L-SERIES
L-SERIES
Extra Heavy Duty Mortise Locks
Extra Heavy Duty Mortise Locks
The Schlage L-Series mortise lock line is a heavy duty commercial mortise lock
containing a wide array of knob and lever designs. It is available in a variety
of keyed and non-keyed functions, and in most popular decorative finishes.
It is U.L. Listed and can be specified for applications in offices, schools, hospitals,
hotels, and commercial buildings, as well as residences. The L-Series lock meets
or exceeds the ANSI A156.13 specification, making it the best choice for any
building where security, safety, and design compatibility are the prime consider ations.
The L-Series lock uses one common mortise lock case for all trim. This allows
excellent design flexibility in trim combinations such as knob by lever, lever by
knob, as well as knob by knob or lever by lever. The outstanding feature of
its quickly-reversible handing, allowing orders to be filled quickly at the
distributor level from stock on hand. Our L9000-Series mortise lock can
be easily handed on-site without disassembling the lock case.
SERIES
L
Armored Fronts 21
Cylinders 14-17
Cylinder Cams 18
Cylinder Collars 19
Designs & Finishes 3-5
Door Handing 22
Door Preparation 2
Electrified Locks 20
Escutcheons, Roses, Special Tu rns & Finishes 6
Cutaway View 2
Functions 7-13
How to Order 23
Interchangeable Core 16-17
L-Mediterranean Designs & Finishes 5
Performance Features 2
Primus
®
Cylinders 14-15
Primus Interchangeable Core 16
Small Format Interchangeable Core 17
Specifications 1
Strikes 21
On our cover, the L9453P 17L in Bright Bronze.
Specifications
Applications: For commercial and institutional buildings where
the finest in mortise locks are required.
Certifications: L9000: ANSI A156.13 Series 1000,
Grade 1 Operational and Security, UL Listed for 3-hour
fire door (except L9076 and L9077). With interchangeable core
cylinders: Grade 2 Security. L400: ANSI A156.5 Grade 1
UL Listed auxiliary lock for 3-hour fire door.
With Concealed Cylinder: A156.13 Grade 1 Operational and
Security. ANSI/ASTM F476-76 Grade 40, UL Listed.
Exposed Trim:
Knobs: #41 and #42 heavy duty wrought brass, bronze or stainless
steel knobs match in appearance and are equal to D-Series knobs.
Levers: Levers are available in forged brass or bronze and cast
stainless steel. Designs available to match D-Series levers.
93 Lever Design: Extruded brass, bronze or stainless steel.
Mediterranean Designs: Forged brass lever and rose designs.
Escutcheons: L escutcheons are cold forged brass or bronze and
stainless steel. N escutcheons are heavy wrought reinforced brass,
bronze and stainless steel. L = 8 x 1³⁄₄ x ⁷⁄₁₆ (203mm x 44mm
x 11mm). N = 8 x 2 ⁹⁄₁₆ x ⁷⁄₁₆ (203mm x 65mm x 11mm).
Roses: A = 2¹⁄₈ (54mm) diameter wrought brass, bronze or
stainless steel.
B = 2⁹⁄₁₆ (65mm) diameter wrought brass, bronze or
stainless steel.
Trim Combinations: Available with knob both sides, lever both
sides, or knob x lever with rose or escutcheon both sides.
Keying: 6-pin cylinder with two nickel silver Everest
patented keys standard. Keying options available from factory
are master keying, construction keying, interchangeable core,
SFIC and Primus® high security cylinders.
Door Range: 1³⁄₄ (44mm) Standard. 1³⁄ (35mm) to 2¹⁄
(64mm) Regular parts assembled to order. Over 2¹⁄ (64mm)
door ranges vary by function. N escutcheon available for 1³⁄₄
(44mm) doors standard. 2 (51mm) to 2³⁄ (60mm) Regular
parts assembled to order. Specify door thickness if other than
1³⁄₄.
