage sur \ tJ _u'rF ni_,lAxI: t,_E,u ,1

SOURDINE (MUTE) MUTE D_S_,LAY : Appuyer --> lVlise en sourdine du son ._ t

Appuyer de nouveau --_ Retablissement du

son

• Lorsque le son est coupe, SOUS-TITRE

apparaft siia fonction est disponibie

AUG M ENTATION/RI_DUCTtON

DU VOLUME SONORE (VOL) (+) Pour augmenter le volume du son

(-) Pour diminuer le volume du son

VIDt_O/AUDIO

[--PRISES D'ENTRI_E

(DERRIERE LE VOLET)

Canal HAUT/BAS

(A) S_lectionne le canal superieur

(_) S_tectionne le canal inf_rieur

suivant prec,.dent

Fen6tre demission du signal infrarouge

ENTREE (INPUT) Appuyer .-> Pour s6lectienner le mode

ENTRI_E t video externe

Appuyer 2 lois _ Pour s6lectionner le mode

ENTRI_E 2 video externe

Appuyer 3 lois _ Pour revenir au mode TV

ENTRI_E 3 video externe ou ]e mode COM- initial (Voir page 40)

ENTRER(ENTER) Paffois utilis_e torsqu'un convertisseur

necessite I'introduction d'une commande "enter" apr_s la selection de canaux

[aide du pave num6rique de commande

distance.

• Conlirmaient ie chei× de canal TOUCHES DES CANAUX CROISSANT!

Dt_CROISSANT (CHANNEL UPIDOWN) (A) Selectionne le canal supedeur suivant

(_7) S61eclionne le canal inf@deur pr@cedent

• Voir page 33-34 pour prcrOgler les canaux

RI_GLAGE (MENU) Appuyer -.> Acces au MENU PRINCIPAL Appuyer de nouveau _ Sortie du MENU

PRINCIPAL

AFFICHAGE (DISPLAY) Appuyer -+ Pour afficher le canal requ pendant qualre secondes

Appuyer de nouveau -> Pour faire disparaftre le canal

• Pour afficher temporairement le canal regu en mode Sous-titres

Page 62

V6rifierlespointssuivantsafin ded_terminer

L|STE DES

VERIFICATIONS

POUR UN ,,.,,'=

DEPANNAGE

RAPIDE _

SOLUTIONPOSSIBLE

s'ilest possiblederem_dierau

_ E

probl_meparun simpler0glagedescommandes

_ L:_

"E: o _ o

EssayerunnouveaucanalS'illonclionne,il s'agil probablementd'unepannedelachaine

Let_i6viseurest-ilbranch6?

Laprisesecteurtonctionne-t-elle? L'interropieurPOWERdut61_viseurest-ilsous

tension? L'antenneest-dleracco[d_eauxhomes_,I'ard_re

de!'appareiI?

Sirantenneext_rieureestutiiis_e,s'assurerqu'il

n'yapasdefitssedinnn_s V6rifiers'iln'yapasd'inled_rencelocaleoudebruit

_lectriqueext6fieur

MdtreI'interrupteDrPOWERherstensionpuisde

nouveausoustensionauboutd'uneminule R6gierlacommandodeCOULEUR

R_glerlacommandodeCONTRASTE Vdrifie_I'appareilvid6o/audioe×teme: s'assurer

queIese_bles[1_connexionnesentpasdessert,s

oucass6s

V_rifierlospi_esdelat_l_commande

Faitesglisserles_tecteu[demodeCATVIDVD-HI VCRsur]apositionTV

Lose,_biesaudiosonNIsfermementconnecl_s?

V_dfierlenNeauduvolume Loshaut-parleursfonetionnenNle?

Mettrelemodesous4ilragehersservice"ARRET"

Moded'_oonomied%mgiesup"ARRI)T", D0brancherlel_idviseuret(erebreneherapr_sdeux

minutes

X X

X XIX

.............X X I

- I

IXIX

[ Remarque: _>

o En mode TEXTE, s'il n'y a pas d'6mission TEXTE & recevoir, r_cran

du t_l_viseur pourrait _tre sombre et vide Dans ce cas, placer ie mode Sous-titrage hors service.

(image sombre et vide)

Pour connaitre l'empiacement du centre de service apr6s-vente agr66 Sharp ie ptus proche ou pour obtenir de la documentation sur ies produits, des accessoires, des consommables ou une aide au

consommateur, appelez le 1-80&BE-SHARP.

Page 63

............................iLimited Warranty .......... _"J'_'_"' ' ' ' ' _ _ _ _ rl

CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp

brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser

for parts or labor for the period(s) set forth below This warranty does not apply to any appearance items of the Product nor to the additional excluded

item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has

been altered or modified in design or construction

tnorder to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law, ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERiOD(S) FROM THE DATE

OF PURCHASE SET FORTH BELOW Some states do not allow limitations on how long an implied warranty lasts, so the above limitationmay not apply to you

Neither the sales personnel of the seller nor any other person is authorized to make any warranties

other than those described herein, or to extend the duration of any warranties beyond the time period

described herein on behalf of Sharp

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall

be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and

for the period of time described herein, shall constitute complete fulfillment of all liabilities and

responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise, tn no event shall Sharp

be liable or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage.

Some states do not allow the exclusion of incidental or consequential damages, so thatabove exclusion may not apply to you

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE

Model Specific Section

Your Product Model Number & Descri_ion:

Warrant_ {_r this Product:

Additional Item(s) Excluded from Warranty Coverage (if any):

Where to Obtain Service:

What to Do to Obtain _vice:

TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www sharpusa corn

27SF56B, 27 inch Color Television (Be sure to havethis information available when you

need service for your Product.) One (1) year parts and labor. The warranty period

continues for an additional one (1) year, for a total of two (2) years, with respect to the picture tube(s) in the Product for parts only Labor and service are

not provided free of charge for this additional period Non-rechargeable batteries.

From a Sharp Authorized Servicer located in the United States. To find the location of the nearest

Sharp Authorized Servicer, call Sharp toll free at 1- 800-BE-SHARP.

Contact your Sharp Authorized Servicer to obtain in-home service for this Product The Servicer wiil

come to your home and if it is necessary to remove the Product, the Servicer will reinstall it Be sure to have Proof of Purchase available.

Page 64

SHAIP ILICTRONICS COIIIPOI_WI@H

Sharp Plaza, Mahwah, New Jersey 07430-2135

Printed in Mexico

T1NS-C46 !WJZZ 05P12-MMP

Sharp 27SF56B Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual