Senco DS200-14v User Manual

0 (0)
DuraSpin™Cordless Screw Driver
Application:
Drive/Head:
Thread:
Point:
Finish:
Screw:
Drywall
to Wood
Drywall to
Light Gauge Steel
Drywall to
Heavy Gauge Steel
Wood
to Wood
#2 Phillips #2 Phillips #2 Phillips #2 Square
Bugle Bugle Bugle Flat
Coarse Fine Fine
Coarse 2/3
with Wax
Sharp Sharp Drill Sharp
Grey
Phosphate
Grey
Phosphate
Clear
Zinc
Yellow
Zinc
#6 X 1
1
/4" #6 X 11/4"
#8 X 1
3
/4"
#8 X 1
1
/2"
#6 X 1
1
/4"
#6 X 1
5
/8"
#7 X 2"
NEW!
DuraSpin, the collated screw fastening system from SENCO®, is designed to maximize efficiency in a wide variety of screw­fastening applications. Engineered for comfort and convenience, the DS200-14v cordless screw driver drives 1" to 2" screws.
Model DS200-14v
Applications:
For drywallers and remodelers, DuraSpin is the ideal tool for drywall (to wood or steel studs), floor sheathing, and underlayment.
Features and Benefits:
• 14.4 volt battery provides the optimum balance of power, weight and run-time across the full range of screws
• 2,300 RPM high-torque motor drives screws without bogging down
• One-hour charger and extra battery ensures a backup battery with a full charge
• Easy depth-of-drive adjustment regulates the precise amount of countersink
• Easy bit change — from phillips to square
• Wide range of collated screws to speed production
• Belt hook — DuraSpin goes where you go
• One full year warranty
Tool Specifications:
Voltage: 14.4 volts Battery Ampacity: 1700 mAh RPM: 2300 rev/min Weight: 4.9 lbs. (2.2 kg) Height: 10 inches (254 mm) Length: 13.8 inches (350 mm) Width: 2.8 inches (70 mm) Recharge Time: 1 hour Screw Drives/Charge: see chart on reverse side Fastener Capacity: 50 screws (one strip) Torque Delivered: 37 in-lbs Generated Noise: 74 dBA Vibration: less than 2.5m/sec
2
Fastener Specifications:
Screw Lengths: 1" (25 mm) to 2" (50 mm) Screw Diameters: #6, #7, #8
Loading...
+ 1 hidden pages