Scientific Atlanta AT2400 User Manual

FCC Compliance

CBL Setup Codes AUX Setup Codes

User’s Guide

AT2400 AllTouch Remote Control

A U

–

VOL

–

POWER

SELECT

INFO

8 0

GUIDE

–

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by Scientific-Atlanta could void the user’s authority to operate this equipment.

About Cable Codes

Y our cable service provider may have “locked” a valid cable code into your remote to keep you from unintentionally changing the cable code.

If you need to program the remote to operate a different device, use the following steps to unlock the remote.

1. Press and hold the SELECT key and the CBL key until the LED blinks twice.

2. Press 996.

3. Press CH- to unlock the remote.

Result: You can now set up your CBL key with a different cable code.

Cable Codes

Y ou must enter all 4 digits to program the CBL mode key .

Brand—Code

General Instrument–0290, 0490, 0824 Jerrold–0290, 0490, 0824 Motorola–1120 Panasonic–0121 Pioneer–0547, 0891, 1891 Scientific Atlanta–0491, 0891, 1891

The Explorer eClub

The Explorer eClub is an online club that provides news about the Explorer DHCT and offers you a chance to win prizes and other premium items.

T o join the Explorer eClub, you must

United States: Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway, Box 465447, Lawrenceville, GA 30042 Europe: Scientific-Atlanta Europe GmbH, Westerbachstrasse 28-32, 61476 Kronberg, Germany Asia-Pacific: Scientific-Atlanta (Singapore) Pte. Ltd., 1 Claymore Drive, #08-11 Orchard Towers, Singapore 229594 Latin America: Scientific-Atlanta Argentina S.A., Carlos Pelligrini 1149, Piso 11o, Capital Federal 1011, Buenos Aires, Argentina © 2002 Scientific-Atlanta, Inc. All rights reserved. Printed in USA www.scientificatlanta.com Part Number 749221 Rev B February 2002

enter the serial number of your DHCT . The number is located on a label on the bottom of your DHCT , and begins with S/N. Also, your cable service provider may need this number if your DHCT requires service. Write the serial number here:

S/N____________________________. Y ou can access the Explorer eClub on

the Internet at www.scientificatlanta.com/explorerclub

Receiver Codes

Brand—Code

ADC–0545 Aiwa–1419, 0172,

1103 Capetronic–0545 Carver–1103, 1203 Denon–1174, 1118 JVC–0088 Kenwood–0041,

1041, 1327,

1583, 1584 MCS–0053 Magnavox–1103,

0545, 1203 Marantz–1203, 1103,

0053 Onkyo–0149 Optimus–1037, 0545

Panasonic–0053,

1532

Philips–1103, 1203,

1283 Pioneer–0545, 1037 Proscan–1268 Quasar–0053 RCA–1268, 0545,

1037 Sansui–1103 Sony–0172, 1172,

1072, 1272 Sunfire–1327 Technics–0053,

1322, 1532, 1323 Thorens–1203 Victor–0088 Wards–0172 Yamaha–0190, 1190

Amplifier Codes

Brand—Code

GE–0092 Harman/Kardon–

0906 JVC–0345 Luxman–0179 Marantz–0335, 0906 Nakamichi–0335 Optimus–0409

Philips–0906 Polk Audio–0906 Realistic–0409 Sansui–0335 Sony–0703 Soundesign–0092 Victor–0345 Wards–0092 Yamaha–0368

Home Automation Codes

Brand—Code

GE—0254 One For All—0181 Radio Shack—0254 Security System—0181 Universal X10—0181 X10—0181

Additional Audio Codes

These codes allow you to program your remote to control cable radio set-top devices.

Brand—Code

Jerrold–0473, 0534 Scientific Atlanta–0474 Starcom–0473

About Your Remote Setting Up Your Remote

Your new AT2400 AllTouch Remote Control (“remote”) functions as four remotes in one to operate your TV, VCR, cable set-top device, or CD player. If you prefer, you can program the AT2400 AllTouch Remote Control to operate additional electronic devices, such as a stereo receiver, a DVD player, or a home automation device.

For information about the keys on the remote, go to the Quick

Reference section of this guide. Note: If you have questions or

concerns about the operation of this remote, contact your cable service provider.

