Sega GHOST SQUAD DELUXE TYPE User Manual

1ST PRINTING FEBUARY ‘05

www.sauservice.com

Upright Version

Owner’s Manual

SEGA AMUSEMENTS USA, INC.

MANUAL NO. 999-2306

GAME CODE: CTF

VISIT OUR WEBSITE!

Now with a new look to make your experience

that much easier.

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

To maintain the safety:

To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the opera tion of the product. After carefully reading and sufﬁciently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary.

Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to understand the contents of the displays before reading the text.

Indicates that mishandling the prod uct by disregarding this warning will cause a potentially hazardous

WARNING!

situation which can result in death or serious injury.

CAUTION!

Indicates that mishandling the product by disregarding this caution will cause a slight hazardous situation which can result in personal injury and or material damage.

For the safe usage of the product, the following pictographs are used:

Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment, this display is attached to places where the Owner’s Manual and or Service Manual should be referred to.

Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions can cause accidents. In the case where only those who have technical expertise should perform the work to avoid hazardous situation, the instructions herein state that the serviceman should perform such work.

Be sure to turn off power before working on the machine.

To prevent electric shock, be sure to turn off power before starting the work in which the worker touches the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual herein always states to that effect.

Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord with earth is used). This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Ter minal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the Control equipment, ensure that the Earth Wire is ﬁrmly connected to the Control equipment.

Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.

This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth Leakage Breaker can cause a ﬁre when earth leakage occurs.

Be sure to use fuses which meet the speciﬁed rating.

Using fuses exceeding the speciﬁed rating can cause a ﬁre and electric shock.

(only for the machines which use fuses).

Speciﬁcation changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the ofﬁce herein stated. SEGA shall not be held responsible for any accidents, compensation for damage to a third party, resulting from the speciﬁcations not designated by SEGA.

Ensure that the product meets the requirements of appropriate Electrical Speciﬁcations.

Before installing the product, check for Electrical Speciﬁcations. SEGA products have a nameplate on which Electrical Speciﬁcations are described. Ensure that the product is compatible with the power supply voltage and frequency requirements of the location. Using any Electrical Speciﬁcations different from the designated Speciﬁcations can cause a ﬁre and electric shock.

Install and operate the product in places where appropriate lighting is available, allowing warning labels to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused. Ensure that where the product is operated has sufﬁcient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with where the product was purchased from or the ofﬁce herein stated.

When handling the Monitor, be very careful. (Applies only to the product w/monitor.)

Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be performed only be those technical personnel who have knowledge of electricity and technical expertise.

Be sure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.)

Do not operate the product leaving on-screen ﬂickering or blurring as it is. Using the product with the monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers.

When transporting or reselling this product, be sure to attach this manual to the product.

In the case where commercially available monitors and printers are used in this product, only the contents relating to this product are explained herein. Some commercially available equipment has functions and reactions not stated in this manual. Read this manual together with the speciﬁc Instruction Manual of such equipment.

•

Descriptions herein contained may be subject to improvement changes without notice.

•

The contents described herein are fully prepared with due care. However, should any question arise or errors be found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on power, check the following points to ensure that the product has been transported in a satisfactory status. Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet? Are Casters and Adjusters, damaged? Do the power supply voltage and frequency requirements meet with those of the location? Are all wiring connectors correctly and securely connected? Unless connected in the correct direction, connector connections can not be made accurately. Do not insert connectors forcibly. Do power cords have cuts and dents? Do the fuses used meet speciﬁed rating? Is the Circuit Protector in an energized status? Are all accessories available? Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be ﬁrmly closed?

TABLE OF CONTENTS

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION OF THE OWNER’S MANUAL

1. HANDLING PRECAUTIONS ..........................................................................................

2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ...................................

3. OPERATION .....................................................................................................................

4. ASSEMBLY AND INSTALLATION . ...............................................................................

5. PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE .........................

6. GAME CONTENTS ...........................................................................................................

