Senco DuraSpin DS200-14v Specifications
DuraSpin™Cordless Screw Driver
Application:
Drive/Head:
Thread:
Point:
Finish:
Screw:
Drywall
to Wood
Drywall to
Light Gauge Steel
Drywall to
Heavy Gauge Steel
Wood
to Wood
#2 Phillips #2 Phillips #2 Phillips #2 Square
Bugle Bugle Bugle Flat
Coarse Fine Fine
Coarse 2/3
with Wax
Sharp Sharp Drill Sharp
Grey
Phosphate
Grey
Phosphate
Clear
Zinc
Yellow
Zinc
#6 X 1
1
/4" #6 X 11/4"
#8 X 1
3
/4"
#8 X 1
1
/2"
#6 X 1
1
/4"
#6 X 1
5
/8"
#7 X 2"
NEW!
DuraSpin, the collated screw fastening system from SENCO®,
is designed to maximize efficiency in a wide variety of screwfastening applications. Engineered for comfort and convenience,
the DS200-14v cordless screw driver drives 1" to 2" screws.
Model DS200-14v
Applications:
For drywallers and remodelers, DuraSpin is the ideal tool for drywall
(to wood or steel studs), floor sheathing, and underlayment.
Features and Benefits:
• 14.4 volt battery provides the optimum balance of power,
weight and run-time across the full range of screws
• 2,300 RPM high-torque motor drives screws without
bogging down
• Patented clutch design means long-lasting durability
• One-hour charger and extra battery ensures a backup battery
with a full charge
• Easy depth-of-drive adjustment regulates the precise
amount of countersink
• Easy bit change — from phillips to square
• Wide range of collated screws to speed production
• Belt hook — DuraSpin goes where you go
• One full year warranty
Tool Specifications:
Voltage: 14.4 volts
Battery Ampacity: 1700 mAh
RPM: 2300 rev/min
Weight: 4.9 lbs. (2.2 kg)
Height: 10 inches (254 mm)
Length: 13.8 inches (350 mm)
Width: 2.8 inches (70 mm)
Recharge Time: 1 hour
Screw Drives/Charge: see chart on reverse side
Fastener Capacity: 50 screws (one strip)
Torque Delivered: 37 in-lbs
Generated Noise: 74 dBA
Vibration: less than 2.5m/sec
2
Fastener Specifications:
Screw Lengths: 1" (25 mm) to 2" (50 mm)
Screw Diameters: #6, #7, #8
DuraSpin™Cordless Screw Driver
Typical Applications and
Screws Used
Average Number of Screws
Driven Per Charge
Screw
Reorder Code
Drywall to Wood
Drywall to Light Gauge Steel
Drywall to Heavy Gauge Steel
Subfloor to Wood
#6 X 11/4" Screws 650
#6 X 15/8" Screws 450
#7 X 2" Screws 300
#6 X 11/4" Screws
700 (25 GAUGE)
600 (20 GAUGE)
#6 X 11/4" Screws 300 (18 GAUGE)
#6 X 15/8" Screws 350
#8 X 11/2" Screws 250
#8 X 13/4" Screws
200
06A125P
06A162P
07A200P
06B125P
06C125C
06A162P
08F150Y
08F175Y
These are representative averages. Your results may vary based on specific work conditions.
Model DS200-14v
Adjustable nose piece
With easy-to-read length markings,
adjusts to screw lengths of 1 to 2 inches
Super-tough drive bits
The longest-lasting drive
bits available
Screw guard
Guides screws while protecting
hands and clothing
Adjustable depth-of-screw drive
For flush drive or countersink
Patented clutch design
Extends motor and bit life by disengaging
when drive is completed
Second-hand grip
Helps combat worker fatigue
Comfortable grip and
cushioned trigger
Ergonomically designed for extra
comfort and better productivity
with less exertion
Quick-bit release
No chuck—bits pop out and pop in
Belt hook
Lets DuraSpin go where you go
2300 RPM high-torque motor
Specially designed to torque screws in
without bogging down
For additional information on how Senco fastening systems will save you time, reduce costs and increase quality, call your nearest
Authorized Senco Dealer or Distributor listed in the Yellow Pages under “Staples,” or call our toll-free Action Line: 1-800-543-4596.
www.senco.com
Powerful 14.4 volt battery
Provides optimum balance of power,
weight and run-time across the full
range of screws
Battery charger
Provides full charge in one
hour—increases productivity
and decreases downtime
Each tool comes complete with:
Two 14.4 volt batteries,
one-hour battery charger,
2 spare drive bits, and a
rugged carrying case.
©2000 by Senco Products, Inc. Order MK394 Litho in U.S.A.
Loading...