Seville Classics OFFK65819 User Manual

AIRLIFT® S3 Electric Height-Adjustable Standing Desk

Models: OFF65803, 15, 74

Base + Top Kits: OFFK65818, 19, 22, 23, 26, 27, 75, 76, 77

OFFK66001, 2, 3, 4, 5, 6

Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand
desk. Please read through this user guide for parts list, instructions, frequently asked
questions and contact information.

022019

Welcome!

We at Seville Classics® are thrilled that you’ve chosen to go
AIRLIFT®! Our desks are some of the easiest to use, most versatile
and sophisticated electronic desks on the market. With this, you
can stay active throughout the day without sacricing productivity.

Choosing a height-adjustable desk is not just a convenient
upgrade—it’s a healthy one! Too much sedentary behavior can
present a real health risk, even for people who are already
healthy. Simply getting up throughout the day and moving is a
great way to ght the consequences of too much sitting. AIRLIFT®
is here to help.

Please read through this manual for more information regarding
your AIRLIFT® S3 Electric Height-Adjustable Standing Desk.

Thank you for choosing Seville Classics®! We hope you will enjoy
this desk for many years to come.

2

Table of Contents

SAFETY INSTRUCTIONS………………………………………………………………

COMPONENT DIAGRAM…………………………………………………………….

PARTS LIST………………………………………………………………………………...

TOOLS & HARDWARE LIST………………………………………………………...

ASSEMBLY INSTRUCTIONS………………………………………………………...

Prepare Workspace…………………………………………………………...

Unpack & Unfold………………………………………………………………..

Install Support Brackets……………………………………………………..

Unlock Beam……………………………………………………………………...

Align Frame………………………………………………………………………..

Mounting Seville Classics® Ergo Table Top………………………...

5

6

7

7

8

8

9

10

11

12

13

Mounting Non-Seville Classics® Top…………………………………..

Installing Feet…………………………………………………………………….

Cable Management…………………………………………………………...

Connect Cables…………………………………………………………………..

Turn Desk Over………………………………………………………………….

INITIALIZATION & USE INSTRUCTIONS……………………………………...

CABLE MANAGEMENT……………………………………………………………….

TROUBLESHOOTING………………………………………………………………….

WARRANTY INFORMATION………………………….…………………………….

MORE FROM SEVILLE CLASSICS®……………….……………………………...

SPECIFICATIONS………………………………………………………………………..

14

15

16

17

18

19

20

21

22

23

24

CUSTOMER SERVICE INFORMATION………………………………………….

3

24

4

Safety Instructions

FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND

OPERATING INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS

PRODUCT MAY RESULT IN SERIOUS BODILY INJURY

 Read and understand this manual before attempting to install or
 Assure that everyone who uses this product is informed of the contents of this manual. This

is the responsibility of the Purchaser.

 Not intended for use by young children or for those persons who require supervision.
 Do not open any of the components – legs, control box, or controller. There is a risk of

electric shock.

 Assemble desk on a at and level surface.

Use & Liability

Safe use of this product is possible only when the operating instructions are read completely
and the instructions contained are strictly observed. Persons who do not have the necessary
experience or knowledge of this product must not use the product. Persons with reduced
physical or mental abilities should not use this product, unless they are under supervision or
they have been thoroughly instructed in the use of the apparatus by a person who is
responsible for the safety of these persons. Children should be closely supervised to ensure that
they do not play with this product.

Before You Begin

Layout all components and hardware. Visually examine and make sure components are free of
damage. If there is visual damage to any component, it must not be installed.

Two people are needed to turn or move the desk and some of it’s components. When moving or
turning the assembled desk, grab the legs, not the desk top.

Make sure to assemble on a soft and non-abrasive surface to avoid scratches.

Check all connections and cables. Make sure control box is connected to a power outlet.

If the control box makes unusual noises or emits an odor, switch power o immediately.

The desk MUST be INITIALIZED before rst use.

Read the INITIALIZATION chapter prior to operation.

5

Component Diagram

Control Box Support Bracket

Support

Bracket

Top

Controller

Legs

Legs

Foot

Support Beam

Foot

6

Parts List

A. Top

B. Support Beam (1)

C. Legs (2)

(pre-installed)

D. Support Bracket (2)

Tools & Hardware List

H. Allen wrench - 3mm

I. Allen wrench - 5mm

E. Foot (2)

F. Control Box (1)

(pre-installed)

G. Controller (1)

O. Screw (10)

J. Allen wrench - 6mm

K. M8x25 Bolt (4)

L. M6x16 Bolt (6)

M. M6x40 Bolt (8)

N. M6x6 Bolt (8)

(pre-installed)

P. Bolt Sleeve (4)

Q. Washer (12)

R. Fastener (6)

S. Zip Ties (8)

T. Screwdriver

Please make sure you have all the parts on this list.

Extra washers are included and some may remain unused after assembly.

If you’re missing parts, contact us for replacements at [phone] or send an email

to [e-mail]

7

Assembly Instructions: Prepare Workspace

Lay down a blanket and place your Seville Classics® Ergo Table Top (or your
own top) with the bottom side facing up on a soft, at, even surface
beneath the top to protect the surface.

Layout all components and hardware. Examine each and make sure
components are without damage.

Support Beam Legs (x2) (pre-installed) Feet (x2)

Support Bracket (x2)

Control Box (pre-installed) Controller

Examine the location where you'll be

using the desk. Make sure there is a
grounded outlet or power strip nearby.

Assemble frame with CONTROL BOX (F)
on the side of the nearest outlet.

8

110-120V