7. EXPLANATION OF TEST AND DATA DISPLAY ...........................................................

8. CONTROL UNIT (GUN CONTROLLER) ........................................................................

9. MONITOR ...........................................................................................................................

10. COIN SELECTOR ..............................................................................................................

11. DESIGN RELATED PARTS ...............................................................................................

12. PARTS .................................................................................................................................

13. WIRE COLOR CODE TABLE ...........................................................................................

14. WIRING DIAGRAMS ........................................................................................................

1 - 2

3 - 4

5 - 8

9 - 17

19 - 35

36 - 59

60 - 66

67 - 69

70 - 72

74 - 80

XXX

SPECIFICATIONS

Installation Space : 44.5 inches width X 71 inches depth Height : 84 inches Width : 34.5 inches Length : 63 inches Weight : 400 lbs Power, maximum current : 420 W 3.5 A (AC 120V 60 Hz AREA)

MONITOR : 29 in. Type Display supplied by Sanwa Monitor: 998-0162 Chassis: 998-0161

INTRODUCTION OF THE OWNERS MANUAL

This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards the product,

SEGA GHOST SQUAD UPRIGHT TYPE

This manual is intended for the owners, personnel and managers in charge of operation of the product. Operate the product after carefully reading and sufﬁciently understand ing the instructions. If the product fails to function satisfactorily, non-technical personnel should under no circumstances touch the internal system. Please contact where the product was purchased from.

Use of this product is unlikely to cause physical injuries or damages to property. However, where special attention is required this is indicated by a thick line, the word "IMPORTANT" and its sign in this manual.

Indicates that mishandling the product by disregarding this display can cause the

STOP

product's intrinsic performance not to be obtained, resulting in malfunctioning.

IMPORTANT!

SEGA AMUSEMENTS USA, INC. / CUSTOMER SERVICE 45133 Industrial Drive, Fremont, California 94538, U.S.A. Phone : (415) 701-6580 Fax : (415) 701-6594

� PRODUCTION DATE �

This SEGA product was produced in the year of:

2005

This signiﬁes that this work was disclosed in 2005.

DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN













Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's main

WARNING!

Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the location's maintenance man or the serviceman. It is instructed herein that particularly hazardous work should be performed by the serviceman who has technical expertise and knowledge.

The location's maintenance man and serviceman are herein deﬁned as follows:

"Location's Maintenance Man" :

Those who have experience in the maintenance of amusement equipment and vending machines, etc., and also participate in the servicing and control of the equipment through such routine work as equip ment assembly and installation, servicing and inspections, replacement of units and consumables, etc. within the Amusement Facilities and or locations under the management of the Owner and Owner's Operators of the product.

tenance man or a serviceman to carry out, or work which is not explained in this manual. Failing to comply with this instruction can cause a severe accident such as electric shock.

Activities of Location's Maintenance Man :

Assembly & installation, servicing & inspections, and replacement of units & consumables as regards amusement equipment, vending machines, etc.

Serviceman :

Those who participate in the designing, manufacturing, inspections and maintenance service of the equipment at an amusement equipment manufacturer. Those who have technical expertise equivalent to that of technical high school graduates as regards electricity, electronics and or mechanical engineering, and daily take part in the servicing & control and repair of amusement equipment.

Serviceman's Activities :

Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of amusement equipment and vending machines.

1. HANDLING PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cau tionary matters herein stated can cause personal injury or damage to the machine.

� Before performing work, be sure to turn power off. Performing the work with-

out turning power off can cause an electric shock or short circuit. In the case

WARNING!

work should be performed in the status of power on, this manual always states to that effect.

� To avoid electric shock or short circuit, do not plug in or unplug quickly. � To avoid electric shock, do not plug in or unplug with a wet hand. � Do not expose Power Cords and Earth Wires on the surface, (ﬂoor, passage,

etc.). If exposed, the Power Cords and Earth Wires are susceptible to damage. Damaged cords and wires can cause electric shock or short circuit.

