Sega AQUARACE User Manual

User Manual

VER. 0.2

 For your safe and correct use, read this manual carefully and understand it

thoroughly before operation.

 Please keep this manual in a safe place at all times and refer to it for any

future references.

 Make sure to pass this manual on to future owners of Mini Rider2 when the

product is moved or sold.

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the operation
of the product. After carefully reading and sufficiently understanding the warning displays and cautions,
handle the product appropriately. Be sure to keep this manual close to the product or in a convenient place
for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on the
potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.
Be sure to understand the contents of the displays before the text.

Indicates that mishandling the
product by disregarding this
pictograph will cause severe injury
or death.

Indicates that mishandling the
product by disregarding this
warning will cause a potentially
hazardous situation which can
result in death or serious injury.

Indicates that mishandling the
product by disregarding this
caution will cause a slight
hazardous situation which can
result in personal injury and/or
material damage.

For safe usage of this product, the following pictographs are used:

Indicates “HANDLE WITH CARE.” In order to protect the human body and equipment, this
display is attached to places where the User Manual should be referred to.

Indicates a “Protective Earth Terminal.” Before operating the equipment, be sure to connect it
to the Ground.
(The step may be omitted for products in which a power cord with earth is used.)

● Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to
perform work as per the instructions can cause accidents. In the case where only those who have
technical expertise should perform the work to avoid hazardous situation, the instructions herein state
that the serviceman should perform such work.

● Be sure to turn off power before working on the machine.

To prevent electric shock, be sure to turn off power before starting the work in which the worker touches
the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual
herein always states to that effect.

● Be sure to ground the Earth Terminal. (This is not required in the case where a power cord with earth

is used.)
This product equipped with the Earth Terminal. When installing the product, connect the Earth Terminal
to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the
Control equipment, ensure that the Earth Wire is firmly connected to the Control equipment.

● Ensure that Power Supply used is equipped with an Earth Leakage Breaker.

This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not
equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.

SIMULINE INC..

1

● Specification changes (removal of equipment, conversion and addition) not designated by

Simuline are not allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc. It is very
hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and
protective parts be damaged or lost, refrain from operating the product, and contact where the product
was purchased from or the office herein stated. Simuline shall not be held responsible for any accidents,
compensation for damage to a third party, resulting from the specifications not designated by Simuline.

● Ensure that the product meets the requirements of appropriate Electrical Specification.

Before installing the product, check for Electrical Specifications. Simuline products have a nameplate on
which Electrical Specifications are described. Ensure that the product is compatible with the power
supply voltage and frequency requirements of the location. Using any Electrical Specifications different
from the designated Specifications can result in a fire and electric shock.

● Install and operate the product in places where appropriate lighting is available, allowing warning

labels to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially hazardous
situation are applied to places where accidents can be caused. Ensure that where product is operated
has sufficient lighting allowing the warnings to be red. If any label is peeled off, apply it again immediately.
Please place an order with where the product was purchased from or the office herein stated.

● When handling the Monitor, be very careful. (Applies only to the product w/monitor)

Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some
portions are still subject to high tension sometimes. Monitor repair and replacement should be performed
only be those technical personnel who have knowledge of electricity and technical expertise.

● Be sure to adjust the monitor (projector) properly. (Applies only to the product w/monitor)

Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the
monitor net properly adjusted may cause dizziness or a headache to an operator, a player, or the
customers.

● When transporting or reselling this product, be sure to attach this manual to the product.

In the case where commercially available monitors and printers are used in this product, only the
contents relating to this product are explained herein. Some commercially available equipment has
functions and reactions not stated in this manual. Read this manual together with the specific Instruction
Manual of such equipment.

 Description herein contained may be subject to improvement changes without notice.
 The contents described herein are full prepared with due care. However, should any question arise or

errors can be found, please contact Simuline.

SIMULINE INC..

