Scientific Atlanta AT8550 User Manual

Page 1

FCC Compliance

United States FCC Compliance

Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the cable company or an experienced radio/television technician for help.

Any changes or modifications not expressly approved by Scientific-Atlanta could void the user’s authority to operate the equipment.

The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the FCC and is intended to supply you with information regarding the FCC approval of this device. The phone numbers listed are

for FCC-related questions only and not intended for questions regarding the connection or operation for this device. Please contact your cable service provider for any questions you may have regarding the operation or installation

of this device.

AT8550™ AllTouch

Remote Control Rev C

User’s Guide

Device Program Codes

If you program codes to control devices, record your codes here:

CBL: _____________________

TV:_______________________

VCR: _____________________

DVD: _____________________

AT8550™ AllTouch

Remote Control Rev C

User’s Guide

FCC Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1) the device may not cause harmful interference, and 2) the device must accept any interference received, including interference that may cause undesired operation.

AT8550 AllTouch Remote Control Rev C

Scientific-Atlanta, Inc.

5030 Sugarloaf Parkway

Lawrenceville, Georgia 30044 USA

Telephone: 770-236-1077

Canada EMI Regulation

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada.

AUX: _____________________

AllTouch, Explorer, Scientific-Atlanta, and the Scientific-Atlanta logo are registered trademarks of Scientific-Atlanta, Inc. 8000 and AT8550 are trademarks of Scientific-Atlanta, Inc. All other trademarks shown are trademarks of their respective owners. Product and service availability subject to change without notice.

Scientific-Atlanta, Inc. 5030 Sugarloaf Parkway P.O. Box 465447 Lawrenceville, GA 30042

www.scientificatlanta.com

PIP

Page 2

In This Guide

Welcome to the Ultimate Control Experience! .................................................................................3

Important Information About Your Remote.......................................................................................3

How Does a Universal Remote Control Work?................................................................................3

Where Do I Start? ............................................................................................................................3

Quick Reference ..............................................................................................................................4

What Devices Can I Control?...........................................................................................................6

What Devices Do I Want to Control? ...............................................................................................6

Reassign Mode Keys .......................................................................................................................6

Program the Remote to Control My Devices ...................................................................................7

What If None of the Codes Work? ...................................................................................................8

Which Code Worked? ......................................................................................................................9

Change Power Control...................................................................................................................10

Change Volume Control.................................................................................................................12

Change Channel Control ...............................................................................................................13

Change VCR/VOD Programming...................................................................................................14

Put It Back the Way I Got It............................................................................................................15

Code Tables ...................................................................................................................................16

FCC Compliance............................................................................................................................20

VCR Codes

Ricoh 2034 Runco 2028 Samsung 2004, 2009, 2011,

Sansui 2006, 2031, 2033,

Sanyo 2007, 2009, 2016,

Scott 2008, 2011, 2026 Sears 2007, 2010, 2014,

Sharp 2019, 2027, 2035,

Shintom 2023, 2024 Signature 2035, 2047 Singer 2014, 2024, 2034 Sony 2003, 2181, 2211,

STS 2014, 2029 Sylvania 2000, 2014, 2015,

Symphonic 2017, 2213 Tandy 2007 Tashiko 2010 Tatung 2031 Teac 2017, 2031 Technics 2014 Teknika 2010, 2014, 2017 Toshiba 2011, 2020, 202 2 ,

Totevision 2009, 2010 Unitech 2009 Vector Research 2005, 2006, 2011,

Video Concepts 2005, 2006, 2011,

Wards 2000, 2009, 2010,

White 2213 Westinghouse

XR-1000 2014, 2017, 2024 Y amaha 2005, 2006, 2007,

Zenith 2028, 2034, 2043

2041

2212

2042

2016, 2020, 2021, 2022, 2023, 2029

2045, 2047

2214

2017, 2026, 2182

2026, 2032

2012

2012, 2032

2011, 2014, 2016, 2017, 2019, 2022, 2023, 2024, 2027, 2029, 2035, 2047

2013, 2031

DVD Group: DVD and CD Devices

CD Codes

ADC 2166 Aiwa 2151 Akai 2167 Emerson 2152 Fisher 2153 GE 2169 Hitachi 2154 JVC 2155 Kenwood 2156 Marantz 2158 Mitsubishi 2170 Nakamichi 2172

CD Codes

NEC 2157 Onkyo 2159 Panasonic 2160 Pioneer 2161 RCA 2162 Sanyo 2175 Sears 2168 Sherwood 2173 Sony 2163 Teac 2174 Technics 2164 Toshiba 2171 Yamaha 2165

DVD Codes

Aiwa 2057, 2070 Alpine 2071 Apex 2068, 2069, 2072,

Audiovox 2204 Bose 2140 Broksonic 2074, 2148 Clarion 2075 Classic 2076 Daewoo 2077 Denon 2078, 2079, 2080,

Emerson 2082, 2083 Fisher 2084 Funai 2083 GE 2048, 2085*, 2086 Go Video 2141, 2147 GPX 2087 Hitachi 2056, 2088, 2089,