Batteries

The remote requires two alkaline AA batteries. When batteries are properly installed, the LED on the remote blinks each time a button is pressed.

Important Reminder: A diagram in the battery compartment of the remote indicates proper placement of the batteries.

Mode Keys and Setup Codes

Q: What are mode keys? A: The mode keys switch the

remote to operate a particular device. These four keys are located at the top of the remote.

Q: What are setup codes? A: Setup codes are numeric codes

that identify your brand of equipment so that the remote can operate that device.

Important Reminder: The A T2400 AllTouch Remote Control is not a toy. It should be kept out of the reach of children under the age of 6 years.

T o Set Up a Mode Key

The mode keys are programmed with most of the popular brands of electronic devices, so before you perform this procedure, test each mode key.

To test the mode key, turn on your device, press the mode key for that device, and then press POWER on the remote to verify that the power to the device turns off.

If the device does not turn off, then the mode key may not be set up. Follow these steps to set up a mode key:

1. Find the code for your brand of device in one of the setup code lists in this guide.

2. Make sure that the device is turned on.

3. Press and hold the SELECT key and the appropriate mode key for that device until the LED (the light at the top of the remote) blinks twice. For example, to set up the VCR key, press and hold SELECT and VCR.

4. Enter the setup code for the device. Note: The setup codes for each mode

key appear on the front and the back of this guide.

5. Point the remote toward the device.

6. Press POWER, PLAY, or CH+ to test the device.

7. Did the device operate correctly?

• If yes, go to step 8.

• If no, repeat steps 3 through 6 using

a different setup code.

Note: If all of the codes listed for your brand of device fail to operate your device properly, go to the To Search for Codes section of this guide for instructions.

8. Repeat steps 1 through 6 for each mode key that you want to set up.

9. Write down your codes for future reference:

AUX:__________ VCR:____________

TV:____________ CBL:__________

T o Search for Codes

If none of the codes listed for your device work, you can search through the code library for a valid code. The remote automatically selects the proper code.

1. Turn on the device.

2. Hold down the SELECT key and the

appropriate mode key (AUX, VCR, TV, or CBL) until the LED blinks twice. For example, to search for a TV code, hold down SELECT and TV.

3. Using the keypad on the remote, press

991. The LED blinks once.

4. Point the remote toward the device, and

press the POWER key.

5. Did the device turn off?

• If no, press the up arrow key to go to

the next code, and return to step 4.

• If yes, press SELECT to confirm the

code.

Note: The LED on the remote blinks three times when you reach the end of the code library. Each of the code libraries contains fewer than 80 codes.

T o Identify Programmed Codes

You can find out which code you used to program your device by using the following procedure.

1. Hold the SELECT key and the appropri-

ate mode key (AUX, VCR, TV, or CBL) until the LED blinks twice.

2. Using the keypad on the remote, press

990. The LED blinks twice.

3. Press 1; then, count the LED blinks.

The number of LED blinks indicates the first digit in the code. For example, 4 blinks indicates the first digit in the code is 4. If the LED does not blink, the digit is 0.

4. Press 2; then, count the LED blinks.

The number of blinks indicates the second digit in the code.

5. Press 3; then, count the LED blinks.

The number of blinks indicates the third digit in the code.

6. Press 4; then, count the LED

blinks. The number of blinks indicates the fourth digit in the code.

7. Write down your codes in the To Set Up a Mode Key section.

To Program for Volume Control

You can program your Volume and Mute keys to function in one of two ways:

• To control the volume on a single

device all the time

• To control the volume on each

device, depending on the mode key that you press

Note:The default setting is to control volume through your TV all the time.

Follow these steps to change the way your Volume and Mute keys function.

1. Turn on the appropriate device.

2. If you have an Explorer Home Communication Terminal (DHCT), use the SETTINGS button to go to the General Settings menu on-screen, and make sure that the Audio: Volume Control setting is set to “Variable.”

3. Hold the SELECT key and the appropriate mode key (AUX, VCR, TV, or CBL) until the LED blinks twice.

4. Using the keypad on the remote, press 993. The LED blinks twice.

5. Do you want the Volume and Mute keys to operate a single device all the time?

• If yes, press the mode key for

the device that you want to control the volume.

