Schwinn Cruiser User Manual

ASSEMBLY/OWNER’S

MANUAL

Table of Contents

Important Safety Instructions 3 Safety Warning Labels / Serial Number 5

Specications 6

Before Assembly 6 Tools 6 Parts 7 Hardware 7 Assembly 8 Leveling the Bike 17 Moving the Bike 17 Features 18 Operations 21 Adjustments 21 Workout Mode 22 Pausing or Stopping 22 Workout Results 23 Maintenance 24 Troubleshooting 26 Warranty 30

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number __________________________

Date of Purchase ____________________

To register your product warranty, go to: www.SchwinnFitness.com/register

Or call 1 (800) 605–3369.

If you have questions or problems with your product, please call 1-800-605-3369.

Nautilus, Inc., (800) 605-3369, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | © 2017 Nautilus, Inc. ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Schwinn, the Schwinn Quality logo, and Classic Cruiser are trademarks owned by or licensed to Nautilus, Inc. Google Play™, and iTunes owners. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Nautilus, Inc. is under license.

are trademarks of their respective

Important Safety Instructions

This icon means a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

Obey the following warnings:

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions.

• Keep bystanders and children away from the product you are assembling at all times.

• Do not connect power supply to the machine until instructed to do so.

• Do not assemble this machine outdoors or in a wet or moist location.

• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafcand

exposure to bystanders.

• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

• Set up this machine on a solid, level, horizontal surface.

• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual.

• ReadandunderstandthecompleteManualsuppliedwiththismachinebeforerstuse.

Keep the Manual for future reference.

• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

• SAVE THESE INSTRUCTIONS.

Before using this equipment, obey the following warnings:

Read and understand the complete Manual. Keep the Manual for future

reference.

Read and understand all warnings on this machine. If at any time the Warning labels become loose, unreadable or dislodged, contact Nautilus Customer Service for replacement labels.

• Children must not be let on or near to this machine. Moving parts and other features of

the machine can be dangerous to children.

• Not intended for use by anyone under 14 years of age.

• Consult a physician before you start an exercise program. Stop exercising if you feel

pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only.

• Before each use, examine this machine for loose parts or signs of wear. Do not use

if found in this condition. Monitor the Seat, Pedals, and Crank Arms closely. Contact Nautilus Customer Service for repair information.

• Maximum user weight limit: 300 lbs. (136 kg). Do not use if you are over this weight.

• This machine is for home use only.

• Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put

ngersorotherobjectsintomovingpartsoftheexerciseequipment.

• Set up and operate this machine on a solid, level, horizontal surface.

• Make the Pedals stable before you step on them. Use caution when you step on and

off the machine.

• Disconnect all power before servicing this machine.

• Do not operate this machine outdoors or in moist or wet locations. Keep the foot

pedals clean and dry.

• Keep at least 24” (0.6 m) on each side of the machine clear. This is the recommended

safe distance for access and passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in use.

• Do not over exert yourself during exercise. Operate the machine in the manner

described in this manual.

• Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that

the Adjustment Devices do not hit the user.

• Exercise on this machine requires coordination and balance. Be sure to anticipate that

changes in speed and resistance level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.

• Prior to use, read and understand the owner’s manual. The appliance is not to be

used by persons with functional limitations and impairments, reduced physical, sensory or mental capabilities, or lack of experience and knowledge.

Safety Warning Labels and Serial Number

• Injury or death is possible if caution is not used while using this machine.

• Keep children and pets away.

• Read and follow all warnings on this machine.

• Refer to the Owner’s Manual for additional warnings and safety information.

• The heart rate displayed is an approximation and should be used for reference only.

• Not intended for use by anyone under 14 years of age.

• The maximum user weight for this machine is 300 lbs (136 kg).

• This machine is for home use only.

• Consult a physician prior to using any exercise equipment.

WARNING!

Serial Number and Product

Specications

FCC Compliance

Changes or modications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

The machine and power supply comply with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This machine and power supply have been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Specifications / Tools

Maximum User Weight: 300 lbs. (136 kg)

Machine Weight: 73 lbs. (33.1 kg)

Power Requirements:

Operational Voltage: 9VDC Operating Current: 1.5A

Regulatory Approvals:

AC Power Adapter: UL listed, CSA

certied(orequivalent),Rated120V

60Hz Input, 9VDC, 1500mA Output. Class 2.

48”

(122 cm)

47.5” (120.7 cm)

22.5” (57.2 cm)

This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 95.5” x 70.5” (242.6 cm x 179 cm).

Basic Assembly Tips

Follow these basic points when you assemble your machine:

1. Read and understand the “Important Safety Instructions” before assembly.

2. Collect all the pieces necessary for each assembly step.

3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.

4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.

5. The assembly requires 2 people.

Tools

Included

5 mm

larger diame- ter clamp

Parts / Hardware

Item Qty Description Item Qty Description

1 1 Handlebar Post 9 1 Seat Adjustment Clamp

2 1 Handlebar Assembly 10 1 Seat Post

3 1 Media Rack 11 1 Seat

4 1 Handlebar Adjustment

12 1 Console

Clamp

5 1 Frame Assembly 13 1 Pedal, Left

6 1 Front Stabilizer 14 1 Rear Stabilizer

7 4 Leveler 15 1 Power Supply

8 1 Pedal, Right

A B D

A 6 Button Head Hex Screw,

M8 x 20

C E

D 4 Socket Head Cap Screw,

M6 x12

B 6 Lock Washer, M8 E 4 Lock Washer, M6

C 6 Flat Washer, M8

Note: Select pieces of Hardware have been provided as spares on the Hardware Card. Be aware that there may be remaining Hardware after the proper assembly of your machine.

Assembly

Note: Because of the cables that run from the Handlebars to inside the Frame Assembly, be sure to carefully unpack and place the Handlebars in front of the Frame Assembly. Be sure not to crimp the cables during unpacking or assembly.

1. Attach Levelers to the Front and Rear Stabilizers

2. Attach the Stabilizers to the Frame Assembly

5mm

3. Attach the Seat to the Seat Post

NOTICE : Tighten the bolts on each side of the Seat bracket to hold the Seat in posi-

tion.

4. Place the Seat and Handlebar Adjustment Clamps on the Frame Assembly

NOTICE : Orient the clamps so the inner ridge rests on the top of the posts from the

Frame Assembly. Do not fully tighten.

+ 22 hidden pages