JVC 2050, 2058, 2092,

Kenwood 2093 Konka 2059, 2060 Koss 2206 Lasonic 2197 Magnavox 2051, 2094, 2195 Memorex 2095 Mintek 2096 Mitsubishi 2052 NAD 2082 Nakamichi 2097 Norcent 2098, 2099 Onkyo 2100 Oritron 2114 Panasonic 2061, 2101, 2102,

Philips 2051, 2067, 2107 Pioneer 2053, 2108, 2109,

Proscan 2048, 2112 Qwestar 2113, 2114 RCA 2048, 2049*, 2115,

Sampo 2116 Samsung 2117, 2118, 2119,

2073, 2199, 2205

2081

2090, 2091

2142

2103, 2104, 2105, 2106, 2080, 2200

2110, 2111

2143, 2149, 2202, 2203

2144

DVD Codes

Sharp 2122, 2123, 2198 Sherwood 2124 Sony 2054, 2063, 2064,

Sylvania 2083, 2201 Tea c 2130 Technics 2131 Techwood 2132 Toshiba 2055, 2065, 2133,

Y amaha 2136, 2137, 2138 Zenith 2066, 2139, 2146

2125, 2126, 2127, 2128, 2129

2134, 2135, 2150, 2207

*Use PLAY when testing this

code.

AUX Group: Receivers, Tuners, Home Theatre in a Box (HTIB)

Non-Responsive Mode 3254

Receiver/Tuner Codes

Aiwa 3000, 3001, 30 02 ,

Bose 3033, 3034 Carver 3000 Denon 3035 Harman Kardon 3000, 3013 JBL 3013 JVC 3005 Kenwood 3006 Linn 3000 Maganvox 3000 Marantz 3000 Onkyo 3015 Panasonic 3016, 3017 Philips 3000 Pioneer 3012** RCA 3007, 3022,

Sansui 3000 Sherwood 3019 Sony 3008, 3009, 3018 Technics 3016, 3017 Wards 3000, 3012** Yamaha 3010, 3011, 3012**

3003, 3004, 3014, 3020

3023, 3032

** Use or when testing this code.

Home Theatre in a Box Codes

Bose 3033 JBL 3027 JVC 3028 Koss 3026 Onkyo 3029 Panasonic 3030 Philips 3025 Pioneer 3031 RCA 3024 Sony 3021

Page 3

TV Codes

Soundesign 1004, 1006, 1008,

Starlite 1034 Sylvania 1000, 1004, 1006,

Symphonic 1029, 1034, 1150 Tandy 1139 Tatung 1003 Technics 1045 Techwood 1004, 1006, 1045 Teknika 1000, 1001, 1004,

Telecaption 1097 Toshiba 1042, 1060, 1061,

Totevision 1137 Universal 10 44, 1072 Vidikron 1000 Wards 1000, 1001, 1004,

Y amaha 1004, 1005, 1006,

Zenith 1001, 1004, 1122,

1034, 1040

1008, 1017, 1057, 1058, 1063, 1064, 1065, 1073, 1096, 1131, 1189

1005, 1006, 1008, 1010, 1011, 1012, 1014, 1034, 1040, 1064, 1087, 1136, 1137, 1162

1062, 1087, 1091, 1097, 1098, 1130, 1131, 1183

1005, 1006, 1017, 1020, 1029, 1040, 1044, 1053, 1057, 1058, 1063, 1064, 1072, 1073, 1079, 1099

1017

1123, 1124, 1125, 1158

HDTV Codes

Daewoo 1223 Hitachi 1193, 1236 JVC 1175, 1194 Mitsubishi 1195, 1206, 1207,

Panasonic 1179, 1192, 1203,

Philips 1201, 1212 Pioneer 1216, 1218, 1234 RCA 1198, 1202, 1215 Sampo 1220 Samsung 1178, 1232 Sharp 1197 Sony 1174, 1176, 1177,

Thomson 1171 Toshiba 1172, 1173 Zenith 1225, 1233, 1235

1208, 1209

1211, 1221

1226, 1227, 1229, 1231

VCR Group: VCR and DVR Devices

DVR Codes

Dish Network 2186 Echostar 2037

Philips 2036, 2185, 2187 ReplayTV 2178, 2188, 2192 Sony 2189 TiVo 2177 Toshiba 2190 Zenith 2191

VCR Codes

Non-Responsive Mode 2254

Admiral 2035, 2047 Aiko 2018 Aiwa 2017 Akai 2002, 2004, 2031,

Audiovox 2010 Bell & Howell 2007 Broksonic 2008, 2179 Calix 2010 Canon 2014, 201 5 Capehart 2030 Carver 2000 CCE 2018, 2024 Citizen 2009, 2010, 2011,

Colortyme 2005 Craig 2009, 2010, 2016,

Curtis Mathes 2005, 2009, 2012,

Daewoo 2011, 2017, 2018,

Daytron 2030 Dimensia 2025, 2046 Electrohome 2010, 2019 Emerson 2002, 2008, 2010,

