Seville Classics SHE16218B, SHE16218KB, SHE16218WB Assembly Instructions Manual

STEP 4. Insert Drawers

Slide the DRAWERS (D) into the channels and

clip the SHELF (C) onto the crossbars.

Congratulaons!

Enjoy your new organizer cart!

FAQs

Q. How big is it?

A. Unit measures 12.8" W x 15.35" D x 38.19" H

Q. Can I use it without the casters?

A. No, the cart is not designed to be used without the casters.

Q. How much weight can it hold?

A. Weight capacity per drawer: 3.3 lbs. (1.5 kgs)

Weight capacity on top shelf: 16.5 lbs. (7.5 kgs)

Total weight capacity: 49.5 lbs. (22.5 kgs)

10-Drawer Organizer Cart

Customer Service Informaon

Telephone: [phone]

Fax: [phone]

Hours: 8:30 AM – 4:30 PM (PST)

Email: [e-mail]

Homepage: www.SevilleClassics.com

12-2017

Model #: SHE16218B/KB/WB

Thank you for choosing Seville Classics! We hope that you enjoy your
organizer cart. Please read through this user guide for parts list,
assembly instrucons, frequently asked quesons and contact info.

12-2017

Parts List

Assembly Instrucons

A. Side frame (2)

B. Crossbar (4)

C. Shelf (1)

D. Drawer (10)

E. Sleeve (4)

F. Caster (2)

G. Locking caster (2)

H. Bolt (8)

I. Washer (8)

STEP 1. Aach Casters

Make sure channels on each

SIDE FRAME (A) face each other.

Push the SLEEVES (E) into the

boom poles of SIDE FRAME (A).

Push CASTERS (F) and LOCKING

CASTERS (G) into the SLEEVES (E).

Repeat for other SIDE FRAME (A).

STEP 2. Aach Crossbars

Fit a WASHER (I) between SIDE

FRAME (A) and CROSSBAR (B).

Flat side of washer MUST sit in end

crossbar. Curved side of washer

MUST t against side frame.

J. Screw (10)

K. Drawer Pull Knob (10)

L. Allen Wrench

Please make sure you have all the parts on this list.

If you’re missing parts, contact us for replacements at

[phone] or send an email to [e-mail]

Screw BOLT (H) through outer bolt

holes on a SIDE FRAME (A) and

into CROSSBAR (B).

Tighten bolts with Allen Wrench

(L) unl snug.

Repeat for remaining bolt holes.

STEP 3. Assemble Drawers

Aach DRAWER PULL KNOBS (K) to

all DRAWERS (D) with SCREWS (J)

and screwdriver.