Schneider Electric SSP1A450BDT Data Sheet

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.

This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

Product data sheet

Characteristics

SSP1A450BDT

solid state relay-panel mount-thermal pad-input
4-32V DC, output 48-660V AC,50 A

Main

Range of product Zelio Relay

Product or component
type

Provided accessory Thermal pad

Device short name SSP1

Mounting support Panel

Number of phases 1 phase

Contacts type and
conifguration

[In] rated current 50 A

Solid state output type Zero voltage switching

Complementary

Control circuit voltage 4...32 V DC

Switching voltage >= 4 V DC turn-on

Response time 0.5 cycle turn-off

Input current 7...12 mA

Output voltage 48...660 V AC

Load current 0.15...50 A

Transient overvoltage 1200 V

Surge current <= 625 A for 16.6 ms

Maximum I²t for fusing 1629 A².s for 8.33 ms at 60 Hz half cycle

Co-ordination type Type 2 - 32 A miniature circuit breaker (MCB) - curve B

Leakage current <= 1 mA off-state

Voltage drop 1.15 V on-state

DV/Dt 500 V/µs off-state at maximum voltage

Power factor 0.5 with maximum load

Motor controller rating 5 hp 480 V AC

Insulation resistance 1000 MOhm at 500 V DC

Maximum capacitance 8 pF for input/output

Dielectric strength 4 kV AC for input or output to case

[Uimp] rated impulse withstand voltage 6 kV input to output

Tightening torque 2...2.2 N.m for output

Connections - terminals Ring lugs : 11.7 x 4.5 mm for output

Thermal resistance 0.45 °C/W junction to case

Thermal pad impedance 0.48 °C-in²/W at 25 psi

Dec 1, 2015

<= 1 V DC turn-off

0.5 cycle turn-on

1770 A².s for 10 ms at 50 Hz half cycle

Type 1 - 40 A miniature circuit breaker (MCB) - curve B

2 hp 240 V AC

0.75 hp 120 V AC

4 kV AC for input/output

6 kV output to case

1.5...1.7 N.m for input

Forked type tag connectors : 11.7 x 4.5 mm for output
Ring lugs : 9.2 x 4 mm for input
Forked type tag connectors : 9.2 x 4 mm for input
Screw terminals : 0.5...8.26 mm², (AWG 20...AWG 8) without cable end for output
Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) without cable end for input
Screw terminals : 0.5...5.26 mm², (AWG 20...AWG 10) with cable end for output
Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) with cable end for input

Solid state relay

1 NO

SCR output

1

LED indicator LED green for input status

IP degree of protection IP20

Product weight 89.2 g

Environment

Ambient air temperature for operation -40...80 °C

Ambient air temperature for storage -40...125 °C

Pollution degree 2

Overvoltage category III

Product certifications CE

Marking CE

Standards EN/IEC 60950-1

CSA
RoHS
UL
REACH
EAC

CSA
UL
EAC

UL 508
EN/IEC 62314
CSA C22.2 No 14-13

2