Schneider Electric SSP1A125BDT Data Sheet
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Product data sheet
Characteristics
SSP1A125BDT
solid state relay-panel mount-thermal pad-input
3-32V DC, output 24-300V AC,25 A
Main
Range of product Zelio Relay
Product or component
type
Provided accessory Thermal pad
Device short name SSP1
Mounting support Panel
Number of phases 1 phase
Contacts type and
conifguration
[In] rated current 25 A
Solid state output type Zero voltage switching
Complementary
Control circuit voltage 3...32 V DC
Switching voltage >= 3 V DC turn-on
Response time 0.5 cycle turn-off
Input current 10 mA at 12 V DC
Output voltage 24...300 V AC
Load current 0.15...25 A
Transient overvoltage 600 V
Surge current <= 250 A for 16.6 ms
Maximum I²t for fusing 285 A².s for 10 ms at 50 Hz half cycle
Co-ordination type Type 2 - 20 A miniature circuit breaker (MCB) - curve B
Leakage current <= 1 mA off-state
Voltage drop 1.15 V on-state
DV/Dt 500 V/µs off-state at maximum voltage
Power factor 0.5 with maximum load
Motor controller rating 1 hp 240 V AC
Insulation resistance 1000 MOhm at 500 V DC
Maximum capacitance 10 pF for input/output
Dielectric strength 4 kV AC for input or output to case
[Uimp] rated impulse withstand voltage 6 kV input to output
Tightening torque 2...2.2 N.m for output
Connections - terminals Ring lugs : 11.7 x 4.5 mm for output
Thermal resistance 0.8 °C/W junction to case
Thermal pad impedance 0.48 °C-in²/W at 25 psi
LED indicator LED green for input status
Dec 1, 2015
<= 1 V DC turn-off
0.5 cycle turn-on
259 A².s for 8.33 ms at 60 Hz half cycle
Type 1 - 25 A miniature circuit breaker (MCB) - curve B
0.5 hp 120 V AC
4 kV AC for input/output
6 kV output to case
1.5...1.7 N.m for input
Forked type tag connectors : 11.7 x 4.5 mm for output
Ring lugs : 9.2 x 4 mm for input
Forked type tag connectors : 9.2 x 4 mm for input
Screw terminals : 0.5...8.26 mm², (AWG 20...AWG 8) without cable end for output
Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) without cable end for input
Screw terminals : 0.5...5.26 mm², (AWG 20...AWG 10) with cable end for output
Screw terminals : 0.2...3.3 mm², (AWG 24...AWG 12) with cable end for input
Solid state relay
1 NO
SCR output
1
IP degree of protection IP20
Product weight 89.2 g
Environment
Ambient air temperature for operation -40...80 °C
Ambient air temperature for storage -40...125 °C
Pollution degree 2
Overvoltage category III
Product certifications CE
Marking CE
Standards EN/IEC 60950-1
CSA
RoHS
UL
REACH
EAC
CSA
UL
EAC
UL 508
EN/IEC 62314
CSA C22.2 No 14-13
2
Loading...