Case Size: 4⁷⁄₁₆ x 6¹⁄₁₆ x 1 (113mm x 154mm x 25mm).
Armored Front: 1¹⁄₄ x 8 x ⁷⁄₃₂ (32mm x 203mm x 6mm)
Standard. 1¹⁄₁₆ x 8 x ⁷⁄₃₂ (27mm x 203mm x 6mm) Optional.
Spacing: Knob or lever to cylinder, 3⁷⁄₈ (98mm); knob or
lever to thumbturn hub, 2¹¹⁄₁₆ (68mm).
Deadbolt: 1 (25mm) Throw stainless steel.
Latchbolt: ³⁄₄ (19mm) Throw stainless steel with anti-friction
tongue.
Backset: 2³⁄₄ (70mm) Only.
1
SERIES
L
2
SERIES
L
Performance Features
Exceeds ANSI A156.13 Grade 1 lever torque requirements.
Exceeds 800,000 cycle ANSI Grade 1 requirements.
Grade 1 security with concealed mortise cylinder.
Grade 2 security with full face mortise cylinder.
U.L. Listed for all functions except L9076 and L9077 for 3-hour doors, single fire-rated doors
not exceeding four feet in width and ten feet in height.
Universal lock chassis, one lock case for knobs or levers.
Replaceable breakaway spindle is designed to resist excessive force from vandalism,
preventing damage to lever trim and internal lock case components.
Solid stainless steel 1¹⁄₂ (38mm) deadbolt, 1 (25mm) projected.
Heavy duty ³⁄₄ (19mm) latchbolt with anti-friction tongue standard.
Hand is quickly reversible without opening lock case.
Door Preparation
Deeper cylinder retainer groove
in cylinder shell increases security
against wrenching and pullout.
All cylinders backward compatible.
High strength steel alloy
cylinder retainer
Armor front
Brass, bronze or
stainless steel
Adjustable for door bevel
1” (25mm) throw
deadbolt
Stainless steel
Captured cylinder
set screw for easier
cylinder mounting
Non-handed
auxiliary latch
Full 3/4” (19mm)
latchbolt
Standard
Heavy duty
anti-friction tongue
Standard
Fusible link built into lockcase
Standard
Stopworks operates
by thumbturn.
Steel case and parts
corrosion protected
Trim applied by threaded bushing
No exposed screws
Cutaway View
See templates.
Note: L-Series mortise locks meet
all requirements for installation
in doors and frames prepared in
accordance with ANSI 115.1.
6 Pin Everest Cylinder with
patented keys standard
Lever Designs & Finishes
3
SERIES
L
01
Material: Forged brass and
cast stainless steel
Finishes: 625, 626, 630
02
Material: Forged brass and
cast stainless steel
Finishes: 625, 626, 630
03
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
05
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 625, 626, 630
06 (D Rhodes)
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
07 (D Athens)
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
12
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
Specify door hand
93
Material: Extruded brass,
bronze, or stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
17 (D Sparta)
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
613
625
625
612
611
605
625
625
626
2-11/16"
64mm
96mm
3-7/8"
2-15/16 "
75 mm
4-3/4"
121 mm
4-3/4"
121mm
3"
76mm
13mm
1/2"
2-7/8"
73mm
3-3/4"
95mm
2-3/4"
73mm
13mm
1/2"
4-5/8"
117mm
2-7/8"
75mm
4-5/8"
117mm
3-5/8"
92mm
4-5/8"
117mm
13mm
1/2"
3-1/4"
76mm
5"
127mm
3"
76mm
13mm
1/2"
4-3/4"
121mm
18
Material: Forged brass, bronze,
and cast stainless steel
Finishes: 605, 606, 612,
613, 625, 626,
629, 630
605
2-5/8"
4-7/8"
124 mm
67 mm
4
SERIES
L
Knob Designs & Finishes
41 (D PLYMOUTH)
Material: Heavy wrought
brass, bronze, or stainless steel
Finishes: 605, 606, 612,
613, 625, 626, 629, 630
612
2-3/4"
73mm
2-1/4"
57mm
42 (D ORBIT)
Material: Heavy wrought
brass, bronze, or stainless steel
Finishes: 605, 606, 612,
613, 625, 626, 629, 630
2-3/4"
73mm
2-1/8"
54mm
626
Finishes
605 Bright Brass
606 Satin Brass
610 Bright Brass, Blackened
612 Satin Bronze
613 Oil Rubbed Bronze
625 Bright Chromium Plated
626 Satin Chromium Plated
629 Bright Stainless Steel
630 Satin Stainless Steel
5
SERIES
L
Mediterranean Designs & Finishes
ASTI
Symbol: AST
Material: solid forged brass
Finishes: 605, 625
MERANO
Symbol: MER
Material: Solid forged brass
Finishes: 605, 625
505
625
2-5/8"
66 mm
2-9/16"
65 mm
4"
102 mm
2-5/8"
66 mm
3-1/16"
78 mm
4"
102 mm
This product offering combines the beauty of Schlage’s
Mediterranean levers with all the features and benefits of
our L-Series heavy duty commercial mortise lock.