2

◈◈◈◈ Table of contents ◈◈◈◈

INTRODUCTION TO THE MANUAL .................................................................................................................4

ABOUT WARRANTY .........................................................................................................................................5

1. HANDLING CAUTIONS .................................................................................................................................7

3. CAUTIONS: OPERATION............................................................................................................................10

4. SPECIFICATION ..........................................................................................................................................12

5. PARTS ..........................................................................................................................................................13

6. ACCESSORY ...............................................................................................................................................18

7. INSTALLATION ASSEMBLY .......................................................................................................................19

8. SAFETY FEATURE ......................................................................................................................................37

9. CONTROL PANEL .......................................................................................................................................38

10. CONTENTS OF THE GAME ......................................................................................................................39

11. TEST MODE...............................................................................................................................................46

12. HOW TO PLAY THE GAME (GUIDES FOR RIDERS) ..............................................................................54

13. SYSTEM OPERATION...............................................................................................................................56

14. NETWORK PLAY .......................................................................................................................................58

15. MONITOR...................................................................................................................................................62

16. REPAIR & MAINTENANCE .......................................................................................................................64

17. TROUBLESHOOTING ...............................................................................................................................65

18. PARTS LIST ...............................................................................................................................................68

SIMULINE INC..

3

Introduction to the Manual

Specifications noted in this manual may change without notice.
This manual contains all of the instructions regarding assembly, installation, and maintenance of
AQUARACE EXTREME

This manual is for the owner, manager and operators of the installation site.
This manual must be read thoroughly prior to the installation.
When the product is not working properly, do not attempt to perform any work to the machine unless you are
the trained site maintenance personnel or technician. Contact the service representative listed in this manual
for assistance.

If this manual is lost, contact the retailer or the service representative listed in this manual for a copy.

You will be able to find [IMPORTANT] sings throughout the manual where special attention is needed. This
sign does not concern any damage to property or human body.

When this sign is ignored, product will not perform its original performance or the product may
stop operating.

Simuline Inc.

461-28 Jeonmin-Dong, Yuseong-Gu,
Daejeon, 305-811 Korea

Tel: [phone]
Fax: [phone]
Email: [e-mail]
Website : http:// www.simuline.com

SIMULINE INC..

4

About Warranty

This product is covered by a limited 1 year warranty.
Any malfunctions caused by the factory defects are covered by this warranty policy and will be repaired at
manufacturer’s expense. If you encounter any malfunction, stop the operation, disconnect the power, and
contact the retailer or the service representative listed in this manual.

Below are the cases not covered by the warranty. Any repairs will be charged to the owner or the operator.

1) Malfunctions caused by NATURAL DISASTER.

2) Malfunctions caused by WATER or BREAKAGE caused by FALL.

3) Malfunctions caused by MISHANDLING.

4) Malfunctions caused by NOT FOLLOWING THIS MANUAL AT ALL TIMES.

5) Malfunctions caused by UNAUTHORIZED MODIFICATIONS (including ADDITIONS).

6) Malfunctions caused by INTENTIONAL DAMAGE TO THE PRODUCT.

7) Malfunctions caused by NOT FOLLOWING THE MAINTENANCE ROUTINE.

8) Detail examination conducted by manufacturer’s engineer, regular maintenance, moving the -product, re­installation.

9) Malfunctions caused by OTHER PRODUCTS. Malfunctions such as flickering of the screen caused by
MAGNETIC FIELDS, ELECTRICAL SIGNALS generated by near by products.

10) Parts classified as expendables
A – Switches, buttons
B – Any advertisement articles such as POP, banner and ETC.

※ The manufacturer is not responsible for the loss of income at the installed site caused by the

malfunctions of the product.

SIMULINE INC..

5

DEFINITION OF SERVICEMEN AND TECHNICIAN

Make sure all of the work to be done on this product is executed by Site Maintenance Personnel or
Technicians as noted in this manual. Any work that is not noted in this manual should not be
executed by anyone except for the trained(authorized) technicians. If this warning is not followed,
serious accidents such as electric shock or short circuit may occur.