� To avoid causing a ﬁre or electric shock, do not put things on or damage Power

Cords.

� When or after installing the product, do not unnecessarily pull the power cord.

If damaged, the power cord can cause a ﬁre or electric shock.

� In case the power cord is damaged, ask for replacement through where the

product was purchased from or the ofﬁce herein stated. Using the cord as is damaged can cause ﬁre, electric shock or leakage.

� Be sure to perform grounding appropriately. Inappropriate grounding can cause

an electric shock.

� Be sure to use fuses meeting speciﬁed rating. Using fuses exceeding the speci-

ﬁed rating can cause a ﬁre or electric shock.

� Completely make connector connections for IC BD and others. Insufﬁcient

insertion can cause an electric shock.

� Speciﬁcation changes, removal of equipment, conversion and/or addition, not

designated by SEGA are not permitted.

• Failure to observe this may cause a ﬁre or an electric shock. Non-compliance with this instruction can have a bad inﬂuence upon physical conditions of the players or the lookers-on, or result in injury during play.

• SEGA shall not be held responsible for damage, compensation for damage to a third party, caused by speciﬁcation changes not designated by SEGA.

� Be sure to perform periodic maintenance inspections herein stated.

www.seuservice.com

STOP

IMPORTANT!

� For the IC board circuit inspections, only the logic tester is allowed. The use of

a multiple-purpose tester is not permitted, so be careful in this regard.

� Some parts are the ones designed and manufactured not speciﬁcally for this

game machine. The manufacturers may discontinue, or change the speciﬁc ations of, such general-purpose parts. If this is the case, Sega cannot repair or replace a failed game machine whether or not a warranty period has expired.

www.seuservice.com

PRECAUTIONS CONCERNING INSTALLATION LOCATION

This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a ﬁre, electric shock,

WARNING!

injury and or malfunctioning.

� Places subject to rain or water leakage, or places subject to high humidity in the

proximity of an indoor swimming pool and or shower, etc.

� Places subject to direct sunlight, or places subject to high temperatures in the

proximity of heating units, etc.

� Places ﬁlled with inﬂammable gas or vicinity of highly inﬂammable/volatile

chemicals or hazardous matter.

� Dusty places. � Sloped surfaces. � Places subject to any type of violent impact. � Vicinity of anti-disaster facilities such as ﬁre exits and ﬁre extinguishrs. � The operating (ambient) temperature range is from 5°C to 30°C.

LIMITATIONS OF USAGE REQUIREMENTS

� Be sure to check the Electrical Speciﬁcations. Ensure that this product is compatible with the location's power supply, voltage

WARNING!

and frequency requirements.

A plate describing Electrical Speciﬁcations is attached to the product. Non-compliance with the Electrical Speciﬁcations can cause a ﬁre and electric

shock.

� This product requires the Breaker and Earth Mechanisms as part of the location

facilities. Using them in a manner not independent can cause a ﬁre and electric shock.

� Ensure that the indoor wiring for the power supply is rated at 3.5 A or higher

(AC single phase 100~120 V area). Non-compliance with the Electrical Speci ﬁcations can cause a ﬁre and electric shock.

� Be sure to independently use the power supply equipped with the Earth Leakage

Breaker. Using a power supply without the Earth Leakage Breaker can cause an outbreak of ﬁre when earth leakage occurs.

� Putting many loads on one electrical outlet can cause generation of heat and a

ﬁre resulting from overload.

� When using an extension cord, ensure that the cord is rated at 3.5 A or higher

(AC 100~120 V area). Using a cord rated lower than the speciﬁed rating can cause a ﬁre and electric shock.

www.seuservice.com

OPERATION AREA

� For the operation of this machine, secure a minimum area of 34.5 in. (W) × 78

WARNING!