• If no, press the VOL - key to

control the volume through various devices based on the mode key.

6. Point the remote toward the device and confirm that the Volume and Mute keys function as expected.

Digital

Quick Reference

TV Setup Codes

28 27

26 25

23 22

21 20

19 18 17

16 15

U X

–

VOL

–

Mode

1 2

26 28

TV Mode Key Cable Mode Key AUX Mode Key VCR Mode Key

Sound

Adjusts volume Mutes sound

Device Control

27 29 15

POWERS on or off LED Functions as follows:

• In VCR mode, switches TV/VCR input

• In TV mode, switches TV/Video input

• In CBL mode, controls Bypass option

POWER

SELECT

INFO

GUIDE

–

2 3

6 7

8 9

11 12 13

T9809

Viewing and Browsing Control

Functions vary by cable service provider

Selects options in menus and IPG

Displays interactive guide Displays cable settings or

menu Moves through selections

Selects and deselects screen item

Displays channel and program information

Selects channels, up or down

Views favorite channels

Returns to last channel viewed Enters channel numbers

(also enters your parental control PIN)

Features vary by cable service provider; some provide access to pay-per-view features. Note: Explorer DHCTs provide access through onscreen options.

Navigates through IPG or settings

Exits settings, menus, and guides

VCR/VOD Control

Note: In VCR mode, these keys control your VCR.

12 13 14

16 17 18

Fast forwards VCR/VOD Records program Stops VCR/VOD Plays VCR/VOD Pauses VCR/VOD Rewinds VCR/VOD

Enter all 4 digits to program the TV mode key .

Brand—Code

AOC–0033, 0044 Admiral–0107, 0477 Aiko–0106 Aiwa–0715 Akai–0044 Alaron–0193 America Action–

0194 Ampro–0765 Anam–0194 Audiovox–0106,

0194, 0465, 0637 Baysonic–0194 Belcor–0033 Bell & Howell–0030,

0168 Bradford–0194 Brockwood–0033 Broksonic–0250,

0477 CXC–0194 Candle–0044, 0070 Carnivale–0044 Carver–0068 Celebrity–0014 Cineral–0465, 0106 Citizen–0070, 0044,

0074, 0106 Concerto–0070 Contec–0194 Craig–0194 Crosley–0068 Crown–0194 Curtis Mathes–0074,

0044, 0030, 0061,

0065, 0068, 0070,

0107, 0159, 0168,

0180, 0465, 0761,

1161, 1361 Daewoo–0106, 0637,

0033, 0638, 0465 Daytron–0033 Denon–0159 Dumont–0031, 0033 Dwin–0788 Electroband–0014 Emerson–0250,