Replacing any parts or maintenance work or any other work to the product must be done by the Site
Maintenance Personnel or Technicians. This manual strictly states that the work to the product must be done
by authorized personnel with professional knowledge. Definitions of the Site Maintenance Personnel and
Technicians are as follows.

● Site Maintenance Personnel :

Individuals with experience in maintaining amusement equipment, vending machines, etc., working
under the supervision of the owner/operator of this product to maintain machines within amusement
facilities or similar premises by carrying out everyday procedures such as assembly, maintenance
inspections, and replace of units/expendable parts.

- Duties of Site Maintenance Personnel : Installation, maintenance, and replacing parts of the
amusement machines or automatic vending machines.

● Technicians :

Persons employed by amusement equipment manufacturers or involved in design, production, testing or
maintenance of amusement equipment. The individual should have either graduated from technical
school or hold similar qualifications in electrical/electronics/mechanical engineering.

- Duties of Technicians : Installations of amusement machines. Repair or adjustments of the
electronics and parts.

SIMULINE INC..

6

1. HANDLING CAUTIONS

When installing, maintaining or handling the product, the following cautions should be observed in order to
enjoy the game safely.
Failure to follow the warnings listed below and in other parts of this manual may cause physical injuries or
damage to the machine.

● Before any installation or maintenance work, make sure to turn off the power. Failure to do so

may cause an electric shock or short-circuit. In case it is necessary to keep the power on for a
certain type of work, the manual will explicitly state so.

● Power cables/cords or grounding wires should not be exposed such as on a passage. The

exposure may cause physical injuries, possibly resulting in short-circuit or electric shock.

● Do not place any article on power cables/cords nor damage them, for it may cause a fire or

electric shock.

● Do not pull on the power cables/cords unnecessarily during or after installation. Damaged

cords may cause a fire or electric shock.

● Make sure to earth the product. Incorrect grounding may also cause an electric shock.

● Firmly connect IC boards and all connectors completely. Unstable connections may cause an

electric fire.

● Do not make any unauthorized changes or modifications to the product.
・ Doing so may cause fire or an electric shock. In some cases it can hurt and cause physical

injury to the user/operator or bystander.

・ The manufacturer and/or seller will not be liable for any accidents that occur on products that

have undergone unauthorized modifications or changes including but not limited to such
modifications and changes performed by a third party.

● Make sure to always execute the routine maintenance procedures specified in the manual.

● When cleaning the surface of the monitor, use a soft and dry cloth. Do not use chemicals such

as thinner or benzene.

● Static electricity in the human body can destroy electronic parts on IC boards. Make sure to

discharge any static electricity by measures such as setting hands to a grounded metal plate
before handling IC boards.

● There are some components/parts, which are not specially designed and manufactured for the

product. Please understand that in case the manufacturer of such components/parts
discontinues production or changes the specifications, it may not be possible to repair or
replace such products regardless of the warranted period.

SIMULINE INC..

7

2. INSTALLATION LOCATION CAUTIONS

The product is intended for indoor use. Therefore, do not install it outdoors.
Even when installed indoors, the following locations should be avoided. They may cause a fire,
electric shock or breakdown.
・ Places with raindrops or water leakage, or places with high humidity such as indoor swimming

pools or showers.

・ Places that have a high temperature such as places with direct sunlight or close to heating

sources.

・ Places near flammable gas, explosive chemical or dangerous substances.
・ Places that are dusty
・ Places with an incline.
・ Places with intense vibration
・ Places near anti-disaster facilities such as emergency exit or fire extinguisher
・ Any other place outside of the allowable temperature range (ambient temp.) of ５５５５℃℃℃℃~30℃℃℃℃.

RESTRICTIONS FOR USE

● Check your electric specifications.

Check whether the product conforms to the voltage, current and frequency provided at the
installation location. For the electric specifications, see the plate (label) attached on the
product.
If electric source outside of the specification is used, it can cause a fire or electric shock.