� Be sure to provide sufﬁcient space so as to allow this product's ventilation fan to

� SEGA shall not be held responsible for damage, compensation for damage to a

in. (D). In order to prevent injury resulting from the falling down accident dur ing game play, be sure to secure the minimum area for operation.

function efﬁciently. To avoid machine malfunctioning and a ﬁre, do not place any obstacles near the ventilation opening.

third party, resulting from the failure to observe this instruction.

STOP

IMPORTANT!

For transporting the machine into the location's building, the minimum necessary dimensions of the opening (of doors, etc.) are 1 m (W) and

1.7 m (H).

Electric current consumption

MAX. 3.5 A (AC 120 V 60 Hz)

www.seuservice.com

*NOTE: Picture may differ from actual unit.

FIG. 2

Approx.5mm

EnsurethatalloftheAdjustersareincontactwiththefloor.

3. OPERATION

PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION

To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players.

In order to avoid accidents, check the following before starting the operation:

� To ensure maximum safety for the players and the customers, ensure that where

WARNING!

the product is operated has sufﬁcient lighting to allow any warnings to be read. Operation under insufﬁcient lighting can cause bodily contact with each other, hitting accident, and or trouble between customers.

� Be sure to perform appropriate adjustment of the monitor (projector). For

operation of this machine, do not leave monitor's ﬂickering or deviation as is. Failure to observe this can have a bad inﬂuence upon the players' or the custom ers' physical conditions.

� It is suggested to ensure a space allowing the players who feel sick while play-

ing the game to take a rest.

� Check if all of the adjusters are in

contact with the surface. If they are not, the Cabinet can move and cause an accident.

*NOTE: Picture may differ from actual unit.

FIG. 3

www.seuservice.com

� Do not put any heavy item on this product. Placing any heavy item on the prod-

WARNING!

� Do not climb on the product. Climbing on the product can cause falling down

� To avoid electric shock, check to see if door & cover parts are damaged or omit-

� To avoid electric shock, short circuit and or parts damage, do not put the follow-

Flower vases, flowerpots, cups, water tanks, cosmetics, and receptacles/

� To avoid injury, be sure to provide sufﬁcient space by considering the poten-

CAUTION!

� Every day when cleaning the Control Unit (Shotgun), inspect the Shotgun and

uct can cause a falling down accident or parts damage.

accidents. To check the top portion of the product, use a step.

ted.

ing items on or in the periphery of the product.

containers/vessels containing chemicals and water.

tially crowded situation at the installation location. Insufﬁcient installation space can cause making bodily contact with each other, hitting accidents, and or trouble between customers.

make sure that there are no scratches or cracks in the surface, and that the fas tening screws are not loose. If the game is played with scratches, cracks or loose screws it can cause injuries to the player or to people nearby.

STOP

Players with bare hands directly hold the controller. For operation, it is recommended that the wet towels (paper towels) be provided.

IMPORTANT!

WARNING: HAZARD TO EPILEPTICS.

� A very small portion of the population has a condition which may cause them

WARNING!

� If you or anyone in your family has experienced symptoms linked to an epi-

� We recommend that parents observe their children while they play video

to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of ﬂashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

leptic condition (e.g., seizures or loss of awareness), immediately consult your physician before using any video games.

games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.

www.seuservice.com

PRECAUTIONS TO BE HEEDED DURING OPERATION(PAYING ATTENTION TO CUSTOMERS)

To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players.

� To avoid injury and accidents, those who fall under the following categories are

not allowed to play the game.

• Those who need assistance such as the use of an apparatus when walking.

• Those who have high blood pressure or a heart problem.

• Those who have experienced muscle convulsion or loss of consciousness when

playing video game, etc.

• Those who have a trouble in the neck and or spinal cord.

• Intoxicated persons.

• Pregnant women or those who are in the likelihood of pregnancy.

• Persons susceptible to motion sickness.

• Persons whose act runs counter to the product's warning displays.

� A player who has never been adversely affected by light stimulus might experi-

ence dizziness or headache depending on his physical condition when playing the game. Especially, small children can be subject to those conditions. Cau tion guardians of small children to keep watch on their children during play.

