Scientific Atlanta DPC2203 User Manual
Subscriber Networks
Model DPC2203 Cable Modem with Embedded MTA
Description
The DPC2203 Cable Modem (DPC2203) is a high-speed cable modem with
an embedded media terminal adapter (EMTA). The DPC2203 features two
RJ-11 telephone ports for Voice over Internet Protocol (VoIP) service along
with a 10/100BASE-T Ethernet port and a USB 1.1 port for high-speed data
connectivity.
The DPC2203 is designed to meet PacketCable™ 1.5, PacketCable 1.0, and
DOCSIS
®
2.0 specifications as well as being backward compatible with
DOCSIS 1.1 and DOCSIS 1.0 networks. The DPC2203 uses advanced
line-interface technology to provide multi-country, toll-quality, telephone
service using existing in-home wiring. The DPC2203 supports full 5 REN
phone loading on each phone line (10 REN total).
The DPC2203 fully supports the CODECs specified in PacketCabl e 1.5.
Additional CODECs are available through a software upgrade that includes a
high fidelity CODEC option for toll-quality plus service. Standard VoIP call
signaling is compliant with PacketCable’s (MGCP/NCS) specifications.
Software upgrades are available to support Session Initiation Protocol (SIP)
call signaling.
WebWizard
The DPC2203 includes WebWizard, a browser-based graphical user interface.
WebWizard is a powerful tool that facilitates installation and troubleshooting by
eliminating the need to load setup software on the customer premises equipment (CPE).
Features
• Cable modem with an Embedded MTA that provides two lines of voice services
• Toll-quality, high-compression, and high-fidelity (exceeding toll quality) CODEC
options
• IPsec and AES-128 encryption options
• Attractive compact design and versatile orientation to stand vertically, lie flat on the
desktop, or mount easily on the wall
• Front panel LEDs provide visual feedback of real-time data transmission and cable
modem status
• Bridged 10/100BASE-T auto-sensing/auto-MDIX Ethernet port and USB 1.1 data port
• Battery backup housing (optional models only) allows standby powering on loss of
AC power
• 2200 mAh Li-Ion battery cartridge provides up to 8 hours of battery backup operation
per cartridge
1
Description continued next page
1
and after fully charging the battery. Due to variations in individual units, the actual initial standby time can vary +/- 10%. Other factors can also
influence battery standby power times such as CPE data activity, variations in DOCSIS traffic, telephone port activity, battery aging, and
temperature.
The listed battery backup time (8 hours) is the nominal initial time that the battery pack can provide standby power after loss of AC power
Model DPC2203 Cable Modem with Embedded MTA
Description, continued
Battery Backup (Optional)
The DPC2203 can be ordered with or without the capability to provide battery backup
powering. Units with battery backup capability are available in housings that have either
one or two battery bays. Each bay holds a single, user replaceable, rechargeable Li-Ion
battery cartridge that provides backup power in the event of an AC power failure.
Models Available
Non-battery enclosure
“C” enclosure
Support for one battery cartridge
“C2” enclosure
Support for two battery cartridges
2
Model DPC2203 Cable Modem with Embedded MTA
Ordering Information
Contact your Sales Representative for product availability in your area.
Description
“C” housing with one (1) battery bay
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Battery backup housing (1 battery bay, bottom loaded)
• 120 VAC / 60 Hz, 15 VDC / 1A Class 2 desktop linear power supply with
attached power cord for North America
• No battery included (battery ordered separately)
• Ethernet and USB cables
• CD-ROM containing user’s guide and USB drivers
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Battery backup housing (1 battery bay, bottom loaded)
• 100-120 VAC / 50-60 Hz, 15 VDC / 1A desktop linear-switching power supply
with attached power cord for North America
• No battery included (battery ordered separately)
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Battery backup housing (1 battery bay, bottom loaded)
• 120 VAC / 60 Hz, 15 VDC / 1A Class 2 desktop linear power supply with
attached power cord for North America
• No battery included (battery ordered separately)
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
Customer Specific Configuration
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Battery backup housing (1 battery bay, bottom loaded)
• 100-120 VAC / 50-60 Hz, 15 VDC / 1A desktop linear-switching power supply
with attached power cord for North America
• No battery included (battery ordered separately)
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
Customer Specific Configuration
Part Number
4016431
4024178
4013087
4024179
3
Model DPC2203 Cable Modem with Embedded MTA
Ordering Information, continued
Description, continued
“C” housing with one (1) battery bay
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Extended flash memory option
• Battery backup housing (1 battery bay, bottom loaded)
• 120 VAC / 60 Hz, 15 VDC / 1A Class 2 desktop linear power supply with
attached power cord for North America
• No battery included (battery ordered separately)
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
Customer Specific Configuration
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Extended flash memory option
• Battery backup housing (1 battery bay, bottom loaded)
• 100-120 VAC / 50-60 Hz, 15 VDC / 1A desktop linear-switching power supply
with attached power cord for North America
• No battery included (battery ordered separately)
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
Customer Specific Configuration
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Battery backup housing (1 battery bay, bottom loaded)
• 120 VAC / 60 Hz, 15 VDC / 1A Class 2 desktop linear power supply with
attached power cord for North America
• One (1) 2200 mAh Li-Ion battery
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Battery backup housing (1 battery bay, bottom loaded)
• 100-120 VAC / 50-60 Hz, 15 VDC / 1A desktop linear-switching power supply
with attached power cord for North America
• One (1) 2200 mAh Li-Ion battery
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
Part Number
4025728
4025729
4016432
4024176
4
Model DPC2203 Cable Modem with Embedded MTA
Ordering Information, continued
Description, continued
“C” housing with one (1) battery bay
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Battery backup housing (1 battery bay, bottom loaded)
• 120 VAC / 60 Hz, 15 VDC / 1A Class 2 desktop linear power supply with
attached power cord for North America
• One (1) 2200 mAh Li-Ion battery
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
Customer Specific Configuration
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Battery backup housing (1 battery bay, bottom loaded)
• 100-120 VAC / 50-60 Hz, 15 VDC / 1A desktop linear-switching power supply
with attached power cord for North America
• One (1) 2200 mAh Li-Ion battery
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
Customer Specific Configuration
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Extended flash memory option
• Battery backup housing (1 battery bay, bottom loaded)
• 120 VAC / 60 Hz, 15 VDC / 1A Class 2 desktop linear power supply with
attached power cord for North America
• One (1) 2200 mAh Li-Ion battery
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
Customer Specific Configuration
2-Line VoIP Cable Modem with EMTA for NTSC markets. Includes:
• PacketCable 1.0 / DOCSIS 2.0
• Extended flash memory option
• Battery backup housing (1 battery bay, bottom loaded)
• 100-120 VAC / 50-60 Hz, 15 VDC / 1A desktop linear-switching power supply
with attached power cord for North America
• One (1) 2200 mAh Li-Ion battery
• Ethernet and USB cables
• CD-ROM containing user guide and USB drivers
Customer Specific Configuration
Part Number
4013088
4025381
4025730
4025731
5
Loading...