Scientific Atlanta 8600X User Manual
Series 8600x Remote Control User’s Guide
TV Brands and Codes*
Find your three-number TV code among the following entries. Some brands
may have more than one code. All codes have only three numbers. Once you
nd the correct code for your TV, write it in the box for future reference.
* These codes are REV A of the Model 8650-XT Remote Control; they are subject to change.
Television Three Number
brand** codes
A-Mark 003
Akai 004
Anam 032,067
Anam National 028
AOC 003, 010, 017,
025, 044
Archer 003
Audiovox 003
Candle 017, 023, 029, 072
Capehart 025
Carver 027
Citizen 017, 022, 023, 029,
030, 035,
072
Concerto 029
Contec 055, 067, 071
Caig 067
Crown 022
Curtis Mathes 017, 022, 030
CXC 067
Daewoo 010, 022, 034, 035
Dayton 022
Electrohome 022
Emerson 022, 055, 064, 065,
066, 067, 068, 069,
070, 071, 076, 077,
079, 080
Envision 017
Fisher 052, 056
Fortress 036
Fujitsu 066
Funai 066, 067
Futuretech 067
GE 000, 012, 014, 016,
024, 028, 063, 065,
080
Goldstar 002, 010, 022, 029,
065
Hallmark 065
Hitachi 021, 022, 029, 037,
039, 045, 050, 062,
075
Television Three Number
brand** codes
Innity 027
IBL 027
Kawasho 081
Kenwood 017
Kloss 023
Kloss Novabeam 013
KTV 022, 067, 071, 079
Logik 007
Luxman 029
LXI 024, 027, 047, 052,
054
Magnavox 011, 013, 015, 017,
027, 038, 072, 073
MGA 010, 017, 049, 053,
065
Mitsubishi 005, 010, 040, 053,
065
MitsubishiUnied 049
MTC 010, 017, 029, 030,
034
Multitech 074
NAD 054, 058
NEC 010, 029, 060
NECUnied 017
Onwa 067
Optonica 036, 057
Panasonic 000, 027, 028
Penney 009, 010, 012,
017, 022, 024, 030,
041, 043, 048
Penny 019
Philco 010, 011, 013, 015,
017, 027, 072, 073
Philips 001, 027
Pioneer 021, 058
Portland 010, 022
Proton 018, 022, 025, 065
Pulsar 008
Quasar 000, 028
Radio Shack 019, 022, 057, 067
RCA 009, 010, 016, 021,
043, 063, 084
Television Three-number
brand** codes
RCAUnied 024
Realistic 052
Sampo 017, 025, 041
Samsung 010, 017, 019, 022,
029, 030
Sanyo 046, 052, 056
Scott 022, 066, 067, 076
Sears 006, 024, 027, 029,
046, 047, 048, 052,
054, 056, 059, 065,
066
Sharp 022, 036, 051, 057
Signature 007
Sony 004, 033, 042
SonyUnied 001
Soundesign 065, 067, 072
Spectricon 003, 044
SSS 010, 067
Supre-Macy 023
Sylvania 011, 013, 015, 017,
027, 031, 072, 073
Symphonic 061
Tandy 036
Tatung 028
Technics 000
Techwood 029
Teknika 007, 010, 022, 023,
029, 030, 035, 049,
066, 067, 072, 082,
083
Tera 018
TMK 029, 065
Toshiba 020, 030, 048, 052,
054
Tosonic 071
Totevision 022
Universal 012, 014
Vector Research 017
Victor 026
Video Concepts 040
Vidtech 010, 065
Viking 023
Wards 007, 010, 011, 012,
014, 015, 016, 017,
027, 038, 057, 063,
065, 066, 073
Yamaha 010, 017
Zenith 007
ZenithUnied 008
Zonda 003
**All trademarks apply.
Conway Corporation 1307 Prairie Street Conway, Arkansas 72034 501-450-6000 www.conwaycorp.com
Series 8600
x™
Remote Control
Before You Begin
You may use your remote control to
operate your 8600x Home Communications Terminal right away. There
are instructions for using the keys on
the back of your remote control. But if
you want your remote control to operate your TV power on/off, volume and
mute controls, you need to follow the
instructions that follow.
To control your TV functions, you
need to tell your remote control the
type of TV you are using. This will
enable you to use your remote control
to operate the power, on/off, volume
and mute controls on your TV. To tell
your remote control the type of TV
you are using, follow steps 1 through
4.
Step 1.
Find your TV code.
Find the three-number TV code(s) that
corresponds to your TV. Most brands
have more than one code. Start with
therstcode.
Step 2.
Turn your TV on.
Step 3.
To tell your remote control to turn
your TV on and off, and to control
your TV’s volume and mute, follow
the three steps below.
(If you want your remote control to only
turn your TV on and off, skip this step and
go to step 4.)
A. Hold down the TV POWER
key.
B. Enter your three-number
TV code.
C. Release the TV POWER
key.
• Your TV should turn off when you
enter the third number of the code.
• If your TV does not turn off when
you enter the third number of the
code, turn to TV Brands and Codes
andndthenextcodeforyourTV.
Repeat step 3 using the next code.
Continue repeating this step until your
TV turns off.
If none of the codes for your type of
TV work, see If You Have A Problem
in the guide.
Step 4.
To tell your remote control to
ONLY turn your TV on and off, follow the four steps below.
A. Hold down the TV POWER
key.
B. Press 9
C. Enter your three-number
TV code.
D. Release the TV POWER
key.
• Your TV should turn off when you
enter the third number of the code
• If your TV does not turn off when
you enter the third number of the
code, turn to TV Brands and Codes
andndthenextcodeforyourTV.
Repeat step 3 using the next code.
Continue repeating this step until your
TV turns off.
If none of the codes for your type of
TV work, see If You Have A Problem
in the guide.
If You Have A Problem
If you are unable to nd the correct
code in TV Brands and Codes, the
Series 8600x Remote Control can
search all the codes for you. To do
this, do the following:
1. Turn your TV on.
2. Hold TV POWER down and press
999 on the number keys to tell your
remote control to operate your TV
power on/off, volume and mute. Or,
press 9999 if you want your remote
control to operate only the TV power
on/off.
3. Repeatedly press TV POWER until
your TV turns off. When your TV
turns off, stop pressing TV POWER.
(There are at least 85 different codes,
so this may take some time.)
4. Press LAST
You may press MENU at any time to
end the search.
If your remote control will not operate your TV, try the following:
• Make sure the remote control is
correctly programmed - see steps 1
through 4
• Shorten the distance between the
remote control and the TV. Also, point
the remote control directly at your TV
or home communications terminal
• Replace the batteries. Your remote
control uses two AA alkaline batteries.
If you replace the batteries in the
remote control, you must repeat steps
1 through 4.
8600x™ is a trademark of Scientic-Atlanta, Inc.
Loading...