Fisher 2007, 2016, 2020,

Fuji 2014 Funai 2017, 2213 Garrard 2017 GE 2001, 2009, 2014,

Go Video 2038, 2044, 2184 Goldstar 2005, 2010, 2013 Gradiente 2017 Harman Kardon 2000, 2005 Harwood 2024 Hitachi 2022, 2023, 2029,

JC Penney 2005, 2006, 2007,

Jensen 2022, 2023, 2031

2032

2012, 2013, 2018, 2045

2024

2013, 2014, 2015, 2025, 2046

2030, 2045

2011, 2014, 2017, 2019, 2026, 2032

2021

2015, 2025, 2046

2031

2008, 2009, 2010, 2014, 2015, 2022, 2023, 2024, 2029

VCR Codes

JVC 2005, 2006, 2007,

Kenwood 2005, 2006, 2007,

KLH 2024 Kodak 2010, 2014 LG 2010 Logik 2024 LXI 2010 Magnavox 2000, 2014, 2015,

Marantz 2000, 2005, 2006,

Matsushita 2014 Memorex 2007, 2009, 2010,

MGA 2019, 2026, 2032 Minolta 2022, 2023, 2029 Mitsubishi 2019, 2022, 2023,

Montgomery 2035, 2047 Ward

Motorola 2014, 2035, 2047 MTC 2009 Multitech 2009, 2012, 2017,

NEC 2005, 2006, 2007,

Nikko 2010 Noblex 2009 Olympus 2014 Optimus 2010, 2035, 2047 Optonica 2027 Orion 2212 Panasonic 2014, 2015, 2180 Pentax 2012, 2022, 2023,

Pentex 2013 Research

Philco 2014, 2015 Philips 2000, 2014, 2027,

Pioneer 2006, 2022, 2033 Portland 2012, 2030, 2045 Proscan 2001, 2025, 2046 Quasar 2014, 2015 Radio Shack 2010, 2027, 2047 Radio Shack/ 2007, 2009, 2010,

Realistic 2014, 2015, 2016,

Radix 2010 RCA 2001, 2002, 2009,

Realistic 2007, 2009, 2010,

2013, 2031, 2033, 2039

2012, 2013, 2031, 2033

2028

2007, 2012, 2013, 2014

2014, 2016, 2017, 2028, 2035, 2047, 2212

2026, 2032, 2033

2024

2012, 2013, 2031, 2033

2029

2176

2017, 2019, 2020, 2021, 2027, 2035

2014, 2022, 2023, 2025, 2029, 2040, 2046, 2183

2011, 2014, 2015, 2016, 2017, 2019, 2020, 2021, 2027, 2035, 2047

Welcome to the Ultimate Control Experience!

Your new AT8550™ AllT ouch® Universal Remote Control (remote) is a true universal remote, functioning as five remotes in one. As one example, you can use this remote to operate your TV, VCR, DVD player, cable box, and receiver.

Important Information About Your Remote

Your remote is initially programmed to only operate your cable box. The Volume and Mute keys will not work until a TV code is programmed into the remote. You must program the remote to operate your TV, VCR, etc. See Program the Remote to Control My Devices to learn how to enter device codes and program your remote.

How Does A Universal Remote Control Work?

You tell the remote which type of device you want to operate using the five keys arched across the top of the remote. These keys, known as mode keys, are labeled CBL, TV, VCR, DVD, and AUX. Each mode key is associated with a specific device. As an example, if you want the remote to operate your TV, you simply press the TV key. Other keys you press on the remote thereafter should operate your TV. Want to switch the remote to operate a different device? Just press the mode key for the next device you want to operate. In this guide, you will learn which types of devices you can control and how to program the remote to control your specific devices.

Note: Some remote keys may not operate in all modes. You can even program your remote to assign specific functions, such as channel control, to operate one device only. You will learn more about these advanced functions later in this guide.

Where Do I Start?

Before you begin using your remote, complete the following initial setup tasks.

Install the Batteries

The remote requires two AA batteries (alkaline recommended). A diagram in the battery compartment of the remote indicates proper placement of the batteries. When batteries are properly installed, the light on the remote blinks each time a key is pressed.

Visit the Quick Reference

Timing is often important when you program advanced features. Therefore, knowing where certain keys are on the remote gives you an edge in pressing the right key at the right time.

Important Information About Power Control

Scientific-Atlanta strongly recommends that you turn off your cable box every time you turn off your TV. To make this easier, you can program your remote to turn both devices on or off at the same time. After you program the remote to control your four favorite entertainment devices, see Change Power Control to learn more about programming your remote to control power for the TV and cable box at the same time.

Find a Place to Store Your Remote

Keeping up with one remote is much easier than keeping up with five remotes. However, it is still a good idea to find a storage location for your remote. The AT8550 is not a toy. It should be kept out of the reach of children under the age of 6 years.

