SEA 9711 Hardware Manual
Hardware Manual - Operation Instructions and Safety Guidelines
SEA 9711 WLAN Module
Order No.: 60000009
Doc. No.: HB/SEA 9711 Hardware Manual/2.0.8/Jan/ 16
Content
Getting Started.....................................................................4
Safety Guidelines ................................................................6
Restrictions for Hazardous Locations ............................................7
Restrictions for Hazardous Voltages..............................................7
Operator Protection......................................................................7
Setup & Operation...............................................................9
Prerequisites................................................................................9
Connectors...................................................................................9
Indicators....................................................................................10
Installing the SEA 9711 Module on the Chassis.............................11
Wiring the SEA 9711 Module........................................................12
Installing and Operating Antenna................................................13
Sleep Mode.................................................................................14
Specifications.....................................................................15
WLAN Characteristics...................................................................15
Power Requirements....................................................................15
Physical Characteristics...............................................................17
Environmental Conditions............................................................18
Shock and Vibration....................................................................18
CE Compliance (EMC, R&TTE)........................................................19
FCC Compliance...........................................................................19
Japan Radio Compliance..............................................................20
2 Operation Instructions
Maintenance.......................................................................21
Contact Information ...........................................................22
Operation Instructions 3
Getting Started
Before starting to work with the SEA 9711 WLAN module please read the
following information and the complete software manual and carefully.
We believe that all information in this manual is accurate. The document
has been carefully reviewed for technical accuracy. In the event of technical or typographical errors, we reserve the right to make changes to
subsequent editions of this document without prior notice to holders of
this edition.
The reader should consult the vendor if errors are suspected.
Before using or operating any SEA 9711 module and the provided
software you have to agree to the terms and conditions. If you do
NOT agree you can resend the hardware and software package
within a period of two weeks after delivery. In this case S.E.A. will
refund the product price and shipping costs.
If there are any questions about operating the module or if any
term in this manual is not understood, please contact S.E.A. Datentechnik GmbH before using the module.
The terms and conditions are listed in the software manual which
is provided on the Installation CD ROM. Please read the manual
chapters: Disclaimer, Limitation of Liability, and User Responsib-
ilities before using the device.
4 Operation Instructions
For information about National Instruments™ hardware please
refer to the appropriate National Instruments™ manual.
For information about configuration or programming of the SEA
9711 module, please refer to the software manual.
Operation Instructions 5
Safety Guidelines
Operate the SEA 9711 module only as described in this operation instructions and the module software manual. Please check the S.E.A. website
for updates of this manual or technical specifications.
Hot or Cold
Surface
Operated in hot or cold environments less than 10
°C or higher than 30 °C the metallic surface of the
module might become hot or cold as well.
Touching the surface may result in bodily injury.
Do not dismount the module from the chassis during operation. Wait until the module temperature
has reached 20 °C.
Do not disconnect connectors unless power has been switched
completely off and the area is known to be non hazardous.
Do not remove modules unless power has been switched completely off or the area is known to be non hazardous.
Guarantee void if seal is broken!
Do not open or disassemble the module or other hardware parts.
6 Operation Instructions
Restrictions for Hazardous Locations
The SEA 9711 modules are suitable for use in non hazardous locations
only. Please note:
Do not use for medical applications.
Do not use in safety critical applications.
Keep the system away from hazardous locations, explosive or
high voltage areas.
Protect the system from thunderstorm and lightning strikes or
other electrical hazards.
Restrictions for Hazardous Voltages
Hazardous voltages must not be connected to the SEA 9711 module. A
hazardous voltage is a voltage higher than 33 V
peak
AC or DC to earth
ground. Never connect AC voltages to the module.
Operator Protection
To protect persons against any harm, the following rules have to be followed:
Operation Instructions 7
Loading...