� Instruct those who feel sick during play to have a medical examination. � To avoid injury resulting from falling down and electric shock due to spilled

drinks, instruct the player not to place heavy items or drinks on the product.

� To avoid electric shock and short circuit, do not allow customers to put hands

and ﬁngers or extraneous matter in the openings of the product or small open ings in or around the doors.

� To avoid falling down and injury resulting from falling down, immediately stop

the customer's leaning against or climbing on the product, etc.

� To avoid electric shock and short circuit, do not allow the customers to unplug

the power plug without a justiﬁable reason.

� Be sure to instruct the adult responsible for children to watch them. Children cannot sense danger. Approaching the player during play may result

in accidental contact, collisions or falls.

If the Shotgun is pulled from the Gun Holder and dropped on the head it may

cause injury.

� Caution the player not to wrap the Shotgun cord around his/her wrist or neck,

as this can lead to serious injury.

www.seuservice.com

CAUTION!

� Immediately stop such violent acts as hitting and kicking the product. Such

violent acts can cause parts damage or falling down, resulting in injury due to fragments and falling down.

� To avoid injury resulting from falling down, immediately stop the customer's

leaning against or sitting down on the Gun Holder. Such acts can cause parts damage/deformation.

� Be sure to immediately stop any violent play, such as waving the Riﬂe around

or rapid back and forth action, as this may cause injury to the player or people nearby.

� If the player is too close to the Cabinet, the Riﬂe can strike the Cabinet during

play and cause accidents. Be sure to caution the player to maintain a safe distance from the Cabinet while playing.

� When 2 people are playing at the same time, be sure to caution them keep a

safe distance from the other player. The Riﬂe is long and can strike the other player if it is waved carelessly.

� Be sure to caution the player to grip the Riﬂe ﬁrmly while playing. If the Riﬂe

is dropped, it can cause injury to the player.

� Large rings etc., can cause injury to the ﬁngers during play. Be sure to caution

the player to remove accessories that may cause accidents before commencing play.

� Be sure to caution players not to have 2 or more people holding 1 Riﬂe, as this

may result in accidental contact or collision.

STOP

IMPORTANT!

The Riﬂes for use on 1P side (left side) and 2P side (right side) are different. Ensure that players do not confuse the right and left side guns when starting play.

www.seuservice.com

4. ASSEMBLING AND INSTALLATION

● Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard.

WARNING!

● Perform assembling as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per speciﬁed performance.

● When assembling, be sure to use plural persons. Depending on the assembly work, there are some cases in which working by one person alone can cause personal injury or parts damage.

● Ensure that connectors are accurately connected. Incomplete connections can cause electric shock hazard.

● Be careful not to damage the wires. Damaged wires may cause electric shock or short circuit or present a ﬁre risk.

● Do not carelessly push the PTV. Pushing the PTV carelessly can cause the PTV to fall down.

● This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by non-technical personnel can cause a severe accident such as electric shock. Failing to comply with this instruction can cause a severe accident such as electric shock to the player during operation.

● Provide sufﬁcient space so that assembling can be performed. Performing work in places with narrow space or low ceiling may cause an accident and assembly work to be difﬁcult.

● To perform work safely and avoid serious accident such as the cabinet's falling down, do not perform work in places where step-like grade differences, a ditch, or slope exist.

CAUTION!

● When handling plastic parts, use care. Do not give a shock or apply excessive load to the ﬂuorescent lamps and plastic parts. Failure to observe this can cause parts damage, resulting in injury due to fragments, cracks and broken pieces.

● To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Performing work without using the step can cause violent falling down accidents.

● Make sure that the GD cable connector is inserted parallel to the plug. Improper insertion may cause damage to the connector and present a ﬁre risk.

www.seuservice.com

When carrying out the assembling and installation, follow the following 8-item sequence.