Page 4

Quick Reference

Device Control

Viewing and

Browsing Control

Sound Control

DVR Control

DVD/VCR/VOD

Control

Numeric Keys

PIP Control

Video Source

T11373

Device Control

Powers on or off Controls AUX functions Controls DVD functions Controls VCR functions

Controls TV functions

Controls Cable mode functions

PIP

Viewing and Browsing Control

Displays the program guide

Displays the Applications Menu or DVD Menu

Displays channel and program information

Navigates through the program guide by days

Moves through selections

Selects and deselects screen item

Navigates through settings, program guide, or DVD chapters

Displays the General Settings or Quick Settings menus

Exits settings, menus, and

guides

Selects options in menus and the program guide

Selects channel, up or down

Views favorite channels

Returns to last channel

Sound Control

Adjusts volume

Mutes sound

Note: These keys will not work until you program a TV code into the remote.

TV Group: TVs and HDTVs

TV Codes

Non-Responsive Mode 1254

Admiral 1001, 1139, 1159 Aiko 1014 Akai 1002 Amtron 1034 Anam National 1003, 1034 AOC 1004, 1005, 1006,

Apex 1180, 1184, 1186 Audiovox 1034 Bell & Howell 1001, 1042, 1062 Broksonic 1181, 1187 Carver 1000 Celebrity 1002 Citizen 1004, 1006, 1008,

Colortyme 1004, 1006, 1009 Contec/Cony 1010, 1011, 1012,

Craig 1034 Crosley 1000 Crown 1034 Curtis Mathes 1000, 1004, 1006,

Daewoo 1004, 1005, 1006,

Daytron 1004, 1006, 1137 Dimensia 1053 Dumont 1004, 1122 Electroband 1002 Electrohome 1002, 1003, 1004,

Emerson 1004, 1006, 1010,

Envision 1004, 1006 Fisher 1041, 1042, 1043,

Fujitsu 1040 Funai 1034, 1040 Gateway 1237 GE 1003, 1004, 1006,

Goldstar 1004, 1005, 1006,

Hallmark 1004, 1006

1007, 1140, 1141, 1153

1014, 1034, 1062, 1087, 1137, 1160

1034

1013, 1042, 1053, 1062, 1087, 1137, 1160, 1167

1014, 1015, 1016, 1103, 1137, 1151

1006, 1017, 1018

1019, 1020, 1021, 1022, 1023, 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031, 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039, 1040, 1042, 1062, 1101, 1137, 1142, 1143, 1152, 1168

1062, 1144

1018, 1044, 1045, 1046, 1053, 1072, 1132, 1133, 1134, 1145, 1161

1010, 1017, 1047, 1048, 1049, 1126, 1127, 1137, 1138

TV Codes

Hitachi 1004, 1006, 1010,

Infinity 1000 JBL 1000 JC Penney 1004, 1005, 1006,

Jensen 1004, 1006 JVC 1010, 1011, 1012,

Kawasho 1002, 1004, 1006 Kenwood 1004, 1006, 1017 Kloss Novabeam 1034, 1057, 1058 KTV 1034, 1059, 1137,

LG 1005 Logik 1001 Luxman 1004, 1006 LXI 1000, 1006, 1042,

Magnavox 1000, 1004, 1006,

Majestic 1001 Marantz 1000, 1004, 1006,

Megatron 1006, 1050 Memorex 1001, 1005, 1006,

MGA 1004, 1005, 1006,

Mitsubishi 1004, 1005, 1006,

Montgomery 1001 Ward

Motorola 1003, 1139 MTC 1004, 1005, 1006,

Multitech 1034 Multivision 1070 NAD 1006, 1060, 1061,

NEC 1003, 1004, 1005,

Nikko 1006, 1014 Onwa 1034 Optimus 1147, 1166

1011, 1012, 1050, 1051, 1052, 1109, 1110, 1111, 1112, 1113, 1114, 1115, 1116, 1117, 1118, 1119, 1120, 1121, 1143, 1154, 1166, 1169

1008, 1011, 1018, 1044, 1045, 1048, 1049, 1053, 1061, 1072, 1086, 1087, 1104, 1137, 1138, 1145

1045, 1051, 1054, 1055, 1056, 1128, 1129, 1146, 1168

1142

1053, 1060, 1061, 1062, 1145

1008, 1017, 1057, 1058, 1063, 1064, 1065, 1073, 1106, 1107, 1108

1050, 1066

1042, 1062

1017, 1018, 1043, 1067, 1068

1017, 1018, 1043, 1067, 1068, 1069, 1102

1087

1147, 1166

1006, 1009

TV Codes

Optonica 1079, 1139 Orion 1031, 1152 Panasonic 1003, 1045, 1136,

Philco 1000, 1003, 1004,

Philips 1000, 1003, 1004,

Pioneer 1004, 1006, 1075,

Portland 1004, 1005, 1006,

Price Club 1087 Prism 1045 Proscan 1053, 1145 Proton 1004, 1006, 1010,

Quasar 1003, 1045, 1059,

Radio Shack 1042, 1062 Radio Shack/ 1004, 1006, 1010,

Realistic 1034, 1042, 1053,

RCA 1003, 1004, 1005,

Realistic 1042, 1062 Runco 1122 Sampo 1004, 1006, 1137,

Samsung 1004, 1005, 1006,

Sansui 1152, 1185 Sanyo 1004, 1041, 1042,

Scott 1004, 1006, 1010,

Sears 1000, 1004, 1006,

Sharp 1004, 1006, 1010,

Signature 1001 Sony 1002, 1157, 1164,

1162, 1188, 1238

1005, 1006, 1008, 1010, 1017, 1057, 1058, 1063, 1065

1008, 1010, 1017, 1057, 1058, 1063, 1071, 1072, 1073, 1074

1076, 1143, 1147, 1166

1014, 1137

1077

1078, 1162

1062, 1079, 1137, 1138

1006, 1007, 1017, 1053, 1080, 1081, 1082, 1083, 1084, 1085, 1105, 1143, 1145, 1148, 1149, 1151, 1155, 1163, 1167, 1170, 1182, 1190

