Senco DS205-14V User Manual
Fastening Solutions
A GREAT
DRYWALL
SCREW
GUN!
™
The combination of collated screws and the high
speed DS205-14V allows users to hang 4' X12'
sheets of drywall in under one minute! The
DuraSpin DS205-14V drives 1" - 2" screws.
DuraSpin® DS205-14V
Cordless Collated Screwdriver
Applications:
Drywall to wood and drywall to steel studs.
Features and Benefits:
• Reverse switch – to back out driven screws
• Dynamic braking to conserve brush wear
• 4,000 RPM high-torque motor drives screws FAST!
• Patented clutch design is long-lasting durability
• Cordless power with two 14.4-volt slide batteries
• Drives 900-1000 1¼" drywall screws on a single charge
• Easy depth-of-drive adjustment regulates the precise
amount of countersink
• Dimpled nose piece adjusts for different screw lengths
• Belt hook – DuraSpin goes where you go
• One year warranty
• Comes complete with carrying case, bit holder and spare
bit tips, two batteries, one hour batter charger and
multi-blade utility knife.
Tool Specifications:
Item Code: 2R0001N
Voltage: 14.4
Battery Ampacity: 2000 mAh
RPM: 4000
Weight: 5.2 lbs. (2.3 kg)
Height: 10" (254 mm)
Length: 13.8" (350 mm)
Width: 2.8" (70 mm)
Recharge Time: One hour
Fastener Capacity: 50 screws (one strip)
Torque Delivered: 29 In-lbs.
www.senco.com ©2005 by Senco Products, Inc.
Fastener Specifications:
Screw Lengths: 1" (25 mm) – 2" (50 mm)
Screw Diameters: #6, #7
SENCO DuraSpin Screws:
Drywall to Wood
Length Shank Item# Quantity
*11/4" #6 06A125P 1000
*15/8" #6 06A162P 1000
2" #7 07A200P 1000
Finish: Gray Phosphate
Head: #2 Phillips Bugle
Thread: Coarse
Point: Sharp
Drywall to Light Gauge Steel
Length Shank Item# Quantity
*11/4" #6 06B125P 1000
15/8" #6 06B162P 1000
Finish: Gray Phosphate
Head: #2 Phillips Bugle
Thread: Fine
Point: Sharp
Drywall to Heavy Gauge Steel
Length Shank Item# Quantity
11/4" #6 06C125C 1000
15/8" #6 06C162C 1000
* Available in 4,000 bulk box
Finish: Clear Zinc
Head: #2 Phillips Bugle
Thread: Fine
Point: Drill
#6
11/4"
#6
11/4"
11/4"
15/8"
15/8"
#6
15/8"
#6
#7
2"
#6
#6
Fastening Solutions
Adjustable depth-of-screw drive
Flush drive or countersink
Adjustable dimpled nose piece
With easy-to-read length
markings, adjusts to screw lengths
of 1” – 2” inches
Reverse switch
To back out driven screws
DuraSpin® DS205-14V
Cordless Collated Screwdriver
™
Patented clutch design
Extends motor and bit life by
disengaging when drive is completed
Second-hand grip
Helps combat worker
fatigue
Quick-bit release and change
inexpensive drive bit tips.
No chuck, bits pop out and pop in
Belt hook
Lets DuraSpin go
where you go
4000 RPM high-torque motor
Drives drywall screws fast into wood
or steel studs
Screw guard
Guides screws while
protecting hands and
clothing
For additional information on how SENCO Power Fastening
Systems will save you time, reduce costs and increase quality,
visit your nearest Authorized SENCO Dealer, Distributor or
contact SENCO: 1-800-543-4596, www.senco.com
Screw Average Number
Length Typical Application of screws driven
(inches) per charge*
1-1/4" drywall to wood 975
1-5/8" drywall to wood 650
1-1/4" drywall to 25ga. metal 925
1-1/4" drywall to 20ga. metal 900
1-5/8" drywall to 25ga. metal 800
1-5/8" drywall to 20ga. metal 750
1-1/4" drywall to 18ga. metal 550
*Note: Actual results may vary based on specific substrates
and working conditions
Smart battery charger
Provides full charge in one hour
– increases productivity and
decreases downtime
Each tool comes complete with:
• Two 14.4-volt batteries
• One-hour battery charger
• Three #2 Phillips bit tips and
two bit holders
• Rugged carrying case
• Multi-blade utility knife
Comfortable grip Ergonomically
designed for extra comfort and
better productivity with less
exertion
Powerful 14.4-volt slide battery
Provides optimum balance of power,
weight and run-time across the full
range of screws
www.senco.com ©2005 by Senco Products
Loading...