INSTALLING THE GD-ROM DRIVE (SETTING GD-ROM DISC)

POWER SUPPLY, AND EARTH CONNECTION

TURNING POWER ON

The master key (accessories) in addition to the tools such as a Phillips type screwdriver, wrench, socket wrench and Ratchet Handle are required for the assembly work.

Phillips type screwdriver

WRENCH (for hexagon bolt)

TAMPERPROOF WRENCH T-40 Torx 5/16-18 (1) T-27 Torx 1/4-20 (1) T-15 Torx 8/32 (1) T-10 Torx (1)

Tool (Included with Unit)

www.seuservice.com

INSTALLING THE GD-ROM DRIVE (SETTING GD-ROM DISC)

STOP

IMPORTANT!

This section explains how to remove the ASSY MAIN BD from the PTV cabinet, set the GD-ROM disk onto the GD-ROM drive, and install the GD-ROM drive onto the ASSY MAIN BD.

Unpack the shipping

crate, and take out the GD-ROM drive, GDROM drive bracket, and GD-ROM disc.

● Carefully handle the GD-ROM drive so as not to contaminate the disc and the readout lens with stains and dust particles.

● Do not continue to use the scratched GD-ROM disc. The scratched GD-ROM disc may cause the system to malfunction.

● Set the GD-ROM disc onto the GD-ROM drive with its labeled side facing upward.

● The key chip is a precision device. Handle it carefully and avoid exposure to heat, shock and static electricity, as these may cause damage to the device.

● The key chip is contained in the GD-ROM disc case. Always use them as a set.

GD DRIVE BRACKET GD-ROM DRIVE

PHOTO 6. 5 a

Use the 4 tapping screws to ﬁx the GD-ROM drive bracket onto the GD-ROM drive. Be careful

about a ﬁxing direction.

TAPPING SCREW (4) 4×8

GD DRIVE BRACKET

FIG. 6. 5 b

CAUTION for U. S. A., Europe, and Australia:

GD-ROM DRIVE

Attach the 2 caution stickers for a laser ray onto the GD-ROM drive.

FIG. 6. 5 a

www.seuservice.com

Remove the 1 truss head screw that

ﬁxes the GD-ROM drive lid (DISC LID). And turn clockwise the lid to remove.

TRUSS SCREW (1) M3×8

PHOTO 6. 5 b

Set the GD-ROM disc onto the GD-ROM drive with its labeled side facing upward.

Return the lid to its original place, and ﬁx it with 1 truss head screw. Be careful not to fasten the

screw too tightly.

PHOTO 6. 5 c

TRUSS SCREW (1) M3×8

www.seuservice.com

Place the ASSY MAIN BD on a

ﬂat vertical surface.

Using th e 4 scr ews, fix the

GD-ROM drive onto the ASSY MAIN BD.

SCREW (4) M4×16, w/flat & spring washers

PHOTO 6. 5 h

Insert both the GD cable connector (for data communication) and the power cord connector (JST

NH6P) into the GD-ROM drive. Be careful about an inserting direction in this instance. Make sure that the connectors are inserted ﬁrmly and completely.

Power Cord connector

*NOTE: Picture may differ from actual unit.

PHOTO 6. 5 i

GD Cable connector

www.seuservice.com

Insert the Key Chip straight into the

SCFIR

QCFIR

BDSE

RIAL

NO.

FIRMW

ARE

VERSION

GAME

BOARD

PART

SNO.

MAINB

OARAD

PARTS

REGIO

MEDIA

BOAR

DPARTS

NO.

BOOT

VERSIO

PROJECTION

KEYCHIP

MEDI ABOARD

hole in the top of the Media Board on the upper part of the Game Board. Carefully check the direc

tion the Key Chip is facing, and push it in as far as it will go.

PHOTO 6. 5 k

Attach the accessory stickers to both the Game Board and the Media Board.

KEY CHIP

www.seuservice.com

FIG. 6. 5 c

POWER SUPPLY, AND EARTH CONNECTION

● Be sure to independently use the power supply socket outlet equipped with

WARNING!