1138, 1191

1010, 1013, 1017, 1086, 1087, 1088, 1137, 1138, 1156

1062, 1068, 1089, 1090, 1135, 1144

1020, 1031, 1034, 1040

1011, 1012, 1017, 1040, 1041, 1042, 1043, 1053, 1055, 1060, 1061, 1062, 1091, 1092, 1144, 1145, 1150

1022, 1025, 1079, 1093, 1094, 1095, 1100, 1137, 1139

1165

Page 5

Code Tables

If the remote does not recognize your device, you can find codes for your device by brand. With combination devices (such as a TV with a built-in DVD player), you have separate codes for each device component. Therefore, for ease of use, the combination device codes are listed first. All other code tables are organized by devices assigned to each mode (CBL, TV, VCR, DVD, AUX).

Combination Device Codes

If you have a combination device, you may need to reassign the AUX key to operate one of the devices. See Reassign Mode Keys for more information. The following tables provide some examples of combination devices. If your combination device is not listed, simply look for the codes for each separate device.

CBL/DVD Combo Codes

Brand CBL DVD Model

Scientific-Atlanta 0000 2209 Explorer 8xxx (56.9kHz) Scientific-Atlanta 0004 2210 Explorer 8xxx (36.7kHz)

DVD/VCR Combo Codes Tuner/CD Combo Codes

Brand DVD AU X ( VCR) Model Brand Tuner/CD

Go Video 2141 2038 DVR5000 Bose 3084 Go Video 2147 2044 DVR4200 JVC 2142 2039 HRXVC1U RCA 2143 2040 VC125HF Samsung 2144 2041 DVD-V2000 Sanyo 2145 2042 DVW5000 Zenith 2146 2043 XBV243

TV/DVD Combo Codes TV/DVD/VCR Combo Codes

Brand TV DVD Model Brand TV DVD VCR

Broksonic 1181 2148 SC975 Panasonic 1188 2200 2180 RCA 1182 2149 BD20TF10 RCA 1190 2202 2183 Sansui 1185 2196 — Sylvania 1189 2201 2182 Toshiba 1183 2150 MD20FL3

DVR Control

Replays the previous few seconds of a program

Displays a list of programs that you have recorded, so that you can select one for viewing

Displays live television programming

DVD/VCR/VOD Control

Notes:

• In DVD mode, these keys control

your DVD or VCR.

• These keys also control DVR functions.

Rewinds DVD/VCR/VOD Plays DVD/VCR/VOD Fast forwards DVD/VCR/VOD Stops DVD/VCR/VOD Pauses DVD/VCR/VOD Records program

PIP Control

Opens or closes the Picturein-Picture (PIP) window

Swaps the contents of the PIP window and the main viewing screen so that the PIP window displays on the main screen

Moves the PIP window to another location on the screen

Selects the channels in the PIP window, up or down, and scrolls through DVD chapters

Video Source

Selects the video input source in TV mode or selects RF Bypass in CBL mode (where available)

Other Device Codes

CBL Group: Cable, HDTV Tuner, and Satellite Devices

Cable Codes

Scientific-Atlanta 0000, 0001, 0002, 0003,

ABC 0010 GE 0010 Gemini 0011 General Instruments 0010 Hitachi 0010 Jerrold 0010, 0011 Motorola 0007, 0008 Pioneer 0009 Proscan 0010 Signature 0010 Starcom 0011 Stargate 0011

0004, 0005

HDTV Tuner Codes

Panasonic 0021 Philips 0022 RCA 0017

Satellite Device Codes

Dish Network 0016 Dishnet 0013 Echostar 0014 GE 0012 Hughes 0015 Philips 0023 Proscan 0012 RCA 0012 Sony 0019, 0020 Zenith 0024

Numeric Keys

Enters channel numbers and remote codes (also enters your parental control PIN)

Reserved for future use

Sizes the picture for some high-definition television (HDTV) models

Page 6

What Devices Can I Control?

The mode keys arched across the top of the remote tell the remote which device you want to operate.

Each mode key is associated with different groups of devices. You can use each mode key to control one of its associated devices:

Mode Key Associated Devices

CBL..........cable boxes, HDTV tuners, and satellite

devices

TV.............TVs and HDTVs

VCR ......... VCRs, digital video recorders (DVRs), DVD players, and CD players

DVD..........DVD players, CD players, VCRs, and DVRs

AUX..........receivers, tuners, and Home Theatre in a Box (HTIB)

T11208

Regarding Non-Responsive Modes

The AT8550 is pre-programmed with the TV, VCR, and AUX keys set to an inactive (non-responsive) mode. After you program these keys on the remote control, you can return them to the non-responsive mode by using the specific non-responsive mode code found in the Code T ables, later in this guide.