● Inside the installation location, a breaker and an earth connection for the product are required.

An independent electric source for the product should be provided to prevent fire or electric
shock.

● On the back side of the SCU, the power needed to operate the product is marked as single-

phase AC 200V, 208V, 220V, 230V, and 240V. Prepare a compliant power source.

● Make sure to use the power with independent circuit breaker. Using any power source without

circuit breaker can cause a fire.

● Do not have many electrical cords connected to a single socket. Overload can cause the

generation of heat or a fire.

Electric Power Consumption

MAX. 14.73A (AC200V 50/60Hz)

14.43A (AC220V 50/60Hz)

11.38A (AC240V 50/60Hz)

SIMULINE INC..

8

OPERATIONAL FLOOR AREA

● This product requires at least the space noted below for proper operation. This includes the

consideration for the space for pedestrians and maintenance. If not enough space is
provided, collisions and trouble may happen.

● 3334mm X 2171mm

● In case any accident occurs while the product is operated on a floor area less than specified,

the manufacturer will not be responsible for any liability or reparations.

● In case the product cannot fit through the entrance of a location, do not disassemble without

proper preparations. Disassemble only the parts as specified in this manual. Do not attempt a
disassembly procedure not described in this manual. Special tools and adjustment
procedures are required to disassemble/assemble much of the mechanical parts of the
product. Improper disassemble/assemble can lead to accident during disassembly/assembly
such as electrical shock and human injury. If the product does not fit through the entrance
even after the disassembly specified in this manual, contact the manufacturer/supplier or the
contact provided in this manual.

● This product requires opening of at least 2900mm of width and 1400mm of height to pass

through. Do not tilt the product or subassemblies in an attempt to pass through small
entrances. This can cause accidents during the transportation. In addition, it can cause damage
or deformation to parts and result in accidents during operation.

SIMULINE INC..

9

3. CAUTIONS: OPERATION

rest due to conditions

For safe operation, please obey the following warnings and instructions.

CAUTIONS: OPERATION

Check the following cautions before working hours to prevent accidents.

● To prevent any player or other customers from headache or dizziness, the product should be

installed in a well-lighted place so that warning signs can be clearly read. Improper lighting can
cause unexpected problems such as contact between customers, collision, and other
undesirable situations.

● Adjust the monitor appropriately.

If monitor blinking is detected, do not leave it un-adjusted. Inappropriate monitor adjustment can
cause dizziness or headache to players and other customers.

● Prepare a resting facility for players to take a rest in case he (she) needs to

such as motion sickness.

● Check whether the level adjusters are securely set to the ground. If not, the product is not

properly set and can result in an accident.

● Do not place any heavy article on the product. It can cause an accident if dropped and can also

damage components.

● Do not climb on the product. Accident can be caused from falling. If it is necessary to check the

top of the product, use a stepladder.

● Check whether any doors or cover sections are damaged or separated. It can cause electric

shock.

● Do not place the following articles on or inside the control panel, on top of the seat, on the top of

the product or in the vicinity of the product. Doing so may cause short-circuit, electric shock or
damage parts.

● Vase, pot, cup, water bucket, cosmetics and containers containing chemicals or water.

● Check the surroundings before turning the product on. Once it is turned on, the product is

automatically initialized. If anyone is too close to the product during initialization, collision with
the moving cabin can occur.

● For safe operation, make sure to execute a trial operation after power on. Since the cabin moves,

the product is equipped with safety devices. Please check whether these safety devices work
normally as follows.

· Does the seat belt secure the player properly?

· Is the seat belt free of damages or excessive wear?

· Does the motion stop automatically when the seat belt is loosened?

· Is the seat attached securely without looseness?

· Does the product stop the motion when the GAME STOP button is pressed?

· Does the product stop the motion when the sensors are tripped?

· Does the product stop the motion when the cabin sensor is tripped?