0194, 0192, 0193,

0477, 0638, 0637,

0033, 0168 Envision–0044 Fisher–0168 Fujitsu–0193

3 4

Funai–0194, 0185,

0193 Futuretech–0194 GE–0035, 0061,

1361, 0065, 0192,

0465, 1161, 0107,

0761 Gibralter–0031, 0033,

0044 GoldStar–0192, 0033,

0044, 0070 Gradiente–0070,

0067 Grunpy–0193, 0194 Hallmark–0192 Harley Davidson–

0193 Harman/Kardon–

0068 Harvard–0194 Hitachi–0159, 0070,

0030 Infinity–0068 Inteq–0031 JBL–0068 JCB–0014 JVC–0067 KEC–0194 KTV–0194, 0044 Kenwood–0044, 0033 Konka–0721, 0646,

0642, 0652, 0717 LG–0070 LXI–0168, 0061,

0068, 0170, 0192,

0761 Logik–0030 Luxman–0070 MGA–0164, 0033,

0044, 0192 MTC–0074, 0044,

0033, 0070 Magnavox–0068,

0044, 0193, 1268 Majestic–0030 Marantz–0068, 0044 Matsushita–0264 Megatron–0159,

0192 Memorex–0193,

0477, 0192, 0030,

0070, 0164, 0168,

0264 Midland–0031, 0061,

0065, 0761

Minutz–0035 Mitsubishi–0164,

0192, 0033, 0107 Motorola–0107 Multitech–0194 NAD–0170, 0180,

0192 NEC–0044, 0033,

0070 NTC–0106 Nikko–0192, 0044,

0106 Onwa–0194 Optimus–0264, 0180,

0168 Optonica–0107 Orion–0477, 0193,

0250 Panasonic–0065,

0264 Penney–0061, 1361,

0074, 0044, 0035,

0192, 0065, 0033,

0070, 0170, 0761 Philco–0159, 0033,

0044, 0068, 0477 Philips–0068 Pilot–0033, 0044 Pioneer–0180, 0693 Portland–0033, 0106 Princeton–0731 Prism–0065 Proscan–0061, 0761 Proton–0192 Pulsar–0031, 0033 Quasar–0065, 0264 RCA–0061, 1361,

1161, 0693, 1261,

0033, 0065, 0104,

0107, 0761, 1061,

1461 Radio Shack–0194,

0044, 0192, 0168,

0033, 0061, 0070,

0761 Realistic–0194, 0168,

0044, 0192, 0033,

0070 Runco–0617, 0031,

0044 SSS–0033, 0194 Sampo–0044 Samsung–0074, 0033,

0192, 0044, 0070 Sansei–0465

Sansui–0477 Sanyo–0168 Scimitsu–0033 Scotch–0192 Scott–0250, 0033,

0192, 0193, 0194

Sears–0168, 0070,

0170, 0061, 0068, 0185, 0192, 0193,

0761 Semivox–0194 Semp–0170 Sharp–0107, 0702 Shogun–0033 Signature–0030 Sony–0014, 0125 Soundesign–0192,

0193, 0194 Squareview–0185 Starlite–0194 Supreme–0014 Sylvania–0068, 0044 Symphonic–0185,

0194 TMK–0070, 0192 TNCi–0031 Tandy–0107 Technics–0065, 0264 Technol Ace–0193 Techwood–0065,

0070 Teknika–0030, 0068,

0193, 0194, 0033,

0106, 0070, 0074,

0164 Telefunken–0070 Toshiba–0170, 0074,

0168, 1270 Vector Research–

0044 Victor–0067 Vidikron–0068 Vidtech–0033, 0192 Wards–0068, 0192,

0030, 0125, 0033,

0035, 0044, 0070,

0193 White Westinghouse–

0638, 0637, 0477 Yamaha–0033, 0044 Zenith–0031, 0638,

0030, 0106, 0477

VCR Setup Codes (for VCRs, DVDs, and CD players)

Use the VCR mode key to program your VCR, DVD, or CD player. Enter all 4 digits to program the VCR mode key .

VCR Codes

Brand—Code

Admiral–0062, 0223 Adventura–0014 Aiwa–0014, 0051 Akai–0055 American High–0049 Asha–0254 Audiovox–0051 Beaumark–0254 Bell & Howell–0118 Broksonic–0135,

0198, 0223, 0493 CCE–0086 Calix–0051 Canon–0049 Carver–0095 Citizen–0051 Colt–0086 Craig–0051, 0086,

0061, 0254 Curtis Mathes–0049,

0055, 0074, 0176,

0774 Cybernex–0254 Daewoo–0059 Denon–0056 Dynatech–0014 Electrohome–0051 Electrophonic–0051 Emerex–0046 Emerson–0198,

0223, 0135, 0493,

0014, 0051, 0057 Fisher–0061, 0118 Fuji–0047, 0049

Funai–0014 GE–0049, 0074,

0062, 0254, 0774 Garrard–0014 GoldStar–0051 Gradiente–0014 HI-Q–0061 Harley Davidson–

0014 Harman/Kardon–0095 Harwood–0086 Hitachi–0056, 0014,

0055 Hughes Network

Systems–0056 JVC–0081, 0055 Jensen–0055 KEC–0051 KLH–0086 Kenwood–0055, 0081 Kodak–0049, 0051 LXI–0051 Lloyd’s–0014 Logik–0086 MEI–0049 MGA–0057, 0254 MGN Technology–