What Devices Do I Want to Control?

To help you keep track of the devices you want to control, list the type of devices (including brand) in the following table. Locate your device type in the list above and write the associated mode key. If you have two devices that use the same key, you must reassign the AUX, the VCR, or the DVD keys. Go to Reassign Mode Keys . Otherwise, go to Program the Remote to Control My Devices.

eciveDeciveD

eciveDeciveDyeKedoMyeKedoM

eciveD

ynoSDVD:elpmaxEDVDhtineZRCV:elpmaxERCV

.1.4

.2.5 .3

yeKedoMyeKedoMeciveDeciveD

yeKedoM

eciveDeciveDyeKedoMyeKedoM

eciveD

yeKedoMyeKedoM

KedoM

Reassign Mode Keys

With the AT8550, you can reassign a mode key to operate a different device. For example, you can reassign the AUX key to operate a receiver, a tuner, or a Home Theatre in a Box system.

You can reassign the AUX key, the VCR key, or the DVD key. However, the TV key and the CBL key cannot be reassigned. If you reassign a key, be sure you update the table found in the previous section.

Put It Back the Way I Got It

Return specific advanced functions or all advanced functions back to their original settings. Choose the procedure that fits your needs.

Important: Your cable service provider may have programmed the dual power control feature for your convenience. Therefore, if you reset the power control, you may need to program the remote to control the power for the cable box and TV at the same time.

Resetting Mode Keys (Program Code 9 9 2)

You can reprogram the VCR key and the AUX key to operate in their original modes.

1. Press and hold CBL and SELECT until all mode keys blink twice.

2. Press 9 9 2. The CBL key blinks twice.

3. Do one of the following:

• If you are returning the VCR key to its original state, press VCR twice.

• If you are returning the AUX key to its original state, press AUX twice. Result: All mode keys blink three times.

4. Repeat this procedure if you want to return both keys to their original modes.

Resetting Device Codes and Mode Keys (Program Code 9 7 7)

Follow this procedure to return programmed device codes and mode keys to their original settings. This procedure erases device codes you programmed. In addition, this procedure returns all reassigned mode keys to their original operation.

This reset procedure does not reset any changes you made to power, volume, or channel control.

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 7 7. All mode keys blink three times. Then, after a few seconds the CBL key

blinks twice.

Resetting Power, Volume, and Channel Control (Program Code 9 8 0)

Follow this procedure to return power, volume, and channel control to their original settings. This reset procedure does not reset any device codes you programmed or affect mode key reassignments.

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 8 0. All mode keys blink three times.

Resetting All Changes (Program Code 9 8 1)

Follow this procedure to return the remote completely back to its original settings.

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 8 1. All mode keys blink three times. Then, after a few seconds the CBL key

blinks twice.

Page 7

Change VCR/VOD Programming

Your remote is originally programmed in one of the following ways:

• The Rewind, Play, Fast Forward, Stop, Pause, and Record keys (the transport keys) are programmed, by default, to transmit the codes for the Explorer® 8000™ series Home Entertainment Server video-on-demand (VOD) or digital video recorder (DVR) functions when in Cable (CBL) mode.

• The transport keys control different devices, depending on the mode key you press.

You can choose to override the default settings for the transport keys so that the transport keys operate a different device when you have selected CBL mode.

Try your remote to see how the transport keys currently work. If you want to change the settings for the transport keys, complete the procedure that fits your needs.

Changing VCR/VOD Programming (Program Code 9 9 9)

1. Press and hold CBL and SELECT until all mode keys blink twice.

2. Press 9 9 9. The CBL key blinks twice.

3. Press the mode key (VCR or DVD) associated with the device you want the transport keys to now control. All mode keys blink three times.

Results:

• The transport keys now always control the device associated with the mode you selected in this procedure (DVD or VCR).

• Pressing PLAY starts the VCR, the DVD, or the device that has been reassigned to AUX.

• In AUX mode, the remote always controls channels for the device assigned to the AUXkey .

Restoring Default VCR/VOD Settings (Program Code 9 9 9)

1. Press and hold CBL and SELECT until all mode keys blink twice.

2. Press 9 9 9. The CBL key blinks twice.

3. Press CBL. All mode keys blink three times.

Result: The transport keys are restored to their default settings. Example: Pressing PLAY in CBL mode starts the DVR.

Reassigning Mode Keys (Program Code 9 9 2)

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 9 2. The CBL mode key blinks twice.

3. Press the mode key associated with the type of device you want to control, and then press the mode key that you want to change. All mode keys blink three times.

Some Common Examples

• To program the AUX key to operate your VCR, press VCR and then AUX.

• To program the VCR key to operate your TV, press TV and then VCR.

4. When finished, go to Program the Remote to Control My Devices.

Program the Remote to Control My Devices

Your remote is initially programmed to only operate your cable box. The Volume and Mute keys will not work until a TV code is programmed into the remote. If the remote provides only limited functionality for a device, you can look for a code that provides more functionality. Before you begin, make sure you know the brand name of the device you want to control.

