SCHURTER OGN Technical data
Fuseholder Blocks & Clips
Fuseholder Open Design, 5 x 20 mm, THT, var. Covers, IEC 60335-1
250 VAC · 4 W / 10 A (VDE) · 500 VAC/DC · 10 A (UL/CSA)
OGN
www.schurter.com/pg02b
Description
- Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances
in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order
number: 0031.82x1.15
- Low profile fuse block with insulation walls
- Screw or rivet fastening
Standards
- IEC 60127-6
- UL 4248-1 / UL 512
- CSA C22.2 no. 39
Approvals
- VDE Certificate Number: 40001042
- UL File Number: E39328
- CSA File Number: 38456
Technical Data
Fuse-Link 5 x 20 mm
Mounting PCB
Mounting Screw or Rivet
Terminal Solder THT
Rated Voltage 250 VAC (VDE), 500 VAC/DC (UL/CSA)
Rated Current 10 A (VDE), 10 A (UL/CSA)
Rated Power Acceptance IEC 4 W / 10 A @ Ta 23 °C
2.5 W / 10 A with transparant cover, see
derating curves
Degree of Protection IP 00 / IP 20
Protection Class Suitable for appliances with protection
class 1 or 2 acc. to IEC 61140
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Socket see variants
Material: Terminals Tin-Plated Copper Alloy
Unit Weight (Socket/Cap) 1.7 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking , Type, Voltage, Power Acc./Current
Rating, Approvals
Applications
- Industrial electronic
- Household appliances
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, SCHURTER-Stock-Check, DistributorStock-Check, Accessories
Soldering Methods Wave
Solderability 235 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 1
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A
Contact Resistance < 5 mΩ at 20 mV
Dielectric Strength > 3 kV between L-N
(50 Hz; 1 min)
Impulse Withstand Voltage > 4 kV between L-N
Insulation Resistance > 10 MΩ between L-N
(500 VDC; 1 min)
Overvoltage Category I - III acc. to IEC 60664-1
Pollution Degree 1 - 3 acc. to IEC 60664-1
Resistance to Vibration acc. to IEC 60068-2-6, test Fc
Fuses
1
OGN
11.54
12.7
22.5
25
1.1
10.8
22.5
25
9.6
ø 2.7
90˚
1.3
+0.1
0
22.5
25
0 20 40 60 80 100
1.5
1.0
0.5
0.0
I = < < I
n
I = 0.7 I
n
I = 1.0 I
n
2.5
2.0
0 20 40 60 80 100
I = < < I
n
I = 0.7 I
n
I = 1.0 I
n
0.5
0.0
4.0
1.5
1.0
2.0
3.0
2.5
3.5
Fuseholder Blocks & Clips
www.schurter.com/pg02b
Abmessungen
Derating Curves
With Transparent Cover
22.5 mm
Drilling diagram
Admissible Power Acceptance in Watt
Ambient Air Temperature Ta °C
Ambient Air Temperature Ta °C
Variants
Admissible Power Acceptance in Watt
Holder Pin distance Colour Holder Material Remark Order Number
l
l
Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This
includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13.
Packaging Unit
22.5 black Thermoplastic - 0031.8201
25 black Thermoplastic - 0031.8211
Bulk 128 x 91 x 60 mm (100 pcs.)
Accessories
Description
Covers for OGN, OGN-SMD
Cover for Holder OGN, OGN-SMD
Transparent Cover 0853.0551
Reflow-Cover 0853.0571
Cover, black, meets IEC 60335-1 Ed. 4.0
Reflow-Cover with Clamp
0853.0575
0853.0576
2
Adapter to OGN, OGN-SMD
Fuse Carriage with Handle for OGN, OGN-SMD
black 0853.1201
white 0853.1202
blue 0853.1203
brown 0853.1204
The specifications, descriptions and illustrations indicated in this document are based on
Fuses
current information. All content is subject to modifications and amendments.
Loading...