Sega SONIC SPORTS AIR HOCKEY, BG-X005SGA User Manual
BG-X005SGA
MANUAL
Forward
First, we would like to thank you for purchasing the Sonic
4-Player Air Hockey Table. The product can bea2or4player
game for the whole family to enjoy.
For your own safety, please carefully read through the instruction
that indicates precautions to be taken prior to the assembly of the
product. We hope that you can quickly be accustomed to it and
comfortably play the product.
Note before assembling
1.Ensure there is sufficient space assembling the Air Hockey Table.
2.Need at least 4 people to do the assembly, please ensure safety
when moving the components.
3.Please ensure all parts are accessible before assembling.
Tools required for assembling
Screw Driver
Scissors (Pliers)
Electronic Screw Driver
Air Hockey Access Key (game key)
*:Note Self preparation on the tools indicated above
Be careful not to damage the product when using the tools to assemble.
1.
List of Parts
Power Switch
Blower Access Door
Main Body
Overhead Bar
Key and Screws Storage Box
Legs & Leg Levelers
4Sets
Side Guards
Center Guard
SEGA
X1
X4
Plastic Bar Bracket Cover (black)
Overhead Bar
X1
Scoreboard
X1
Puck and Mallet Box
X2
Center Guard Bracket
X2
X2
Scoreboard Brackets (1 set)
Overhead Bar Bracket (2 sides)
2.
List of Parts
Plastic Sonic Sign
Mallets x8
Pucks x20
Power Cable
Spray Wax for Tabletop
X2
< 24>X
<>X16
List of Screws
Big Flathead Screw (4mm x 12mm)
Scoreboard x 12
Aluminum Side Guard Brackets
x12
Roundhead Screw (8mm x 25mm)
Legs x 16
Big Flathead Screw (5mm x 35mm)
Plastic Bar Bracket Cover(black)
x8
<>X8
Flat Washer (8mm x 16mm)
Legs x 16
<>X16
<>X19
Big Flathead Screw (5mm x 15mm)
Sonic Sign Fastener x 3
Overhead Bar Bracket x 12
Center Guard x 4
Big Flathead Screw (4mm x 8mm)
Side Guards x 8
<>X8
3.
Assembly Instruction
Step 1 Remove the 4 legs from the box screw the leg levelers onto it. Attach
:;
onto the bottom of the table Align the holes of legs to the holes on
the bottom of the table, and then secure it with big flathead
and flat
washer (8mm x 16mm)
leg levelers x 4
.
screw (5mm x 35mm)
roundhead screw (8mm x 25mm)
flat washer (8mm x 16mm)
Step 2 Once the legs are tightly
:
screwed on to the table base,
flip and position the table by
90 degree angle this action
;
would require at least 3~4
people, then flip it again in
same manner to conclude
with the upright position as
shown on the diagram:
FINISHED PICTURE
4.
Assembling Instruction
Step 3 Attach the center guard on one side with big flathead screw (5mm x 15mm).
:
As to the other side, insert the center guard into the iron plate first before
screw it tightly
.
Insert the center guard into the other
side first and then screw to the iron
plate
,
.
Screw the iron plate on one side with
big flathead screw (5mm x 15mm)
FINISHED PICTURE
()Finished as shown
5.
Loading...