● Ensure that the "accurately grounded indoor earth terminal" and the earth wire

● Ensure that the power cord and earth wire are not exposed on the surface (pas-

● After wiring power cord on the ﬂoor, be sure to protect the power cord. Ex-

an Earth Leakage Breaker. Using a power supply without an Earth Leakage Breaker can cause a ﬁre when electric leakage occurs.

cable are available (except in the case where a power cord plug with earth is used). This product is equipped with the earth terminal. Connect the earth ter minal and the indoor earth terminal with the prepared cable. If the grounding work is not performed appropriately, customers can be subjected to an electric shock, and the product's functioning may not be stable.

sage, etc.). If exposed, they can be caught and are susceptible to damage. If damaged, the cord and wire can cause electric shock and short circuit accidents. Ensure that the wiring position is not in the customer's passage way or the wiring has protective covering.

posed power cord is susceptible to damage and causes an electric shoc accident.

The AC Unit is located on one side of Cabinet. The AC Unit has Main SW, Earth Terminal and the Inlet which connects the Power Cord.

Ensure that the Main SW is OFF.

MAIN SW

Main SW off

CIRCUIT PROTECTOR

AC Cable (Power Cord)

*NOTE: Picture may differ from actual unit.

INLET

FIG. 6. 6 a AC unit

To the Power Supply Socket outlet

www.seuservice.com

TURNING POWER ON

Turn on the AC unit's main switch to connect the power. When the power is connected, the ﬂuorescent light in the billboard becomes on. A few seconds later a system startup screen appears and then an advertising screen (plying for a player screen) appears.

Time until displaying an advertising screen is not constant; it varies from some tens of second up to several minutes. This is due to the functional characteristics of the GD-ROM system's rechargeable battery and therefore normal.

When an advertising screen appears, sound is output from the speakers on the right and left of the PTV cabinet. Sound is not output if you have set the function to off. After the power is disconnected, the system can maintain the data of credit number and ranking. The system cannot maintain, however, the fractional number of coins (not enough for one credit) and the bonus adder count data.

Lights light up

Screen outputs Graphics

Sound is emmited

*NOTE: Picture may differ from actual unit.

FIG. 6. 7

www.seuservice.com

THE INTERFERENCE PREVENTION WIRING

● In order to prevent electric shock and short circuit hazards, be sure to turn

power off before performing work.

WARNING!

● Be careful not to damage the wires. Damaged wires may cause electric shock

or short circuit or present a ﬁre risk.

● Do not expose the IC BD, etc. without a good reason. Failure to observe this

can cause electric shock hazard or malfunctioning.

● Work should be performed by the Location's Maintenance Man or technical

personnel. Performing work by those who do not have technical knowledge and expertise can cause electric shock accident or malfunctioning.

When the game machines of a same or similar type are installed side by side, their sensors may interfere with each other. To reject the interference, follow the procedure below. The following game machines employ a same or similar type of sensor. If interference happens to the sensors, operation of the games may be mutually disturbed.

• THE HOUSE OF THE DEAD 2, U/R type, DX type and Super DX type

• THE LOST WORLD, U/R type, DX type and Super DX type

• BRAVE FIRE FIGHTERS

• SAMBA DE AMIGO

• CONFIDENTIAL MISSION, U/R type and DX type

• SHAKATTO TAMBOURINE

• THE MAZE OF THE KINGS, U/R type and DX type

Locate an interference rejection wire inside the cabinet.

If the game machines of a same or similar type are installed side by side, place them alternately (place the machine with an interference rejection wire next to the machine without).

INTERFERENCE PREVENTION WIRING SPY-60019

PHOTO 6. 8

*NOTE: Picture may differ from actual unit.

www.seuservice.com

PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE

● When moving the machine, be sure to pull out the plug from the power supply.

Moving the machine with the plug as is inserted can cause the power cord to

WARNING!

be damaged and could result in a ﬁre and or electric shock.