Note: Some remote keys may be assigned to operate one device type only. For example, volume control may be assigned to the TV only. If this is the case, you can reprogram power, volume, and channel control using procedures later in this guide.

Assigning a Different Device Code to a Mode Key

1. Find the codes for your brand of device in the appropriate setup code list at the end of this guide. For example, look under TV Group if you need to program the remote to operate your TV.

2. Turn on your device.

3. Press and hold SELECT and the appropriate mode key until all of the mode keys blink twice. For example, to set up the TV, press and hold SELECT and TV. Note: If you reassigned mode keys, you may, for example, press SELECT and VCR to program the VCR mode key with a TV code.

4. Enter the first setup code for the device. All mode keys blink twice to indicate that the code entry was accepted.

5. Point the remote at the device, and press POWER, PLAY , or to test the device.

6. Did the device operate correctly?

• If yes, write down the code that worked on the cover of this guide.

You may need it again if the device code is accidentally erased.

• If no, repeat these steps using a different setup code.

Note: If none of the codes listed for your brand of device operate the device correctly, go to What If None of the Codes Work for instructions.

7. Repeat this procedure for each mode key you want to program.

Page 8

What If None of the Codes Work?

If none of the codes listed for your brand of device operate the device correctly, you can search through the code library for a valid code.

Improving Your Reaction Time

When you search the code library, you need to be ready to press SELECT as soon as the remote turns off your device. Therefore, make sure you are familiar with the location of the SELECT key before you begin this procedure.

Sizing Up the Libraries

The mode keys blink twice when the remote reaches the last code in a library. You do not need to count codes. However, knowing the size of each library will help you determine how long it will take to cycle through all of the codes in the library. Each library contains the following number of codes:

• CBL mode: 23 • TV mode: 225 • DVD mode: 206

• VCR mode: 210 • AUX mode: 38

Searching the Code Library (Program Code 9 9 1)

1. Turn on the device.

2. Press and hold SELECT and the appropriate mode key (CBL, TV, VCR, DVD, or AUX) until the mode keys blink twice. For example, to search for a TV code, press and hold SELECT and TV at the same time.

Note: If you reassigned mode keys, you may, for example, press SELECT and VCR to search for a TV code to assign to the VCR mode key.

3. Press 9 9 1. The mode key you selected in step 2 blinks twice.

4. Point the remote toward the device, and press PLAY . The remote automati- cally tests each code in its library, beginning with the most common codes. The mode key blinks once each time the remote transmits a new code. The mode key blinks twice when it reaches the last code.

5. As soon as the device powers off, press SELECT.

6. Verify the new code is correct by pressing POWER.

7. Did the device power on again?

• If yes, press SELECT to assign the code.

• If no, complete the following steps:

a) Turn the device on. b) Press or to step forward or back to the correct code. c) When the device turns off, press SELECT to assign the code.

8. Go to Which Code Worked to identify the code that controls your device. After you identify the code, record the code in the space provided on the cover of this guide.

Change Channel Control

Your remote is originally programmed in one of the following ways:

• The remote controls channels for a single device, such as the cable box, whether the remote is in CBL, VCR, DVD, or TV mode. The AUX mode always retains separate channel control.

• The remote controls channels for different devices, depending on the mode key you press.

Try your remote to see how the channel control currently works. The channel keys include complete the procedure that fits your needs.

Tip: Consider programming the remote to control channels for just the cable box to ensure you do not accidentally tune off the proper channel for the TV (usually channel 3 or 4).

Controlling Channels For One Device (Program Code 9 9 7)

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 9 7. The CBL key blinks twice.

3. Press the mode key associated with the device you want the channel keys to control.

Notes:

• The channel keys now always control the device associated with the mode you

• In AUX mode, the remote always controls channels for the device assigned to the

Controlling Channels For Different Devices (Program Code 9 9 7)

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 9 7. The CBL key blinks twice.

3. Press SELECT. All mode keys blink three times.

, , Digits 0-9, LAST, and FA V. If you want to change the channel control,

For example, if you want to assign channel control to your TV only, press TV. All mode keys blink three times.

selected in this step, whether in TV, CBL, DVD, or VCR mode.

AUX key.

Result: After you press SELECT, the channel keys now control the device associated with the mode key you select. For example, in TV mode, the channel keys control the TV, but in CBL mode, the channel keys control the cable box.

Page 9

Change Volume Control

Your remote is originally programmed in one of the following ways:

• The remote controls volume for one device, such as your TV, whether the remote is in TV, VCR, DVD, or CBL mode. The AUX mode always retains separate volume control.

• The remote controls volume for different devices, depending on the mode key you press. For example, in CBL mode, the volume keys control the cable box. However, in TV mode, the volume keys control the TV.

Try your remote to see how the volume control currently works. The volume keys include procedure that fits your needs.

