Seville Classics Ultradurable SHE18240ZB, Ultradurable WEB570, Ultradurable WEB607 Quick Start Manual

Customer Service Informaon

Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com

Cauon

Place heavier items on the lower shelves and lighter ones on the top.
Do not stand or climb on the shelving system.
Do not drop heavy items on the system.
Do not move the system while loaded.

Specicaons

Weight capacity Per shelf Overall

On leveling feet

On wheels

SHE19524ZB

UltraDurable Shelf

24" x 18"

WEB106

8-Pack Shelf Label

Addional parts and accessories are available for purchase online at:

www.SevilleClassics.com

WEB232

S-Hook (6-pack)

View assembly online here:
hps://www.youtube.com/watch?v=N6iRVVqBG-I

Thank you for choosing Seville Classics! We hope that you enjoy your
commercial-grade steel wire shelving! Please read through this guide for
parts list, assembly instrucons, frequently asked quesons and further
contact informaon.

SHE16228B

Sliding Cabinet
Organizer Drawer

Commercial-Grade 5-Tier

NSF Steel Wire Shelving with Wheels

24" W x 18" D x 72" H

Dimensions: 24" W x 18" D x 72" H (75" H on wheels), 1" Pole Diameter

800 lbs. (362.8 kg) 4000 lbs. (1814 kg)

100 lbs. (45.3 kg) 500 lbs. (226.8 kg)

022019

Model #: SHE18240ZB, WEB570, WEB607

022019

Parts List

B. Top poles (4)

(Plasc cap on end)

Please make sure you have all the parts on this list.

If you’re missing parts, contact us for replacements at

[phone] or send an email to [e-mail]

1

D. Shelves (5)

F. Leveling feet (4)

G. Wheels (2)

H. Locking wheels (2)

or

Assembly Instrucons

STEP 1.

Screw LEVELING FEET (F) or WHEELS
(G, H) into base of boom poles.

Repeat for all boom poles.

STEP 2.

Snap SLIP SLEEVES (E) around the
grooves on BOTTOM POLES (A) for
your lowest shelf.

TIP! Count the number of grooves
from the boom of the pole to keep

the height consistent.

A. Boom poles (4)

(Threaded end)

C. Connectors (4)

(May be aached to poles)

2

STEP 3.

Fit SHELF (D) over the top of the 4 poles
and over SLIP SLEEVES (E).

Repeat STEPS 2-3 for next shelf.

TIP! If necessary, lightly tap shelves into

place with a rubber mallet.

STEP 4.

Screw CONNECTORS (C) into top of

BOTTOM POLES (A).

Screw TOP POLES (B) to CONNECTORS (C).

TIP! Connectors may be pre-installed.

STEP 5.

Repeat STEPS 2-3 for remaining shelves.

Congratulaons!

Enjoy your now complete
shelving unit.

E. Slip sleeves (20)