· Does the product stop the motion when the cabin door is opened?

● In addition to checking the safety devices, make sure that the product moves normally. Any

abnormal motion can cause accidents. Do not operate the product unless all abnormalities are
resolved.

· Does the product move smoothly?

· Is there any abnormal noise or sound when moving?

· Is there any abnormal vibration when moving?

● If an abnormality regarding the Cabin or the Actuator is found during inspection or operation,

stop the operation and contact the retailer or the service personnel listed in this manual. If the
operation does not stop even after an abnormal behavior of the product is found, serious
accidents/injury such as electric shock, short circuit, fire, and even death. For the maintenance
of the Cabin or the Actuator, please contact the service personnel listed in this manual. A
service person who is not authorized by the manufacturer should not carry out the service work
on this product. Serious accidents or injury may occur during the work. Also, serious
accidents or injury may occur to the passengers.

● To prevent any possible accidents, Fence must be installed properly and make sure the

movements of the cabin is within the Fence.

SIMULINE INC..

10

CAUTIONS : OPERATION (TO THE PLAYER)

To prevent accidents and/or unnecessary problems, alert players or customers to be aware of the following.

● Anyone who falls into one or more of the following should be prevented from playing the game.

It may cause an accident or injuries.

· Persons who need assistance when walking, and persons with high blood pressure or heart

disease.

· Persons who have experienced spasms/convulsions or motion sickness or unconsciousness’

after playing a TV video or similar game.

· Persons who have neck or backbone trouble.

· Pregnant women or persons who are intoxicated.

· Persons susceptible to vomiting from amusement rides.

· Persons that do not follow warning signs.

● Even persons who have never experienced discomfort due to phobic stimulation may

experience dizziness, nausea, and/or headaches from playing this game.

● If discomfort becomes severe, advice a player to consult a doctor.

● Do not place any heavy articles or beverages on top of the product. Accidents from the falling

articles and accidents due to electric shock can occur.

● Do not insert your finger or any foreign substances into any open parts or doors of the product.

It may cause electric shock or short-circuit.

● Do not lean on or climb on the product. It may cause accidents from falling and turnover of the

product.

● Do not pull out the power plug recklessly. It may cause short-circuit or electric shock.

● Person under the height of 90cm may not ride. Person with the height from 90cm to 120cm must

ride with a guardian or a parent.

● Person with the weight of 120kg and above may not ride. It may cause the product to

malfunction.

● Do not ride the product without the seatbelt fastened securely. The passenger can fall of the

ride. Passengers need to have the seatbelts fastened at all times.

● This product is a two-passenger ride. Do not seat more than 2 passengers.

● Do not let the passengers to have their children ride on their laps.

● Do not let people get too close to the moving cabin. It can cause collisions. Specially for little

children, use extra caution.

● Keep the feet inside the cabin at all times. If not, it can cause foot injuries.

● Remove objects such as bag straps or mufflers around the neck. Do not bring drinks into the

ride.

● Always watch the passengers and bystanders to prevent any possible trouble. They might act in

unexpected ways. Stop any dangerous behaviors for safety reasons.

SIMULINE INC..

11

4. Specification

■ Operation Area : 3320mm x 2175mm x 2272mm

■ Total Weight : ~750Kg

■ Maximum Power Consumption: 14.73A, 2467.7W (AC 200V, 50~60Hz)

14.43A, 2449.3W (AC 220V, 50~60Hz)

11.38A, 2301.6W (AC 240V, 50~60Hz)

■ Monitor : 46” LCD (Demo Display : 60” PDP)

■ Maximum Passenger weigh : Maximum 150kg / person

SIMULINE INC..