Controlling Volume for One Device (Program Code 9 9 3)

Note: If you want to assign volume control to a Scientific-Atlanta cable box, complete the following prerequisite steps. Press SETTINGS to access the General Settings on-screen menu. Then, verify that the Audio: Volume Control setting is set to Variable.

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 9 3. The CBL key blinks twice.

3. Press the mode key for the device the volume keys should control. For example, if

Notes:

• The volume keys control only one device whether you are in CBL, TV, DVD,

• In AUX mode, the remote always controls volume for the device assigned to

, , and MUTE. If you want to change the volume control, complete the

you want to control volume through your TV, press TV. All mode keys blink three times.

or VCR mode.

the AUX key.

Which Code Worked?

Find out which code programmed the mode key to control your device.

Finding the Code That Worked (Program Code 9 9 0)

1. Press and hold SELECT and the appropriate mode key (CBL, TV, VCR, DVD, or AUX) until all mode keys blink twice.

2. Press 9 9 0. The mode key you selected in step 1 blinks twice.

3. Press 1 and then count the number of times the mode key blinks. The number of blinks indicates the first digit in the code. For example, 4 blinks indicates the first digit in the code is 4. If the mode key does not blink, the digit is 0.

4. Press 2 and then count the number of times the mode key blinks. This number indicates the second number in the code.

5. Press 3 and then count the number of times the mode key blinks. This number indicates the third number in the code.

6. Press 4 and then count the number of times the mode key blinks. This number indicates the fourth number in the code.

Note: After all four numbers in the code are identified, all mode keys blink three times.

7. Record the code in the space provided on the cover of this guide. You may need it again if the device code is accidentally erased.

Controlling Volume for Different Devices (Program Code 9 9 3)

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 9 3. The CBL key blinks twice.

3. Press SELECT. All mode keys blink three times. Result: After you press SELECT, the volume keys control the device assigned to that

mode. For example, in TV mode, the volume keys control volume for the TV only.

Page 10

Change Power Control

Your remote is originally programmed in one of the following ways:

• The remote controls power for only one device at a time. For example, in CBL mode the POWER key controls the cable box only. However, in TV mode, the POWER key controls the TV only.

• The remote controls power for either one device or for multiple devices at once, based on the selected mode. For example, in CBL mode, the POWER key controls both the cable box and the TV at the same time.

Before you change how the power control functions, try your remote to see how the power control currently works. When trying out your remote, keep in mind that the remote provides a temporary override for power control. For example, if you press the TV key and then the POWER key within 3 seconds, the remote turns on the TV only, regardless of the programmed power settings. To see how the remote was originally programmed, wait at least 5 seconds before pressing the POWER key after you press any mode key.

Does your remote already control power for your cable box and TV at the same time? If not, Scientific-Atlanta strongly recommends that you program the remote to turn off the cable box each time you turn off your TV. Turning off the cable box is especially important for high-end cable boxes that contain hard drives for recording and storing TV programs and movies. Not only will you reduce wear and tear from the hard disk spinning constantly, but you’ll also conserve electricity. As long as the cable box remains plugged in, the cable box will receive programming updates, and, if applicable, record programs and movies.

Controlling Power for Multiple Devices at Once (Program Code 9 9 8)

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 9 8. The CBL key blinks twice.

3. Press the mode key for the first device in the group of devices you want to power on and off at once. The CBL key blinks twice.

4. Press the mode key for the second device in your power group. The CBL key blinks twice.

5. If you want the remote to control power for 3 or 4 devices at once, press the mode keys for the next devices you want to add to the power group. The CBL key blinks twice after each mode key is pressed.

6. Press SELECT to save your power settings. All mode keys blink three times.

Want An Example?

If you want to control power for the TV and the cable box at the same time, you would do the following:

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 9 8. The CBL key blinks twice.

3. Press TV. The CBL key blinks twice.

4. Press CBL. The CBL key blinks twice.

5. Press SELECT. All mode keys blink three times. In this example, the remote will function in the following ways:

• When you are in TV mode or CBL mode, the POWER key controls both the cable box and the TV.

• When you are in VCR mode, the POWER key controls the VCR device only.

• When you are in AUX mode, the POWER key controls the auxiliary device only.

Controlling Power for One Device at a Time (Program Code 9 9 8)

1. Press and hold SELECT and CBL until all mode keys blink twice.

2. Press 9 9 8. The CBL key blinks twice.

3. Press SELECT to save your power settings. All mode keys blink three times.

After you select a mode, the POWER key controls the device assigned to that mode. For example, in TV mode, the remote controls power for the TV only.

Important Power Tips

• Scientific-Atlanta strongly recommends that you program the remote to turn off the cable box each time you turn off your TV.

• When you turn off the cable box using the remote control, you are actually putting the box in a power saving mode. As long as the cable box remains plugged in, it will continue to receive programming updates and, if applicable, record programs and movies.

• If your POWER key controls multiple devices at once, the remote returns to the CBL mode after the devices are powered on or off.

• If your POWER key controls multiple devices at once, you can override this setting by pressing the desired mode key and then pressing POWER within 3 seconds. For example, if you press the VCR key and then the POWER key within 3 seconds, the remote turns just the VCR on or off, regardless of the programmed power settings.