● When moving the machine on the ﬂoor, retract the Adjusters and ensure that

Casters make contact with the ﬂoor. During transportation, pay careful atten tion so that Casters do not tread power cords and earth wires. Damaging the power cords can cause an electric shock and or short circuit.

● When lifting the cabinet, be sure to hold the catch portions or bottom part.

Lifting the cabinet by holding other portions can damage parts and installation portions due to the empty weight of the cabinet, and cause personal injury.

CAUTION!

STOP

● Do not move the product with a GD-ROM disk inside. Remove the

GD-ROM disk before moving the product.

● Failure to observe this instruction may cause the GD-ROM disk and/or GD-

ROM drive to be damaged.

● Do not hold or press the plastic parts. Failure to observe this instruction may

break the parts, and eventually the broken pieces may cause a personal injury.

When moving the Cabinet, do not hold or push on the Gun Holder, as this may deform or damage the part.

IMPORTANT!

www.seuservice.com

6. GAME CONTENTS

The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves different from the following contents, some sort of faults may have occurred. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation.

While the power is connected, the ﬂuorescent light in the billboard is on and demonstration images and ranking data are displayed. During this advertising period, sound is also output from the speakers in the center of the cabinet. Sound is not output if you have set the function to off. Each of the right and left start buttons is integrated with a light. The light ﬂashes when coins are inserted sufﬁciently for a play. The light goes out when the start button is pressed to start the game.

Fluorscent lamp is lit

FIG. 8

*NOTE: Picture may differ from actual unit.

OnScreen images are outputted

Sound is emitted

Start Button

Controller

Coin Inlet

SHOT SELECTOR

ACTION BUTTON

TRIGGER

GUN CONTROLLER

www.seuservice.com

This manual explains the game details when used with IC Cards. The game content for cabinets without IC Card Units or games played without the use of an IC Card ("Only without the IC Card") is explained separately as needed.

(1) GAME OUTLINE

The player is a member of the special forces unit, "Ghost Squad", out to suppress vicious terrorists. Each mission contains multiple routes, allowing the player to choose how to proceed. Special events occur throughout the game depending on the route chosen, such as securing hostages or providing friendly cover ﬁre.

This game also supports the use of IC Cards. Players can enjoy a number of additional features recorded on IC Cards, including character name, score, experience accumulation, changes in rank, item collection, and added mission routes and events. Plus, by using the password displayed following a game, players can also access an Internet Ranking.

[When no IC Card is being used, the recording of player information and Internet Ranking access are not available. Also, play will be limited to certain mission routes and items.]

(2) GAME CONTROLS

The game is controlled with the cabinet START buttons and the provided sub-machinegun-style gun controllers. Each gun controller is equipped with 3 buttons, the TRIGGER, ACTION and SHOT SELECTOR buttons.

• START BUTTON : Used for starting the game and skipping event descriptions.

• TRIGGER : Used for ﬁring (shooting bullets) and panel selection.

• ACTION BUTTON : Used during events and for skipping demo scenes.

• SHOT SELECTOR : Used to switch between ﬁring modes (single shot, 3-shot burst, full auto).

ACTION BUTTON

PLAYER 1 START BUTTON

SHOT SELECTOR

TRIGGER

c PLAYER 1 CARD SLOT

PLAYER 2 START BUTTON

[c: Only for cabinets equipped with IC Card Units.]

www.seuservice.com

c PLAYER 2 CARD SLOT

(3) CHARACTERS

l Alpha Unit

The Alpha Unit are the main characters in the game and are young hot-shot members of "Ghost Squad", an unofﬁcial unit of the anti-terrorist group, "M.O.P." (Multiple-Operation-Program)

l Fellow M.O.P. Members

The Commander provides radio backup and pertinent advice to the Alpha Unit. Also assisting the Alpha Unit in operations are Bravo Unit and Charlie Unit. These two units assist the players in suppressing the terrorist threat.

COMMANNDER UNIT BRAVO UNIT CHARLIE

www.seuservice.com

+ 64 hidden pages