12

5. Parts

5-1. Cabin Parts

B I L L B O A R D

M O N I T O R

R E A R F R P

C O I N C H U T E T O W E R

S E N S O R ( L )

H A N D L E

M S C U

P E D A L

B E L L O W S

S ID E F E N C E S U P P O R T E R ( L )

L E F T F R O N T F E N C E

M S C U C A B L E C O V E R

R E A R F E N C E

R I G H T F R O N T F E N C E

S ID E F E N C E S U P P O R T E R ( R )

R E A R S ID E F E N C E ( R )

S E N S O R ( R )

SIMULINE INC..

13

SEAT

LINK JOINT

HANDLE

Item Description

MSCU
(Motion/System Control)

Coinchute Tower

Side Step Passenger loading step

Composed of SCU, MCU, ACU and Transformer-Controls Motion System

Composed of Coin Selector and Coin Vault.
The Coinchute Tower of this product has compatibility that various Coin
Frames can be installed.

BASE FRAME

ROLL ACTUATOR

HEAVE ACTUATOR

Billboard Publications board

Fence Keeps gallery away and guards the machine

Control Panel Game controls

Motion Actuator
Mechanism

Area Sensor

2 actuators and 2 joints for motion, anti-twist structure, links, and etc.

Safety Sensor. When triggered, cabin stops the motion and resumes in
3 seconds after the obstruction is removed.

SIMULINE INC..

14

5-2. MSCU(Motion/System Control Unit)

MCU

< MSCU Front Panel >

Lan Cable

SCU

Transformer

AC UNIT

VGA Cable(DVI type)

RS232 Cable

Coin Tower Cable Steetring Cable

< SYSTEM COMPUTOR >

Speaker Cable

System Computer

Motion BD

RS232 Cable

Can Cable

Amp Volume

< SCU Panel >

SIMULINE INC..

15

< MCU > < Transformer >

NO

1 MSCU Composed of SCU, MCU, ACU and Transformer-Controls Motion System

Item Description

SCU (System Control

2

Unit)

3 System Computer Computer that controls the entire machine including H/W and S/W

MCU

4

(Motor Control Unit)

5 Transformer

Composed of System Computer and SCU Panel – Controls System

Composed of 2 Servo motor drivers that controls the operation of 2
Actuators for motion

A transformer unit that can convert any country’s electricity to suite the
machine.

5-3. AC UNIT

Main Power Switch

Power Cable

< AC UNIT >

No

1

2

Main Power Switch

Item Description

When pushed to ON(1) position, system powers up and the
cabin moves to initial position. When pushed to OFF(0) position,
entire system shuts down.

Power Cable Power cable

SIMULINE INC..

16

5-4. Coinchute Tower & O.P Panel

Test Button should only be operated by an authorized personnel.

Test Button

Service Button

O.P Panel is located inside the Coinchute Tower Door.

NO

1 Choinchute Tower

2 Test Button

3 Service Button

Item Description

Coinchute Tower is composed of Coin Frame and Coin Vault.
Coinchute Tower is designed to work with various types of Coin Frame.

Used only when game settings need to be changed.
Goes into TEST mode when pressed during the Advertise Screen is
showing.

When pushed, credit is added to the game.
Used to raise credit while operation.

SIMULINE INC..

17

6. Accessory

MSCU Box Key 3

Coinchute Tower Key 2

Manual 1

Part Quantity

SIMULINE INC..

18

7. Installation Assembly

Do not expose the power cable, earth line and etc where people might walk over them.

● This product has a complex structures and equipments. Please follow the instructions in this

manual at all times. Misses in assembly may cause electric shock or damages to the machine
and cannot guarantee normal operation in those cases.

● Make sure there are a crew of 4 or more is available for installation. This machine cannot be

assembled by one technician. If the installation is carried out by one person, accidents or
damages to the machine may occur.

● Make sure all of the connectors are connected to the proper positions firmly. Insecure

connections may cause malfunctions or electric shocks.

● Make sure that none of the cables and harnesses are damaged during installation. Damaged

cables and harnesses can cause electric shocks or short circuit.