0254 MTC–0014, 0254 Magnavox–0049,

0095, 0014, 0053 Magnin–0254 Marantz–0095, 0049 Marta–0051 Matsushita–0049,

0176

Memorex–0118,

0061, 0493, 0014, 0051, 0062, 0049, 0254, 1051, 0053, 0176, 0223, 1176,

1276 Minolta–0056 Mitsubishi–0057,

0062, 0081 Motorola–0049, 0062 Multitech–0014, 0086 NEC–0055, 0081,

0118 Nikko–0051 Noblex–0254 Olympus–0049 Optimus–0176, 1076,

1176, 0062, 1276,

0051, 1062, 0118 Orion–0493, 0198,

0223 Panasonic–0049,

0176, 1176, 1276,

0239, 0630, 1076 Penney–0049, 0254,

0051, 0056 Pentax–0056 Philco–0049, 0223,

0493 Philips–0095, 0049,

0632 Pilot–0051 Pioneer–0081 Polk Audio–0095 Profitronic–0254 Proscan–0074, 0774 Protec–0086

Pulsar–0053 Quasar–0049, 0176,

1176

RCA–0074, 0056,

0049, 0062, 0254, 0774

Radio Shack–0014,

1051 Radix–0051 Randex–0051 Realistic–0014, 0118,

0061, 0062, 0051,

0049 ReplayTV–0628,

0630 Runco–0053 STS–0056 Samsung–0059, 0254 Sanky–0053, 0062 Sansui–0055, 0493,

0014, 0081, 0223 Sanyo–0061, 0118,

0254 Scott–0198, 0135,

0057, 0059 Sears–0051, 0056,

0014, 0049, 0061,

0118 Semp–0059 Sharp–0062 Shintom–0086 Shogun–0254 Singer–0086 Sony–0047, 0046,

0014, 0049, 0650,

1046

Sylvania–0049, 0095,

0014, 0057 Symphonic–0014 TMK–0254 Tatung–0055 Teac–0014, 0055 Technics–0049, 0176 Teknika–0014, 0049,

0051 Thomas–0014 Tivo–0632, 0650 Toshiba–0059, 0057 Totevision–0051,

0254 Unitech–0254 Vector–0059 Video Concepts–0059 Videosonic–0254 Wards–0049, 0074,

0014, 0061, 0254,

0056, 0062, 0086,

0095, 0774 White Westinghouse–

0086, 0223 XR-1000–0086,

0014, 0049 Zenith–0053, 0014,

0047, 0223, 0493

DVD Codes

Brand—Code

Apex–0686 Denon–0504 Fisher–0684 GE–0536 Gradiente–0665 Hitachi–0587, 0678 Hiteker–0686 JVC–0637, 0572 Kenwood–0548 Magnavox–0517,

0689 Marantz–0553 Mitsubishi–0535 Onkyo–0517 Optimus–0585 Oritron–0665 Panasonic–0504,

0646 Philips–0553, 0517 Pioneer–0585, 0539,

0646 Proscan–0536 RCA–0536, 0585 Samsung–0587

CD Codes

Brand—Code

Aiwa–0171 California Audio

Labs–0043 Carver–0171, 0193 DKK–0014 Denon–0887 Fisher–0193 Genexxa–0046 Harman/Kardon–

0171, 0187 Hitachi–0046 JVC–0086 Kenwood–0042,

0840, 0051, 0640,

0695 Krell–0171 Linn–0171 MCS–0043 Magnavox–0171 Marantz–0171, 0640,

0043 Mission–0171 NSM–0171 Onkyo–0882

Optimus–0046, 0193,

1077, 0014, 0051 Panasonic–0043 Philips–0171, 0640 Pioneer–0046, 1076,

1077 Polk Audio–0171 Proton–0171 QED–0171 Quasar–0043 RCA–0046, 1076,

0193 Realistic–0193 Rotel–0171 SAE–0171 Sansui–0171 Sanyo–0193 Sharp–0051, 0875 Sherwood–1081 Sonic Frontiers–0171 Sony–0014, 0504 Technics–0043 Victor–0086 Wards–0171 Yamaha–0902

Sharp–0644 Sony–0547 Technics–0504 Theta Digital–0585 Toshiba–0517 Yamaha–0504, 0559 Zenith–0605, 0517

Setup codes for the AUX and CBL mode keys are located on page 7 of this guide.