Seville Classics WEB480 User Manual

Customer Service Informaon

Telephone: [phone]

Fax: [phone]

Hours: 8:30 AM – 4:30 PM (PST)

Email: [e-mail]

Homepage: www.SevilleClassics.com

11-2017

Stacking (oponal)

STEP 5.

Install CORNER CLIPS (G) to

top corners of RAILS (D) and

TOP FRAMES (E).

Snap on FRAME CLIP (H) to hold

RAILS (D) and TOP FRAME (E)

together.

Assemble TOP secon of second

unit and t FEET (K) to boom of

base for a bonus non-slip folder

organizer.

Fit STACKING PINS (J) into top poles of SIDE FRAME (A) on the

boom unit.

Assemble second unit without BASE (A).

Fit the legs of the second unit over the STACKING PINS (J) and

press down.

Model #: WEB480

Thank you for choosing Seville Classics! We hope that you enjoy
your new desk organizer. Please read through this user guide for
parts list, assembly instrucons, frequently asked quesons and
further contact informaon.

11-2017

3-Tier Stackable Desktop
Leer File Tray Organizer

Parts List

Please make sure you have all the parts on this list.

If you’re missing parts, contact us for replacements at [phone] or

send an email to [e-mail]

A. Base

B. Side Frames (2)

C. Trays (3)

D. Rails (2)

E. Top Frame

F. Dividers (3)

1

Assembly Instrucons

STEP 1.

Clip FOOT PADS (I) to BASE (A).

G. Corner Clips (2)

H. Frame Clips (2)

I. Foot Pads (4)

J. Stacking Pins (4)

K. Feet (4)

2

STEP 2.

Slide SIDE FRAMES (B) over upright

poles on BASE (A).

IMPORTANT: Make sure guides

on side frames face inward.

Fit the small balls on TRAY (C)

through the holes on both SIDE

FRAMES (B) and fully push the

tray in.

TIP: Lightly pull the side frames

apart to more easily t the trays

into the guides.

Start with boom tray.

Repeat for other two trays.

STEP 3.

Insert RAILS (D) to back and front

of SIDE FRAMES (B).

STEP 4.

Insert poles of TOP FRAME (E) into

holes on RAILS (D).

Clip DIVIDERS (F) to the TOP

FRAME (E).

Install tallest DIVIDERS (F) in back

and shortest DIVIDERS (F) in front.