● This installation must be carried out by the manager of the store or the service manager. If an

unqualified personnel installs this machine, accidents may occur. Also, if the installation
instructions in this manual is not followed fully, severe accidents may occur to both of the
passengers and workers. If there are no technicians or site maintenance personnel are available
for installation, please contact the office listed in this manual.

● Make sure that the required space is available for the installation. The space required for the

installation is noted in this manual. Insufficient installation space may cause accidents during
installation.

● Slanted floor, gaps, elevation difference must be avoided for installation. Cabin or frames may

tip over and cause sever accidents.

●

Damaged cables may cause electric shocks or short circuits. Use cable floor molds to protect
them.

● Do not cover the vent at the back side of the MSCU. It may cause overheating and possibly fire.

● Refer to [2. Installation Location Cautions] prior to the installation. If not enough space is

provided, bodily injuries including even death or damages to the product.

● When multiple number of technicians are working at the same time, use extreme caution to

prevent any possible collisions and accidents.

Use caution while working with molded parts. Too much pressure can damage the parts. This
may cause injuries.

SIMULINE INC..

19

Installation is executed in the following order

(1) Locating the product at the installation site

(2) SENSOR installation

(3) SIDE FENCE SUPPORTER installation

(4) REAR SIDE FENCE installation

(5) REAR FENCE installation

(6) SIDE STEP installation

(7) RIGHT FRONT FENCE installation

(8) COINCHUTE TOWER installation

(9) LEFT FRONT FENCE installation

(10) BILLBOARD Installation

(11) MSCU Installation

(12) Power Cable

SIMULINE INC..

20

Tools needed for Installation

 Philips Screwdriver

 24mm Spanner(M16)

 10, 13, 17, 19, 24mm Ratchet(M6, M8, M10, M12, M16)

 8mm(Ashai), 5/16(7.95mm(HAPP)) Mini-Socket Wrench – Coin Frame

 Rachet Driver – MSCU Cable Cover

SIMULINE INC..

21

(1) Locating the product at the installation site

Make sure that all of the adjusters are firmly lowered to the floor before starting the work. If not,
the product can move out of place and cause accidens.

This product is equipped with 4 casters and 4 adjusters.

< Fig 7-1a>

① Move the product to the installation location. When installing next to a wall, make sure there is enough

room for loading and unloading.

② Adjust the adjusters so the product is level. When the installation location is decided, lower the adjusters all

the way to the floor. Lower the adjusters until the bottom of the caster is about 4mm from the floor.(Turing a
full circle of spanner makes Adjuster go up by 2 mm. So, after fixing Adjuster, please revolve it with a
spanner two times to two and half times.)

③ When satisfied with the adjustment, refer to Fig 7-1b and tighten the adjuster nut to fix the setting.

F I X N U T

C A S T E R

< Fig 7-1b>

SIMULINE INC..

22

(2) SENSOR installation

① The installment position of SENSOR is as follows. Please install it conferring the following figure.

< Fig 7-2a>

② It will be installed in SIDE FENCE SUPPORTER with four Hex Bolts (M6 x 20L). In installment, the
SENSOR CABLE under the SENSOR must be in advance placed outside through the pipe. Please, be
careful not to be confused with the direction of between the right and the left. The sensor attached with
REFLECTOR should be in the left.

< Fig 7-2b >

SIMULINE INC..

23

(3) SIDE FENCE SUPPORTER installation

SIDE FENCE SUPPORTER can be installed at the side of BASE FRAME with four Hex Bolts (M6 x 20L).
They must be installed at the both right and left sides of BASE FRAME. The upper side of REAR SIDE
SUPPORTER and that of BASE FRAME should be fixed in a parallel way. Three SENSOR Cables must be
connected and inserted inside. At this time, the cables must be connected with the ones with the same tags
so that REAR and RIGHT SENSOR CABLE may not be exchanged. Please remember that when you step
on REAR SIDE SUPPORTOR in the state of REAR SIDE FENCE not installed, it can be damaged.

< Fig 7-3 >

SIMULINE INC..

24