Two designs, Asti and Merano, are offered in two finishes.
The L escutcheon is also available in addition to the special
roses shown below.
All exposed trim is forged of solid brass and available in our
bright brass finish or our high quality bright chrome finish.
We offer you the added benefit of our extended warranty of
10 years for commercial applications and a lifetime warranty
for Residential applications.
Finishes
605 Bright Brass
625 Bright Chromium Plated
6
SERIES
L
Escutcheons, Roses, Special Turns & Finishes
Finishes
605 Bright Brass
606 Satin Brass
612 Satin Bronze
613 Oil Rubbed Bronze
625 Bright Chromium Plated
626 Satin Chromium Plated
629 Bright Stainless Steel
630 Satin Stainless Steel
L FULL FACE
Material: Cold forged brass,
bronze, or stainless steel
Finishes: 605, 606,
612, 613, 625,
626, 629, 630
8 x 1³⁄₄ x ⁷⁄₁₆
(203mm x 44mm x 11mm)
A-WROUGHT ROSE
2¹⁄₈ (54mm) Diameter
Available for use on L-Series
knob and lever designs. Order by
letter designation corresponding
to the design and diameter
desired.
626
611
625
L CONCEALED
Material: Cold forged brass,
bronze, or stainless steel
Finishes: 605, 606,
612, 613, 625,
626, 629, 630
8 x 1³⁄₄ x ⁷⁄₁₆
(203mm x 44mm x 11mm)
625
B-WROUGHT ROSE
2⁹⁄₁₆ (65mm) Diameter
Available for use on L-Series
knob and lever designs.
Order by letter designation
corresponding to the design
and diameter desired.
N ESCUTCHEON
Material: Heavy wrought
reinforced brass, bronze,
or stainless steel
Finishes: 605, 606,
612, 613, 625,
626, 629, 630
8 x 2⁹⁄₁₆ x ⁷⁄₁₆
(203mm x 65mm x 11mm)
626
7/16"
11mm
8"
203mm
7/16"
11mm
8"
203mm
7/16"
11mm
8"
203mm
HOTEL OCCUPANCY
INDICATOR
09-611
For lock function L9486P, this
unit is used with A or B design
roses only. It requires a
1³⁄₈ (35mm) cylinder for 1³⁄₄
(44mm) doors. When ordering
separately, specify finish.
OPTIONAL “EZ” TURN
L583-363
Available for rose and
escutcheon trim. Disability
turn (ADA) option to standard
thumbturn. Can be used with
any thumbturn function
L-Series lock, except L9463
and L463. Specify lock per
L583-363 when ordering.
625
625
COIN TURN L283-124
For lock functions L9044 and
L9444 with rose trim.
When ordering separately,
specify 09-509 and finish per
L283-124.
625
Loading...