Schneider Electric SSP1A175M7T Data Sheet

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.

This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

Product data sheet

Characteristics

SSP1A175M7T

solid state relay-panel mount-thermal pad-input
90-280VAC,output 24-300V AC,75 A

Main

Range of product Zelio Relay

Product or component
type

Provided accessory Thermal pad

Device short name SSP1

Number of phases 1 phase

Contacts type and
conifguration

[In] rated current 75 A

Solid state output type Zero voltage switching

Complementary

Control circuit voltage 90...280 V AC

Switching voltage >= 90 V AC turn-on

<= 10 V AC turn-off

Response time 25 ms turn-on

30 ms turn-off

Input current 5...10 mA

Output voltage 24...300 V

Load current 0.15...75 A

Transient overvoltage 600 V

Surge current <= 1000 A for 16.6 ms

Maximum I²t for fusing 4555 A².s for 10 ms at 50 Hz half cycle

4150 A².s for 8.33 ms at 60 Hz half cycle

Co-ordination type Type 2 - 40 A miniature circuit breaker (MCB) - curve B

Type 1 - 50 A miniature circuit breaker (MCB) - curve B

Leakage current <= 1 mA off-state

Voltage drop 1.15 V on-state

DV/Dt 500 V/µs off-state at maximum voltage

Power factor 0.5 with maximum load

Motor controller rating 3 hp 240 V AC

1.5 hp 120 V AC

Insulation resistance 1000 MOhm at 500 V DC

Maximum capacitance 8 pF for input/output

Dielectric strength 4 kV AC for input or output to case

4 kV AC for input/output

[Uimp] rated impulse withstand voltage 6 kV input to output

6 kV output to case

Tightening torque 2...2.2 N.m for output

1.5...1.7 N.m for input

Connections - terminals Ring lugs : 11.7 x 4.5 mm for output

Forked type tag connectors : 11.7 x 4.5 mm for output
Ring lugs : 9.2 x 4 mm for input
Forked type tag connectors : 9.2 x 4 mm for input
Screw terminals : 0.5...8.26 mm², (AWG 20...AWG 8) without cable end for output
Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) without cable end for input
Screw terminals : 0.5...5.26 mm², (AWG 20...AWG 10) with cable end for output
Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) with cable end for input

Thermal resistance 0.3 °C/W junction to case

Thermal pad impedance 0.48 °C-in²/W at 25 psi

LED indicator LED green for input status

Solid state relay

1 NO

SCR output

Dec 1, 2015

1

IP degree of protection IP20

Product weight 89.2 g

Environment

Ambient air temperature for operation -40...80 °C

Ambient air temperature for storage -40...125 °C

Pollution degree 2

Overvoltage category III

Product certifications CE

Marking CE

Standards EN/IEC 60950-1

CSA
RoHS
UL
REACH
EAC

CSA
UL
EAC

UL 508
EN/IEC 62314
CSA C22.2 No 14-13

2