Senco 701XP User Manual

FramePro®701XP

XtremePro™ 3½" Framing/Sheathing Nailer

The FramePro®701XP nailers are designed with the
Pro in mind. XtremePro models have improved internal and
external features for improved durability and comfort. These
compact framers are easy to handle, and easy on the arm. The
30˚ short, in-line magazine, provides excellent maneuverability
and line of sight. Drive a wide range of fasteners from 2" to 3½"

to handle virtually any job.

Tool Speci fi cations:

Item#: 2H0133N Sequential
Power: 904 in/lbs

Weight: 8.0 lbs (3.6 kg
Height: 3¼ " (336.5 mm)
Length: 14¼" (362 mm)
Nail Capacity: 56-80, depending on gauge
Reg. Operating Pressure: 70 – 120 psig
Mode of Operation: Available with either Restrictive Trigger or
Dual Action activating mechanisms.

Fastener Speci fi cations:

FramePro 701XP nailer drives 2" to 3½" smooth shank
nails (Sencote®or plain); 2" to 3" ring-shank nails; 3" screw-shank
and clipped “D” head nails. Shank diameters include .113", .120"
and .131".

Applications:

For framing, truss building, sub flooring, sheathing, decking,
wood-to-concrete block, siding, fencing, pallets and crate
assembly

Features and Benefits:

• Five-year limited warranty

• Upgraded XtremePro internal features include:
anodized sleeve for additional strength and durability;
urethane sleeve cap protects sleeve from wear; fixed

fi ring valve improves tool life and speed; and positive

stop guide body aligns nail and driver for consistent drive

• Comfort and convenience features include: overmold
grip and trigger, 360° adjustable exhaust, rafter hanger

and construction ruler

• Aggressive sawtooth safety that really digs in for toenailing

• Straight-line 30˚ magazine for better line of sight and simple
two-step loading

• Last nail lock out, prevents dry firing

©2007 Senco Products, Inc.

www.senco.com

®

Adjustable Exhaust 360°

FramePro®701XP

XtremePro™ 3½" Framing/Sheathing Nailer

Ergonomic Design –

Superb balance for use all day

5-Year Limited
Warranty –

XP Durability

EZ-Clear Mechanism –

Minimizes time freeing jammed nails

Thumb Wheel Adjustable
Depth-of-Drive –

Drives nails to a consistent
and controllable depth

Full Comfort Overmold Grip –

Reduces fatigue

In-line Magazine –

Better line of sight for
right and left handers
improves balance and
reduces fatigue

Dry Fire Lockout –

Prevents dry firing, missed operations
and signals when to reload

Rafter Hanger

Rear Two-Step Loading –

Quick and easy for right or left handers

No-Mar Pad –

Protects work surface

Construction Ruler –

For quick measurements

Overmold Trigger

Aggressive Toenail Safety –

Teeth grip studs with real bite
for precise positioning

Choose the right trigger system for your specific needs!

Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates in the

following a sequence - depress the safety element at the nose of tool against the work surface
then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the
work surface before starting the sequence again. This trigger is recommended and acceptable
for most applications.

Contact Actuation Trigger (also known as dual action, bounce or bottom fire) operates in the
following sequence- pull the trigger first and keep the trigger pulled while moving the tool
along the work surface with a bouncing motion, depressing the safety element at the nose of
the tool against the work surface where the fastener is to be driven. This trigger is
recommended for use by trained professionals only in high production or volume applications.

©2007 Senco Products, Inc.

®

®

www.senco.com

Alw ays read the Operators Manual an d Safety In struction s with all too ls to ensu re
prop er u se and safety precaution s. Fo r add itional i nformation o n trig ger systems and
ho w SENCO wil l save you ti me, reduce costs, and increase qu ali ty, call our to ll -free
Actio n Lin e: 8 00-54 3-4596 to fi nd you r nearest Autho rized Senco Dealer, Distribu tor
or visit ou r web site at: w ww.senco .co m

®